summaryrefslogtreecommitdiff
path: root/drivers/pcmcia/ds.c
AgeCommit message (Collapse)Author
2010-02-17pcmcia: protect s->device_countDominik Brodowski
Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-02-17pcmcia: also lock fake and cache CIS by ops_mutexDominik Brodowski
Specifically, struct list_head cis_cache; size_t fake_cis_len; u8 *fake_cis; are protected. Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-02-17pcmcia: move cistpl.c into pcmcia moduleDominik Brodowski
As PCMCIA is the only real user of CIS access functions, include cistpl.c in the PCMCIA module, not in the PCMCIA & CardBus core module. Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-01-17pcmcia: call CIS cleanup from ds.cDominik Brodowski
As ds.c is the only real user of CIS access functions, call the cleanup functions from ds.c, too. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-01-17pcmcia: improve check for same card in slot after resumeDominik Brodowski
During a suspend/resume cycle, an user may change the card in the PCMCIA/CardBus slot. The pcmcia_core can at least look at the socket state to check whether it is the same. For PCMCIA devices, move the detection and handling of such a change to ds.c. For CardBus devices, the PCI hotplug interface doesn't offer a "rescan" facility which also _removes_ devices no longer to be found behind a bridge. Therefore, remove and re-add all devices unconditionally. CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-01-17pcmcia: make use of pcmcia_dev_resume() return valueDominik Brodowski
In runtime_resume(), do not throw away the return value of pcmcia_dev_resume(), for we can use it (at least) in pcmcia_store_pm_state(). This also fixes the pointless assignment previosly seen there, as noted by Dan Carpenter. CC: Dan Carpenter <error27@gmail.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-12-07pcmcia: CodingStyle fixesDominik Brodowski
Fix several CodingStyle issues in drivers/pcmcia/ . checkpatch.pl no longer reports errors in the PCMCIA core. The remaining warnings mostly relate to wrong indent -- PCMCIA historically used 4 spaces --, to lines over 80 characters and to hundreds of typedefs. The cleanup of those will follow in the future. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-09pcmcia: remove now-defunct cs_error, pcmcia_error_{func,ret}Dominik Brodowski
As all in-tree drivers have been converted to not use cs_error() any more, drop these functions and definitions, and update the Documentation. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-11-08pcmcia: use dynamic debug instead of custom infrastructureDominik Brodowski
Use the generic "dynamic debug" infrastructure instead of CONIG_PCMCIA_DEBUG in the PCMCIA core (pcmcia.ko and pcmcia_core.ko). To enable debugging, enable CONFIG_DYNAMIC_DEBUG, mount debugfs and $ echo -n 'module pcmcia_core +p' > /sys/kernel/debug/dynamic_debug/control for the complete module "pcmcia_core", for example. For more detailled instructions, please see Documentation/dynamic-debug-howto.txt Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-19pcmcia: do not try to store more than 4 version stringsDominik Brodowski
... for struct pcmcia_device only provides for 4 anyway. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-19pcmcia: pccard_read_tuple and TUPLE_RETURN_COMMON cleanupDominik Brodowski
pccard_read_tuple(), which is only used by the PCMCIA core, should handle TUPLE_RETURN_COMMON more sensibly: If a specific function (which may be 0) is requested, set tuple.Attributes = 0 as was done in all PCMCIA drivers. If, however, BIND_FN_ALL is requested, return the "common" tuple. As to the callers of pccard_read_tuple(): - All calls to pcmcia_validate_cis() had set the "function" parameter to BIND_FN_ALL. Therefore, remove the "function" parameter and make the parameter to pccard_read_tuple explicit. - Calls to CISTPL_VERS_1 and CISTPL_MANFID now set BIND_FN_ALL. This was already the case for calls to CISTPL_LONGLINK_MFC. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-09-15pcmcia: fix incorrect argument order to list_add_tail()Wolfram Sang
