summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/intel
AgeCommit message (Collapse)Author
2016-07-28Merge tag 'pinctrl-v4.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.8 kernel cycle. Nothing stands out as especially exiting: new drivers, new subdrivers, lots of cleanups and incremental features. Business as usual. New drivers: - New driver for Oxnas pin control and GPIO. This ARM-based chipset is used in a few storage (NAS) type devices. - New driver for the MAX77620/MAX20024 pin controller portions. - New driver for the Intel Merrifield pin controller. New subdrivers: - New subdriver for the Qualcomm MDM9615 - New subdriver for the STM32F746 MCU - New subdriver for the Broadcom NSP SoC. Cleanups: - Demodularization of bool compiled-in drivers. Apart from this there is just regular incremental improvements to a lot of drivers, especially Uniphier and PFC" * tag 'pinctrl-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (131 commits) pinctrl: fix pincontrol definition for marvell pinctrl: xway: fix typo Revert "pinctrl: amd: make it explicitly non-modular" pinctrl: iproc: Add NSP and Stingray GPIO support pinctrl: Update iProc GPIO DT bindings pinctrl: bcm: add OF dependencies pinctrl: ns2: remove redundant dev_err call in ns2_pinmux_probe() pinctrl: Add STM32F746 MCU support pinctrl: intel: Protect set wake flow by spin lock pinctrl: nsp: remove redundant dev_err call in nsp_pinmux_probe() pinctrl: uniphier: add Ethernet pin-mux settings sh-pfc: Use PTR_ERR_OR_ZERO() to simplify the code pinctrl: ns2: fix return value check in ns2_pinmux_probe() pinctrl: qcom: update DT bindings with ebi2 groups pinctrl: qcom: establish proper EBI2 pin groups pinctrl: imx21: Remove the MODULE_DEVICE_TABLE() macro Documentation: dt: Add new compatible to STM32 pinctrl driver bindings includes: dt-bindings: Add STM32F746 pinctrl DT bindings pinctrl: sunxi: fix nand0 function name for sun8i pinctrl: uniphier: remove pointless pin-mux settings for PH1-LD11 ...
2016-07-11pinctrl: intel: Protect set wake flow by spin lockAndy Shevchenko
It seems intel_gpio_irq_wake() misses lock protection against I/O flow. Use spin lock here as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: intel: Add Intel Merrifield pin controller supportAndy Shevchenko
This driver adds pinctrl support for Intel Merrifield. The IP block which is called Family-Level Interface Shim is a separate entity in SoC. The GPIO driver (gpio-intel-mid.c) will be updated accordingly to support pinctrl interface. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23pinctrl: baytrail: Fix mingled clock pinsCristina Ciocan
Fix plt clock 3, 4 and 5 pins, which were not in the proper order. Signed-off-by: Cristina Ciocan <cristina.ciocan@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-18pinctrl: intel: Prevent force threading of the interrupt handlerMika Westerberg
The pinctrl-intel needs to use request_irq() instead of chained interrupt handling because it shares the interrupt with multiple GPIO host controllers found on Intel CPUs. In -rt all such interrupts are forced to run in thread context which triggers following warning: WARNING: CPU: 0 PID: 530 at kernel/irq/handle.c:151 handle_irq_event_percpu+0x23d/0x240 irq 348 handler irq_default_primary_handler+0x0/0x10 enabled interrupts Modules linked in: CPU: 0 PID: 530 Comm: irq/14-INT3452: Not tainted 4.6.2-rt5 #1060 0000000000000000 ffff88007a257c98 ffffffff812d8494 ffff88007a257ce8 0000000000000000 ffff88007a257cd8 ffffffff8105e554 000000977a257d90 ffff88007a37a380 000000000000015c 0000000000000002 0000000000000000 Call Trace: [<ffffffff812d8494>] dump_stack+0x4f/0x6b [<ffffffff8105e554>] __warn+0xe4/0x100 [<ffffffff8105e5bf>] warn_slowpath_fmt+0x4f/0x60 [<ffffffff810b18f0>] ? __synchronize_hardirq+0x60/0x60 [<ffffffff810b17fd>] handle_irq_event_percpu+0x23d/0x240 [<ffffffff810b1862>] handle_irq_event+0x62/0x90 [<ffffffff810b4e1f>] handle_edge_irq+0x8f/0x190 [<ffffffff810b0d82>] generic_handle_irq+0x22/0x30 [<ffffffff81307abc>] intel_gpio_irq+0xdc/0x150 [<ffffffff810b2293>] irq_forced_thread_fn+0x23/0x70 [<ffffffff810b250b>] irq_thread+0x13b/0x1d0 [<ffffffff8167b844>] ? __schedule+0x2e4/0x5a0 [<ffffffff810b2270>] ? irq_finalize_oneshot.part.37+0xd0/0xd0 [<ffffffff810b25a0>] ? irq_thread+0x1d0/0x1d0 [<ffffffff810b23d0>] ? wake_threads_waitq+0x30/0x30 [<ffffffff8107e624>] kthread+0xd4/0xf0 [<ffffffff8167ec27>] ? _raw_spin_unlock_irq+0x17/0x40 [<ffffffff8167f592>] ret_from_fork+0x22/0x40 [<ffffffff8107e550>] ? kthread_worker_fn+0x190/0x190 The handle_irq_event_* functions (and I suppose generic_handle_irq()) is expected to be called with interrupts disabled and they rightfully complain here because we run in thread context with interrupts enabled. Fix this by adding IRQF_NO_THREAD flag when the master interrupt is requested. This prevents forced threading of the interrupt used by the GPIO host controllers. Reported-by: Kim Tatt Chuah <kim.tatt.chuah@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-18pinctrl: intel: Use raw_spinlock for lockingMika Westerberg
When running -rt kernel and GPIO interrupt happens we get following BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:931 in_atomic(): 1, irqs_disabled(): 0, pid: 530, name: irq/14-INT3452: Preemption disabled at:[<ffffffff810b4dab>] handle_edge_irq+0x1b/0x190 CPU: 0 PID: 530 Comm: irq/14-INT3452: Not tainted 4.6.2-rt5 #1060 0000000000000000 ffff88007a257d58 ffffffff812d8494 0000000000000000 ffff88017a330000 ffff88007a257d78 ffffffff81083a11 ffff88007a252430 ffff88007a252430 ffff88007a257d90 ffffffff8167ef20 000000000000001a Call Trace: [<ffffffff812d8494>] dump_stack+0x4f/0x6b [<ffffffff81083a11>] ___might_sleep+0xe1/0x160 [<ffffffff8167ef20>] rt_spin_lock+0x20/0x50 [<ffffffff81308c6d>] intel_gpio_irq_ack+0x2d/0x80 [<ffffffff810b4e0b>] handle_edge_irq+0x7b/0x190 [<ffffffff810b0d82>] generic_handle_irq+0x22/0x30 [<ffffffff81307abc>] intel_gpio_irq+0xdc/0x150 [<ffffffff810b2293>] irq_forced_thread_fn+0x23/0x70 [<ffffffff810b250b>] irq_thread+0x13b/0x1d0 [<ffffffff8167b844>] ? __schedule+0x2e4/0x5a0 [<ffffffff810b2270>] ? irq_finalize_oneshot.part.37+0xd0/0xd0 [<ffffffff810b25a0>] ? irq_thread+0x1d0/0x1d0 [<ffffffff810b23d0>] ? wake_threads_waitq+0x30/0x30 [<ffffffff8107e624>] kthread+0xd4/0xf0 [<ffffffff8167ec27>] ? _raw_spin_unlock_irq+0x17/0x40 [<ffffffff8167f592>] ret_from_fork+0x22/0x40 [<ffffffff8107e550>] ? kthread_worker_fn+0x190/0x190 The reason why this happens is because intel_gpio_irq_ack() is called with desc->lock raw_spinlock locked which cannot sleep but our normal spinlock (which is converted to rtmutex in -rt) is allowed to sleep. This causes might_sleep() to trigger. Fix this by converting the normal spinlock to a raw_spinlock. Reported-by: Kim Tatt Chuah <kim.tatt.chuah@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-15pinctrl/broxton: enable platform device in the absence of ACPI enumerationTan Jui Nee
This is to cater the need for non-ACPI system whereby a platform device has to be created in order to bind with the Apollo Lake Pinctrl GPIO platform driver. Signed-off-by: Tan Jui Nee <jui.nee.tan@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-15pinctrl: cherryview: add handlers for pin_config_group_get/setDan O'Donovan
Pin config get/set handlers for pin groups were previously not implemented by this driver. The pin_config_group_set is particularly useful for applying a common config setting to all pins in a specified group with a single call, without the caller needing to reference each individual pin by name. Signed-off-by: Dan O'Donovan <dan@emutex.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-15pinctrl: cherryview: add option to set open-drain pin configDan O'Donovan
On some CHV platforms, we need an option to configure the open-drain setting for these pins. This adds support for the PIN_CONFIG_DRIVE_PUSH_PULL and PIN_CONFIG_DRIVE_OPEN_DRAIN to disable/enable open-drain mode for a specific pin. Signed-off-by: Dan O'Donovan <dan@emutex.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-15pinctrl: cherryview: prevent concurrent access to GPIO controllersDan O'Donovan
