summaryrefslogtreecommitdiff
path: root/drivers/pinctrl/intel/pinctrl-merrifield.c
AgeCommit message (Collapse)Author
2019-07-23pinctrl: merrifield: Use devm_platform_ioremap_resource()Andy Shevchenko
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2018-11-08pinctrl: merrifield: include bits.h instead of bitops.hAndy Shevchenko
The reason of including <linux/bitops.h> here is just for BIT() and Co macros. Since commit 8bd9cb51daac8 ("... Move some macros from <linux/bitops.h> to a new <linux/bits.h> file"), <linux/bits.h> is enough for such compile-time macros. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2018-09-25pinctrl: intel: merrifield: Group IO accessors in codeAndy Shevchenko
Consolidate IO accessors in the code to make maintenance a little bit easier in the future. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-25pinctrl: intel: merrifield: Introduce mrfld_read_bufcfg()Andy Shevchenko
mrfld_read_bufcfg() helper checks if pin is correct and reads back the current value of corresponding BUFCFG register. While it adds lines of code it will be easier to maintain in the future. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-18Merge tag 'char-misc-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the bit set of char/misc drivers for 4.19-rc1 There is a lot here, much more than normal, seems like everyone is writing new driver subsystems these days... Anyway, major things here are: - new FSI driver subsystem, yet-another-powerpc low-level hardware bus - gnss, finally an in-kernel GPS subsystem to try to tame all of the crazy out-of-tree drivers that have been floating around for years, combined with some really hacky userspace implementations. This is only for GNSS receivers, but you have to start somewhere, and this is great to see. Other than that, there are new slimbus drivers, new coresight drivers, new fpga drivers, and loads of DT bindings for all of these and existing drivers. All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits) android: binder: Rate-limit debug and userspace triggered err msgs fsi: sbefifo: Bump max command length fsi: scom: Fix NULL dereference misc: mic: SCIF Fix scif_get_new_port() error handling misc: cxl: changed asterisk position genwqe: card_base: Use true and false for boolean values misc: eeprom: assignment outside the if statement uio: potential double frees if __uio_register_device() fails eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency misc: ti-st: Fix memory leak in the error path of probe() android: binder: Show extra_buffers_size in trace firmware: vpd: Fix section enabled flag on vpd_section_destroy platform: goldfish: Retire pdev_bus goldfish: Use dedicated macros instead of manual bit shifting goldfish: Add missing includes to goldfish.h mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux dt-bindings: mux: add adi,adgs1408 Drivers: hv: vmbus: Cleanup synic memory free path Drivers: hv: vmbus: Remove use of slow_virt_to_phys() Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind() ...
2018-07-07headers: separate linux/mod_devicetable.h from linux/platform_device.hRandy Dunlap
At over 4000 #includes, <linux/platform_device.h> is the 9th most #included header file in the Linux kernel. It does not need <linux/mod_devicetable.h>, so drop that header and explicitly add <linux/mod_devicetable.h> to source files that need it. 4146 #include <linux/platform_device.h> After this patch, there are 225 files that use <linux/mod_devicetable.h>, for a reduction of around 3900 times that <linux/mod_devicetable.h> does not have to be read & parsed. 225 #include <linux/mod_devicetable.h> This patch was build-tested on 20 different arch-es. It also makes these drivers SubmitChecklist#1 compliant. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> # drivers/media/platform/vimc/ Reported-by: kbuild test robot <lkp@intel.com> # drivers/pinctrl/pinctrl-u300.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-02pinctrl: intel: Convert to use SPDX identifierAndy Shevchenko
Reduce size of duplicated comments by switching to use SPDX identifier. No functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-29pinctrl: intel: merrifield: Introduce ACPI device tableAndy Shevchenko
On Intel Merrifield the pin control device is a separate IP block without any PCI ID assigned. Though, recently we got an allocated ACPI ID for it, so, let's use fresh ID. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-07pinctrl: intel: merrifield: Correct UART pin listsAndy Shevchenko
UART pin lists consist GPIO numbers which is simply wrong. Replace it by pin numbers. Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-30pinctrl: intel: merrifield: Add missed check in mrfld_config_set()Andy Shevchenko
Not every pin can be configured. Add missed check to prevent access violation. Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-29pinctrl: intel: merrifield: Add pin config group handlersAndy Shevchenko
Pin config get() and set() handlers for pin groups were previously not implemented by this driver. The pin_config_group_set() is particularly useful for applying a common config setting to all pins in a specified group with a single call, without the caller needing to reference each individual pin by name. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-12pinctrl: intel: merrifield: fix dup size in probeVincent Stehlé
In function mrfld_pinctrl_probe(), when duplicating the mrfld_families array the requested memory region length is multiplied once too many by the number of elements in the original array. Fix this to spare some memory. Fixes: 4e80c8f505741cbd ("pinctrl: intel: Add Intel Merrifield pin controller support") Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-10pinctrl: intel: merrifield: Add missed headerAndy Shevchenko
On x86 builds the absense of <linux/io.h> makes static analyzer and compiler unhappy which fails to build the driver. CHECK drivers/pinctrl/intel/pinctrl-merrifield.c drivers/pinctrl/intel/pinctrl-merrifield.c:518:17: error: undefined identifier 'readl' drivers/pinctrl/intel/pinctrl-merrifield.c:570:17: error: undefined identifier 'readl' drivers/pinctrl/intel/pinctrl-merrifield.c:575:9: error: undefined identifier 'writel' drivers/pinctrl/intel/pinctrl-merrifield.c:645:17: error: undefined identifier 'readl' CC drivers/pinctrl/intel/pinctrl-merrifield.o drivers/pinctrl/intel/pinctrl-merrifield.c: In function ‘mrfld_pin_dbg_show’: drivers/pinctrl/intel/pinctrl-merrifield.c:518:10: error: implicit declaration of function ‘readl’ [-Werror=implicit-function-declaration] value = readl(bufcfg); ^ drivers/pinctrl/intel/pinctrl-merrifield.c: In function ‘mrfld_update_bufcfg’: drivers/pinctrl/intel/pinctrl-merrifield.c:575:2: error: implicit declaration of function ‘writel’ [-Werror=implicit-function-declaration] writel(value, bufcfg); ^ cc1: some warnings being treated as errors Add header to the top of the module. Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-29pinctrl: intel: Add Intel Merrifield pin controller supportAndy Shevchenko
This driver adds pinctrl support for Intel Merrifield. The IP block which is called Family-Level Interface Shim is a separate entity in SoC. The GPIO driver (gpio-intel-mid.c) will be updated accordingly to support pinctrl interface. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>