summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/mvebu
AgeCommit message (Collapse)Author
2018-06-29pinctrl: armada-37xx: add suspend/resume supportMiquel Raynal
Add suspend/resume hooks in pinctrl driver to handle S2RAM operations. Beyond the traditional register save/restore operations, these hooks also keep the GPIOs used for both-edge IRQ synchronized between their level (low/high) and expected IRQ polarity (falling/rising edge). Since pinctrl is an infrastructure module, its resume should be issued prior to other IO drivers. The pinctrl PM operations are requested at early/late stages for this reason. Suggested-by: Ken Ma <make@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: devm_kmalloc() -> devm_kmalloc_array()Kees Cook
The devm_kmalloc() function has a 2-factor argument form, devm_kmalloc_array(). This patch replaces cases of: devm_kmalloc(handle, a * b, gfp) with: devm_kmalloc_array(handle, a * b, gfp) as well as handling cases of: devm_kmalloc(handle, a * b * c, gfp) with: devm_kmalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kmalloc_array(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kmalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kmalloc..." instead of "= devm_kmalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kmalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kmalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kmalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kmalloc + devm_kmalloc_array (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kmalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kmalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kmalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kmalloc(HANDLE, C1 * C2 * C3, ...) | devm_kmalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kmalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kmalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kmalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kmalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kmalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kmalloc(HANDLE, C1 * C2 * C3, ...) | devm_kmalloc(HANDLE, C1 * C2, ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-24pinctrl: armada-37xx: Fix spurious irq managementTerry Zhou
Until now, if we found spurious irq in irq_handler, we only updated the status in register but not the status in the code. Due to this the system will got stuck dues to the infinite loop [gregory.clement@bootlin.com: update comment and add fix and stable tags] Fixes: 30ac0d3b0702 ("pinctrl: armada-37xx: Add edge both type gpio irq support") Cc: <stable@vger.kernel.org> Signed-off-by: Terry Zhou <bjzhou@marvell.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-23pinctrl: mvebu: update use "nand" function for "rb" pinChris Packham
The Armada 98dx3236 SoCs don't have a different MPP sel value for nand specific pins so "dev" was technically correct. But all the other Armada SoCs use "nand" in their dts and the pin is specific to the nand interface so use "nand" for the function name. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16pinctrl: mvebu: use correct MPP sel value for dev pinsChris Packham
The "dev" function is selected with the value 0x4 not 0x01. Fixes: commit d7ae8f8dee7f ("pinctrl: mvebu: pinctrl driver for 98DX3236 SoC") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-16pinctrl: armada-37xx: Convert to use match_string() helperAndy Shevchenko
The new helper returns index of the matching string in an array. We are going to use it here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-02Merge tag 'pinctrl-v4.16-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.16 kernel cycle. Like with GPIO it is actually a bit calm this time. Core changes: - After lengthy discussions and partly due to my ignorance, we have merged a patch making pinctrl_force_default() and pinctrl_force_sleep() reprogram the states into the hardware of any hogged pins, even if they are already in the desired state. This only apply to hogged pins since groups of pins owned by drivers need to be managed by each driver, lest they could not do things like runtime PM and put pins to sleeping state even if the system as a whole is not in sleep. New drivers: - New driver for the Microsemi Ocelot SoC. This is used in ethernet switches. - The X-Powers AXP209 GPIO driver was extended to also deal with pin control and moved over from the GPIO subsystem. This circuit is a mixed-mode integrated circuit which is part of AllWinner designs. - New subdriver for the Qualcomm MSM8998 SoC, core of a high end mobile devices (phones) chipset. - New subdriver for the ST Microelectronics STM32MP157 MPU and STM32F769 MCU from the STM32 family. - New subdriver for the MediaTek MT7622 SoC. This is used for routers, repeater, gateways and such network infrastructure. - New subdriver for the NXP (former Freescale) i.MX 6ULL. This SoC has multimedia features and target "smart devices", I guess in-car entertainment, in-flight entertainment, industrial control panels etc. General improvements: - Incremental improvements on the SH-PFC subdrivers for things like the CAN bus. - Enable the glitch filter on Baytrail GPIOs used for interrupts. - Proper handling of pins to GPIO ranges on the Semtec SX150X - An IRQ setup ordering fix