summaryrefslogtreecommitdiff
path: root/drivers/phy/renesas
AgeCommit message (Collapse)Author
2020-12-05phy: renesas: rcar-gen3-usb2: disable runtime pm in case of failureWang Li
pm_runtime_enable() will decrease power disable depth. Thus a pairing increment is needed on the error handling path to keep it balanced. Fixes: 5d8042e95fd4 ("phy: rcar-gen3-usb2: Add support for r8a77470") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Li <wangli74@huawei.com> Link: https://lore.kernel.org/r/20201126024412.4046845-1-wangli74@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-11-16phy: renesas: convert to devm_platform_ioremap_resourceChunfeng Yun
Use devm_platform_ioremap_resource to simplify code Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1604642930-29019-12-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-20phy: renesas: rcar-gen3-usb2: exit if request_irq() failedYoshihiro Shimoda
To avoid unexpected behaviors, it's better to exit if request_irq() failed. Suggested-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1594986297-12434-3-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-20phy: renesas: rcar-gen3-usb2: move irq registration to initYoshihiro Shimoda
If CONFIG_DEBUG_SHIRQ was enabled, r8a77951-salvator-xs could boot correctly. If we appended "earlycon keep_bootcon" to the kernel command like, we could get kernel log like below. SError Interrupt on CPU0, code 0xbf000002 -- SError CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3-salvator-x-00505-g6c843129e6faaf01 #785 Hardware name: Renesas Salvator-X 2nd version board based on r8a77951 (DT) pstate: 60400085 (nZCv daIf +PAN -UAO BTYPE=--) pc : rcar_gen3_phy_usb2_irq+0x14/0x54 lr : free_irq+0xf4/0x27c This means free_irq() calls the interrupt handler while PM runtime is not getting if DEBUG_SHIRQ is enabled and rcar_gen3_phy_usb2_probe() failed. To fix the issue, move the irq registration place to rcar_gen3_phy_usb2_init() which is ready to handle the interrupts. Note that after the commit 549b6b55b005 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs") which is merged into v5.2, since this driver creates multiple phy instances, needs to check whether one of phy instances is initialized. However, if we backport this patch to v5.1 or less, we don't need to check it because such kernel have single phy instance. Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 9f391c574efc ("phy: rcar-gen3-usb2: add runtime ID/VBUS pin detection") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1594986297-12434-2-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-10-31phy: renesas: phy-rcar-gen2: Fix the array off by one warningBiju Das
Fix the below smatch warning by adding variable check rather than the hardcoded value. warn: array off by one? 'data->select_value[channel_num]' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23phy: renesas: rcar-gen3-usb2: Fix sysfs interface of "role"Yoshihiro Shimoda
Since the role_store() uses strncmp(), it's possible to refer out-of-memory if the sysfs data size is smaller than strlen("host"). This patch fixes it by using sysfs_streq() instead of strncmp(). Reported-by: Pavel Machek <pavel@denx.de> Fixes: 9bb86777fb71 ("phy: rcar-gen3-usb2: add sysfs for usb role swap") Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Pavel Machek <pavel@denx.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-10-23phy: renesas: rcar-gen3-usb2: Use platform_get_irq_optional() for optional irqGeert Uytterhoeven
As platform_get_irq() now prints an error when the interrupt does not exist, a scary warning may be printed for an optional interrupt: phy_rcar_gen3_usb2 ee0a0200.usb-phy: IRQ index 0 not found Fix this by calling platform_get_irq_optional() instead. Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-08-26phy: renesas: rcar-gen3-usb2: Disable clearing VBUS in over-currentYoshihiro Shimoda
