summaryrefslogtreecommitdiff
path: root/drivers/phy
AgeCommit message (Collapse)Author
2015-05-12phy: phy-rcar-gen2: Fix USBHS_UGSTS_LOCK valueYoshihiro Shimoda
According to the technical update (No. TN-RCS-B011A/E), the UGSTS LOCK bit location is bit 8, not bits 1 and 0. It also says that the register address offset of UGSTS is 0x88, not 0x90. So, this patch fixes the USBHS_UGSTS_LOCK value and some comments. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-05-12phy: omap-usb2: invoke pm_runtime_disable on error pathKishon Vijay Abraham I
if devm_clk_get for wkupclk fails, there will be an unbalanced pm_runtime_enable. Fix it here. Reported-by: Benoit Parrot <bparrot@ti.com> Cc: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-05-12phy: fix Kconfig dependenciesFelipe Balbi
DM816x PHY uses usb_phy_* methods and because of that, it must select USB_PHY, however, because the drivers in question (DM816x, TWL4030 and OMAP_USB2) sit outside of drivers/usb/ directory, meaning they can be built even if USB_SUPPORT=n. This patches fixes the dependencies by adding USB_SUPPORT as a dependency and making all drivers select USB_PHY (which cannot be selected through menuconfig). Note that this fixes some linking breakages when building with randconfig. Cc: Tony Lindgren <tony@atomide.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-05-12phy: qcom-ufs: Switch dependency to ARCH_QCOMStephen Boyd
This phy only exists on platforms under ARCH_QCOM, not ARCH_MSM. Cc: Yaniv Gardi <ygardi@codeaurora.org> Cc: Dov Levenglick <dovl@codeaurora.org> Cc: Christoph Hellwig <hch@lst.de> Cc: David Brown <davidb@codeaurora.org> Cc: Bryan Huntsman <bryanh@codeaurora.org> Cc: Daniel Walker <dwalker@fifo99.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-05-11phy: core: Fix error checking in (devm_)phy_optional_getAxel Lin
Don't pass valid pointer to PTR_ERR, use PTR_ERR(phy) only when IS_ERR(phy) is true. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-04-13Merge tag 'usb-4.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver updates from Greg KH: "Here's the big USB (and PHY) driver patchset for 4.1-rc1. Everything here has been in linux-next, and the full details are below in the shortlog. Nothing major, just the normal round of new drivers,api updates, and other changes, mostly in the USB gadget area, as usual" * tag 'usb-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (252 commits) drivers/usb/core: devio.c: Removed an uneeded space before tab usb: dwc2: host: sleep USB_RESUME_TIMEOUT during resume usb: chipidea: debug: add low power mode check before print registers usb: chipidea: udc: bypass pullup DP when gadget connect in OTG fsm mode usb: core: hub: use new USB_RESUME_TIMEOUT usb: isp1760: hcd: use new USB_RESUME_TIMEOUT usb: dwc2: hcd: use new USB_RESUME_TIMEOUT usb: host: sl811: use new USB_RESUME_TIMEOUT usb: host: r8a66597: use new USB_RESUME_TIMEOUT usb: host: oxu210hp: use new USB_RESUME_TIMEOUT usb: host: fusbh200: use new USB_RESUME_TIMEOUT usb: host: fotg210: use new USB_RESUME_TIMEOUT usb: host: isp116x: use new USB_RESUME_TIMEOUT usb: musb: use new USB_RESUME_TIMEOUT usb: host: uhci: use new USB_RESUME_TIMEOUT usb: host: ehci: use new USB_RESUME_TIMEOUT usb: host: xhci: use new USB_RESUME_TIMEOUT usb: define a generic USB_RESUME_TIMEOUT macro usb: musb: dsps: fix build on i386 when COMPILE_TEST is set ehci-hub: use USB_DT_HUB ...
