linux.git - Unnamed repository; edit this file 'description' to name the repository.

Age	Commit message (Collapse)	Author
2018-12-12	phy: core: rework phy_set_mode to accept phy mode and submode	Grygorii Strashko
	Currently the attempt to add support for Ethernet interface mode PHY (MII/GMII/RGMII) will lead to the necessity of extending enum phy_mode and duplicate there values from phy_interface_t enum (or introduce more PHY callbacks) [1]. Both approaches are ineffective and would lead to fast bloating of enum phy_mode or struct phy_ops in the process of adding more PHYs for different subsystems which will make them unmaintainable. As discussed in [1] the solution could be to introduce dual level PHYs mode configuration - PHY mode and PHY submode. The PHY mode will define generic PHY type (subsystem - PCIE/ETHERNET/USB_) while the PHY submode - subsystem specific interface mode. The last is usually already defined in corresponding subsystem headers (phy_interface_t for Ethernet, enum usb_device_speed for USB). This patch is cumulative change which refactors PHY framework code to support dual level PHYs mode configuration - PHY mode and PHY submode. It extends .set_mode() callback to support additional parameter "int submode" and converts all corresponding PHY drivers to support new .set_mode() callback declaration. The new extended PHY API int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode) is introduced to support dual level PHYs mode configuration and existing phy_set_mode() API is converted to macros, so PHY framework consumers do not need to be changed (~21 matches). [1] http://lkml.kernel.org/r/d63588f6-9ab0-848a-5ad4-8073143bd95d@ti.com Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-03-16	phy: amlogic: add USB3 PHY support for Meson GXL and GXM	Martin Blumenstingl
	This adds a new driver for the USB3 PHY found on Meson GXL and GXM SoCs (both SoCs are using the same USB PHY register layout). Unfortunately there is no documentation for this PHY in the public S905X datasheet (published for example by Khadas). What we know so far about this PHY: - even though the Meson GXL and GXM SoCs do not expose an USB3 port (the dwc3 controller only has USB2 ports enabled) we need to initialize the USB3 PHY (specifically USB_R1_U3H_FLADJ_30MHZ_REG_MASK). Without this initialization high-speed USB devices (especially USB hard disks and thumb drives, slower devices like mice do not seem to be affected) - on some boards the USB3 PHY starts in "device mode" - we want to bring it into a known state (by switching it to host mode for now). - it is responsible for the OTG detection and for switching the first USB2 PHY between host and peripheral (aka device) mode. an interrupt can be used to detect changes between host and device mode. There are five inputs to this register area: - the clock and reset line for the USB3 PHY itself - the clock and reset line for the peripheral mode and OTG detection logic (on the GXL and GXM SoCs these are the same clock and reset line as for the USB3 PHY itself, but Amlogic sees this as two different components - even though they share the same register space - so they have to be passed individually to allow specifying different inputs on other SoCs if needed) - the interrupt for the OTG detection logic The whole OTG detection logic is not implemented yet. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Yixun Lan <yixun.lan@amlogic.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>