The hardware manual should be revised, but the initial value of VBCTRL.OCCLREN is set to 1 actually. If the bit is set, the hardware clears VBCTRL.VBOUT and ADPCTRL.DRVVBUS registers automatically when the hardware detects over-current signal from a USB power switch. However, since the hardware doesn't have any registers which indicates over-current, the driver cannot handle it at all. So, if "is_otg_channel" hardware detects over-current, since ADPCTRL.DRVVBUS register is cleared automatically, the channel cannot be used after that. To resolve this behavior, this patch sets the VBCTRL.OCCLREN to 0 to keep ADPCTRL.DRVVBUS even if the "is_otg_channel" hardware detects over-current. (We assume a USB power switch itself protects over-current and turns the VBUS off.) This patch is inspired by a BSP patch from Kazuya Mizuguchi. Fixes: 1114e2d31731 ("phy: rcar-gen3-usb2: change the mode to OTG on the combined channel") Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-07-01Merge tag 'phy-for-5.3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next phy: for 5.3 *) Add a new PHY driver for Qualcomm PCIe2 PHY *) Add a new PHY driver for Mixel DPHY present in i.MX8 *) Fix Qualcomm QMP UFS PHY driver from incorrectly reporting that PHY enable failed *) Fix _BUG_ on Amlogic G12A USB3 + PCIE Combo PHY Driver due to calling a sleeping function from invalid context *) Fix WARN_ON dump on rcar-gen3-usb2 PHY driver caused due to imbalance powered flag *) Fix .cocci and sparse warnings Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: phy: qcom-qmp: Raise qcom_qmp_phy_enable() polling delay phy: meson-g12a-usb3-pcie: disable locking for cr_regmap phy: Add driver for mixel mipi dphy found on NXP's i.MX8 SoCs dt-bindings: phy: Add documentation for mixel dphy dt-bindings: phy-pxa-usb: add bindings phy: renesas: rcar-gen3-usb2: fix imbalance powered flag phy: qcom-qmp: Drop useless msm8998_pciephy_cfg setting phy: qcom-qmp: Correct READY_STATUS poll break condition phy: ti: am654-serdes: Make serdes_am654_xlate() static phy: usb: phy-brcm-usb: Fix platform_no_drv_owner.cocci warnings phy: samsung: Use struct_size() in devm_kzalloc() phy: qcom: Add Qualcomm PCIe2 PHY driver dt-bindings: phy: Add binding for Qualcomm PCIe2 PHY
2019-06-21phy: renesas: rcar-gen3-usb2: fix imbalance powered flagYoshihiro Shimoda
The powered flag should be set for any other phys anyway. Also the flag should be locked by the channel. Otherwise, after we have revised the device tree for the usb phy, the following warning happened during a second system suspend. And if the driver doesn't lock the flag, an imbalance is possible when enabling the regulator during system resume. So, this patch fixes the issues. < The warning > [ 56.026531] unbalanced disables for USB20_VBUS0 [ 56.031108] WARNING: CPU: 3 PID: 513 at drivers/regulator/core.c:2593 _regula tor_disable+0xe0/0x1c0 [ 56.040146] Modules linked in: rcar_du_drm rcar_lvds drm_kms_helper drm drm_p anel_orientation_quirks vsp1 videobuf2_vmalloc videobuf2_dma_contig videobuf2_me mops videobuf2_v4l2 videobuf2_common videodev snd_soc_rcar renesas_usbhs snd_soc _audio_graph_card media snd_soc_simple_card_utils crct10dif_ce renesas_usb3 snd_ soc_ak4613 rcar_fcp pwm_rcar usb_dmac phy_rcar_gen3_usb3 pwm_bl ipv6 [ 56.074047] CPU: 3 PID: 513 Comm: kworker/u16:19 Not tainted 5.2.0-rc3-00001- g5f20a19 #6 [ 56.082129] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ ( DT) [ 56.089524] Workqueue: events_unbound async_run_entry_fn [ 56.094832] pstate: 40000005 (nZcv daif -PAN -UAO) [ 56.099617] pc : _regulator_disable+0xe0/0x1c0 [ 56.104054] lr : _regulator_disable+0xe0/0x1c0 [ 56.108489] sp : ffff0000121c3ae0 [ 56.111796] x29: ffff0000121c3ae0 x28: 0000000000000000 [ 56.117102] x27: 0000000000000000 x26: ffff000010fe0e60 [ 56.122407] x25: 0000000000000002 x24: 0000000000000001 [ 56.127712] x23: 0000000000000002 x22: ffff8006f99d4000 [ 56.133017] x21: ffff8006f99cc000 x20: ffff8006f9846800 [ 56.138322] x19: ffff8006f9846800 x18: ffffffffffffffff [ 56.143626] x17: 0000000000000000 x16: 0000000000000000 [ 56.148931] x15: ffff0000112f96c8 x14: ffff0000921c37f7 [ 56.154235] x13: ffff0000121c3805 x12: ffff000011312000 [ 56.159540] x11: 0000000005f5e0ff x10: ffff0000112f9f20 [ 56.164844] x9 : ffff0000112d3018 x8 : 00000000000001ad [ 