summaryrefslogtreecommitdiff
path: root/drivers/pci/probe.c
AgeCommit message (Collapse)Author
2020-06-06Merge tag 'pci-v5.8-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Program MPS for RCiEP devices (Ashok Raj) - Fix pci_register_host_bridge() device_register() error handling (Rob Herring) - Fix pci_host_bridge struct device release/free handling (Rob Herring) Resource management: - Allow resizing BARs for devices on root bus (Ard Biesheuvel) Power management: - Reduce Thunderbolt resume time by working around devices that don't support DLL Link Active reporting (Mika Westerberg) - Work around a Pericom USB controller OHCI/EHCI PME# defect (Kai-Heng Feng) Virtualization: - Add ACS quirk for Intel Root Complex Integrated Endpoints (Ashok Raj) - Avoid FLR for AMD Starship USB 3.0 (Kevin Buettner) - Avoid FLR for AMD Matisse HD Audio & USB 3.0 (Marcos Scriven) Error handling: - Use only _OSC (not HEST FIRMWARE_FIRST) to determine AER ownership (Alexandru Gagniuc, Kuppuswamy Sathyanarayanan) - Reduce verbosity by logging only ACPI_NOTIFY_DISCONNECT_RECOVER events (Kuppuswamy Sathyanarayanan) - Don't enable AER by default in Kconfig (Bjorn Helgaas) Peer-to-peer DMA: - Add AMD Zen Raven and Renoir Root Ports to whitelist (Alex Deucher) ASPM: - Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges (Kai-Heng Feng) Endpoint framework: - Fix DMA channel release in test (Kunihiko Hayashi) - Add page size as argument to pci_epc_mem_init() (Lad Prabhakar) - Add support to handle multiple base for mapping outbound memory (Lad Prabhakar) Generic host bridge driver: - Support building as module (Rob Herring) - Eliminate pci_host_common_probe wrappers (Rob Herring) Amlogic Meson PCIe controller driver: - Don't use FAST_LINK_MODE to set up link (Marc Zyngier) Broadcom STB PCIe controller driver: - Disable ASPM L0s if 'aspm-no-l0s' in DT (Jim Quinlan) - Fix clk_put() error (Jim Quinlan) - Fix window register offset (Jim Quinlan) - Assert fundamental reset on initialization (Nicolas Saenz Julienne) - Add notify xHCI reset property (Nicolas Saenz Julienne) - Add init routine for Raspberry Pi 4 VL805 USB controller (Nicolas Saenz Julienne) - Sync with Raspberry Pi 4 firmware for VL805 initialization (Nicolas Saenz Julienne) Cadence PCIe controller driver: - Remove "cdns,max-outbound-regions" DT property (replaced by "ranges") (Kishon Vijay Abraham I) - Read 32-bit (not 16-bit) Vendor ID/Device ID property from DT (Kishon Vijay Abraham I) Marvell Aardvark PCIe controller driver: - Improve link training (Marek Behún) - Add PHY support (Marek Behún) - Add "phys", "max-link-speed", "reset-gpios" to dt-binding (Marek Behún) - Train link immediately after enabling training to work around detection issues with some cards (Pali Rohár) - Issue PERST via GPIO to work around detection issues (Pali Rohár) - Don't blindly enable ASPM L0s (Pali Rohár) - Replace custom macros by standard linux/pci_regs.h macros (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix probe failure path to release resource (Wei Hu) - Retry PCI bus D0 entry on invalid device state for kdump (Wei Hu) Renesas R-Car PCIe controller driver: - Fix incorrect programming of OB windows (Andrew Murray) - Add suspend/resume (Kazufumi Ikeda) - Rename pcie-rcar.c to pcie-rcar-host.c (Lad Prabhakar) - Add endpoint controller driver (Lad Prabhakar) - Fix PCIEPAMR mask calculation (Lad Prabhakar) - Add r8a77961 to DT binding (Yoshihiro Shimoda) Socionext UniPhier Pro5 controller driver: - Add endpoint controller driver (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Program outbound ATU upper limit register (Alan Mikhak) - Fix