2015-04-10Merge remote-tracking branches 'regulator/topic/mode', ↵Mark Brown
'regulator/topic/notifier', 'regulator/topic/palmas', 'regulator/topic/qcom' and 'regulator/topic/stw481x' into regulator-next
2015-04-10Merge tag 'for-4.1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next Kishon writes: New Features ============ *) Add driver for USB PHYs on sun9i *) Add driver for USB PHY on dm816x *) Modified exynos5-usbdrd driver to add support for Exynos5433 SoC Fixes ===== *) Fix power_on/power_off failure paths in some drivers *) Make miphy365x use generic PHY type constants *) Fix build errors due to missing export symbols in qcom-ufs driver *) Make all the functions return proper error values Cleanups ======== *) use PTR_ERR_OR_ZERO to simplify code *) use devm_kcalloc instead of devm_kzalloc with multiply *) remove un-necessary ifdef CONFIG_OF
2015-04-03phy: spear1340-miphy: Return proper error for spear1340_miphy_xlateAxel Lin
The of_xlate callback should return ERR_PTR on error. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-04-03phy: spear1310-miphy: Return proper error for spear1310_miphy_xlateAxel Lin
The of_xlate callback should return ERR_PTR on error. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-04-03phy: miphy365x: Use the generic phy type constants in dt-bindings/phy/phy.hPeter Griffin
Now there are generic phy type constants declared in phy.h, migrate over to using them rather than defining our own. This change has been done as one atomic commit to be bisectable. Note: The values of the defines are the same, so there is no ABI breakage with this patch. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-04-03phy: Add driver to support individual USB PHYs on sun9iChen-Yu Tsai
Unlike previous Allwinner SoCs, there is no central PHY control block on the A80. Also, OTG support is completely split off into a different controller. This adds a new driver to support the regular USB PHYs. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-04-03phy: Add a driver for dm816x USB PHYTony Lindgren
Add a minimal driver for dm816x USB. This makes USB work on dm816x without any other changes needed as it can use the existing musb_dsps glue layer for the USB controller. Note that this phy is different from dm814x and am335x. Cc: Bin Liu <binmlist@gmail.com> Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-04-03phy: qcom-ufs: Don't return error if fail to get optional resourceAxel Lin
"dev_ref_clk_ctrl_mem" is optional resource, so don't return error if fail to get the resource. Since it's an optional resource, don't emit error if fail to get dev_ref_clk_ctrl_mem. Also remove redundant test for res, it's done by devm_ioremap_resource(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-04-03phy: qcom-ufs: Fix build error due to missing export symbolsAxel Lin
Fix below build error when compile the driver as a module. ERROR: "ufs_qcom_phy_power_off" [drivers/phy/phy-qcom-ufs-qmp-20nm.ko] undefined! ERROR: "ufs_qcom_phy_power_on" [drivers/phy/phy-qcom-ufs-qmp-20nm.ko] undefined! ERROR: "ufs_qcom_phy_exit" [drivers/phy/phy-qcom-ufs-qmp-20nm.ko] undefined! ERROR: "ufs_qcom_phy_calibrate" [drivers/phy/phy-qcom-ufs-qmp-20nm.ko] undefined! ERROR: "ufs_qcom_phy_generic_probe" [drivers/phy/phy-qcom-ufs-qmp-20nm.ko] undefined! ERROR: "ufs_qcom_phy_init_vregulators" [drivers/phy/phy-qcom-ufs-qmp-20nm.ko] undefined! ERROR: "ufs_qcom_phy_init_clks" [drivers/phy/phy-qcom-ufs-qmp-20nm.ko] undefined! ERROR: "ufs_qcom_phy_remove" [drivers/phy/phy-qcom-ufs-qmp-20nm.ko] undefined! ERROR: "get_ufs_qcom_phy" [drivers/phy/phy-qcom-ufs-qmp-20nm.ko] undefined! ERROR: "ufs_qcom_phy_power_off" [drivers/phy/phy-qcom-ufs-qmp-14nm.ko] undefined! ERROR: "ufs_qcom_phy_power_on" [drivers/phy/phy-qcom-ufs-qmp-14nm.ko] undefined! ERROR: "ufs_qcom_phy_exit" [drivers/phy/phy-qcom-ufs-qmp-14nm.ko] undefined! ERROR: "ufs_qcom_phy_generic_probe" [drivers/phy/phy-qcom-ufs-qmp-14nm.ko] undefined! ERROR: "ufs_qcom_phy_init_vregulators" [drivers/phy/phy-qcom-ufs-qmp-14nm.ko] undefined! ERROR: "ufs_qcom_phy_init_clks" [drivers/phy/phy-qcom-ufs-qmp-14nm.ko] undefined! ERROR: "ufs_qcom_phy_calibrate" [drivers/phy/phy-qcom-ufs-qmp-14nm.ko] undefined! ERROR: "ufs_qcom_phy_remove" [drivers/phy/phy-qcom-ufs-qmp-14nm.ko] undefined! ERROR: "get_ufs_qcom_phy" [drivers/phy/phy-qcom-ufs-qmp-14nm.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-26phy: samsung_usb2: Fixup samsung_usb2_phy_power_on/off pathsAxel Lin