on MCP23S08. - A good set of janitorial coding style fixes" * tag 'pinctrl-v4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (102 commits) pinctrl: mcp23s08: fix irq setup order pinctrl: Forward declare struct device pinctrl: sunxi: Use of_clk_get_parent_count() instead of open coding pinctrl: stm32: add STM32F769 MCU support pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping pinctrl: sx150x: Register pinctrl before adding the gpiochip pinctrl: sx150x: Unregister the pinctrl on release pinctrl: ingenic: Remove redundant dev_err call in ingenic_pinctrl_probe() pinctrl: sprd: Use seq_putc() in sprd_pinconf_group_dbg_show() pinctrl: pinmux: Use seq_putc() in pinmux_pins_show() pinctrl: abx500: Use seq_putc() in abx500_gpio_dbg_show() pinctrl: mediatek: mt7622: align error handling of mtk_hw_get_value call pinctrl: mediatek: mt7622: fix potential uninitialized value being returned pinctrl: uniphier: refactor drive strength get/set functions pinctrl: imx7ulp: constify struct imx_cfg_params_decode pinctrl: imx: constify struct imx_pinctrl_soc_info pinctrl: imx7d: simplify imx7d_pinctrl_probe pinctrl: imx: use struct imx_pinctrl_soc_info as a const pinctrl: sunxi-pinctrl: fix pin funtion can not be match correctly. pinctrl: qcom: Add msm8998 pinctrl driver ...
2018-01-08pinctrl: armada-37xx: account for const type of of_device_id.dataJulia Lawall
The data field of an of_device_id structure has type const void *, so there is no need for a const-discarding cast when putting const values into such a structure. Done using Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20pinctrl: mvebu: Delete an error message for a failed memory allocation in ↵Markus Elfring
mvebu_pinctrl_probe() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-29pinctrl: armada-37xx: Fix direction_output() callback behaviorGregory CLEMENT
The direction_output callback of the gpio_chip structure is supposed to set the output direction but also to set the value of the gpio. For the armada-37xx driver this callback acted as the gpio_set_direction callback for the pinctrl. This patch fixes the behavior of the direction_output callback by also applying the value received as parameter. Cc: stable@vger.kernel.org Fixes: 5715092a458c ("pinctrl: armada-37xx: Add gpio support") Reported-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-16Merge tag 'pinctrl-v4.15-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.15 kernel cycle: Core: - The pin control Kconfig entry PINCTRL is now turned into a menuconfig option. This obviously has the implication of making the subsystem menu visible in menuconfig. This is happening because of two things: (a) Intel have started to deploy and depend on pin controllers in a way that is affecting users directly. This happens on the highly integrated laptop chipsets named after geographical places: baytrail, broxton, cannonlake, cedarfork, cherryview, denverton, geminilake, lewisburg, merrifield, sunrisepoint... It started a while back and now it is ever more evident that this is crucial infrastructure for x86 laptops and not an embedded obscurity anymore. Users need to be aware. (b) Pin control expanders on I2C and SPI that are arch-agnostic. Currently Semtech SX150X and Microchip MCP28x08 but more are expected. Users will have to be able to configure these in directly for their set-up. - Just go and select GPIOLIB now that we made sure that GPIOLIB is a very vanilla subsystem. Do not depend on it, if we need it, select it. - Exposing the pin control subsystem in menuconfig uncovered a bunch of obscure bugs that are now hopefully fixed, all more or less pertaining to Blackfin. - Unified namespace for cross-calls between pin control and GPIO. - New support for clock skew/delay generic DT bindings and generic pin config options for this. - Minor documentation improvements. Various: - The Renesas SH-PFC pin controller has evolved a lot. It seems Renesas are churning out new SoCs by the minute. - A bunch of non-critical fixes for the Rockchip driver. - Improve the use of library functions instead of open coding. - Support the MCP28018 variant in the MCP28x08 driver. - Static constifying" * tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits) pinctrl: gemini: Fix missing pad descriptions pinctrl: Add some depends on HAS_IOMEM pinctrl: samsung/s3c24xx: add CONFIG_OF dependency pinctrl: gemini: Fix GMAC groups pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support pinctrl: ti-iodelay: remove redundant unused variable dev pinctrl: max77620: Use common error handling code in max77620_pinconf_set() pinctrl: gemini: Implement clock skew/delay config pinctrl: gemini: Use generic DT parser pinctrl: Add skew-delay pin config and bindings pinctrl: armada-37xx: Add edge both type gpio irq support pinctrl: uniphier: remove eMMC hardware reset pin-mux pinctrl: rockchip: Add iomux-route switching support for rk3288 pinctrl: intel: Add Intel Cedar Fork PCH pin controller support pinctrl: intel: Make offset to interrupt status register configurable pinctrl: sunxi: Enforce the strict mode by default pinctrl: sunxi: Disable strict mode for old pinctrl drivers pinctrl: sunxi: Introduce the strict flag pinctrl: sh-pfc: Save/restore registers for PSCI system suspend pinctrl: sh-pfc: r8a7796: Use generic IOCTRL register description ...
