summaryrefslogtreecommitdiff
path: root/drivers/phy/motorola
AgeCommit message (Collapse)Author
2020-10-28phy: cpcap-usb: Use IRQF_ONESHOTZou Wei
Fixes coccicheck error: ./drivers/phy/motorola/phy-cpcap-usb.c:365:9-34: ERROR: Threaded IRQ with no primary handler requested without IRQF_ONESHOT Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1603875549-107500-1-git-send-email-zou_wei@huawei.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-13phy: mapphone-mdm6600: Add missing description for some structure fieldsVinod Koul
We get warning with W=1 build: drivers/phy/motorola/phy-mapphone-mdm6600.c:185: warning: Function parameter or member 'val' not described in 'phy_mdm6600_cmd' drivers/phy/motorola/phy-mapphone-mdm6600.c:200: warning: Function parameter or member 'work' not described in 'phy_mdm6600_status' Fix that by adding description for 'val' and 'work' Link: https://lore.kernel.org/r/20200708132809.265967-2-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-13phy: cpcap-usb: Remove some useless codeChristophe JAILLET
Axe a clk that is unused in the driver. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200507203127.202197-1-christophe.jaillet@wanadoo.fr Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-02-27phy: mapphone-mdm6600: Fix timeouts by adding wake-up handlingTony Lindgren
We have an interrupt handler for the wake-up GPIO pin, but we're missing the code to wake-up the system. This can cause timeouts receiving data for the UART that shares the wake-up GPIO pin with the USB PHY. All we need to do is just wake the system and kick the autosuspend timeout to fix the issue. Fixes: 5d1ebbda0318 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4") Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-02-19phy: mapphone-mdm6600: Fix write timeouts with shorter GPIO toggle intervalTony Lindgren
I've noticed that when writing data to the modem the writes can time out at some point eventually. Looks like kicking the modem idle GPIO every 600 ms instead of once a second fixes the issue. Note that this rate is different from our runtime PM autosuspend rate MDM6600_MODEM_IDLE_DELAY_MS that we still want to keep at 1 second, so let's add a separate define for PHY_MDM6600_IDLE_KICK_MS. Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend") Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-26phy: cpcap-usb: Drop extra write to usb2 registerTony Lindgren
We are currently writing the same register twice. Let's enable the USB PHY only at the end of the function. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-26phy: cpcap-usb: Improve host vs docked mode detectionTony Lindgren
When docked to a Motorola lapdock or media dock, we're in USB A-host mode with VBUS provided by the dock. When in regular USB A-host mode, we're providing the VBUS. And in regular USB A-host mode we must also keep kicking the VBUS to keep it active. Let's wait a bit before configuring the USB PHY to allow some time between the ID and VBUS changes. And let's add vbus_provider flag so we can detect docked mode and regularo USB A-host mode better. With better USB A-host mode detection, we can now also just kick the VBUS to keep it enabled and leave out the unnecessary line muxing. We only need to set and clear vbus_provider in the delayed work so no locking is needed for it currently. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-26phy: cpcap-usb: Prevent USB line glitches from waking up modemTony Lindgren
The micro-USB connector on Motorola Mapphone devices can be muxed between the SoC and the mdm6600 modem. But even when used for the SoC, configuring the PHY with ID pin grounded will wake up the modem from idle state. Looks like the issue is probably caused by line glitches. We can prevent the glitches by using a previously unknown mode of the GPIO mux to prevent the USB lines from being connected to the moden while configuring the USB PHY, and enable the USB lines after configuring the PHY. Note that this only prevents waking up mdm6600 as regular USB A-host mode, and does not help when connected to a lapdock. The lapdock specific issue still needs to be debugged separately. Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-26phy: mapphone-mdm6600: Fix uninitialized status value regressionTony Lindgren
Only the used bits get cleared with bitmap_zero() when we call gpiod_get_array_value_cansleep(). We must mask only the bits we're using for ddata->status as the other bits in the bitmap may not be initialized. And let's also drop useless debug code accidentally left over while at it. Fixes: b9762bebc633 ("gpiolib: Pass bitmaps, not integer arrays, to get/set array") Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-26phy: cpcap-usb: Fix flakey host idling and enumerating of devicesTony Lindgren
We must let the USB host idle things properly before we switch to debug UART mode. Otherwise the USB host may never idle after disconnecting devices, and that causes the next enumeration to be flakey. Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support") Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-12-20phy: cpcap-usb: Fix error path when no host driver is loadedTony Lindgren
