summaryrefslogtreecommitdiff
path: root/drivers/perf
AgeCommit message (Collapse)Author
2020-08-07Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "It looks like a smaller batch of clk updates this time around. In the core framework we just have some minor tweaks and a debugfs feature, so not much to see there. The driver updates are fairly well split between AT91 and Qualcomm clk support. Adding those two drivers together equals about 50% of the diffstat. Otherwise, the big amount of work this time was on supporting Broadcom's Raspberry Pi firmware clks. Highlights: Core: - Document clk_hw_round_rate() so it gets some more use - Remove unused __clk_get_flags() - Add a prepare/enable debugfs feature similar to rate setting New Drivers: - Add support for SAMA7G5 SoC clks - Enable CPU clks on Qualcomm IPQ6018 SoCs - Enable CPU clks on Qualcomm MSM8996 SoCs - GPU clk support for Qualcomm SM8150 and SM8250 SoCs - Audio clks on Qualcomm SC7180 SoCs - Microchip Sparx5 DPLL clk - Add support for the new Renesas RZ/G2H (R8A774E1) SoC Updates: - Make defines for bcm63xx-gate clks to use in DT - Support BCM2711 SoC firmware clks - Add HDMI clks for BCM2711 SoCs - Add RTC related clks on Ingenic SoCs - Support USB PHY clks on Ingenic SoCs - Support gate clks on BCM6318 SoCs - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs - Use poll_timeout functions in Rockchip clk driver - Support Rockchip rk3288w SoC variant - Mark mac_lbtest critical on Rockchip rk3188 - Add CAAM clock support for i.MX vf610 driver - Add MU root clock support for i.MX imx8mp driver - Amlogic g12: add neural network accelerator clock sources - Amlogic meson8: remove critical flag for main PLL divider - Amlogic meson8: add video decoder clock gates - Convert one more Renesas DT binding to json-schema - Enhance critical clock handling on Renesas platforms to only consider clocks that were enabled at boot time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (79 commits) clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845 ipq806x: gcc: add support for child probe clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static clk: qcom: ipq8074: Add correct index for PCIe clocks clk: <linux/clk-provider.h>: drop a duplicated word clk: renesas: cpg-mssr: Add r8a774e1 support dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1 clk: Drop duplicate selection in Kconfig clk: qcom: smd: Add support for MSM8992/4 rpm clocks clk: qcom: ipq8074: Add missing clocks for pcie dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe Replace HTTP links with HTTPS ones: Common CLK framework clk: qcom: Add CPU clock driver for msm8996 dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996 soc: qcom: Separate kryo l2 accessors from PMU driver clk: meson: meson8b: add the vclk2_en gate clock clk: meson: meson8b: add the vclk_en gate clock clk: qcom: Fix return value check in apss_ipq6018_probe() clk: bcm: dvp: Add missing module informations clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2 ...
2020-08-03Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 and cross-arch updates from Catalin Marinas: "Here's a slightly wider-spread set of updates for 5.9. Going outside the usual arch/arm64/ area is the removal of read_barrier_depends() series from Will and the MSI/IOMMU ID translation series from Lorenzo. The notable arm64 updates include ARMv8.4 TLBI range operations and translation level hint, time namespace support, and perf. Summary: - Removal of the tremendously unpopular read_barrier_depends() barrier, which is a NOP on all architectures apart from Alpha, in favour of allowing architectures to override READ_ONCE() and do whatever dance they need to do to ensure address dependencies provide LOAD -> LOAD/STORE ordering. This work also offers a potential solution if compilers are shown to convert LOAD -> LOAD address dependencies into control dependencies (e.g. under LTO), as weakly ordered architectures will effectively be able to upgrade READ_ONCE() to smp_load_acquire(). The latter case is not used yet, but will be discussed further at LPC. - Make the MSI/IOMMU input/output ID translation PCI agnostic, augment the MSI/IOMMU ACPI/OF ID mapping APIs to accept an input ID bus-specific parameter and apply the resulting changes to the device ID space provided by the Freescale FSL bus. - arm64 support for TLBI range operations and translation table level hints (part of the ARMv8.4 architecture version). - Time namespace support for arm64. - Export the virtual and physical address sizes in