summaryrefslogtreecommitdiff
path: root/drivers/pci/quirks.c
AgeCommit message (Collapse)Author
2010-05-18PCI quirks: disable msi on AMD rs4xx internal gfx bridgesAlex Deucher
Doesn't work reliably for internal gfx. Fixes kernel bug https://bugzilla.kernel.org/show_bug.cgi?id=15626. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: Stable <stable@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-05-18PCI: Disable MSI for MCP55 on P5N32-E SLIBen Hutchings
As reported in <http://bugs.debian.org/552299>, MSI appears to be broken for this on-board device. We already have a quirk for the P5N32-SLI Premium; extend it to cover both variants of the board. Reported-by: Romain DEGEZ <romain.degez@smartjog.com> Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-04-02PCI quirk: RS780/RS880: disable MSI behind the PCI bridgeClemens Ladisch
The missing initialization of the nb_cntl.strap_msi_enable does not seem to be the only problem that prevents MSI, so that quirk is not sufficient to enable MSI on all machines. To be safe, disable MSI unconditionally for the internal graphics and HDMI audio on these chipsets. [rjw: Added the PCI_VENDOR_ID_AI quirk.] Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-25PCI: don't say we claimed a resource if we failedBjorn Helgaas
pci_claim_resource() can fail, so pay attention and only claim success when it actually succeeded. If pci_claim_resource() fails, it prints a useful diagnostic. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-25PCI quirk: Disable MSI on VIA K8T890 systemsMatthew Wilcox
Bugzilla 15287 indicates that there's a problem with Message Signalled Interrupts on VIA K8T890 systems. Add a quirk to disable MSI on these systems. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Tested-by: Jan Kreuzer <kontrollator@gmx.de> Tested-by: lh <jarryson@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24PCI quirk: RS780/RS880: work around missing MSI initializationClemens Ladisch
AMD says in section 2.5.4 (GFX MSI Enable) of #43291 (AMD 780G Family Register Programming Requirements): The SBIOS must enable internal graphics MSI capability in GCCFG by setting the following: NBCFG.NB_CNTL.STRAP_MSI_ENABLE='1' Quite a few BIOS writers misinterpret this sentence and think that enabling MSI is an optional feature. However, clearing that bit just prevents delivery of MSI messages but does not remove the MSI PCI capabilities registers, and so leaves these devices unusable for any driver that attempts to use MSI. Setting that bit is not possible after the BIOS has locked down the configuration registers, so we have to manually disable MSI for the affected devices. This fixes the codec communication errors in the HDA driver when accessing the HDMI audio device, and allows us to get rid of the overcautious quirk in radeon_irq_kms.c. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Tested-by: Alex Deucher <alexdeucher@gamil.com> Cc: <stable@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24PCI quirk: only apply CX700 PCI bus parking quirk if external VT6212L is presentTim Yamin
Apply the CX700 quirk only when an external VT6212L is present (which is the case for the errant hardware the quirk was written for), don't touch the settings otherwise -- Hauppage PVR-500 tuners need PCI Bus Parking in order to work and when that's turned on everything seems to behave fine. I guess the underlying problem is a combination of an external VT6212L and the CX700 rather than the CX700's PCI being broken completely for all cases... Reported-by: Jeroen Roos <jeroen@roosnl.com> Signed-off-by: Tim Yamin <plasm@roo.me.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-06ricoh_mmc: port from driver to pci quirkMaxim Levitsky