Commit a56bc69a182f501582557af7fad5bc882b1c856c fixed a wrong usage of list_add_tail() within store_new_id() for PCI. Port the fix to PCMCIA, which adapted this function from PCI. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15pcmcia: remove driver_data direct access of struct deviceGreg Kroah-Hartman
In the near future, the driver core is going to not allow direct access to the driver_data pointer in struct device. Instead, the functions dev_get_drvdata() and dev_set_drvdata() should be used. These functions have been around since the beginning, so are backwards compatible with all older kernel versions. Cc: linux-pcmcia@lists.infradead.org Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-15firmware: pcmcia/ds: prepare for FIRMWARE_NAME_MAX removalSamuel Ortiz
We're going to remove the FIRMWARE_NAME_MAX definition in order to avoid any firmware name length restriction. With the FIRMWARE_NAME_MAX removal, the ds.c reference becomes useless as we dont need to check for the firmware name length anymore. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-02pcmcia: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-11-02pcmcia: setup resource information for pseudo multifunction devices.Komuro
Setup "io" and "irq" for pseudo multifunction devices. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits) pcmcia: ioctl-internal definitions pcmcia: cistpl header cleanup pcmcia: remove unused argument to pcmcia_parse_tuple() pcmcia: card services header cleanup pcmcia: device_id header cleanup pcmcia: encapsulate ioaddr_t pcmcia: cleanup device driver header file pcmcia: cleanup socket services header file pcmcia: merge ds_internal.h into cs_internal.h pcmcia: cleanup cs_internal.h pcmcia: cs_internal.h is internal pcmcia: use dev_printk for cs_error() pcmcia: remove CS_ error codes alltogether pcmcia: deprecate CS_BAD_TUPLE pcmcia: deprecate CS_BAD_ARGS pcmcia: deprecate CS_BAD_BASE, CS_BAD_IRQ, CS_BAD_OFFSET and CS_BAD_SIZE pcmcia: deprecate CS_BAD_ATTRIBUTE, CS_BAD_TYPE and CS_BAD_PAGE pcmcia: deprecate CS_NO_MORE_ITEMS pcmcia: deprecate CS_IN_USE pcmcia: deprecate CS_CONFIGURATION_LOCKED ... Fix trivial conflict in drivers/pcmcia/ds.c manually
2008-09-22pcmcia: Fix broken abuse of dev->driver_dataAlan Cox
PCMCIA abuses dev->private_data in the probe methods. Unfortunately it continues to abuse it after calling drv->probe() which leads to crashes and other nasties (such as bogus probes of multifunction devices) giving errors like pcmcia: registering new device pcmcia0.1 kernel: 0.1: GetNextTuple: No more items Extract the passed data before calling the driver probe function that way we don't blow up when the driver reuses dev->private_data as its right. As its close to the final release just move the hack so it works out, hopefully someone will be sufficiently embarrassed to produce a nice rework for 2.6.28. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-25pcmcia: merge ds_internal.h into cs_internal.hDominik Brodowski
Merge ds_internal.c into cs_internal.h. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: use dev_printk for cs_error()Dominik Brodowski
Use dev_printk() in cs_error()-based error reporting. While this function-turned-macro will hopefully go away soon, using dev_printk simplifies the code much. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: deprecate CS_BAD_TUPLEDominik Brodowski
CS_BAD_TUPLE was used to denote a bad tuple being passed to the parse function. Therefore, replace it with -EINVAL and a verbose message. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: deprecate CS_BAD_ARGSDominik Brodowski
CS_BAD_ARGS mean a badly written driver or invalid userspace ioctl access, so translate that to -EINVAL. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: deprecate CS_BAD_BASE, CS_BAD_IRQ, CS_BAD_OFFSET and CS_BAD_SIZEDominik Brodowski
These four error values mostly mean a badly written driver, so ds_dbg() output and -EINVAL seems to be enough. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: deprecate CS_BAD_ATTRIBUTE, CS_BAD_TYPE and CS_BAD_PAGEDominik Brodowski
CS_BAD_TYPE was only used in cs.c and already properly annotated by error messages. CS_BAD_ATTRIBUTE and CS_BAD_PAGE mean a badly written driver, so ds_dbg() output and -EINVAL seems to be enough. (includes bugfix from and Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> ) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: deprecate CS_NO_MORE_ITEMSDominik Brodowski