Ensure we have balanced clk_prepare_enable/clk_disable_unprepare calls if .power_on or .power_off callbacks return error. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-26phy: exynos5-usbdrd: Add to support for Exynos5433 SoCJaewon Kim
This patch adds driver data to support for Exynos5433 SoC. The Exynos5433 has one USB3.0 Host and USB3.0 DRD(Dual Role Device). Exynos5433 is simplar to Eyxnos7 but Exynos5433 have one more USB3.0 Host controller. Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-26phy: qcom-ufs: Catch devm_phy_create failure in ufs_qcom_phy_generic_probeAxel Lin
Current code does NULL test against return value of ufs_qcom_phy_generic_probe. However, in the case of devm_phy_create() failure, ufs_qcom_phy_generic_probe does not return NULL. Fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-26phy: stih41x-usb: Fixup stih41x_usb_phy_power_on failure pathAxel Lin
If stih41x_usb_phy_power_on() fails, we need to call clk_disable_unprepare() before return error. This is to ensure we have balanced clk_enable/disable calls. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-13phy: omap-usb2: Fix missing clk_prepare call when using old dt nameAxel Lin
Current code does not call clk_prepare(phy->optclk) when using the old usb_otg_ss_refclk960m name. Fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-13phy: ti/omap: Fix modaliasAxel Lin
Remove extra space in MODULE_ALIAS. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-13phy: core: Fixup return value of phy_exit when !pm_runtime_enabledAxel Lin
When phy_pm_runtime_get_sync() returns -ENOTSUPP, phy_exit() also returns -ENOTSUPP if !phy->ops->exit. Fix it. Also move the code to override ret close to the code we got ret. I think it is less error prone this way. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-13phy: miphy28lp: Convert to devm_kcalloc and fix wrong sizofAxel Lin
Prefer devm_kcalloc over devm_kzalloc with multiply. In additional, use sizeof(phy) is incorrect, fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Gabriel Fernandez<gabriel.fernandez@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-13phy: miphy365x: Convert to devm_kcalloc and fix wrong sizeofAxel Lin
Prefer devm_kcalloc over devm_kzalloc with multiply. In additional, use sizeof(phy) is incorrect, fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-13phy: twl4030-usb: Remove redundant assignment for twl->linkstatAxel Lin
It's pointless to set twl->linkstat twice. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-13phy: exynos5-usbdrd: Fix off-by-one valid value checking for args->args[0]Axel Lin
Current code uses args->args[0] as array subscript of phy_drd->phys[]. So the valid value range for args->args[0] is 0 ... EXYNOS5_DRDPHYS_NUM - 1. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-13phy: Find the right match in devm_phy_destroy()Thierry Reding
devm_phy_create() stores the pointer to the new PHY at the address returned by devres_alloc(). The res parameter passed to devm_phy_match() is therefore the location where the pointer to the PHY is stored, hence it needs to be dereferenced before comparing to the match data in order to find the correct match. Cc: <stable@vger.kernel.org> # v3.13+ Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-12phy: rockchip-usb: Fixup rockchip_usb_phy_power_on failure pathAxel Lin