This patch solves nasty problem original driver has. Original goal of the ricoh_mmc was to disable this device because then, mmc cards can be read using standard SDHCI controller, thus avoiding writing of yet another driver. However, the act of disablement, makes other pci functions that belong to this controller (xD and memstick) shift up one level, thus pci core has now wrong idea about these devices. To fix this issue, this patch moves the driver into the pci quirk section, thus it is executes before the pci is enumerated, and therefore solving that issue, also same sequence of commands is performed on resume for same reasons. Also regardless of the above, this way is cleaner. You still need to set CONFIG_MMC_RICOH_MMC to enable this quirk Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Acked-by: Philip Langdale <philipl@overt.org> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-28Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/firmware/iscsi_ibft.c
2010-02-22PCI: Clean up build for CONFIG_PCI_QUIRKS unsetRafael J. Wysocki
Currently, drivers/pci/quirks.c is built unconditionally, but if CONFIG_PCI_QUIRKS is unset, the only things actually built in this file are definitions of global variables and empty functions (due to the #ifdef CONFIG_PCI_QUIRKS embracing all of the code inside the file). This is not particularly nice and if someone overlooks the #ifdef CONFIG_PCI_QUIRKS, build errors are introduced. To clean that up, move the definitions of the global variables in quirks.c that are always built to pci.c, move the definitions of the empty functions (compiled when CONFIG_PCI_QUIRKS is unset) to headers (additionally make these functions static inline) and modify drivers/pci/Makefile so that quirks.c is only built if CONFIG_PCI_QUIRKS is set. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22pci: add support for 82576NS serdes to existing SR-IOV quirkAlexander Duyck
This patch adds support for the 82576NS Serdes adapter to the existing pci quirk for 82576 parts. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-05CS5536: apply pci quirk for BIOS SMBUS bugAndres Salomon
The new cs5535-* drivers use PCI header config info rather than MSRs to determine the memory region to use for things like GPIOs and MFGPTs. As anticipated, we've run into a buggy BIOS: [ 0.081818] pci 0000:00:14.0: reg 10: [io 0x6000-0x7fff] [ 0.081906] pci 0000:00:14.0: reg 14: [io 0x6100-0x61ff] [ 0.082015] pci 0000:00:14.0: reg 18: [io 0x6200-0x63ff] [ 0.082917] pci 0000:00:14.2: reg 20: [io 0xe000-0xe00f] [ 0.083551] pci 0000:00:15.0: reg 10: [mem 0xa0010000-0xa0010fff] [ 0.084436] pci 0000:00:15.1: reg 10: [mem 0xa0011000-0xa0011fff] [ 0.088816] PCI: pci_cache_line_size set to 32 bytes [ 0.088938] pci 0000:00:14.0: address space collision: [io 0x6100-0x61ff] already in use [ 0.089052] pci 0000:00:14.0: can't reserve [io 0x6100-0x61ff] This is a Soekris board, and its BIOS sets the size of the PCI ISA bridge device's BAR0 to 8k. In reality, it should be 8 bytes (BAR0 is used for SMBus stuff). This quirk checks for an incorrect size, and resets it accordingly. Signed-off-by: Andres Salomon <dilinger@collabora.co.uk> Tested-by: Leigh Porter <leigh@leighporter.org> Tested-by: Jens Rottmann <JRottmann@LiPPERTEmbedded.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-31pci: avoid compiler warning in quirks.cLinus Torvalds
Introduced by commit 5b889bf23 ("PCI: Fix build if quirks are not enabled"), which made the pci_dev_reset_methods[] array static and 'const', but didn't then change the code to match, and use a const pointer when moving it to quirks.c. Trivially fixed by just adding the required 'const' to the iterator variable. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-31PCI: Fix build if quirks are not enabledRafael J. Wysocki
After commit b9c3b266411d27f1a6466c19d146d08db576bfea ("PCI: support device-specific reset methods") the kernel build is broken if CONFIG_PCI_QUIRKS is unset. Fix this by moving pci_dev_specific_reset() to drivers/pci/quirks.c and providing an empty replacement for !CONFIG_PCI_QUIRKS builds. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16PCI: add Intel 82599 Virtual Function specific reset methodDexuan Cui
Handle device specific timeout and use FLR. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Dexuan Cui <dexuan.cui@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-16PCI: add Intel USB specific reset methodDexuan Cui
Handle device specific reset requirements (i.e. vendor reg for reset along with appropriate timeout). Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Dexuan Cui <dexuan.cui@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-16PCI: support device-specific reset methodsDexuan Cui