If musb_mailbox() returns an error, we must still continue to finish configuring the phy. Otherwise the phy state may end up only half initialized, and this can cause the debug serial console to stop working. And this will happen if the usb driver musb controller is not loaded. Let's fix the issue by adding helper for cpcap_usb_try_musb_mailbox(). Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support") Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2019-09-02power: supply: cpcap-charger: Enable vbus boost voltageTony Lindgren
We are currently not enabling VBUS boost for cpcap when in host mode. This means the VBUS is fed at the battery voltage level, which can cause flakeyness enumerating devices. Looks like the boost control for VBUS is CPCAP_BIT_VBUS_SWITCH that we must enable in the charger for nice 4.92 V VBUS output. And looks like we must not use the STBY pin enabling but must instead use manual VBUS control in phy-cpcap-usb. We want to do this in cpcap_charger_vbus_work() and also set a flag for feeding_vbus to avoid races between USB detection and charger detection, and disable charging if feeding_vbus is set. Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-17phy: mapphone-mdm6600: add gpiolib dependencyArnd Bergmann
gcc points out that when CONFIG_GPIOLIB is disabled, gpiod_get_array_value_cansleep() returns 0 but fails to set its output: drivers/phy/motorola/phy-mapphone-mdm6600.c: In function 'phy_mdm6600_status': drivers/phy/motorola/phy-mapphone-mdm6600.c:220:24: error: 'values[0]' is used uninitialized in this function [-Werror=uninitialized] This could be fixed more generally in gpiolib by returning a failure code, but for this specific case, the easier workaround is to add a gpiolib dependency. Fixes: 5d1ebbda0318 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-12-12phy: mapphone-mdm6600: Improve phy related runtime PM callsTony Lindgren
I noticed that phy_pm_runtime_get_sync() and phy_pm_runtime_put() are not currently doing anything for phy-mapphone-mdm6600, only the sysfs interface for works for "auto" and "on". This is because of the shared GPIO pins between mdm6600 USB port and n_gsm port. We have not enabled runtime PM for the phy driver until after we've booted up mdm6600 properly to the USB mode. Otherwise phy_create() would have called pm_runtime_enable() and pm_runtime_no_callbacks() automatically on init. Let's fix this by registering the phy a bit later after we've powered up the mdm6600 USB port. And as the PM runtime support is only needed for the n_gsm mode and not for USB, we can allow the device to idle between phy_mdm6600_power_on() and phy_mdm6600_power_off(). Note that for suspend, runtime_pm is already disabled for the phy so we need to check for pm_runtime_enabled(). Cc: Johan Hovold <jhovold@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-09-13gpiolib: Pass array info to get/set array functionsJanusz Krzysztofik
In order to make use of array info obtained from gpiod_get_array() and speed up processing of arrays matching single GPIO chip layout, that information must be passed to get/set array functions. Extend the functions' API with that additional parameter and update all users. Pass NULL if a user builds an array itself from single GPIOs. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-13gpiolib: Pass bitmaps, not integer arrays, to get/set arrayJanusz Krzysztofik
Most users of get/set array functions iterate consecutive bits of data, usually a single integer, while processing array of results obtained from, or building an array of values to be passed to those functions. Save time wasted on those iterations by changing the functions' API to accept bitmaps. All current users are updated as well. More benefits from the change are expected as soon as planned support for accepting/passing those bitmaps directly from/to respective GPIO chip callbacks if applicable is implemented. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-29phy: mapphone-mdm6600: Fix wrong enum used for status linesTony Lindgren
Kbuilt test robot reported: drivers/phy/motorola/phy-mapphone-mdm6600.c:188:16: warning: is used uninitialized in this function [-Wuninitialized] val |= values[i] << i; ~~~~~~^~~ Looking at the phy_mdm6600_status() values does get initialized by gpiod_get_array_value_cansleep(), but we are using wrong enum in that function. Let's fix the use, both end up being three though so urgent rush on this one AFAIK. Fixes: 5d1ebbda0318 ("phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-05-20phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspendTony Lindgren