2017-11-14Merge tag 'gpio-v4.15-1' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.15 kernel cycle: Core: - Fix the semantics of raw GPIO to actually be raw. No inversion semantics as before, but also no open draining, and allow the raw operations to affect lines used for interrupts as the caller supposedly knows what they are doing if they are getting the big hammer. - Rewrote the __inner_function() notation calls to names that make more sense. I just find this kind of code disturbing. - Drop the .irq_base() field from the gpiochip since now all IRQs are mapped dynamically. This is nice. - Support for .get_multiple() in the core driver API. This allows us to read several GPIO lines with a single register read. This has high value for some usecases: it can be used to create oscilloscopes and signal analyzers and other things that rely on reading several lines at exactly the same instant. Also a generally nice optimization. This uses the new assign_bit() macro from the bitops lib that was ACKed by Andrew Morton and is implemented for two drivers, one of them being the generic MMIO driver so everyone using that will be able to benefit from this. - Do not allow requests of Open Drain and Open Source setting of a GPIO line simultaneously. If the hardware actually supports enabling both at the same time the electrical result would be disastrous. - A new interrupt chip core helper. This will be helpful to deal with "banked" GPIOs, which means GPIO controllers with several logical blocks of GPIO inside them. This is several gpiochips per device in the device model, in contrast to the case when there is a 1-to-1 relationship between a device and a gpiochip. New drivers: - Maxim MAX3191x industrial serializer, a very interesting piece of professional I/O hardware. - Uniphier GPIO driver. This is the GPIO block from the recent Socionext (ex Fujitsu and Panasonic) platform. - Tegra 186 driver. This is based on the new banked GPIO infrastructure. Other improvements: - Some documentation improvements. - Wakeup support for the DesignWare DWAPB GPIO controller. - Reset line support on the DesignWare DWAPB GPIO controller. - Several non-critical bug fixes and improvements for the Broadcom BRCMSTB driver. - Misc non-critical bug fixes like exotic errorpaths, removal of dead code etc. - Explicit comments on fall-through switch() statements" * tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits) gpio: tegra186: Remove tegra186_gpio_lock_class gpio: rcar: Add r8a77995 (R-Car D3) support pinctrl: bcm2835: Fix some merge fallout gpio: Fix undefined lock_dep_class gpio: Automatically add lockdep keys gpio: Introduce struct gpio_irq_chip.first gpio: Disambiguate struct gpio_irq_chip.nested gpio: Add Tegra186 support gpio: Export gpiochip_irq_{map,unmap}() gpio: Implement tighter IRQ chip integration gpio: Move lock_key into struct gpio_irq_chip gpio: Move irq_valid_mask into struct gpio_irq_chip gpio: Move irq_nested into struct gpio_irq_chip gpio: Move irq_chained_parent to struct gpio_irq_chip gpio: Move irq_default_type to struct gpio_irq_chip gpio: Move irq_handler to struct gpio_irq_chip gpio: Move irqdomain into struct gpio_irq_chip gpio: Move irqchip into struct gpio_irq_chip gpio: Introduce struct gpio_irq_chip pinctrl: armada-37xx: remove unused variable ...