inner MSI IRQ domain registration (Marc Zyngier) Miscellaneous: - Check for platform_get_irq() failure consistently (negative return means failure) (Aman Sharma) - Fix several runtime PM get/put imbalances (Dinghao Liu) - Use flexible-array and struct_size() helpers for code cleanup (Gustavo A. R. Silva) - Update & fix issues in bridge emulation of PCIe registers (Jon Derrick) - Add macros for bridge window names (PCI_BRIDGE_IO_WINDOW, etc) (Krzysztof Wilczyński) - Work around Intel PCH MROMs that have invalid BARs (Xiaochun Lee)" * tag 'pci-v5.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits) PCI: uniphier: Add Socionext UniPhier Pro5 PCIe endpoint controller driver PCI: Add ACS quirk for Intel Root Complex Integrated Endpoints PCI/DPC: Print IRQ number used by port PCI/AER: Use "aer" variable for capability offset PCI/AER: Remove redundant dev->aer_cap checks PCI/AER: Remove redundant pci_is_pcie() checks PCI/AER: Remove HEST/FIRMWARE_FIRST parsing for AER ownership PCI: tegra: Fix runtime PM imbalance on error PCI: vmd: Filter resource type bits from shadow register PCI: tegra194: Fix runtime PM imbalance on error dt-bindings: PCI: Add UniPhier PCIe endpoint controller description PCI: hv: Use struct_size() helper PCI: Rename _DSM constants to align with spec PCI: Avoid FLR for AMD Starship USB 3.0 PCI: Avoid FLR for AMD Matisse HD Audio & USB 3.0 x86/PCI: Drop unused xen_register_pirq() gsi_override parameter PCI: dwc: Use private data pointer of "struct irq_domain" to get pcie_port PCI: amlogic: meson: Don't use FAST_LINK_MODE to set up link PCI: dwc: Fix inner MSI IRQ domain registration PCI: dwc: pci-dra7xx: Use devm_platform_ioremap_resource_byname() ...
2020-06-04Merge branch 'pci/misc'Bjorn Helgaas
- Clarify that platform_get_irq() should never return 0 (Bjorn Helgaas) - Check for platform_get_irq() failure consistently (Bjorn Helgaas) - Replace zero-length array with flexible-array (Gustavo A. R. Silva) - Unify pcie_find_root_port() and pci_find_pcie_root_port() (Yicong Yang) - Quirk Intel C620 MROMs, which have non-BARs in BAR locations (Xiaochun Lee) - Fix pcie_pme_resume() and pcie_pme_remove() kernel-doc (Jay Fang) - Rename _DSM constants to align with spec (Krzysztof Wilczyński) * pci/misc: PCI: Rename _DSM constants to align with spec PCI/PME: Fix kernel-doc of pcie_pme_resume() and pcie_pme_remove() x86/PCI: Mark Intel C620 MROMs as having non-compliant BARs PCI: Unify pcie_find_root_port() and pci_find_pcie_root_port() PCI: Replace zero-length array with flexible-array PCI: Check for platform_get_irq() failure consistently driver core: platform: Clarify that IRQ 0 is invalid
2020-05-27PCI: Don't disable decoding when mmio_always_on is setJiaxun Yang
Don't disable MEM/IO decoding when a device have both non_compliant_bars and mmio_always_on. That would allow us quirk devices with junk in BARs but can't disable their decoding. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Acked-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-05-14PCI: Program MPS for RCiEP devicesAshok Raj
Root Complex Integrated Endpoints (RCiEPs) do not have an upstream bridge, so pci_configure_mps() previously ignored them, which may result in reduced performance. Instead, program the Max_Payload_Size of RCiEPs to the maximum supported value (unless it is limited for the PCIE_BUS_PEER2PEER case). This also affects the subsequent programming of Max_Read_Request_Size because Linux programs MRRS based on the MPS value. Fixes: 9dae3a97297f ("PCI: Move MPS configuration check to pci_configure_device()") Link: https://lore.kernel.org/r/1585343775-4019-1-git-send-email-ashok.raj@intel.com Tested-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2020-05-14PCI: Fix pci_host_bridge struct device release/free handlingRob Herring