Add a new type of quirk for resetting devices at pci_dev_reset time. This is necessary to handle device with nonstandard reset procedures, especially useful for guest drivers. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Dexuan Cui <dexuan.cui@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-12-16PCI: Handle case when no pci device can provide cache line size hintCsaba Henk
Prior to this patch, if pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, ...) returns 0 for all dev, pci_cache_line_size ends up set to zero (instead of pci_dfl_cache_line_size). This patch ensures the pci_cache_line_size = pci_dfl_cache_line_size setting in the above scenario. This happens in case of a kvm-88 guest (where, consequently, the rtl8139 NIC failed to initialize). Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Csaba Henk <csaba@gluster.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04vsprintf: use %pR, %pr instead of %pRt, %pRfBjorn Helgaas
Jesse accidentally applied v1 [1] of the patchset instead of v2 [2]. This is the diff between v1 and v2. The changes in this patch are: - tidied vsprintf stack buffer to shrink and compute size more accurately - use %pR for decoding and %pr for "raw" (with type and flags) instead of adding %pRt and %pRf [1] http://lkml.org/lkml/2009/10/6/491 [2] http://lkml.org/lkml/2009/10/13/441 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04PCI: avoid boot interrupt quirk for AMD 813x B1 devicesStefan Assmann
AMD 813x rev. B1 (like rev. B2) devices generate no interrupts if quirk_disable_amd_813x_boot_interrupt is executed, add an exception. http://bugzilla.kernel.org/show_bug.cgi?id=14159 Patch also adds missing cases for DECLARE_PCI_FIXUP_RESUME and DECLARE_PCI_FIXUP_FINAL calls to quirk_disable_amd_813x_boot_interrupt. Signed-off-by: Stefan Assmann <sassmann@redhat.com> Tested-by: Gabriele Giorgetti <g.giorgetti@teamsystem.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-11-04PCI: determine CLS more intelligentlyJesse Barnes
Till now, CLS has been determined either by arch code or as L1_CACHE_BYTES. Only x86 and ia64 set CLS explicitly and x86 doesn't always get it right. On most configurations, the chance is that firmware configures the correct value during boot. This patch makes pci_init() determine CLS by looking at what firmware has configured. It scans all devices and if all non-zero values agree, the value is used. If none is configured or there is a disagreement, pci_dfl_cache_line_size is used. arch can set the dfl value (via PCI_CACHE_LINE_BYTES or pci_dfl_cache_line_size) or override the actual one. ia64, x86 and sparc64 updated to set the default cls instead of the actual one. While at it, declare pci_cache_line_size and pci_dfl_cache_line_size in pci.h and drop private declarations from arch code. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David Miller <davem@davemloft.net> Acked-by: Greg KH <gregkh@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-10-16ahci / atiixp / pci quirks: rename AMD SB900 into Hudson-2Shane Huang
This patch renames the code name SB900 into Hudson-2 Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-13Merge git://git.infradead.org/~dwmw2/iommu-2.6.32Linus Torvalds
* git://git.infradead.org/~dwmw2/iommu-2.6.32: x86: Move pci_iommu_init to rootfs_initcall() Run pci_apply_final_quirks() sooner. Mark pci_apply_final_quirks() __init rather than __devinit Rename pci_init() to pci_apply_final_quirks(), move it to quirks.c intel-iommu: Yet another BIOS workaround: Isoch DMAR unit with no TLB space intel-iommu: Decode (and ignore) RHSA entries intel-iommu: Make "Unknown DMAR structure" message more informative
2009-10-12Run pci_apply_final_quirks() sooner.David Woodhouse