2017-11-09Merge branch 'gpio-irqchip-rework' of /home/linus/linux-gpio into develLinus Walleij
2017-11-08gpio: Move irqdomain into struct gpio_irq_chipThierry Reding
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-03pinctrl: armada-37xx: remove unused variableArnd Bergmann
A cleanup left behind a temporary variable that is now unused: drivers/pinctrl/mvebu/pinctrl-armada-37xx.c: In function 'armada_37xx_irq_startup': drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:693:20: error: unused variable 'chip' [-Werror=unused-variable] This removes the declarations as well. Fixes: 3ee9e605caea ("pinctrl: armada-37xx: Stop using struct gpio_chip.irq_base") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-31pinctrl: armada-37xx: Add edge both type gpio irq supportKen Ma
Current edge both type gpio irqs which need to swap polarity in each interrupt are not supported, this patch adds edge both type gpio irq support. Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-10-19pinctrl: armada-37xx: Stop using struct gpio_chip.irq_baseThierry Reding
The Armada 37xx driver always initializes the IRQ base to 0, hence the subtraction is a no-op. Remove the subtraction and thereby the last user of struct gpio_chip's .irq_base field. Note that this was also actually a bug and only worked because of the above assumption. If the IRQ base had been dynamically allocated, the subtraction would've caused the wrong mask to be generated since the struct irq_data.hwirq field is an index local to the IRQ domain. As a result, it should now be safe to also allocate this chip's IRQ base dynamically, unless there are consumers left that refer to the IRQs by their global number. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-09-12pinctrl: armada-37xx: Fix gpio interrupt setupGregory CLEMENT
Since commit dc749a09ea5e ("gpiolib: allow gpio irqchip to map irqs dynamically"), the irqs for gpio are not statically allocated during in gpiochip_irqchip_add. This driver was based on this assumption for initializing the mask associated to each interrupt this led to a NULL pointer crash in the kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 Mem abort info: Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000068 CM = 0, WnR = 1 [0000000000000000] user address but active_mm is swapper Internal error: Oops: 96000044 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-06657-g3b9f8ed25dbe #576 Hardware name: Marvell Armada 3720 Development Board DB-88F3720-DDR3 (DT) task: ffff80001d908000 task.stack: ffff000008068000 PC is at armada_37xx_pinctrl_probe+0x5f8/0x670 LR is at armada_37xx_pinctrl_probe+0x5e8/0x670 pc : [<ffff000008e25cdc>] lr : [<ffff000008e25ccc>] pstate: 60000045 sp : ffff00000806bb80 x29: ffff00000806bb80 x28: 0000000000000024 x27: 000000000000000c x26: 0000000000000001 x25: ffff80001efee760 x24: 0000000000000000 x23: ffff80001db6f570 x22: ffff80001db6f438 x21: 0000000000000000 x20: ffff80001d9f4810 x19: ffff80001db6f418 x18: 0000000000000000 x17: 0000000000000001 x16: 0000000000000019 x15: ffffffffffffffff x14: 0140000000000000 x13: 0000000000000000 x12: 0000000000000030 x11: 0101010101010101 x10: 0000000000000040 x9 : ffff000009923580 x8 : ffff80001d400248 x7 : ffff80001d400270 x6 : 0000000000000000 x5 : ffff80001d400248 x4 : ffff80001d400270 x3 : 0000000000000000 x2 : 0000000000000001 x1 : 0000000000000001 x0 : 0000000000000000 Process swapper/0 (pid: 1, stack limit = 0xffff000008068000) Call trace: Exception stack(0xffff00000806ba40 to 0xffff00000806bb80) ba40: 0000000000000000 0000000000000001 0000000000000001 0000000000000000 ba60: ffff80001d400270 ffff80001d400248 0000000000000000 ffff80001d400270 ba80: ffff80001d400248 ffff000009923580 0000000000000040 0101010101010101 baa0: 0000000000000030 0000000000000000 0140000000000000 ffffffffffffffff bac0: 0000000000000019 0000000000000001 0000000000000000 ffff80001db6f418 bae0: ffff80001d9f4810 0000000000000000 ffff80001db6f438 ffff80001db6f570 bb00: 0000000000000000 ffff80001efee760 0000000000000001 000000000000000c bb20: 0000000000000024 ffff00000806bb80 ffff000008e25ccc ffff00000806bb80 bb40: ffff000008e25cdc 0000000060000045 ffff00000806bb60 ffff0000081189b8 bb60: ffffffffffffffff