vmcoreinfo for makedumpfile and crash utilities. - CPU feature handling cleanups and checks for programmer errors (overlapping bit-fields). - ACPI updates for arm64: disallow AML accesses to EFI code regions and kernel memory. - perf updates for arm64. - Miscellaneous fixes and cleanups, most notably PLT counting optimisation for module loading, recordmcount fix to ignore relocations other than R_AARCH64_CALL26, CMA areas reserved for gigantic pages on 16K and 64K configurations. - Trivial typos, duplicate words" Link: http://lkml.kernel.org/r/20200710165203.31284-1-will@kernel.org Link: http://lkml.kernel.org/r/20200619082013.13661-1-lorenzo.pieralisi@arm.com * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (82 commits) arm64: use IRQ_STACK_SIZE instead of THREAD_SIZE for irq stack arm64/mm: save memory access in check_and_switch_context() fast switch path arm64: sigcontext.h: delete duplicated word arm64: ptrace.h: delete duplicated word arm64: pgtable-hwdef.h: delete duplicated words bus: fsl-mc: Add ACPI support for fsl-mc bus/fsl-mc: Refactor the MSI domain creation in the DPRC driver of/irq: Make of_msi_map_rid() PCI bus agnostic of/irq: make of_msi_map_get_device_domain() bus agnostic dt-bindings: arm: fsl: Add msi-map device-tree binding for fsl-mc bus of/device: Add input id to of_dma_configure() of/iommu: Make of_map_rid() PCI agnostic ACPI/IORT: Add an input ID to acpi_dma_configure() ACPI/IORT: Remove useless PCI bus walk ACPI/IORT: Make iort_msi_map_rid() PCI agnostic ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic ACPI/IORT: Make iort_match_node_callback walk the ACPI namespace for NC arm64: enable time namespace support arm64/vdso: Restrict splitting VVAR VMA arm64/vdso: Handle faults on timens page ...
2020-07-17drivers/perf: Prevent forced unbinding of PMU driversQi Liu
Forcefully unbinding PMU drivers during perf sampling will lead to a kernel panic, because the perf upper-layer framework call a NULL pointer in this situation. To solve this issue, "suppress_bind_attrs" should be set to true, so that bind/unbind can be disabled via sysfs and prevent unbinding PMU drivers during perf sampling. Signed-off-by: Qi Liu <liuqi115@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1594975763-32966-1-git-send-email-liuqi115@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-16drivers/perf: Fix kernel panic when rmmod PMU modules during perf samplingQi Liu
When users try to remove PMU modules during perf sampling, kernel panic will happen because the pmu->read() is a NULL pointer here. INFO on HiSilicon hip08 platform as follow: pc : hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu] lr : hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu] sp : ffff800010103e90 x29: ffff800010103e90 x28: ffff0027db0c0e40 x27: ffffa29a76f129d8 x26: ffffa29a77ceb000 x25: ffffa29a773a5000 x24: ffffa29a77392000 x23: ffffddffe5943f08 x22: ffff002784285960 x21: ffff002784285800 x20: ffff0027d2e76c80 x19: ffff0027842859e0 x18: ffff80003498bcc8 x17: ffffa29a76afe910 x16: ffffa29a7583f530 x15: 16151a1512061a1e x14: 0000000000000000 x13: ffffa29a76f1e238 x12: 0000000000000001 x11: 0000000000000400 x10: 00000000000009f0 x9 : ffff8000107b3e70 x8 : ffff0027db0c1890 x7 : ffffa29a773a7000 x6 : 00000007f5131013 x5 : 00000007f5131013 x4 : 09f257d417c00000 x3 : 00000002187bd7ce x2 : ffffa29a38f0f0d8 x1 : ffffa29a38eae268 x0 : ffff0027d2e76c80 Call trace: hisi_uncore_pmu_event_update+0x30/0xa4 [hisi_uncore_pmu] hisi_uncore_pmu_read+0x20/0x2c [hisi_uncore_pmu] __perf_event_read+0x1a0/0x1f8 flush_smp_call_function_queue+0xa0/0x160 generic_smp_call_function_single_interrupt+0x18/0x20 handle_IPI+0x31c/0x4dc gic_handle_irq+0x2c8/0x310 el1_irq+0xcc/0x180 arch_cpu_idle+0x4c/0x20c default_idle_call+0x20/0x30 do_idle+0x1b4/0x270 cpu_startup_entry+0x28/0x30 secondary_start_kernel+0x1a4/0x1fc To solve the above issue, current module should be registered to kernel, so that try_module_get() can be invoked when perf sampling starts. This adds the reference counting of module and could prevent users from removing modules during sampling. Reported-by: Haifeng Wang <wang.wanghaifeng@huawei.com> Signed-off-by: Qi Liu <liuqi115@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1594891165-8228-1-git-send-email-liuqi115@huawei.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-13perf/smmuv3: To simplify code for ioremap page in pmcgJay Chen
Use the devm_platform_get_and_ioremap_resource to simplify the code a bit. Signed-off-by: Jay Chen <jkchen@linux.alibaba.com> Link: https://lore.kernel.org/r/20200706112246.92220-2-jkchen@linux.alibaba.com Signed-off-by: Will Deacon <will@kernel.org>