CS_NO_MORE_ITEMS is returned by the CIS tuple reading and parsing code if the end of a tuple chain is reached. As at least one PCMCIA driver relies on matching this return value, replace it with -ENOSPC which is now uniquely used for this purpose within the in-kernel pcmcia subsystem. CC: Russell King <rmk+kernel@arm.linux.org.uk> CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: deprecate CS_CONFIGURATION_LOCKEDDominik Brodowski
This error code meant that trying to change the configuration after the initialization phase is forbidden. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: deprecate CS_BAD_HANDLEDominik Brodowski
CS_BAD_HANDLE means that something went badly wrong: no parameter was passed, or the paramater passed wasn't the correct one. Therefore, replace it with -EINVAL. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: deprecate CS_GENERAL_FAILUREDominik Brodowski
It's only used by pcmcia_core when socket-related queries time out. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: deprecate CS_NO_CARDDominik Brodowski
It means that no card can be detected in the socket, so return -ENODEV Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: deprecate CS_BAD_VCC and CS_BAD_VPPDominik Brodowski
They were either used to report that changing voltage is not allowed, or that changing voltage failed. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: deprecate CS_UNSUPPORTED_*Dominik Brodowski
CS_UNSUPPORTED_MODE and CS_UNSUPPORTED_FUNCTION were mostly used to denote trying to use PCMCIA functions on CardBus cards. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: deprecate unused CS_ error codesDominik Brodowski
Deprecate unused CS_ error codes by replacing their definitions with generic error messages, and removing them from the error_t lookup table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23pcmcia: deprecate CS_SUCCESSDominik Brodowski
Instead of using own error or success codes, the PCMCIA code should rely on the generic return values. Therefore, replace all occurrences of CS_SUCCESS with 0. CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-23Merge branches 'pcmcia-config-loop' and 'pcmcia-printk' into pcmciaDominik Brodowski
* pcmcia-config-loop: pcmcia: pcmcia_config_loop() improvement by passing vcc pcmcia: pcmcia_config_loop() default CIS entry handling pcmcia: pcmcia_config_loop() ConfigIndex unification pcmcia: use pcmcia_loop_config in misc pcmcia drivers pcmcia: use pcmcia_loop_config in net pcmcia drivers pcmcia: use pcmcia_loop_config in ISDN pcmcia drivers pcmcia: use pcmcia_loop_config in scsi pcmcia drivers pcmcia: use pcmcia_loop_config in bluetooth drivers pcmcia: use pcmcia_loop_config in pata and ide drivers pcmcia: add pcmcia_loop_config() helper * pcmcia-printk: pcmcia: don't add extra DEBUG cflag pcmcia: remove unused cs_socket_name() definition pcmcia: use dev_printk in module rsrc_nonstatic pcmcia: use dev_printk in module pcmcia pcmcia: use dev_printk in module pcmcia_core pcmcia: use dev_printk and dev_dbg in yenta_socket
2008-08-23pcmcia: don't add extra DEBUG cflagDominik Brodowski
Use CONFIG_PCMCIA_DEBUG instead of DEBUG so that dev_dbg() and other tricks work properly. (includes bugfixes from and Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> ) Signed-off-by: Dominik Broodwski <linux@dominikbrodowski.net>
2008-08-23pcmcia: use dev_printk in module pcmciaDominik Brodowski
(includes bugfix from and Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> ) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02pcmcia: only copy CIS override data onceDominik Brodowski
Instead of copying CIS override data in socket_sysfs.c or ds.c, and then again in cistpl.c, only do so once. Also, cisdump_t is now only used by the deprecated ioctl. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-06-24pcmcia: allow for longer CIS firmware filesDominik Brodowski
Don't be more zealous with memory than the firmware class core. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-06-24pcmcia: kill IN_CARD_SERVICESAdrian Bunk
IN_CARD_SERVICES was #define'd but not used, so let's remove it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-06-24pcmcia: simplify pccard_validate_cisDominik Brodowski