Having this as a device_initcall() means that some real device drivers can actually initialise _before_ the quirks are run, which is wrong. We want it to run _before_ device_initcall(), but _after_ fs_initcall(), since some arch-specific PCI initialisation like pcibios_assign_resources() is done at fs_initcall(). We could use rootfs_initcall() but I actually want to use that for the IOMMU initialisation, which has to come after the quirks, but still before the real devices. So use fs_initcall_sync() instead -- since this is entirely synchronous, it doesn't hurt that it'll escape the synchronisation. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-10-12Mark pci_apply_final_quirks() __init rather than __devinitDavid Woodhouse
It doesn't get invoked on hotplug; it can be thrown away after init. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-10-12Rename pci_init() to pci_apply_final_quirks(), move it to quirks.cDavid Woodhouse
This function may have done more in the past, but all it does now is apply the PCI_FIXUP_FINAL quirks. So name it sensibly and put it where it belongs. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-10-07PCI quirk: TI XIO200a erroneously reports support for fast b2b transfersGabe Black
This quirk will disable fast back to back transfer on the secondary bus segment of the TI Bridge. Signed-off-by: Gabe Black <gabe.black@ni.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-16Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (75 commits) PCI hotplug: clean up acpi_run_hpp() PCI hotplug: acpiphp: use generic pci_configure_slot() PCI hotplug: shpchp: use generic pci_configure_slot() PCI hotplug: pciehp: use generic pci_configure_slot() PCI hotplug: add pci_configure_slot() PCI hotplug: clean up acpi_get_hp_params_from_firmware() interface PCI hotplug: acpiphp: don't cache hotplug_params in acpiphp_bridge PCI hotplug: acpiphp: remove superfluous _HPP/_HPX evaluation PCI: Clear saved_state after the state has been restored PCI PM: Return error codes from pci_pm_resume() PCI: use dev_printk in quirk messages PCI / PCIe portdrv: Fix pcie_portdrv_slot_reset() PCI Hotplug: convert acpi_pci_detect_ejectable() to take an acpi_handle PCI Hotplug: acpiphp: find bridges the easy way PCI: pcie portdrv: remove unused variable PCI / ACPI PM: Propagate wake-up enable for devices w/o ACPI support ACPI PM: Replace wakeup.prepared with reference counter PCI PM: Introduce device flag wakeup_prepared PCI / ACPI PM: Rework some debug messages PCI PM: Simplify PCI wake-up code ... Fixed up conflict in arch/powerpc/kernel/pci_64.c due to OF device tree scanning having been moved and merged for the 32- and 64-bit cases. The 'needs_freset' initialization added in 6e19314cc ("PCI/powerpc: support PCIe fundamental reset") is now in arch/powerpc/kernel/pci_of_scan.c.
2009-09-14PCI: use dev_printk in quirk messagesBjorn Helgaas
Convert quirk printks to dev_printk(). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: Olaf Dabrunz <od@suse.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-11ahci: Add AMD SB900 SATA/IDE controller device IDsShane Huang
Add AMD SB900 SATA/IDE controller device IDs. Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-09PCI: Simplify hotplug mch quirk.Eric W. Biederman
There is a very old quirk for the intel E7502 E7320 and E7525 memory controller hubs that disables usage of msi interrupts on pcie hotplug bridges of those devices, and disables changing the affinity of irqs. Today all we have to do to disable msi on a specific device is to set dev->no_msi, which is much more straightforward than the previous logic. The re-running of this fixup after pci hotplug happens below these devices is totally bogus. All of the state we change is pure software state and we don't change the hardware at all. Which means hotplug on the lower devices doesn't have a chance to change this state. So we can safely remove the special case from the pciehp driver and the pcie portdriver. I suspect the special case was someone's expermental debug code that slipped in. Certainly it isn't mentioned in commit 6fb8880a61510295aece04a542767161f624dffe aka BKrev: 41966101LJ_ogfOU0m2aE6teZfQnuQ where the code first appears. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09PCI quirk: update 82576 device ids in SR-IOV quirks listAlexander Duyck
This patch adds the most recent additions to the list of 82576 device IDs to the list of devices needing the SR-IOV quirk. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09PCI: apply nv_msi_ht_cap_quirk on resume tooTejun Heo