Due to a silicon issue on the Atom X5-Z8000 "Cherry Trail" processor series, a common lock must be used to prevent concurrent accesses across the 4 GPIO controllers managed by this driver. See Intel Atom Z8000 Processor Series Specification Update (Rev. 005), errata #CHT34, for further information. Cc: stable <stable@vger.kernel.org> Signed-off-by: Dan O'Donovan <dan@emutex.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-13pinctrl: baytrail: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: config PINCTRL_BAYTRAIL bool "Intel Baytrail GPIO pin control" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. We explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_init() was already not in use in this driver, we don't have any concerns with init ordering changes here. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-05-26drivers/pinctrl/intel/pinctrl-baytrail.c: fix build with gcc-4.4Andrew Morton
gcc-4.4 and thereabouts has issues with initializers of anonymous unions, and it generates the following warnings: drivers/pinctrl/intel/pinctrl-baytrail.c:413: error: unknown field 'simple_funcs' specified in initializer drivers/pinctrl/intel/pinctrl-baytrail.c:413: warning: missing braces around initializer drivers/pinctrl/intel/pinctrl-baytrail.c:413: warning: (near initialization for 'byt_score_groups[0].<anonymous>') drivers/pinctrl/intel/pinctrl-baytrail.c:415: error: unknown field 'simple_funcs' specified in initializer drivers/pinctrl/intel/pinctrl-baytrail.c:417: error: unknown field 'simple_funcs' specified in initializer ... Work around this. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-19Merge tag 'pinctrl-v4.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This kernel cycle was quite calm when it comes to pin control and there is really just one major change, and that is the introduction of devm_pinctrl_register() managed resources. Apart from that linear development, details below. Core changes: - Add the devm_pinctrl_register() API and switch all applicable drivers to use it, saving lots of lines of code all over the place. New drivers: - driver for the Broadcom NS2 SoC - subdriver for the PXA25x SoCs - subdriver for the AMLogic Meson GXBB SoC Driver improvements: - the Intel Baytrail driver now properly supports pin control - Nomadik, Rockchip, Broadcom BCM2835 support the .get_direction() callback in the GPIO portions - continued development and stabilization of several SH-PFC SoC subdrivers: r8a7795, r8a7790, r8a7794 etc" * tag 'pinctrl-v4.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (85 commits) Revert "pinctrl: tegra: avoid parked_reg and parked_bank" pinctrl: meson: Fix eth_tx_en bit index pinctrl: tegra: avoid parked_reg and parked_bank pinctrl: tegra: Correctly check the supported configuration pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC pinctrl: rockchip: fix pull setting error for rk3399 pinctrl: stm32: Implement .pin_config_dbg_show() pinctrl: nomadik: hide nmk_gpio_get_mode when unused pinctrl: ns2: rename pinctrl_utils_dt_free_map pinctrl: at91: Merge clk_prepare and clk_enable into clk_prepare_enable pinctrl: at91: Make at91_gpio_template const pinctrl: baytrail: fix some error handling in debugfs pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC pinctrl: sirf/atlas7: trivial fix of spelling mistake on flagged pinctrl: sh-pfc: Kill unused variable in sh_pfc_remove() pinctrl: nomadik: implement .get_direction() pinctrl: nomadik: use BIT() with offsets consequently pinctrl: exynos5440: Use off-stack memory for pinctrl_gpio_range pinctrl: zynq: Use devm_pinctrl_register() for pinctrl registration pinctrl: u300: Use devm_pinctrl_register() for pinctrl registration ...
2016-04-30pinctrl: baytrail: fix some error handling in debugfsDan Carpenter
We need to unlock before continuing. Also the continue was accidentally left out on one error path which would lead to a NULL dereference. Fixes: 86e3ef812fe3 ('pinctrl: baytrail: Update gpio chip operations') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-21pinctrl: intel: Use devm_pinctrl_register() for pinctrl registrationLaxman Dewangan