We can suspend the mdm6600 over USB via sysfs and then mdm6600 enters a low-power idle mode. In the low-power mode, mdm6600 radio and n_gsm uart are functional but we need to use USB mode0 GPIO pin to send a wake-up pulse to the modem to talk with it over n_gsm. As the GPIO mode0 line is dual purposed and and also needed by the USB PHY driver to boot mdm6600 into the correct USB mode, let's also manage the wake-up GPIO in the USB PHY driver. For the USB PHY idle, there does not anything specific we need to do for runtime PM after getting the PHY configured. The PHY framework already idles the USB PHY when not in use separately from the mdm6600 state. It seems that it takes about 100 - 200ms for mdm6600 to wake up from the low-power idle mode. And then mdm6600 stays awake about 1.2s until it needs to be kicked again. The mdm6600 status GPIO pins don't seem to change state when mdm6600 changes between normal and idle mode. Let's manage the mdm6600 mode with runtime PM. If phy-mapphone-mdm6600 sysfs entry for power/control is set to "on", we keep mdm6600 out of idle by kicking the GPIO line. If the entry is set to "auto" we let mdm6600 enter low-power state. Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-16phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4Tony Lindgren
Let's add support for the GPIO controlled USB PHY on the MDM6600 modem. It is used on some Motorola Mapphone series of phones and tablets such as Droid 4. The MDM6600 is hardwired to the first OHCI port in the Droid 4 case, and is controlled by several GPIOs. The USB PHY is integrated into the MDM6600 device it seems. We know this as we get L3 errors from omap-usb-host if trying to use the PHY before MDM6600 is configured. The GPIOs controlling MDM6600 are used to power device on and off, to configure the USB start-up mode (normal mode versus USB flashing), and they also tell the state of the MDM6600 device. The two start-up mode GPIOs are dual-purposed and used for out of band (OOB) wake-up for USB and TS 27.010 serial mux. But we need to configure the USB start-up mode first to get MDM6600 booted in the right mode to be usable in the first place. Note that the Motorola Mapphone Linux kernel tree has a "radio-ctrl" driver for modems. But it really does not control the radio at all, it just controls the modem power and start-up mode for USB. So I came to the conclusion that we're better off having this done in the USB PHY driver. For adding support for USB flashing mode, we can later on add a kernel module option for flash_mode=1 or something similar. Also note that currently there is no PM runtime support for the OHCI on omap variant SoCs. So for low(er) power idle states, currenty both ohci-platform and phy-mapphone-mdm6600 must be unloaded or unbound. For reference here is what I measured for total power consumption on an idle Droid 4 with and without USB related MDM6600 modules: idle lcd off phy-mapphone-mdm6600 ohci-platform 153mW 284mW 344mW So it seems that MDM6600 is currently not yet idling even with it's radio turned off, but that's something that is beyond the control of this USB PHY driver. This patch does get us to the point where modem data and GPS are usable with libqmi and ModemManager for example. Voice calls need more audio driver work. Cc: devicetree@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-12-15phy: cpcap-usb: Fix platform_get_irq_byname's error checking.Arvind Yadav
The platform_get_irq_byname() function returns negative if an error occurs. zero or positive number on success. platform_get_irq_byname() error checking for zero is not correct. Fixes: 6d6ce40f63af ("phy: cpcap-usb: Add CPCAP PMIC USB support") Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-08-22phy: cpcap-usb: remove a stray tabDan Carpenter
This line was indented further that it should have been. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-16phy: cpcap-usb: Fix missing return statementTony Lindgren
Commit 8ae904e3c236 ("phy: cpcap-usb: Add CPCAP PMIC USB support") is missing return statement as noted by Colin Ian King <colin.king@canonical.com>. If the optional pins are not configured, we just want to return early and not attempt to configure the pins. Fixes: 8ae904e3c236 ("phy: cpcap-usb: Add CPCAP PMIC USB support") Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-09phy: cpcap-usb: add MUSB dependencyArnd Bergmann
When MUSB is a loadable module, we get a link error for a built-in CPCAP driver: drivers/phy/built-in.o: In function `cpcap_usb_phy_remove': phy-cpcap-usb.c:(.text+0xed9): undefined reference to `musb_mailbox' This adds a Kconfig dependency to prevent this broken configuration, enforcing that CPCAP can only be a module when MUSB is also a module. Fixes: 68a1f7c9d470 ("phy: cpcap-usb: Add CPCAP PMIC USB support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2017-06-06phy: cpcap-usb: Add CPCAP PMIC USB supportTony Lindgren
Some Motorola phones like droid 4 use a custom CPCAP PMIC that has a multiplexing USB PHY. This USB PHY can operate at least in four modes using pin multiplexing and two control GPIOS: - Pass through companion PHY for the SoC USB PHY - ULPI PHY for the SoC - Pass through USB for the modem - UART debug console for the SoC This patch adds support for droid 4 USB PHY and debug UART modes, support for other modes can be added later on as needed. Both peripheral and host mode are working for the USB. The host mode depends on the cpcap-charger driver for VBUS. VBUS and ID pin detection are done using cpcap-adc IIO ADC driver. Cc: devicetree@vger.kernel.org Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>