2020-07-10soc: qcom: Separate kryo l2 accessors from PMU driverIlia Lin
The driver provides kernel level API for other drivers to access the MSM8996 L2 cache registers. Separating the L2 access code from the PMU driver and making it public to allow other drivers use it. The accesses must be separated with a single spinlock, maintained in this driver. Signed-off-by: Ilia Lin <ilialin@codeaurora.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/1593766185-16346-2-git-send-email-loic.poulain@linaro.org Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-06-11Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "arm64 fixes that came in during the merge window. There will probably be more to come, but it doesn't seem like it's worth me sitting on these in the meantime. - Fix SCS debug check to report max stack usage in bytes as advertised - Fix typo: CONFIG_FTRACE_WITH_REGS => CONFIG_DYNAMIC_FTRACE_WITH_REGS - Fix incorrect mask in HiSilicon L3C perf PMU driver - Fix compat vDSO compilation under some toolchain configurations - Fix false UBSAN warning from ACPI IORT parsing code - Fix booting under bootloaders that ignore TEXT_OFFSET - Annotate debug initcall function with '__init'" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: warn on incorrect placement of the kernel by the bootloader arm64: acpi: fix UBSAN warning arm64: vdso32: add CONFIG_THUMB2_COMPAT_VDSO drivers/perf: hisi: Fix wrong value for all counters enable arm64: ftrace: Change CONFIG_FTRACE_WITH_REGS to CONFIG_DYNAMIC_FTRACE_WITH_REGS arm64: debug: mark a function as __init to save some memory scs: Report SCS usage in bytes rather than number of entries
2020-06-08drivers/perf: hisi: Fix wrong value for all counters enableShaokun Zhang
In L3C uncore PMU drivers, bit16 is used to control all counters enable & disable. Wrong value is given in the driver and its default value is 1'b1, it can work because each PMU counter has its own control bits too. Let's fix the wrong value. Fixes: 2940bc433370 ("perf: hisi: Add support for HiSilicon SoC L3C PMU driver") Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/1591350221-32275-1-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Will Deacon <will@kernel.org>
2020-06-01Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Will Deacon: "A sizeable pile of arm64 updates for 5.8. Summary below, but the big two features are support for Branch Target Identification and Clang's Shadow Call stack. The latter is currently arm64-only, but the high-level parts are all in core code so it could easily be adopted by other architectures pending toolchain support Branch Target Identification (BTI): - Support for ARMv8.5-BTI in both user- and kernel-space. This allows branch targets to limit the types of branch from which they can be called and additionally prevents branching to arbitrary code, although kernel support requires a very recent toolchain. - Function annotation via SYM_FUNC_START() so that assembly functions are wrapped with the relevant "landing pad" instructions. - BPF and vDSO updates to use the new instructions. - Addition of a new HWCAP and exposure of BTI capability to userspace via ID register emulation, along with ELF loader support for the BTI feature in .note.gnu.property. - Non-critical fixes to CFI unwind annotations in the sigreturn trampoline. Shadow Call Stack (SCS): - Support for Clang's Shadow Call Stack feature, which reserves platform register x18 to point at a separate stack for each task that holds only return addresses. This protects function return control flow from buffer overruns on the main stack. - Save/restore of x18 across problematic boundaries (user-mode, hypervisor, EFI, suspend, etc). - Core support for SCS, should other architectures want to use it too. - SCS overflow checking on context-switch as part of the existing stack limit check if CONFIG_SCHED_STACK_END_CHECK=y. CPU feature detection: - Removed numerous "SANITY CHECK" errors when running on a system with mismatched AArch32 support at EL1. This is primarily a concern for KVM, which disabled support for 32-bit guests on such a system. - Addition of new ID registers and fields as the architecture has been extended. Perf and PMU drivers: - Minor fixes and cleanups to system PMU drivers. Hardware errata: - Unify KVM workarounds for VHE and nVHE configurations. - Sort vendor errata entries in Kconfig. Secure Monitor Call Calling Convention (SMCCC): - Update