The PCI code has several paths where the struct pci_host_bridge is freed directly. This is wrong because it contains a struct device which is refcounted and should be freed using put_device(). This can result in use-after-free errors. I think this problem has existed since 2012 with commit 7b5436635800 ("PCI: add generic device into pci_host_bridge struct"). It generally hasn't mattered as most host bridge drivers are still built-in and can't unbind. The problem is a struct device should never be freed directly once device_initialize() is called and a ref is held, but that doesn't happen until pci_register_host_bridge(). There's then a window between allocating the host bridge and pci_register_host_bridge() where kfree should be used. This is fragile and requires callers to do the right thing. To fix this, we need to split device_register() into device_initialize() and device_add() calls, so that the host bridge struct is always freed by using a put_device(). devm_pci_alloc_host_bridge() is using devm_kzalloc() to allocate struct pci_host_bridge which will be freed directly. Instead, we can use a custom devres action to call put_device(). Link: https://lore.kernel.org/r/20200513223859.11295-2-robh@kernel.org Reported-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-05-14PCI: Fix pci_register_host_bridge() device_register() error handlingRob Herring
If device_register() has an error, we should bail out of pci_register_host_bridge() rather than continuing on. Fixes: 37d6a0a6f470 ("PCI: Add pci_register_host_bridge() interface") Link: https://lore.kernel.org/r/20200513223859.11295-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de>
2020-05-14PCI: Unify pcie_find_root_port() and pci_find_pcie_root_port()Yicong Yang
Previously we used pcie_find_root_port() to find a Root Port from a PCIe device and pci_find_pcie_root_port() to find a Root Port from a Conventional PCI device. Unify the two functions and use pcie_find_root_port() to find a Root Port from either a Conventional PCI device or a PCIe device. Then there is no need to distinguish the type of the device. Link: https://lore.kernel.org/r/1589019568-5216-1-git-send-email-yangyicong@hisilicon.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # thunderbolt
2020-04-02Merge branch 'pci/enumeration'Bjorn Helgaas
- Add PCIe 32 GT/s speed decoding for sysfs "max_link_speed" and dmesg notes about available bandwidth (Yicong Yang) - Simplify and unify PCI bus/link speed reporting (Yicong Yang) * pci/enumeration: PCI: Add PCIE_LNKCAP2_SLS2SPEED() macro PCI: Use pci_speed_string() for all PCI/PCI-X/PCIe strings PCI: Add pci_speed_string() PCI: Add 32 GT/s decoding in some macros
2020-03-28PCI/DPC: Add Error Disconnect Recover (EDR) supportKuppuswamy Sathyanarayanan
Error Disconnect Recover (EDR) is a feature that allows ACPI firmware to notify OSPM that a device has been disconnected due to an error condition (ACPI v6.3, sec 5.6.6). OSPM advertises its support for EDR on PCI devices via _OSC (see [1], sec 4.5.1, table 4-4). The OSPM EDR notify handler should invalidate software state associated with disconnected devices and may attempt to recover them. OSPM communicates the status of recovery to the firmware via _OST (sec 6.3.5.2). For PCIe, firmware may use Downstream Port Containment (DPC) to support EDR. Per [1], sec 4.5.1, table 4-6, even if firmware has retained control of DPC, OSPM may read/write DPC control and status registers during the EDR notification processing window, i.e., from the time it receives an EDR notification until it clears the DPC Trigger Status. Note that per [1], sec 4.5.1 and 4.5.2.4, 1. If the OS supports EDR, it should advertise that to firmware by setting OSC_PCI_EDR_SUPPORT in _OSC Support. 