Use devm_pinctrl_register() for pin control registration and clean error path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-21pinctrl: cherryview: Use devm_pinctrl_register() for pinctrl registrationLaxman Dewangan
Use devm_pinctrl_register() for pin control registration and clean error path. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-04pinctrl: baytrail: Add debounce configurationCristina Ciocan
Make debounce setting and getting functionality available when configurating a certain pin. Signed-off-by: Cristina Ciocan <cristina.ciocan@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-04pinctrl: baytrail: Register pin control handlingCristina Ciocan
This patch updates device's probing, removal and irq handling in order to register it as pinctrl device. Pin control data is matched by ACPI UID, since it is passed along as driver data in acpi_device_id structure. Signed-off-by: Cristina Ciocan <cristina.ciocan@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-04pinctrl: baytrail: Update irq chip operationsCristina Ciocan
This patch updates the irq chip implementation in order to interact with the pin control chip model: the chip contains reference to SOC data and pin/group/community information is retrieved through the SOC reference. Signed-off-by: Cristina Ciocan <cristina.ciocan@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-04pinctrl: baytrail: Update gpio chip operationsCristina Ciocan
This patch updates the gpio chip implementation in order to interact with the pin control model: the chip contains reference to SOC data and pin/group/community information is retrieved through the SOC reference. Signed-off-by: Cristina Ciocan <cristina.ciocan@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-04pinctrl: baytrail: Add pin control operationsCristina Ciocan
Add implementation for: - pin control, group information retrieval: count, name and pins - pin muxing: - function information (count, name and groups) - mux setting - gpio control (enable, disable, set direction) - pin configuration: - pull disable - pull up/down and pull strength - debounce - any other option is treated as not supported. Signed-off-by: Cristina Ciocan <cristina.ciocan@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-04pinctrl: baytrail: Add pin control data structuresCristina Ciocan
In order to implement pin control for Baytrail, we need data structures in which to store and pass along pin, group, function, community and SOC data information. Baytrail has 3 GPIO controllers. Add SCORE, NCORE and SUS controller data: - pins (for all controllers), - pad map for pins (for all controllers; we need this since pads are not ordered), - groups (for SCORE and SUS controllers), - functions (for SCORE and SUS controllers), - communities (for all controllers), - soc specific data gathering all of the above and the ACPI UID (for all controllers) This information is useful for pin control functionality. NCORE data is lighter than the other two controllers' due to lack of pin documentation in the public datasheet. Datasheet: http://www.intel.com/content/www/us/en/embedded/products/bay-trail/atom-e3800-family-datasheet.html Signed-off-by: Cristina Ciocan <cristina.ciocan@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30pinctrl: intel: implement gpio_irq_enableQi Zheng
There is unexpected gpio interrupt after irq_enable. If not implemeted gpio_irq_enable callback, irq_enable calls irq_unmask instead. But if there was interrupt set before the irq_enable, unmask it may trigger the unexpected interrupt. By implementing the gpio_irq_enable callback, do interrupt status ack, the issue has gone. Signed-off-by: Qi Zheng <qi.zheng@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-30pinctrl: intel: make the high level interrupt workingQipeng Zha
High level trigger mode of GPIO interrupt is not set correctly in intel_gpio_irq_type(), and will make this kind of interrupt not respond. Signed-off-by: Qi Zheng <qi.zheng@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-12pinctrl: intel: Remove unneeded header includesJean Delvare