56.170149] x7 : 00000000ffffffcc x6 : ffff8006ff768180 [ 56.175453] x5 : ffff8006ff768180 x4 : 0000000000000000 [ 56.180758] x3 : ffff8006ff76ef10 x2 : ffff8006ff768180 [ 56.186062] x1 : 3d2eccbaead8fb00 x0 : 0000000000000000 [ 56.191367] Call trace: [ 56.193808] _regulator_disable+0xe0/0x1c0 [ 56.197899] regulator_disable+0x40/0x78 [ 56.201820] rcar_gen3_phy_usb2_power_off+0x3c/0x50 [ 56.206692] phy_power_off+0x48/0xd8 [ 56.210263] usb_phy_roothub_power_off+0x30/0x50 [ 56.214873] usb_phy_roothub_suspend+0x1c/0x50 [ 56.219311] hcd_bus_suspend+0x13c/0x168 [ 56.223226] generic_suspend+0x4c/0x58 [ 56.226969] usb_suspend_both+0x1ac/0x238 [ 56.230972] usb_suspend+0xcc/0x170 [ 56.234455] usb_dev_suspend+0x10/0x18 [ 56.238199] dpm_run_callback.isra.6+0x20/0x68 [ 56.242635] __device_suspend+0x110/0x308 [ 56.246637] async_suspend+0x24/0xa8 [ 56.250205] async_run_entry_fn+0x40/0xf8 [ 56.254210] process_one_work+0x1e0/0x320 [ 56.258211] worker_thread+0x40/0x450 [ 56.261867] kthread+0x124/0x128 [ 56.265094] ret_from_fork+0x10/0x18 [ 56.268661] ---[ end trace 86d7ec5de5c517af ]--- [ 56.273290] phy phy-ee080200.usb-phy.10: phy poweroff failed --> -5 Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 549b6b55b005 ("phy: renesas: rcar-gen3-usb2: enable/disable independent irqs") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-06-12phy: renesas: rcar-gen2: Fix memory leak at error pathsYoshihiro Shimoda
This patch fixes memory leak at error paths of the probe function. In for_each_child_of_node, if the loop returns, the driver should call of_put_node() before returns. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Fixes: 1233f59f745b237 ("phy: Renesas R-Car Gen2 PHY driver") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17phy: renesas: rcar-gen3-usb2: enable/disable independent irqsYoshihiro Shimoda
Since the previous code enabled/disabled the irqs both OHCI and EHCI, it is possible to cause unexpected interruptions. To avoid this, this patch creates multiple phy instances from phandle and enables/disables independent irqs by the instances. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Tested-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17phy: renesas: rcar-gen3-usb2: Use pdev's device pointer on dev_vdbg()Yoshihiro Shimoda
To implement multiple phy instances in the future, this patch uses pdev's device pointer on dev_vdbg() instead of the phy's device pointer. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17phy: rcar-gen3-usb2: Add support for r8a77470Biju Das
This patch adds support for r8a77470 (RZ/G1C). We can reuse this driver for initializing timing/interrupt generation registers. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-04-17phy: renesas: phy-rcar-gen2: Add support for r8a77470Biju Das
This patch adds support for RZ/G1C (r8a77470) SoC. RZ/G1C SoC has a PLL register shared between hsusb0 and hsusb1. Compared to other RZ/G1 and R-Car Gen2/3, USB Host needs to deassert the pll reset. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-and-Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: renesas: rcar-gen3-usb2: follow the hardware manual procedureYoshihiro Shimoda
This patch modifies rcar_gen3_init_otg() procedure to follow Figure 73.4 of "R-Car Series, 3rd Generation User's Manual: Hardware Rev.1.00". Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-26phy: renesas: convert to SPDX identifiersKuninori Morimoto
This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25phy: renesas: rcar-gen3-usb2: add is_otg_channel to use "role" sysfsYoshihiro Shimoda
Even if a board doesn't have otg pins connection, this hardware can change the role by a register setting. So, this patch adds "is_otg_channel" for it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25phy: renesas: rcar-gen3-usb2: add conditions for uses_otg_pins == falseYoshihiro Shimoda
If uses_otg_pins is set to false, this driver 1) should disable otg related interruptions, and 2) should not get ID pin signal, to avoid unexpected behaviors. So, this patch adds conditions for it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25phy: renesas: rcar-gen3-usb2: change a condition "dr_mode"Yoshihiro Shimoda