http://bugzilla.kernel.org/show_bug.cgi?id=12542 reports that with the quirk not applied on resume, msi stops working after resuming and mcp78s ahci fails due to IRQ mis-delivery. Apply it on resume too. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peer Chen <pchen@nvidia.com> Cc: Tj <linux@tjworld.net> Reported-by: Nicolas Derive <kalon33@ubuntu.com> Cc: Greg KH <greg@kroah.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-09-09PCI: Unhide the SMBus on the Compaq Evo D510 USDTJean Delvare
One more form factor for Compaq Evo D510, which needs the same quirk as the other form factors. Apparently there's no hardware monitoring chip on that one, but SPD EEPROMs, so it's still worth unhiding the SMBus. Signed-off-by: Jean Delvare <khali@linux-fr.org> Tested-by: Nuzhna Pomoshch <nuzhna_pomoshch@yahoo.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-29PCI: More PATA quirks for not entering D3Alan Cox
The ALi loses some state if it goes into D3. Unfortunately even with the chipset documents I can't figure out how to restore some bits of it. The VIA one saves/restores apparently fine but the ACPI _GTM methods break on some platforms if we do this and this causes cable misdetections. These are both effectively regressions as historically nothing matched the devices and then decided not to bind to them. Nowdays something is binding to all sorts of devices and a result they get dumped into D3. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-22Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (74 commits) PCI: make msi_free_irqs() to use msix_mask_irq() instead of open coded write PCI: Fix the NIU MSI-X problem in a better way PCI ASPM: remove get_root_port_link PCI ASPM: cleanup pcie_aspm_sanity_check PCI ASPM: remove has_switch field PCI ASPM: cleanup calc_Lx_latency PCI ASPM: cleanup pcie_aspm_get_cap_device PCI ASPM: cleanup clkpm checks PCI ASPM: cleanup __pcie_aspm_check_state_one PCI ASPM: cleanup initialization PCI ASPM: cleanup change input argument of aspm functions PCI ASPM: cleanup misc in struct pcie_link_state PCI ASPM: cleanup clkpm state in struct pcie_link_state PCI ASPM: cleanup latency field in struct pcie_link_state PCI ASPM: cleanup aspm state field in struct pcie_link_state PCI ASPM: fix typo in struct pcie_link_state PCI: drivers/pci/slot.c should depend on CONFIG_SYSFS PCI: remove redundant __msi_set_enable() PCI PM: consistently use type bool for wake enable variable x86/ACPI: Correct maximum allowed _CRS returned resources and warn if exceeded ...
2009-06-16PCI quirk: HP hides SMBus controller in Compaq nx9500 laptopsMichal Miroslaw
I found no references to SMBus in ACPI DSDT disassembly on my laptop so this should be safe. Signed-off-by: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-16PCI quirk: unhide 'Overflow' device on i828{6,7}5P/PE chipsetsMichal Miroslaw
Some BIOSes hide 'overflow' device (dev #6) for i82875P/PE chipsets. The same happens for i82865P/PE. Add a quirk to enable this device. This allows i82875 EDAC driver to bind to chipset's dev #6 and not dev #0 as the latter is used by AGP driver. On my laptop (i82865P based) ACPI code is disabling this device again in \_SB.PCI0._CRS method (called at least at PNP init time). This can be easily worked around by patching DSDT. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Acked-by: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11PCI: expose SMBus on Asus notebook A6LMats Erik Andersson
Addition of one unknown subsystem identifier to the quirks handler for chipset i82855GM_HB on notebook Asus A6L. This exposes the otherwise hidden SMBus controller within the south bridge ICH4-M. Signed-off-by: Mats Erik Andersson <mats.andersson@gisladisker.se> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-05-18Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/scsi/fcoe/fcoe.c
2009-05-06pci: update 82576 sr-iov quirk with latest device IDsAlexander Duyck
The current quirk doesn't include all 82576 device IDs. This update resolves that. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-22PCI quirk: disable MSI on VIA VT3364 chipsetsThomas Renninger