If rockchip_usb_phy_power() fails, we need to call clk_disable_unprepare() before return. This is to ensure we have balanced clk_enable/disable calls. Also remove unneeded ret checking in rockchip_usb_phy_power_off. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-12phy: ti-pipe3: Simplify ti_pipe3_dpll_wait_lock implementationAxel Lin
Code simplification. No functional change. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-12phy: samsung-usb2: Remove NULL terminating entry from phys arrayAxel Lin
Current code uses num_phys settings to tell the number of entries in phys. Thus remove the NULL terminating entry from phys array which is not necessary. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-12phy: hix5hd2-sata: Check return value of platform_get_resourceAxel Lin
This prevent NULL pointer dereference if res is NULL. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-12phy: exynos-dp-video: Kill exynos_dp_video_phy_pwr_isol functionAxel Lin
If IS_ERR(state->regs) the .probe fails. So IS_ERR(state->regs) test in exynos_dp_video_phy_pwr_isol() is not necessary. exynos_dp_video_phy_pwr_isol() simply does a regmap_update_bits() call now, just call regmap_update_bits() instead and return proper return value. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-11phy: exynos-mipi-video: Use spin_lock to protct state->regmap rmw operationsAxel Lin
The state->regmap is initialized by devm_regmap_init_mmio(). So it's fine to use spin_lock rather than mutex to protct state->regmap rmw operations. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com> [Julia.Lawall@lip6.fr: Found an issue with the original patch w.r.t unbalanced spin_lock call] Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10phy: berlin-usb: Set drvdata for phy and use itAxel Lin
At the context where we have pointer to struct phy, it's useful to call phy_get_drvdata() to get the address of priv. With this change, we can remove the to_phy_berlin_usb_priv() macro and remove *phy from struct phy_berlin_usb_priv. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10regulator: fixes for regulator_set_optimum_mode name changeStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-10phy: ti-pipe3: Remove unneeded ifdef CONFIG_OF guard and of_match_ptrAxel Lin
if !CONFIG_OF, the probe fails. This is a dt-only driver, so the ifdef CONFIG_OF guard and of_match_ptr are not needed. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10phy: omap-usb2: Remove unneeded ifdef CONFIG_OF guard and of_match_ptrAxel Lin
if !CONFIG_OF, the probe fails. This is a dt-only driver, so the ifdef CONFIG_OF guard and of_match_ptr are not needed. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10phy: omap-control: Remove unneeded ifdef CONFIG_OF guard and of_match_ptrAxel Lin
if !CONFIG_OF, the probe fails. This is a dt-only driver, so the ifdef CONFIG_OF guard and of_match_ptr are not needed. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10phy: miphy28lp: Use PTR_ERR_OR_ZEROAxel Lin
PTR_ERR_OR_ZERO simplifies the code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Gabriel Fernandez<gabriel.fernandez@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10phy: berlin-sata: Use devm_kcalloc at appropriate placeAxel Lin
Prefer devm_kcalloc over devm_kzalloc with multiply. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10phy: xgene: Use PTR_ERR_OR_ZEROAxel Lin
Also remove unneeded goto and rc variable. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-10phy: berlin-usb: Use PTR_ERR_OR_ZEROAxel Lin
PTR_ERR_OR_ZERO simplifies the code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-04phy: exynos-mipi-video: Fixup the test for state->regmapAxel Lin
syscon_regmap_lookup_by_phandle() returns ERR_PTR on error. Thus don't use null test against state->regmap. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-04phy: miphy28lp: Add missing .owner field in miphy28lp_opsAxel Lin
Add missing .owner field in miphy28lp_ops, which is used for refcounting. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-04phy: xgene: Remove duplicate code to set ctx->devAxel Lin