This patch changes a condition about dr_mode. If a device node has any dr_mode ("host", "peripheral" or "otg"), this driver allows to set "is_otg_channel" to true. Also, this patch keeps the dr_mode value for future use. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25phy: renesas: rcar-gen3-usb2: unify OBINTEN handlingYoshihiro Shimoda
This patch unifies the OBINTEN handling to clean-up the code. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25phy: renesas: rcar-gen3-usb2: Check a property to use otg pinsYoshihiro Shimoda
Since All R-Car Gen3 SoCs have dedicated otg pins actually but some boards don't use the otg pins (e.g. R-Car D3 Draak and R-Car E3 Ebisu), the driver should not choose SoC model base by using rcar_gen3_phy_usb2_match_table's data. So, this patch checks a "renesas,no-otg-pins" property to set the "uses_otg_pins". Note that since r8a77995-draak.dts and r8a77990-ebisu.dts don't have 'dr_mode = "otg";' for now, if we apply this patch, no behavior changes (the value of "uses_otg_pins" is false). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25phy: renesas: rcar-gen3-usb2: Rename has_otg_pins to uses_otg_pinsYoshihiro Shimoda
Since R-Car E3 and D3 have dedicated otg pins actually, "has_otg_pins" is possible to misread in the future. So, this patch renames has_otg_pins to uses_otg_pins. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-25phy: renesas: rcar-gen3-usb2: fix vbus_ctrl for role sysfsYoshihiro Shimoda
This patch fixes and issue that the vbus_ctrl is disabled by rcar_gen3_init_from_a_peri_to_a_host(), so a usb host cannot supply the vbus. Note that this condition will exit when the otg irq happens even if we don't apply this patch. Fixes: 9bb86777fb71 ("phy: rcar-gen3-usb2: add sysfs for usb role swap") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-10phy: renesas: use SPDX identifier for Renesas driversWolfram Sang
Use SPDX identifier for Renesas drivers. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-07-10phy: Renesas R-Car gen3 PCIe PHY driverSergei Shtylyov
This PHY is still mostly undocumented -- the only documented registers exist on R-Car V3H (R8A77980) SoC where this PHY stays in a powered-down state after a reset and thus we must power it up for PCIe to work... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-16phy: rcar-gen3-usb2: Add support for r8a77965Yoshihiro Shimoda
This patch adds support for r8a77965 (R-Car M3-N). This SoC has dedicated pins. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-12-15phy: rcar-gen3-usb2: select USB_COMMONArnd Bergmann
When USB is disabled, we get a link error for this driver because of the added OTG support drivers/phy/renesas/phy-rcar-gen3-usb2.o: In function `rcar_gen3_phy_usb2_probe': phy-rcar-gen3-usb2.c:(.text+0x250): undefined reference to `of_usb_get_dr_mode_by_phy' Other phy drivers select USB_COMMON for this, so let's do the same here. Fixes: 7e0540f41332 ("phy: rcar-gen3-usb2: check dr_mode for otg mode") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-27Merge tag 'extcon-next-for-4.15' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into usb-next Chanwoo writes: Update extcon for 4.15 Detailed description for this pull request: 1. Split out extcon header file for consumer and provider device : The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device. - include/linux/extcon-provider.h includes API for the provider device driver. - include/linux/extcon.h includes the API for the consumer device driver. 2. Support the SmartDock accessory on extcon-max77843.c device driver - Support the SmartDock accessory which detects following connectors at the same time. : USB host throught USB hub for mouse, keyboard and so on. : MHL connector for video output. : Charger connector for battery charging. - It tested with Unitek Y-2165 MHL+OTG Hub Smart Phone Dock. 3. Fix the minor issue of extcon driver - Delete the unneeded initialization in extcon-max14577. - Make extcon_info static const in order to fix the warning.