2. If the OS sets OSC_PCI_EXPRESS_DPC_CONTROL in _OSC Control to request control of the DPC capability, it must also set OSC_PCI_EDR_SUPPORT in _OSC Support. Add an EDR notify handler to attempt recovery. [1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 [bhelgaas: squash add/enable patches into one] Link: https://lore.kernel.org/r/90f91fe6d25c13f9d2255d2ce97ca15be307e1bb.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org>
2020-03-28PCI/DPC: Cache DPC capabilities in pci_init_capabilities()Kuppuswamy Sathyanarayanan
Since Error Disconnect Recover needs to use DPC error handling routines even if the OS doesn't have control of DPC, move the initalization and caching of DPC capabilities from the DPC driver to pci_init_capabilities(). Link: https://lore.kernel.org/r/5888380657c8b9551675b5dbd48e370e4fd2703d.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-03-10PCI: Add pci_speed_string()Bjorn Helgaas
Add pci_speed_string() to return a text description of the supplied bus or link speed. The slot code previously used the private pci_bus_speed_strings[] array for this purpose, but adding this interface will enable us to consolidate similar code elsewhere. Export pcie_link_speed[] and pci_speed_string() so they can be used by modules. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-11-28Merge branch 'pci/trivial'Bjorn Helgaas
- Fix typos and comments (Bjorn Helgaas) - Fix Kconfig whitespace errors (Krzysztof Kozlowski) * pci/trivial: PCI: Fix indentation PCI: Fix typos PCI: Remove useless comments and tidy others PCI: Remove unnecessary includes # Conflicts: # drivers/pci/probe.c
2019-11-28Merge branch 'pci/virtualization'Bjorn Helgaas
- Fix erroneous intel-iommu dependency on CONFIG_AMD_IOMMU (Bjorn Helgaas) - Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI (Bjorn Helgaas) - Allow VFs to use PRI (the PF PRI is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Allow VFs to use PASID (the PF PASID capability is shared by the VFs, but the code previously didn't recognize that) (Kuppuswamy Sathyanarayanan) - Disconnect PF and VF ATS enablement, since ATS in PFs and associated VFs can be enabled independently (Kuppuswamy Sathyanarayanan) - Cache PRI and PASID capability offsets (Kuppuswamy Sathyanarayanan) - Cache the PRI PRG Response PASID Required bit (Bjorn Helgaas) - Consolidate ATS declarations in linux/pci-ats.h (Krzysztof Wilczynski) - Remove unused PRI and PASID stubs (Bjorn Helgaas) - Removed unnecessary EXPORT_SYMBOL_GPL() from ATS, PRI, and PASID interfaces that are only used by built-in IOMMU drivers (Bjorn Helgaas) - Hide PRI and PASID state restoration functions used only inside the PCI core (Bjorn Helgaas) - Fix the UPDCR register address in the Intel ACS quirk (Steffen Liebergeld) - Add a DMA alias quirk for the Intel VCA NTB (Slawomir Pawlowski) - Serialize sysfs sriov_numvfs reads vs writes (Pierre Crégut) - Update Cavium ACS quirk for ThunderX2 and ThunderX3 (George Cherian) - Unify ACS quirk implementations (Bjorn Helgaas) * pci/virtualization: PCI: Unify ACS quirk desired vs provided checking PCI: Make ACS quirk implementations more uniform PCI: Apply Cavium ACS quirk to ThunderX2 and ThunderX3 PCI/IOV: Serialize sysfs sriov_numvfs reads vs writes PCI: Add DMA alias quirk for Intel VCA NTB PCI: Fix Intel ACS quirk UPDCR register address PCI/ATS: Make pci_restore_pri_state(), pci_restore_pasid_state() private