pinctrl-intel doesn't use anything from <linux/init.h>, <linux/acpi.h>, <linux/gpio.h> or <linux/pm.h>, so it should not include these header files. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: intel: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: cherryview: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: baytrail: use gpiochip data pointerLinus Walleij
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-26pinctrl: baytrail: Be sure to clamp return valueLinus Walleij
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-21Merge tag 'v4.4-rc6' into develLinus Walleij
Linux 4.4-rc6
2015-12-10pinctrl: intel: fix offset calculation issue of register PAD_OWNQipeng Zha
The calculation equation of PAD_OWN register offset is not correct for Broxton, verified this fix will get right offset for Broxton. Signed-off-by: Qi Zheng <qi.zheng@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-10pinctrl: intel: fix bug of register offset calculationQipeng Zha
The group size for registers PADCFGLOCK, HOSTSW_OWN, GPI_IS, GPI_IE, are not 24 for Broxton, Add a parameter to allow different platform to set correct value. Signed-off-by: Qi Zheng <qi.zheng@intel.com> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpio: change member .dev to .parentLinus Walleij
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-02Merge tag 'gpio-v4.4-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "Here is the bulk of GPIO changes for the v4.4 development cycle. The only changes hitting outside drivers/gpio are in the pin control subsystem and these seem to have settled nicely in linux-next. Development mistakes and catfights are nicely documented in the reverts as you can see. The outcome of the ABI fight is that we're working on a chardev ABI for GPIO now, where hope to show results for the v4.5 kernel. Summary of changes: GPIO core: - Define and handle flags for open drain/open collector and open source/open emitter, also know as "single-ended" configurations. - Generic request/free operations that handle calling out to the (optional) pin control backend. - Some refactoring related to an ABI change that did not happen, yet provide useful. - Added a real-time compliance checklist. Many GPIO chips have irqchips, and need to think this over with the RT patches going upstream. - Restructure, fix and clean up Kconfig menus a bit. New drivers: - New driver for AMD Promony. - New driver for ACCES 104-IDIO-16, a port-mapped I/O card, ISA-style. Very retro. Subdriver changes: - OMAP changes to handle real time requirements. - Handle trigger types for edge and level IRQs on PL061 properly. As this hardware is very common it needs to set a proper example for others to follow. - Some container_of() cleanups. - Delete the unused MSM driver in favor of the driver that is embedded inside the pin control driver. - Cleanup of the ath79 GPIO driver used by many, many OpenWRT router targets. - A consolidated IT87xx driver replacing the earlier very specific IT8761e driver. - Handle the TI TCA9539 in the PCA953x driver. Also handle ACPI devices in this subdriver. - Drop xilinx arch dependencies as these FPGAs seem to profilate over a few different architectures. MIPS and ARM come to mind" * tag 'gpio-v4.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (57 commits) gpio: fix up SPI submenu gpio: drop surplus I2C dependencies gpio: drop surplus X86 dependencies gpio: dt-bindings: document the official use of "ngpios" gpio: MAINTAINERS: Add an entry for the ATH79 GPIO driver gpio / ACPI: Allow shared GPIO event to be read via operation region gpio: group port-mapped I/O drivers in a menu gpio: Add ACCES 104-IDIO-16 driver maintainer entry gpio: zynq: Document interrupt-controller DT binding gpio: xilinx: Drop architecture dependencies gpio: generic: Revert to old error handling in bgpio_map gpio: add a real time compliance notes Revert "gpio: add a real time compliance checklist" gpio: Add GPIO support for the ACCES 104-IDIO-16 gpio: driver for AMD Promontory gpio: xlp: Convert to use gpiolib irqchip helpers gpio: add a real time compliance checklist gpio/xilinx: enable for MIPS gpiolib: Add and use OF_GPIO_SINGLE_ENDED flag gpiolib: Split GPIO flags parsing and GPIO configuration ...