to the latest specification from Arm (v1.2). - Allow PSCI code to query the SMCCC version. Software Delegated Exception Interface (SDEI): - Unexport a bunch of unused symbols. - Minor fixes to handling of firmware data. Pointer authentication: - Add support for dumping the kernel PAC mask in vmcoreinfo so that the stack can be unwound by tools such as kdump. - Simplification of key initialisation during CPU bringup. BPF backend: - Improve immediate generation for logical and add/sub instructions. vDSO: - Minor fixes to the linker flags for consistency with other architectures and support for LLVM's unwinder. - Clean up logic to initialise and map the vDSO into userspace. ACPI: - Work around for an ambiguity in the IORT specification relating to the "num_ids" field. - Support _DMA method for all named components rather than only PCIe root complexes. - Minor other IORT-related fixes. Miscellaneous: - Initialise debug traps early for KGDB and fix KDB cacheflushing deadlock. - Minor tweaks to early boot state (documentation update, set TEXT_OFFSET to 0x0, increase alignment of PE/COFF sections). - Refactoring and cleanup" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits) KVM: arm64: Move __load_guest_stage2 to kvm_mmu.h KVM: arm64: Check advertised Stage-2 page size capability arm64/cpufeature: Add get_arm64_ftr_reg_nowarn() ACPI/IORT: Remove the unused __get_pci_rid() arm64/cpuinfo: Add ID_MMFR4_EL1 into the cpuinfo_arm64 context arm64/cpufeature: Add remaining feature bits in ID_AA64PFR1 register arm64/cpufeature: Add remaining feature bits in ID_AA64PFR0 register arm64/cpufeature: Add remaining feature bits in ID_AA64ISAR0 register arm64/cpufeature: Add remaining feature bits in ID_MMFR4 register arm64/cpufeature: Add remaining feature bits in ID_PFR0 register arm64/cpufeature: Introduce ID_MMFR5 CPU register arm64/cpufeature: Introduce ID_DFR1 CPU register arm64/cpufeature: Introduce ID_PFR2 CPU register arm64/cpufeature: Make doublelock a signed feature in ID_AA64DFR0 arm64/cpufeature: Drop TraceFilt feature exposure from ID_DFR0 register arm64/cpufeature: Add explicit ftr_id_isar0[] for ID_ISAR0 register arm64: mm: Add asid_gen_match() helper firmware: smccc: Fix missing prototype warning for arm_smccc_version_init arm64: vdso: Fix CFI directives in sigreturn trampoline arm64: vdso: Don't prefix sigreturn trampoline with a BTI C instruction ...
2020-05-18pmu/smmuv3: Clear IRQ affinity hint on device removalJean-Philippe Brucker
Currently when trying to remove the SMMUv3 PMU module we get a WARN_ON_ONCE from free_irq(), because the affinity hint set during probe hasn't been properly cleared. [ 238.878383] WARNING: CPU: 0 PID: 175 at kernel/irq/manage.c:1744 free_irq+0x324/0x358 ... [ 238.897263] Call trace: [ 238.897998] free_irq+0x324/0x358 [ 238.898792] devm_irq_release+0x18/0x28 [ 238.899189] release_nodes+0x1b0/0x228 [ 238.899984] devres_release_all+0x38/0x60 [ 238.900779] device_release_driver_internal+0x10c/0x1d0 [ 238.901574] driver_detach+0x50/0xe0 [ 238.902368] bus_remove_driver+0x5c/0xd8 [ 238.903448] driver_unregister+0x30/0x60 [ 238.903958] platform_driver_unregister+0x14/0x20 [ 238.905075] arm_smmu_pmu_exit+0x1c/0xecc [arm_smmuv3_pmu] [ 238.905547] __arm64_sys_delete_module+0x14c/0x260 [ 238.906342] el0_svc_common.constprop.0+0x74/0x178 [ 238.907355] do_el0_svc+0x24/0x90 [ 238.907932] el0_sync_handler+0x11c/0x198 [ 238.908979] el0_sync+0x158/0x180 Just like the other perf drivers, clear the affinity hint before releasing the device. Fixes: 7d839b4b9e00 ("perf/smmuv3: Add arm64 smmuv3 pmu driver") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Link: https://lore.kernel.org/r/20200422084805.237738-1-jean-philippe@linaro.org Signed-off-by: Will Deacon <will@kernel.org>
2020-05-18drivers/perf: hisi: Permit modular builds of HiSilicon uncore driversZhou Wang
This patch lets HiSilicon uncore PMU driver can be built as modules. A common module and three specific uncore PMU driver modules will be built. Export necessary functions in hisi_uncore_pmu module, and change irq_set_affinity to irq_set_affinity_hint to pass compile. Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Tested-by: Qi Liu <liuqi115@huawei.com> Reviewed-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Link: https://lore.kernel.org/r/1588820305-174479-1-git-send-email-wangzhou1@hisilicon.com Signed-off-by: Will Deacon <will@kernel.org>
2020-04-30drivers/perf: hisi: Fix typo in events attribute arrayShaokun Zhang