PCI/ATS: Remove unnecessary EXPORT_SYMBOL_GPL() PCI/ATS: Remove unused PRI and PASID stubs PCI/ATS: Consolidate ATS declarations in linux/pci-ats.h PCI/ATS: Cache PRI PRG Response PASID Required bit PCI/ATS: Cache PASID Capability offset PCI/ATS: Cache PRI Capability offset PCI/ATS: Disable PF/VF ATS service independently PCI/ATS: Handle sharing of PF PASID Capability with all VFs PCI/ATS: Handle sharing of PF PRI Capability with all VFs PCI/ATS: Move pci_prg_resp_pasid_required() to CONFIG_PCI_PRI iommu/vt-d: Select PCI_PRI for INTEL_IOMMU_SVM
2019-11-28Merge branch 'pci/resource'Bjorn Helgaas
- Protect pci_reassign_bridge_resources() against concurrent addition/removal (Benjamin Herrenschmidt) - Fix bridge dma_ranges resource list cleanup (Rob Herring) - Add PCI_STD_NUM_BARS for the number of standard BARs (Denis Efremov) - Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters to control the MMIO and prefetchable MMIO window sizes of hotplug bridges independently (Nicholas Johnson) - Fix MMIO/MMIO_PREF window assignment that assigned more space than desired (Nicholas Johnson) - Only enforce bus numbers from bridge EA if the bridge has EA devices downstream (Subbaraya Sundeep) * pci/resource: PCI: Do not use bus number zero from EA capability PCI: Avoid double hpmemsize MMIO window assignment PCI: Add "pci=hpmmiosize" and "pci=hpmmioprefsize" parameters PCI: Add PCI_STD_NUM_BARS for the number of standard BARs PCI: Fix missing bridge dma_ranges resource list cleanup PCI: Protect pci_reassign_bridge_resources() against concurrent addition/removal
2019-11-28Merge branch 'pci/misc'Bjorn Helgaas
- Add NumaChip SPDX header (Krzysztof Wilczynski) - Replace EXTRA_CFLAGS with ccflags-y (Krzysztof Wilczynski) - Remove unused includes (Krzysztof Wilczynski) - Avoid AMD FCH XHCI USB PME# from D0 defect that prevents wakeup on USB 2.0 or 1.1 connect events (Kai-Heng Feng) - Removed unused sysfs attribute groups (Ben Dooks) - Remove PTM and ASPM dependencies on PCIEPORTBUS (Bjorn Helgaas) - Add PCIe Link Control 2 register field definitions to replace magic numbers in AMDGPU and Radeon CIK/SI (Bjorn Helgaas) - Fix incorrect Link Control 2 Transmit Margin usage in AMDGPU and Radeon CIK/SI PCIe Gen3 link training (Bjorn Helgaas) - Use pcie_capability_read_word() instead of pci_read_config_word() in AMDGPU and Radeon CIK/SI (Frederick Lawler) * pci/misc: drm/radeon: Prefer pcie_capability_read_word() drm/radeon: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/radeon: Correct Transmit Margin masks drm/amdgpu: Prefer pcie_capability_read_word() drm/amdgpu: Replace numbers with PCI_EXP_LNKCTL2 definitions drm/amdgpu: Correct Transmit Margin masks PCI: Add #defines for Enter Compliance, Transmit Margin PCI: Allow building PCIe things without PCIEPORTBUS PCI: Remove PCIe Kconfig dependencies on PCI PCI/ASPM: Remove dependency on PCIEPORTBUS PCI/PTM: Remove dependency on PCIEPORTBUS PCI/PTM: Remove spurious "d" from granularity message PCI: sysfs: Remove unused attribute groups x86/PCI: Avoid AMD FCH XHCI USB PME# from D0 defect PCI: Remove unused includes and superfluous struct declaration x86/PCI: Replace deprecated EXTRA_CFLAGS with ccflags-y x86/PCI: Correct SPDX comment style x86/PCI: Add NumaChip SPDX GPL-2.0 to replace COPYING boilerplate
2019-11-21PCI: Remove unused includes and superfluous struct declarationKrzysztof Wilczynski