Set it once is enough and it's done after devm_kzalloc(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-04phy: armada375-usb2: Set drvdata for phy and use itAxel Lin
At the context we have pointer to struct phy, it's useful to call phy_get_drvdata() to get the address of cluster_phy. This has slightly better readability than calling dev_get_drvdata(phy->dev.parent). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-04phy: miphy365x: Avoid calling of_get_child_count() multiple timesAxel Lin
Currently, of_get_child_count() is called in each iteration of the for loop in miphy365x_xlate(). This patch stores the return value of of_get_child_count() in miphy_dev->nphys and call of_get_child_count() once in miphy365x_probe(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-03-04phy: miphy28lp: Avoid calling of_get_child_count() multiple timesAxel Lin
Currently, of_get_child_count() is called in each iteration of the for loop in miphy28lp_xlate(). This patch stores the return value of of_get_child_count() in miphy_dev->nphys and call of_get_child_count() once in miphy28lp_probe(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2015-02-15Merge tag 'usb-3.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg KH: "Here's the big pull request for the USB driver tree for 3.20-rc1. Nothing major happening here, just lots of gadget driver updates, new device ids, and a bunch of cleanups. All of these have been in linux-next for a while with no reported issues" * tag 'usb-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (299 commits) usb: musb: fix device hotplug behind hub usb: dwc2: Fix a bug in reading the endpoint directions from reg. staging: emxx_udc: fix the build error usb: Retry port status check on resume to work around RH bugs Revert "usb: Reset USB-3 devices on USB-3 link bounce" uhci-hub: use HUB_CHAR_* usb: kconfig: replace PPC_OF with PPC ehci-pci: disable for Intel MID platforms (update) usb: gadget: Kconfig: use bool instead of boolean usb: musb: blackfin: remove incorrect __exit_p() USB: fix use-after-free bug in usb_hcd_unlink_urb() ehci-pci: disable for Intel MID platforms usb: host: pci_quirks: joing string literals USB: add flag for HCDs that can't receive wakeup requests (isp1760-hcd) USB: usbfs: allow URBs to be reaped after disconnection cdc-acm: kill unnecessary messages cdc-acm: add sanity checks usb: phy: phy-generic: Fix USB PHY gpio reset usb: dwc2: fix USB core dependencies usb: renesas_usbhs: fix NULL pointer dereference in dma_release_channel() ...
2015-02-11Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "This is the usual grab bag of driver updates (hpsa, storvsc, mp2sas, megaraid_sas, ses) plus an assortment of minor updates. There's also an update to ufs which adds new phy drivers and finally a new logging infrastructure for SCSI" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (114 commits) scsi_logging: return void for dev_printk() functions scsi: print single-character strings with seq_putc scsi: merge consecutive seq_puts calls scsi: replace seq_printf with seq_puts aha152x: replace seq_printf with seq_puts advansys: replace seq_printf with seq_puts scsi: remove SPRINTF macro sg: remove an unused variable hpsa: Use local workqueues instead of system workqueues hpsa: add in P840ar controller model name hpsa: add in gen9 controller model names hpsa: detect and report failures changing controller transport modes hpsa: shorten the wait for the CISS doorbell mode change ack hpsa: refactor duplicated scan completion code into a new routine hpsa: move SG descriptor set-up out of hpsa_scatter_gather() hpsa: do not use function pointers in fast path command submission hpsa: print CDBs instead of kernel virtual addresses for uncommon errors hpsa: do not use a void pointer for scsi_cmd field of struct CommandList hpsa: return failed from device reset/abort handlers hpsa: check for ctlr lockup after command allocation in main io path ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 12:51:29 +0000