ffff00000811cf1c ffff00000806bb80 ffff000008e25cdc [<ffff000008e25cdc>] armada_37xx_pinctrl_probe+0x5f8/0x670 [<ffff00000859d8c8>] platform_drv_probe+0x58/0xb8 [<ffff00000859bb44>] driver_probe_device+0x22c/0x2d8 [<ffff00000859bcac>] __driver_attach+0xbc/0xc0 [<ffff000008599c84>] bus_for_each_dev+0x4c/0x98 [<ffff00000859b440>] driver_attach+0x20/0x28 [<ffff00000859af90>] bus_add_driver+0x1b8/0x228 [<ffff00000859c648>] driver_register+0x60/0xf8 [<ffff00000859df64>] __platform_driver_probe+0x74/0x130 [<ffff000008e256dc>] armada_37xx_pinctrl_driver_init+0x20/0x28 [<ffff000008083980>] do_one_initcall+0x38/0x128 [<ffff000008e00cf4>] kernel_init_freeable+0x188/0x22c [<ffff0000089b56e8>] kernel_init+0x10/0x100 [<ffff000008084bb0>] ret_from_fork+0x10/0x18 Code: f9403fa2 12001341 1100075a 9ac12041 (b9000001) ---[ end trace 8b0f4e05e1603208 ]--- This patch moves the initialization of the mask field in the irq_startup function. However some callbacks such as irq_set_type and irq_set_wake could be called before irq_startup. For those functions the mask is computed at each call which is not a issue as these functions are not located in a hot path but are used sporadically for configuration. Fixes: dc749a09ea5e ("gpiolib: allow gpio irqchip to map irqs dynamically") Cc: <stable@vger.kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: armada-37xx: constify pinconf_ops, pinctrl_ops, and pinmux_ops ↵Julia Lawall
structures This pinconf_ops structure is only stored in the const pinconf_ops field of a pinctrl_desc structure. Make the pinconf_ops structure const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14pinctrl: armada-37xx: add static to local dataMasahiro Yamada
Detected by sparse. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-07pinctrl: armada-37xx: Fix number of pin in south bridgeGregory CLEMENT
On the south bridge we have pin from to 29, so it gives 30 pins (and not 29). Without this patch the kernel complain with the following traces: cat /sys/kernel/debug/pinctrl/d0018800.pinctrl/pingroups [ 154.530205] armada-37xx-pinctrl d0018800.pinctrl: failed to get pin(29) name [ 154.537567] ------------[ cut here ]------------ [ 154.542348] WARNING: CPU: 1 PID: 1347 at /home/gclement/open/kernel/marvell-mainline-linux/drivers/pinctrl/core.c:1610 pinctrl_groups_show+0x15c/0x1a0 [ 154.555918] Modules linked in: [ 154.558890] CPU: 1 PID: 1347 Comm: cat Tainted: G W 4.13.0-rc1-00001-g19e1b9fa219d #525 [ 154.568316] Hardware name: Marvell Armada 3720 Development Board DB-88F3720-DDR3 (DT) [ 154.576311] task: ffff80001d32d100 task.stack: ffff80001bdc0000 [ 154.583048] PC is at pinctrl_groups_show+0x15c/0x1a0 [ 154.587816] LR is at pinctrl_groups_show+0x148/0x1a0 [ 154.592847] pc : [<ffff0000083e3adc>] lr : [<ffff0000083e3ac8>] pstate: 00000145 [ 154.600840] sp : ffff80001bdc3c80 [ 154.604255] x29: ffff80001bdc3c80 x28: 00000000f7750000 [ 154.609825] x27: ffff80001d05d198 x26: 0000000000000009 [ 154.615224] x25: ffff0000089ead20 x24: 0000000000000002 [ 154.620705] x23: ffff000008c8e1d0 x22: ffff80001be55700 [ 154.626187] x21: ffff80001d05d100 x20: 0000000000000005 [ 154.631667] x19: 0000000000000006 x18: 0000000000000010 [ 154.637238] x17: 0000000000000000 x16: ffff0000081fc4b8 [ 154.642726] x15: 0000000000000006 x14: ffff0000899e537f [ 154.648214] x13: ffff0000099e538d x12: 206f742064656c69 [ 154.653613] x11: 6166203a6c727463 x10: 0000000005f5e0ff [ 154.659094] x9 : ffff80001bdc38c0 x8 : 286e697020746567 [ 154.664576] x7 : ffff000008551870 x6 : 000000000000011b [ 154.670146] x5 : 0000000000000000 x4 : 0000000000000000 [ 154.675544] x3 : 0000000000000000 x2 : 0000000000000000 [ 154.681025] x1 : ffff000008c8e1d0 x0 : ffff80001be55700 [ 154.686507] Call trace: [ 154.688668] Exception stack(0xffff80001bdc3ab0 to 0xffff80001bdc3be0) [ 154.695224] 3aa0: 0000000000000006 0001000000000000 [ 154.703310] 3ac0: ffff80001bdc3c80 ffff0000083e3adc ffff80001bdc3bb0 00000000ffffffd8 [ 154.711304] 3ae0: 4554535953425553 6f6674616c703d4d 4349564544006d72 6674616c702b3d45 [ 154.719478] 3b00: 313030643a6d726f 6e69702e30303838 ffff80006c727463 ffff0000089635d8 [ 154.727562] 3b20: ffff80001d1ca0cb ffff000008af0fa4 ffff80001bdc3b40 ffff000008c8e1dc [ 154.735648] 3b40: ffff80001bdc3bc0 ffff000008223174 ffff80001be55700 ffff000008c8e1d0 [ 154.743731] 3b60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 154.752354] 3b80: 000000000000011b ffff000008551870 286e697020746567 ffff80001bdc38c0 [ 154.760446] 3ba0: 0000000005f5e0ff 6166203a6c727463 206f742064656c69 ffff0000099e538d [ 154.767910] 3bc0: ffff0000899e537f 0000000000000006 ffff0000081fc4b8 0000000000000000 [ 154.776085] [<ffff0000083e3adc>] pinctrl_groups_show+0x15c/0x1a0 [ 154.782823] [<ffff000008222abc>] seq_read+0x184/0x460 [ 154.787505] [<ffff000008344120>] full_proxy_read+0x60/0xa8 [ 154.793431] [<ffff0000081f9bec>] __vfs_read+0x1c/0x110 [ 154.799001] [<ffff0000081faff4>] vfs_read+0x84/0x140 [ 154.803860] [<ffff0000081fc4fc>] SyS_read+0x44/0xa0 [ 154.808983] [<ffff000008082f30>] el0_svc_naked+0x24/0x28 [ 154.814459] ---[ end trace 4cbb00a92d616b95 ]--- Cc: stable@vger.kernel.org Fixes: 87466ccd9401 ("pinctrl: armada-37xx: Add pin controller support for Armada 37xx") Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-07pinctrl: armada-37xx: Fix the pin 23 on south bridgeGregory CLEMENT
Pin 23 on South bridge does not belong to the rgmii group. It belongs to a separate group which can have 3 functions. Due to this the fix also have to update the way the functions are managed. Until now each groups used NB_FUNCS(which was 2) functions. For the mpp23, 3 functions are available but it is the only group which needs it, so on the loop involving NB_FUNCS an extra test was added to handle only the functions added. The bug was visible with the merge of the commit 07d065abf93d "arm64: dts: marvell: armada-3720-db: Add vqmmc regulator for SD slot", the gpio regulator used the gpio 23, due to this the whole rgmii group was setup to gpio which broke the Ethernet support on the Armada 3720 DB board. Thanks to this patch, the UHS SD cards (which need the vqmmc) _and_ the Ethernet work again. Cc: stable@vger.kernel.org Fixes: 87466ccd9401 ("pinctrl: armada-37xx: Add pin controller support for Armada 37xx") Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29pinctrl: armada-37xx: Fix number of pin in sdio_sbGregory CLEMENT
The sdio_sb group is composed of 6 pins and not 5. Reported-by: Ken Ma <make@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-29pinctrl: armada-37xx: Fix uart2 group selection register maskKen Ma
If north bridge selection register bit1 is clear, pins [10:8] are for SDIO0 Resetn, Wakeup, and PDN while if bit1 is set, pins [10:8]are for GPIO; when bit1 is clear, pin 9 and pin 10 can be used for uart2 RTSn and CTSn, so bit1 should be added to uart2 group and it must be set for both "gpio" and "uart" functions of uart2 group. Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16pinctrl: mvebu: add driver for Armada CP110 pinctrlHanna Hawa
This commit adds a pinctrl driver for the CP110 part of the Marvell Armada 7K and 8K SoCs. The Armada 7K has a single CP110, where almost all the MPP pins are available. On the other side, the Armada 8K has two CP110, and the available MPPs are split between the master CP110 (MPPs 32 to 62) and the slave CP110 (MPPs 0 to 31). The register interface to control the MPPs is however the same as all other mvebu SoCs, so we can reuse the common pinctrl-mvebu.c logic. Signed-off-by: Hanna Hawa <hannah@marvell.com> Reviewed-by: Shadi Ammouri <shadi@marvell.com> [updated for mvebu pinctrl and 4.9 changes: - converted to simple_mmio - converted to syscon/regmap - removed unimplemented .remove function - dropped DTS changes - defered gpio ranges to DT - fixed warning - properly set soc->nmodes -- rmk] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [ add missing MPP[61:56] function 14 (SDIO) -- Konstantin Porotchkin] Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> [ allow to properly register more then one instance of this driver -- Grzegorz Jaszczyk] Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> [ - rebased on 4.12-rc1 - fixed the 80 character limit for mvebu_mpp_mode array - aligned the compatible name on the ones already used - fixed the MPP table for CP110: some MPP are not available on Armada 7K -- Gregory CLEMENT] Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16pinctrl: mvebu: add driver for Armada AP806 pinctrlHanna Hawa