2017-10-23phy: rcar-gen3-usb2: add SoC-specific parameter for dedicated pinsYoshihiro Shimoda
This patch adds SoC-specific parameter to avoid reading/writing specific registers wrongly if this driver runs on a SoC which doesn't have dedicated pins (e.g. R-Car D3). This patch also changes the value "has_otg" to "has_otg_pins" for slightly easier reading of the code. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-23phy: rcar-gen3-usb2: use enum phy_mode in the role_store()Yoshihiro Shimoda
This patch modifies the role_store() to use "enum phy_mode" instead of the local "bool" for host/device mode selection. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-23phy: rcar-gen3-usb2: check dr_mode for otg modeYoshihiro Shimoda
The previous code assumed a channel has otg capability if a channel has interrupt property. But, it is not good because: - Battery charging feature also needs interrupt property. - Some R-Car Gen3 SoCs (e.g. R-Car D3) don't have OTG capability. So, this patch checks whether usb 2.0 host node has dr_mode property or not. If it has 'dr_mode = "otg";', this driver enables otg capability. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-10-23extcon: Split out extcon header file for consumer and provider deviceChanwoo Choi
The extcon has two type of extcon devices as following. - 'extcon provider deivce' adds new extcon device and detect the state/properties of external connector. Also, it notifies the state/properties to the extcon consumer device. - 'extcon consumer device' gets the change state/properties from extcon provider device. Prior to that, include/linux/extcon.h contains all exported API for both provider and consumer device driver. To clarify the meaning of header file and to remove the wrong use-case on consumer device, this patch separates into extcon.h and extcon-provider.h. [Description for include/linux/{extcon.h|extcon-provider.h}] - extcon.h includes the extcon API and data structure for extcon consumer device driver. This header file contains the following APIs: : Register/unregister the notifier to catch the change of extcon device : Get the extcon device instance : Get the extcon device name : Get the state of each external connector : Get the property value of each external connector : Get the property capability of each external connector - extcon-provider.h includes the extcon API and data structure for extcon provider device driver. This header file contains the following APIs: : Include 'include/linux/extcon.h' : Allocate the memory for extcon device instance : Register/unregister extcon device : Set the state of each external connector : Set the property value of each external connector : Set the property capability of each external connector Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-07phy: rcar-gen3-usb3: add support for R-Car Gen3 USB 3.0 PHYYoshihiro Shimoda
The USB 3.0 PHY modules of R-Car Gen3 SoCs have: - Spread spectrum clock (ssc). - Using USB 2.0 EXTAL clock instead of USB 3.0 clock. - Enabling VBUS detection for usb3.0 peripheral. So, this driver supports these features. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-01phy: Group vendor specific phy driversVivek Gautam
Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Also updated the MAINTAINERS file to reflect the correct directory structure for phy drivers. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: David S. Miller <davem@davemloft.net> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-usb@vger.kernel.org Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>