2015-10-27pinctrl: intel: Add Intel Broxton pin controller supportMika Westerberg
This driver adds pinctrl/GPIO support for Intel Broxton. The GPIO controller is based on the same hardware design that is already used in Intel Sunrisepoint so we leverage the core driver here. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-27pinctrl: intel: Allow requesting pins which are in ACPI mode as GPIOsMika Westerberg
Reserved for ACPI actually means that in such case the GPIO hardware will not update the interrupt status register (GPI_IS) even if the pin is configured to trigger an interrupt. It will update GPI_GPE_STS instead and does not trigger an interrupt. Allow using such pins as GPIOs, only prevent their usage as interrupts. We also rename function intel_pad_reserved_for_acpi() to be intel_pad_acpi_mode() which reflects the actual meaning better. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-27pinctrl: intel: Add support for multiple GPIO chips sharing the interruptMika Westerberg
On Intel Broxton the GPIO hardware consists of several chips that all share the parent interrupt. It is not possible to handle this by setting chained handler for each chip (as they will overwrite each other). To overcome this we need to request the interrupt using devm_request_irq() and pass IRQF_SHARED with the flags. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16pinctrl: baytrail: Fix compilation warnings when !CONFIG_PMMika Westerberg
When CONFIG_PM is not set we get following compilation warnings: warning: ‘byt_gpio_runtime_suspend’ defined but not used [-Wunused-function] warning: ‘byt_gpio_runtime_resume’ defined but not used [-Wunused-function] Fix this by guarding byt_gpio_runtime_suspend()/byt_gpio_runtime_resume() with #ifdef CONFIG_PM. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16pinctrl: intel: Fix compilation warning when !CONFIG_PM_SLEEPMika Westerberg
We get following warning when CONFIG_PM_SLEEP is not set warning: ‘intel_gpio_irq_init’ defined but not used [-Wunused-function] Since the function is only called from intel_pinctrl_resume() move it inside CONFIG_PM_SLEEP guard as well. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16pinctrl: replace trivial implementations of gpio_chip request/freeJonas Gorski
Replace all trivial request/free callbacks that do nothing but call into pinctrl code with the generic versions. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Eric Anholt <eric@anholt.net> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Baruch Siach <baruch@tkos.co.il> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Lee Jones <lee@kernel.org> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-08-26pinctrl: cherryview: Use raw_spinlock for lockingMika Westerberg
When running -rt kernel and an interrupt happens on a GPIO line controlled by Intel Cherryview/Braswell pinctrl driver we get: BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/0 Preemption disabled at:[<ffffffff81092e9f>] cpu_startup_entry+0x17f/0x480 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.1.5-rt5 #16 ... Call Trace: <IRQ> [<ffffffff816283c6>] dump_stack+0x4a/0x61 [<ffffffff81077e17>] ___might_sleep+0xe7/0x170 [<ffffffff8162d6cf>] rt_spin_lock+0x1f/0x50 [<ffffffff812e52ed>] chv_gpio_irq_ack+0x3d/0xa0 [<ffffffff810a72f5>] handle_edge_irq+0x75/0x180 [<ffffffff810a3457>] generic_handle_irq+0x27/0x40 [<ffffffff812e57de>] chv_gpio_irq_handler+0x7e/0x110 [<ffffffff810050aa>] handle_irq+0xaa/0x190 ... This is because desc->lock is raw_spinlock and is held when chv_gpio_irq_ack() is called by the genirq core. chv_gpio_irq_ack() in turn takes pctrl->lock which in -rt is an rt-mutex causing might_sleep() rightfully to complain about sleeping function called from invalid context. In order to keep -rt happy but at the same time make sure that register accesses get serialized, convert the driver to use raw_spinlock instead. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-26pinctrl: baytrail: Use raw_spinlock for lockingMika Westerberg