This commit adds a pinctrl driver for the pin-muxing controller found in the AP806 part of the Marvell Armada 7K and 8K SoCs. Its register interface is compatible with the one used by previous mvebu pin controllers, so the common logic in drivers/pinctrl/mvebu/pinctrl-mvebu.c is used. Signed-off-by: Hanna Hawa <hannah@marvell.com> Reviewed-by: Shadi Ammouri <shadi@marvell.com> [updated for mvebu pinctrl changes - converted to simple_mmio - removed unimplemented .remove function - removed DTS description - converted to use syscon/regmap --rmk] Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16pinctrl: avoid PLAT_ORION dependencyRussell King
Armada 8040 also needs orion pinctrl, and as these symbols are only selected, there's no need to make them depend on PLAT_ORION. Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16pinctrl: mvebu: remove the offset property for regmapGregory CLEMENT
The offset property of the pinctrl node, when a regmap is used in the device tree, was never used nor documented in the binding. Moreover, the compatible string is enough to let the driver know which offset using. So this patch removes the property and move the information at the driver level. Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-22pinctrl: armada-37xx: Add irqchip supportGregory CLEMENT
The Armada 37xx SoCs can handle interrupt through GPIO. However it can only manage the edge ones. The way the interrupt are managed is classical so we can use the generic interrupt chip model. The only unusual "feature" is that many interrupts are connected to the parent interrupt controller. But we do not take advantage of this and use the chained irq with all of them. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24pinctrl: armada-37xx: Add gpio supportGregory CLEMENT
GPIO management is pretty simple and is part of the same IP than the pin controller for the Armada 37xx SoCs. This patch adds the GPIO support to the pinctrl-armada-37xx.c file, it also allows sharing common functions between the gpiolib and the pinctrl drivers. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-24pinctrl: armada-37xx: Add pin controller support for Armada 37xxGregory CLEMENT
The Armada 37xx SoC come with 2 pin controllers: one on the south bridge (managing 28 pins) and one on the north bridge (managing 36 pins). At the hardware level the controller configure the pins by group and not pin by pin. This constraint is reflected in the design of the driver: only the group related functions are implemented. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-13pinctrl: mvebu: make bool drivers explicitly non-modularPaul Gortmaker
None of the Kconfigs for any of these drivers are tristate, meaning that they currently are not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the drivers there is no doubt they are builtin-only. All drivers get the exact same change, so they are handled in batch. Changes are (1) use builtin_platform_driver, (2) dont use module.h (3) delete module_exit related code, (4) delete MODULE_DEVICE_TABLE, and (5) delete MODULE_LICENCE/MODULE_AUTHOR and associated tags. For the dove driver we explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. We deleted the MODULE_LICENSE etc. tags since all that information is already contained at the top of the file in the comments. Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30Merge branch 'ib-mvebu-98dx3236' into develLinus Walleij
2017-01-30pinctrl: mvebu: pinctrl driver for 98DX3236 SoCKalyan Kinthada
This pinctrl driver supports the 98DX3236, 98DX3336 and 98DX4251 SoCs from Marvell. Signed-off-by: Kalyan Kinthada <kalyan.kinthada@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26pinctrl: mvebu: remove unused variableArnd Bergmann
A cleanup caused a harmless warning: drivers/pinctrl/mvebu/pinctrl-kirkwood.c: In function 'kirkwood_pinctrl_probe': drivers/pinctrl/mvebu/pinctrl-kirkwood.c:460:19: error: unused variable 'res' [-Werror=unused-variable] The obvious fix is to remove the declaration of the now unused variable. Fixes: ad9ec4ecee68 ("pinctrl: mvebu: switch drivers to generic simple mmio") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-18pinctrl: mvebu: add simple regmap based pinctrl implementationRussell King