Fix up one typo: wr_dr_64b -> wr_ddr_64b. Fixes: 2bab3cf9104c ("perf: hisi: Add support for HiSilicon SoC HHA PMU driver") Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/1587643530-34357-1-git-send-email-zhangshaokun@hisilicon.com Signed-off-by: Will Deacon <will@kernel.org>
2020-04-30drivers/perf: arm_spe_pmu: Avoid duplicate printoutsTang Bin
platform_get_irq() already screams on failure, so the redundant call to dev_err() can be removed. Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20200402120330.19468-1-tangbin@cmss.chinamobile.com Signed-off-by: Will Deacon <will@kernel.org>
2020-04-30drivers/perf: arm_dsu_pmu: Avoid duplicate printoutsTang Bin
platform_get_irq() already screams on failure, so the redundant call to dev_err() can be removed. Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com> Link: https://lore.kernel.org/r/20200402115940.4928-1-tangbin@cmss.chinamobile.com Signed-off-by: Will Deacon <will@kernel.org>
2020-04-16drivers/perf: Open access for CAP_PERFMON privileged processAlexey Budankov
Open access to monitoring for CAP_PERFMON privileged process. Providing the access under CAP_PERFMON capability singly, without the rest of CAP_SYS_ADMIN credentials, excludes chances to misuse the credentials and makes operation more secure. CAP_PERFMON implements the principle of least privilege for performance monitoring and observability operations (POSIX IEEE 1003.1e 2.2.2.39 principle of least privilege: A security design principle that states that a process or program be granted only those privileges (e.g., capabilities) necessary to accomplish its legitimate function, and only for the time that such privileges are actually required) For backward compatibility reasons access to the monitoring remains open for CAP_SYS_ADMIN privileged processes but CAP_SYS_ADMIN usage for secure monitoring is discouraged with respect to CAP_PERFMON capability. Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Acked-by: Will Deacon <will@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Igor Lubashev <ilubashe@akamai.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Serge Hallyn <serge@hallyn.com> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: intel-gfx@lists.freedesktop.org Cc: linux-doc@vger.kernel.org Cc: linux-man@vger.kernel.org Cc: linux-security-module@vger.kernel.org Cc: selinux@vger.kernel.org Link: http://lore.kernel.org/lkml/4ec1d6f7-548c-8d1c-f84a-cebeb9674e4e@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-03-31Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "The bulk is in-kernel pointer authentication, activity monitors and lots of asm symbol annotations. I also queued the sys_mremap() patch commenting the asymmetry in the address untagging. Summary: - In-kernel Pointer Authentication support (previously only offered to user space). - ARM Activity Monitors (AMU) extension support allowing better CPU utilisation numbers for the scheduler (frequency invariance). - Memory hot-remove support for arm64. - Lots of asm annotations (SYM_*) in preparation for the in-kernel Branch Target Identification (BTI) support. - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU init callbacks, support for new DT compatibles. - IPv6 header checksum optimisation. - Fixes: SDEI (software delegated exception interface) double-lock on hibernate with shared events. - Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm() converted to C, cpufeature finalisation helper. - sys_mremap() comment explaining the asymmetric address untagging behaviour" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits) mm/mremap: Add comment explaining the untagging behaviour of mremap() arm64: head: Convert install_el2_stub to SYM_INNER_LABEL arm64: Introduce get_cpu_ops() helper function arm64: Rename cpu_read_ops() to init_cpu_ops() arm64: Declare ACPI parking protocol CPU operation if needed arm64: move kimage_vaddr to .rodata arm64: use mov_q instead of literal ldr arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH lkdtm: arm64: test kernel pointer authentication arm64: compile the kernel with ptrauth return address signing kconfig: Add support for 'as-option' arm64: suspend: restore the kernel ptrauth keys arm64: __show_regs: strip PAC from lr in printk arm64: unwind: strip PAC from kernel addresses arm64: mask PAC bits of __builtin_return_address arm64: initialize ptrauth keys for kernel booting task arm64: initialize and switch ptrauth kernel keys arm64: enable ptrauth earlier arm64: cpufeature: handle conflicts based on capability arm64: cpufeature: Move cpu capability helpers inside C file ...