Remove <linux/pci.h> and <linux/msi.h> from being included directly as part of the include/linux/of_pci.h, and remove superfluous declaration of struct of_phandle_args. Move users of include <linux/of_pci.h> to include <linux/pci.h> and <linux/msi.h> directly rather than rely on both being included transitively through <linux/of_pci.h>. Link: https://lore.kernel.org/r/20190903113059.2901-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rob Herring <robh@kernel.org>
2019-11-14PCI: Do not use bus number zero from EA capabilitySubbaraya Sundeep
As per PCIe r5.0, sec 7.8.5.2, fixed bus numbers of a bridge must be zero when no function that uses EA is located behind it. Hence, if EA supplies bus numbers of zero, assign bus numbers normally. A secondary bus can never have a bus number of zero, so setting a bridge's Secondary Bus Number to zero makes downstream devices unreachable. [bhelgaas: retain bool return value so "zero is invalid" logic is local] Fixes: 2dbce5901179 ("PCI: Assign bus numbers present in EA capability for bridges") Link: https://lore.kernel.org/r/1572850664-9861-1-git-send-email-sundeep.lkml@gmail.com Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org # v5.2+
2019-10-23PCI: Warn if no host bridge NUMA node infoYunsheng Lin
In pci_call_probe(), we try to run driver probe functions on the node where the device is attached. If we don't know which node the device is attached to, the driver will likely run on the wrong node. This will still work, but performance will not be as good as it could be. On NUMA systems, warn if we don't know which node a PCI host bridge is attached to. This is likely an indication that ACPI didn't supply a _PXM method or the DT didn't supply a "numa-node-id" property. [bhelgaas: commit log, check bus node] Link: https://lore.kernel.org/r/1571467543-26125-1-git-send-email-linyunsheng@huawei.com Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-17PCI: Remove useless comments and tidy othersBjorn Helgaas
Remove useless comments and tidy others for better readability. Whitespace changes only. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-15PCI/ATS: Cache PASID Capability offsetKuppuswamy Sathyanarayanan
Previously each PASID interface searched for the PASID Capability. Cache the capability offset the first time we use it instead of searching each time. [bhelgaas: commit log, reorder patch to later, call pci_pasid_init() from pci_init_capabilities()] Link: https://lore.kernel.org/r/4957778959fa34eab3e8b3065d1951989c61cb0f.1567029860.git.sathyanarayanan.kuppuswamy@linux.intel.com Link: https://lore.kernel.org/r/20190905193146.90250-6-helgaas@kernel.org Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-15PCI/ATS: Cache PRI Capability offsetKuppuswamy Sathyanarayanan
Previously each PRI interface searched for the PRI Capability. Cache the capability offset the first time we use it instead of searching each time. [bhelgaas: commit log, reorder patch to later, call pci_pri_init() from pci_init_capabilities()] Link: https://lore.kernel.org/r/0c5495d376faf6dbb8eb2165204c474438aaae65.156 7029860.git.sathyanarayanan.kuppuswamy@linux.intel.com Link: https://lore.kernel.org/r/20190905193146.90250-5-helgaas@kernel.org Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-14PCI: Fix missing bridge dma_ranges resource list cleanupRob Herring
Commit e80a91ad302b ("PCI: Add dma_ranges window list") added a dma_ranges resource list, but failed to correctly free the list when devm_pci_alloc_host_bridge() is used. Only the iproc host bridge driver is using the dma_ranges list. Fixes: e80a91ad302b ("PCI: Add dma_ranges window list") Link: https://lore.kernel.org/r/20191008012325.25700-1-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Srinath Mannam <srinath.mannam@broadcom.com>
2019-09-23Merge tag 'pci-v5.4-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ...