As cisinfo_t only contains one unsigned_int, pccard_validate_cis can be simplified by passing that around directly. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-05-01pcmcia: silence section mismatch warnings from class_interface variablesSam Ravnborg
Silence the following warnings: WARNING: drivers/pcmcia/built-in.o(.data+0x6e8): Section mismatch in reference from the variable pcmcia_bus_interface to the function .devinit.text:pcmcia_bus_add_socket() WARNING: drivers/pcmcia/built-in.o(.data+0xa88): Section mismatch in reference from the variable pccard_rsrc_interface to the function .devinit.text:pccard_sysfs_add_rsrc() WARNING: drivers/pcmcia/built-in.o(.data+0xa90): Section mismatch in reference from the variable pccard_rsrc_interface to the function .devexit.text:pccard_sysfs_remove_rsrc() The variables of type class_interface contains references to __devinit and __devexit functions which is OK. Silence warnings by annotating the variables with __refdata. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05pcmcia: include bad CIS filename in error messageRandy Dunlap
- Print the invalid CIS filename in the invalid filename message. - Use sizeof() instead of hard-coded constant for buffer size. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05pcmcia: stop updating dev->power.power_stateDavid Brownell
This stops the pcmcia core from using dev->power.power_state; that field is deprecated (overdue for removal) and the only reason to update it was to make the /sys/devices/.../power/state files (now removed) work better. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-24PCMCIA: use proper call to driver_create_fileGreg Kroah-Hartman
Don't try to call the "raw" sysfs_create_file when we already have a helper function to do this kind of work for us. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-10pcmcia: fix kernel-doc commentsRandy Dunlap
Fix kernel-doc comments in drivers/pcmcia/: - ti113x.h does not contain kernel-doc, so don't use /** to begin a doc comment - yenta_socket.c: remove /** on non-kernel-doc comments; escape the ':' in an "http:" comment so that it won't be treated as a section heading; - cs.c: remove /** on non-kernel-doc comments & add function parameter info - ds.c: fix function parameter info Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-16pcmcia: use DMA_MASK_NONE for the default for all pcmcia devicesJames Bottomley
Most non cardbus devices can't do dma, so flag them as such in the device creation routine. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Tejun Heo <htejun@gmail.com> Cc: Natalie Protasevich <protasnb@gmail.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12Driver core: change add_uevent_var to use a structKay Sievers
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18PM: remove deprecated dpm_runtime_* routinesAlan Stern
This patch (as933) removes the deprecated dpm_runtime_suspend() and dpm_runtime_resume() routines from the PM core. The only user of those routines is the PCMCIA ds driver; local replacements are added. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-07add new_id to PCMCIA driversBernhard Walle
PCI drivers have the new_id file in sysfs which allows new IDs to be added at runtime. The advantage is to avoid re-compilation of a driver that works for a new device, but it's ID table doesn't contain the new device. This mechanism is only meant for testing, after the driver has been tested successfully, the ID should be added in source code so that new revisions of the kernel automatically detect the device. The implementation follows the PCI implementation. The interface is documented in Documentation/pcmcia/driver.txt. Computations should be done in userspace, so the sysfs string contains the raw structure members for matching. Signed-off-by: Bernhard Walle <bwalle@suse.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-07Driver core: convert pcmcia code to use struct deviceGreg Kroah-Hartman
Converts from using struct "class_device" to "struct device" making everything show up properly in /sys/devices/ with symlinks from the /sys/class directory. Cc: <linux-pcmcia@lists.infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 06:32:48 +0000