2020-03-17perf: arm-ccn: Use scnprintf() for robustnessTakashi Iwai
snprintf() is a hard-to-use function, it's especially difficult to use it for concatenating substrings in a buffer with a limited size. Since snprintf() returns the would-be-output size, not the actual size, the subsequent use of snprintf() may point to the incorrect position easily. Although the current code doesn't actually overflow the buffer, it's an incorrect usage. This patch replaces such snprintf() calls with a safer version, scnprintf(). Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-02drivers/perf: arm_pmu_acpi: Fix incorrect checking of gicc pointerluanshi
Fix bogus NULL checks on the return value of acpi_cpu_get_madt_gicc() by checking for a 0 'gicc->performance_interrupt' value instead. Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-02drivers/perf: fsl_imx8_ddr: Correct the CLEAR bit definitionJoakim Zhang
When disabling a counter from ddr_perf_event_stop(), the counter value is reset to 0 at the same time. Preserve the counter value by performing a read-modify-write of the PMU register and clearing only the enable bit. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-03-02perf: arm_spe: Remove unnecessary zero check on 'nr_pages'luanshi
We already check that the 'nr_pages' is > 2, so there's no need to check that it's != 0 later on. Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-02-10perf/smmuv3: Use platform_get_irq_optional() for wired interruptJohn Garry
Even though a SMMUv3 PMCG implementation may use an MSI as the form of interrupt source, the kernel would still complain that it does not find the wired (GSIV) interrupt in this case: root@(none)$ dmesg | grep arm-smmu-v3-pmcg | grep "not found" [ 59.237219] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.8.auto: IRQ index 0 not found [ 59.322841] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.9.auto: IRQ index 0 not found [ 59.422155] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.10.auto: IRQ index 0 not found [ 59.539014] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.11.auto: IRQ index 0 not found [ 59.640329] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.12.auto: IRQ index 0 not found [ 59.743112] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.13.auto: IRQ index 0 not found [ 59.880577] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.14.auto: IRQ index 0 not found [ 60.017528] arm-smmu-v3-pmcg arm-smmu-v3-pmcg.15.auto: IRQ index 0 not found Use platform_get_irq_optional() to silence the warning. If neither interrupt source is found, then the driver will still warn that IRQ setup errored and the probe will fail. Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-15perf/imx_ddr: Fix cpu hotplug state cleanupLeonard Crestez
This driver allocates a dynamic cpu hotplug state but never releases it. If reloaded in a loop it will quickly trigger a WARN message: "No more dynamic states available for CPU hotplug" Fix by calling cpuhp_remove_multi_state on remove like several other perf pmu drivers. Also fix the cleanup logic on probe error paths: add the missing cpuhp_remove_multi_state call and properly check the return value from cpuhp_state_add_instant_nocalls. Fixes: 9a66d36cc7ac ("drivers/perf: imx_ddr: Add DDR performance counter support to perf") Acked-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Will Deacon <will@kernel.org>
2020-01-10drivers/perf: hisi: Simplify hisi_read_sccl_and_ccl_id and its commentShaokun Zhang
hisi_read_sccl_and_ccl_id is not readable and its comment is a little confused, so simplify the function and its comment as Mark's suggestion. Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: John Garry <john.garry@huawei.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-12-18perf/smmuv3: Remove the leftover put_cpu() in error pathHanjun Guo
In smmu_pmu_probe(), there is put_cpu() in the error path, which is wrong because we use raw_smp_processor_id() to get the cpu ID, not get_cpu(), remove it. While we are at it, kill 'out_cpuhp_err' altogether and just return err if we fail to add the hotplug instance. Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-11-07drivers/perf: hisi: update the sccl_id/ccl_id for certain HiSilicon platformShaokun Zhang
For some HiSilicon platform, the originally designed SCCL_ID and CCL_ID are not satisfied with much rich topology when the MT is set, so we extend the SCCL_ID to MPIDR[aff3] and CCL_ID to MPIDR[aff2]. Let's update this for HiSilicon uncore PMU driver. Cc: John Garry <john.garry@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04perf/imx_ddr: Dump AXI ID filter info to userspaceJoakim Zhang
caps/filter indicates whether HW supports AXI ID filter or not. caps/enhanced_filter indicates whether HW supports enhanced AXI ID filter or not. Users can check filter features from userspace with these attributions. Suggested-by: Will Deacon <will@kernel.org> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> [will: reworked cap switch to be less error-prone] Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04perf/imx_ddr: Add driver for DDR PMU in i.MX8MPlusJoakim Zhang