The Intel Baytrail pinctrl driver implements irqchip callbacks which are called with desc->lock raw_spinlock held. In mainline this is fine because spinlock resolves to raw_spinlock. However, running the same code in -rt we get: BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/0 Preemption disabled at:[<ffffffff81092e9f>] cpu_startup_entry+0x17f/0x480 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.1.5-rt5 #13 ... Call Trace: <IRQ> [<ffffffff816283c6>] dump_stack+0x4a/0x61 [<ffffffff81077e17>] ___might_sleep+0xe7/0x170 [<ffffffff8162d6cf>] rt_spin_lock+0x1f/0x50 [<ffffffff812e3b88>] byt_gpio_clear_triggering+0x38/0x60 [<ffffffff812e3bc1>] byt_irq_mask+0x11/0x20 [<ffffffff810a7013>] handle_level_irq+0x83/0x150 [<ffffffff810a3457>] generic_handle_irq+0x27/0x40 [<ffffffff812e3a5f>] byt_gpio_irq_handler+0x7f/0xc0 [<ffffffff810050aa>] handle_irq+0xaa/0x190 ... This is because in -rt spinlocks are preemptible so taking the driver private spinlock in irqchip callbacks causes might_sleep() to trigger. In order to keep -rt happy but at the same time make sure that register accesses get serialized, convert the driver to use raw_spinlock instead. Also shorten the critical section a bit in few places. Suggested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-13pinctrl: baytrail: Serialize all register accessMika Westerberg
There is a hardware issue in Intel Baytrail where concurrent GPIO register access might result reads of 0xffffffff and writes might get dropped completely. Prevent this from happening by taking the serializing lock in all places where it is possible that more than one thread might be accessing the hardware concurrently. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-13pinctrl: baytrail: Drop FSF mailing addressMika Westerberg
The FSF address is already mentioned in the COPYING file. No need to duplicate that information to individual files. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-13pinctrl: cherryview: Serialize all register accessMika Westerberg
There is a hardware issue in Intel Braswell/Cherryview where concurrent GPIO register access might results reads of 0xffffffff and writes might get dropped. Prevent this from happening by taking the serializing lock for all places where it is possible that more than one thread might be accessing the hardware concurrently. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-17pinctrl: Use irq_desc_get_xxx() to avoid redundant lookup of irq_descJiang Liu
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we already have a pointer to corresponding irq_desc. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-17pinctrl/intel: Use irq_set_handler_locked()Thomas Gleixner
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org
2015-07-17pinctrl/cherryview: Use irq_set_handler_locked()Thomas Gleixner
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org
2015-07-17pinctrl/baytrail: Use irq_set_handler_locked()Thomas Gleixner
Use irq_set_handler_locked() as it avoids a redundant lookup of the irq descriptor. Search and replacement was done with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 11:15:24 +0000