Add a simple regmap based pinctrl implementation for mvebu, for syscon based regmap drivers. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-18pinctrl: mvebu: switch drivers to generic simple mmioRussell King
Move the mvebu pinctrl drivers over to the generic simple mmio implementation, saving a substantial number of lines of code in the process. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-18pinctrl: mvebu: provide generic simple mmio-based implementationRussell King
Provide a generic simple mmio-based probe function and methods, which pinctrl drivers can use to initialise the mvebu pinctrl subsystem. Most mvebu pinctrl drivers can use this. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-18pinctrl: mvebu: provide per-control private dataRussell King
Provide per-control private data into each mvebu pinctrl method, which will allow us to provide some completely generic helpers without the global variable and per-instance function definitions that would be required when we have multiple pin controllers on a SoC. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-18pinctrl: mvebu: constify mvebu_mpp_ctrl structuresRussell King
As the mvebu_mpp_ctrl structures contain function pointers, it is preferable for these to be made read-only to prevent the function pointers being modified. So make these const. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-17pinctrl: mvebu: Use seq_putc() in mvebu_pinconf_group_dbg_show()Markus Elfring
Single characters should be put into a sequence. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-17pinctrl: mvebu: Use seq_puts() in mvebu_pinconf_group_dbg_show()Markus Elfring
Strings which did not contain data format specifications should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-17pinctrl: mvebu: Delete an unnecessary return statement in ↵Markus Elfring
mvebu_pinconf_group_dbg_show() The script "checkpatch.pl" pointed information out like the following. WARNING: void function return statements are not generally useful Thus remove such a statement in the affected function. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-17pinctrl: mvebu: Delete an error message for a failed memory allocation in ↵Markus Elfring
three functions The script "checkpatch.pl" pointed information out like the following. WARNING: Possible unnecessary 'out of memory' message Thus fix the affected source code places. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-17pinctrl: mvebu: Use kmalloc_array() in mvebu_pinctrl_dt_node_to_map()Markus Elfring
* A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. * Replace the specification of a data structure by a pointer dereference to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-21pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181Jamie Lentin
As far as I'm aware the mv88f5181-b1 and mv88f5181l are the same at the pinctrl level, so re-use the definitions for both. [gregory.clement@free-electrons.com: fix commit title] Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-07-24pinctrl: fix pincontrol definition for marvellAndreas Klinger
On Marvell mv88f6180 with pin control driver one can not use multi purpose pins 35 through 44. I'm using this controller on an embedded board and i found that the pin multiplexing is not the same as in the hardware spezification. This patch alters the pin description so that mpp pins 0 to 19 as well as 35 to 44 are usable. Pin settings i used can be found here: http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6180_OpenSource.pdf Signed-off-by: Andreas Klinger <ak@it-klinger.de> Reviewed-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-21pinctrl: mvebu: Use devm_pinctrl_register() for pinctrl registrationLaxman Dewangan
Use devm_pinctrl_register() for pin control registration and remove need of .remove callback. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Hongzhou Yang <hongzhou.yang@mediatek.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Andrew Andrianov <andrew@ncrmnt.org> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 02:55:13 +0000