Add driver for DDR PMU in i.MX8MPlus. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-11-04perf/imx_ddr: Add enhanced AXI ID filter supportJoakim Zhang
With DDR_CAP_AXI_ID_FILTER quirk, indicating HW supports AXI ID filter which only can get bursts from DDR transaction, i.e. DDR read/write requests. This patch add DDR_CAP_AXI_ID_ENHANCED_FILTER quirk, indicating HW supports AXI ID filter which can get bursts and bytes from DDR transaction at the same time. We hope PMU always return bytes in the driver due to it is more meaningful for users. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-10-29drivers/perf: Add CCPI2 PMU support in ThunderX2 UNCORE driver.Ganapatrao Prabhakerrao Kulkarni
CCPI2 is a low-latency high-bandwidth serial interface for inter socket connectivity of ThunderX2 processors. CCPI2 PMU supports up to 8 counters per socket. Counters are independently programmable to different events and can be started and stopped individually. The CCPI2 counters are 64-bit and do not overflow in normal operation. Signed-off-by: Ganapatrao Prabhakerrao Kulkarni <gkulkarni@marvell.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-10-28perf: arm-ccn: Enable stats for CCN-512 interconnectMarek Bykowski
Add compatible string for the ARM CCN-512 interconnect Acked-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Marek Bykowski <marek.bykowski@gmail.com> Signed-off-by: Boleslaw Malecki <boleslaw.malecki@tieto.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-10-01perf/smmuv3: use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-10-01perf/arm-cci: use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-10-01perf/arm-ccn: use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-10-01perf: xgene: use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-10-01perf: hisi: use devm_platform_ioremap_resource() to simplify codeYueHaibing
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-30Merge branches 'for-next/52-bit-kva', 'for-next/cpu-topology', ↵Will Deacon
'for-next/error-injection', 'for-next/perf', 'for-next/psci-cpuidle', 'for-next/rng', 'for-next/smpboot', 'for-next/tbi' and 'for-next/tlbi' into for-next/core * for-next/52-bit-kva: (25 commits) Support for 52-bit virtual addressing in kernel space * for-next/cpu-topology: (9 commits) Move CPU topology parsing into core code and add support for ACPI 6.3 * for-next/error-injection: (2 commits) Support for function error injection via kprobes * for-next/perf: (8 commits) Support for i.MX8 DDR PMU and proper SMMUv3 group validation * for-next/psci-cpuidle: (7 commits) Move PSCI idle code into a new CPUidle driver * for-next/rng: (4 commits) Support for 'rng-seed' property being passed in the devicetree * for-next/smpboot: (3 commits) Reduce fragility of secondary CPU bringup in debug configurations * for-next/tbi: (10 commits) Introduce new syscall ABI with relaxed requirements for pointer tags * for-next/tlbi: (6 commits) Handle spurious page faults arising from kernel space
2019-08-28perf/imx_ddr: Add support for AXI ID filteringJoakim Zhang
AXI filtering is used by events 0x41 and 0x42 to count reads or writes with an ARID or AWID matching a specified filter. The filter is exposed to userspace as an (ID, MASK) pair, where each set bit in the mask causes the corresponding bit in the ID to be ignored when matching against the ID of memory transactions for the purposes of incrementing the counter. For example: # perf stat -a -e imx8_ddr0/axid-read,axi_mask=0xff,axi_id=0x800/ cmd will count all read transactions from AXI IDs 0x800 - 0x8ff. If the 'axi_mask' is omitted, then it is treated as 0x0 which means that the 'axi_id' will be matched exactly. Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-27perf/smmuv3: Validate groups for global filteringRobin Murphy
With global filtering, it becomes possible for users to construct self-contradictory groups with conflicting filters. Make sure we cover that when initially validating events. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-08-27perf/smmuv3: Validate group sizeRobin Murphy
Ensure that a group will actually fit into the available counters. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-07-31perf: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: Will Deacon <will@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Will Deacon <will@kernel.org>
2019-07-31perf/imx_ddr: Add MODULE_DEVICE_TABLELeonard Crestez
This is required for automatic probing when driver is built as a module. Fixes: 9a66d36cc7ac ("drivers/perf: imx_ddr: Add DDR performance counter support to perf") Acked-by: Frank Li <frank.li@nxp.com> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-07-29drivers/perf: arm_pmu: Fix failure path in PM notifierWill Deacon