Without this patch, Broadcom BCM5906 Ethernet controllers set up via MSI cause the machine to hang. Tejun agreed that the best is to blacklist the whole chipset and after adding it, seeing the other VIA quirks disabling MSI, this very much looks like the right way. Cc: <stable@kernel.org> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI: don't corrupt enable_cnt when doing manual resource alignmentYuji Shimada
This patch fixes breakage of of enable_cnt in quirk_resource_alignment. Currently, quirk_resource_alignment calls pci_disable_device. pci_disable_device decrements enable_cnt, so that enable_cnt becomes -1. The patch disables memory decoding, writing command register directly. So enable_cnt is not broken. Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI: SR-IOV quirk for Intel 82576 NICYu Zhao
If BIOS doesn't allocate resources for the SR-IOV BARs, zero the Flash BAR and program the SR-IOV BARs to use the old Flash Memory Space. Please refer to Intel 82576 Gigabit Ethernet Controller Datasheet section 7.9.2.14.2 for details. http://download.intel.com/design/network/datashts/82576_Datasheet.pdf Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30PCI: fix HT MSI mapping fixYinghai Lu
Impact: fix bug This patch reworks the nv_msi_ht_cap_quirk() and will only try to avoid to enable ht_msi on device following that root dev, and don't touch that root dev, but only do that trick with end_device on the chain. Reported-by: Prakash Punnoor <prakash@punnoor.de> Tested-by: Prakash Punnoor <prakash@punnoor.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-26PCI: don't enable too much HT MSI mappingYinghai Lu
Impact: fix bug Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card. This patch reworks nv_msi_ht_cap_quirk() and will only avoid enabling ht_msi on devices following that root device. Reported-by: Prakash Punnoor <prakash@punnoor.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20PCI: Compaq Evo D510 SMBus quirk using USB instead of VGADavid O'Shea
On the Compaq Evo D510 SFF/CMT, a PCI quirk activated the SMBus device based on detection of the on-board VGA controller, but the on-board VGA is disabled if an AGP card is inserted, so look for one of the USB controllers instead. Signed-off-by: David O'Shea <dcoshea@hotmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20PCI: allow assignment of memory resources with a specified alignmentYuji Shimada
This patch allows memory resources to be assigned with a specified alignment at boot-time or run-time. The patch is useful when we use PCI pass-through, because page-aligned memory resources are required to securely share PCI resources with guest drivers. If you want to assign the resource at boot time, please set "pci=resource_alignment=" boot parameter. This is format of "pci=resource_alignment=" boot parameter: [<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...] Specifies alignment and device to reassign aligned memory resources. If <order of align> is not specified, PAGE_SIZE is used as alignment. PCI-PCI bridge can be specified, if resource windows need to be expanded. This is example: pci=resource_alignment=20@07:00.0;18@0f:00.0;00:1d.7 If you want to assign the resource at run-time, please set "/sys/bus/pci/resource_alignment" file, and hot-remove the device and hot-add the device. For this purpose, fakephp or PCI hotplug interfaces can be used. The format of "/sys/bus/pci/resource_alignment" file is the same with boot parameter. You can use "," instead of ";". For example: # cd /sys/bus/pci # echo -n 20@12:00.0 > resource_alignment # echo 1 > devices/0000:12:00.0/remove # echo 1 > rescan Reviewed-by: Alex Chiang <achiang@hp.com> Reviewed-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-19PCI quirk: don't mark one netmos as class otherJiri Slaby
Let it stay as serial, since it doesn't have subdevice in the form of 0x00PS. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-12pci: Fix typo in message while disabling HT MSI mappingPrakash Punnoor
"Enabling" should read "Disabling" Signed-off-by: Prakash Punnoor <prakash@punnoor.de> Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 20:49:39 +0000