Handling of the CPU_PM_ENTER_FAILED transition in the Arm PMU PM notifier code incorrectly skips restoration of the counters. Fix the logic so that CPU_PM_ENTER_FAILED follows the same path as CPU_PM_EXIT. Cc: <stable@vger.kernel.org> Fixes: da4e4f18afe0f372 ("drivers/perf: arm_pmu: implement CPU_PM notifier") Reported-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-07-15docs: perf: move to the admin-guideMauro Carvalho Chehab
The perf infrastructure is used for userspace to track issues. At least a good part of what's described here is related to it. So, add it to the admin-guide. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15docs: perf: convert to ReSTMauro Carvalho Chehab
Rename the perf documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-08Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP} - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to manage the permissions of executable vmalloc regions more strictly - Slight performance improvement by keeping softirqs enabled while touching the FPSIMD/SVE state (kernel_neon_begin/end) - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG and AXFLAG instructions for floating point comparison flags manipulation) and FRINT (rounding floating point numbers to integers) - Re-instate ARM64_PSEUDO_NMI support which was previously marked as BROKEN due to some bugs (now fixed) - Improve parking of stopped CPUs and implement an arm64-specific panic_smp_self_stop() to avoid warning on not being able to stop secondary CPUs during panic - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI platforms - perf: DDR performance monitor support for iMX8QXP - cache_line_size() can now be set from DT or ACPI/PPTT if provided to cope with a system cache info not exposed via the CPUID registers - Avoid warning on hardware cache line size greater than ARCH_DMA_MINALIGN if the system is fully coherent - arm64 do_page_fault() and hugetlb cleanups - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep) - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags' introduced in 5.1) - CONFIG_RANDOMIZE_BASE now enabled in defconfig - Allow the selection of ARM64_MODULE_PLTS, currently only done via RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill over into the vmalloc area - Make ZONE_DMA32 configurable * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) perf: arm_spe: Enable ACPI/Platform automatic module loading arm_pmu: acpi: spe: Add initial MADT/SPE probing ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens ACPI/PPTT: Modify node flag detection to find last IDENTICAL x86/entry: Simplify _TIF_SYSCALL_EMU handling arm64: rename dump_instr as dump_kernel_instr arm64/mm: Drop [PTE|PMD]_TYPE_FAULT arm64: Implement panic_smp_self_stop() arm64: Improve parking of stopped CPUs arm64: Expose FRINT capabilities to userspace arm64: Expose ARMv8.5 CondM capability to userspace arm64: defconfig: enable CONFIG_RANDOMIZE_BASE arm64: ARM64_MODULES_PLTS must depend on MODULES arm64: bpf: do not allocate executable memory arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP arm64: module: create module allocations without exec permissions arm64: Allow user selection of ARM64_MODULE_PLTS acpi/arm64: ignore 5.1 FADTs that are reported as 5.0 arm64: Allow selecting Pseudo-NMI again ...
2019-06-27perf: arm_spe: Enable ACPI/Platform automatic module loadingJeremy Linton
Lets add the MODULE_TABLE and platform id_table entries so that the SPE driver can attach to the ACPI platform device created by the core pmu code. Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-06-27arm_pmu: acpi: spe: Add initial MADT/SPE probingJeremy Linton
ACPI 6.3 adds additional fields to the MADT GICC structure to describe SPE PPI's. We pick these out of the cached reference to the madt_gicc structure similarly to the core PMU code. We then create a platform device referring to the IRQ and let the user/module loader decide whether to load the SPE driver. Tested-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 503 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Enrico Weigelt <info@metux.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-13drivers/perf: imx_ddr: Add DDR performance counter support to perfFrank Li
Add DDR performance monitor support for iMX8QXP. The PMU consists of 3 programmable event counters and a single dedicated cycle counter. Example usage: $ perf stat -a -e \ imx8_ddr0/read-cycles/,imx8_ddr0/write-cycles/,imx8_ddr0/precharge/ ls - or - $ perf stat -a -e \ imx8_ddr0/cycles/,imx8_ddr0/read-access/,imx8_ddr0/write-access/ ls Other events are supported, and advertised via perf list. Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> [will: rewrote commit message/kconfig and used #defines for dev/cpuhp names] Signed-off-by: Will Deacon <will.deacon@arm.com>