2019-09-07PCI: Get rid of dev->has_secondary_link flagMika Westerberg
In some systems, the Device/Port Type in the PCI Express Capabilities register incorrectly identifies upstream ports as downstream ports. d0751b98dfa3 ("PCI: Add dev->has_secondary_link to track downstream PCIe links") addressed this by adding pci_dev.has_secondary_link, which is set for downstream ports. But this is confusing because pci_pcie_type() sometimes gives the wrong answer, and it's not obvious that we should use pci_dev.has_secondary_link instead. Reduce the confusion by correcting the type of the port itself so that pci_pcie_type() returns the actual type regardless of what the Device/Port Type register claims it is. Update the users to call pci_pcie_type() and pcie_downstream_port() accordingly, and remove pci_dev.has_secondary_link completely. Link: https://lore.kernel.org/linux-pci/20190703133953.GK128603@google.com/ Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/20190822085553.62697-2-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-08-28PCI/ACPI: Remove unnecessary struct hotplug_program_opsKrzysztof Wilczynski
Move the ACPI-specific structs hpx_type0, hpx_type1, hpx_type2 and hpx_type3 to drivers/pci/pci-acpi.c as they are not used anywhere else. Then remove the struct hotplug_program_ops that has been shared between drivers/pci/probe.c and drivers/pci/pci-acpi.c from drivers/pci/pci.h as it is no longer needed. The struct hotplug_program_ops was added by 87fcf12e846a ("PCI/ACPI: Remove the need for 'struct hotplug_params'") and replaced previously used struct hotplug_params enabling the support for the _HPX Type 3 Setting Record that was added by f873c51a155a ("PCI/ACPI: Implement _HPX Type 3 Setting Record"). The new struct allowed for the static functions such program_hpx_type0(), program_hpx_type1(), etc., from the drivers/pci/probe.c to be called from the function pci_acpi_program_hp_params() in the drivers/pci/pci-acpi.c. Previously a programming of _HPX Type 0 was as follows: drivers/pci/probe.c: program_hpx_type0() ... pci_configure_device() hp_ops = { .program_type0 = program_hpx_type0, ... } pci_acpi_program_hp_params(&hp_ops) drivers/pci/pci-acpi.c: pci_acpi_program_hp_params(&hp_ops) acpi_run_hpx(hp_ops) decode_type0_hpx_record() hp_ops->program_type0 # program_hpx_type0() called via hp_ops After the ACPI-specific functions, structs, enums, etc., have been moved to drivers/pci/pci-acpi.c there is no need for the hotplug_program_ops as all of the _HPX Type 0, 1, 2 and 3 are directly accessible. Link: https://lore.kernel.org/r/20190827094951.10613-4-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-28PCI/ACPI: Move _HPP & _HPX functions to pci-acpi.cKrzysztof Wilczynski
Move program_hpx_type0(), program_hpx_type1(), etc., and enums hpx_type3_dev_type, hpx_type3_fn_type and hpx_type3_cfg_loc to drivers/pci/pci-acpi.c as these functions and enums are ACPI-specific. Move structs hpx_type0, hpx_type1, hpx_type2 and hpx_type3 to drivers/pci/pci.h as these are shared between drivers/pci/pci-acpi.c and drivers/pci/probe.c. Link: https://lore.kernel.org/r/20190827094951.10613-3-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-28PCI/ACPI: Rename _HPX structs from hpp_* to hpx_*Krzysztof Wilczynski
The names of the hpp_type0, hpp_type1 and hpp_type2 structs suggest that they're related to _HPP, when in fact they're related to _HPX. The struct hpp_type0 denotes an _HPX Type 0 setting record that supersedes the _HPP setting record, and it has been used interchangeably for _HPP as per the ACPI specification (see version 6.3, section 6.2.9.1) which states that it should be applied to PCI, PCI-X and PCI Express devices, with settings being ignored if they are not applicable. Rename them to hpx_type0, hpx_type1 and hpx_type2 to reflect their relation to _HPX rather than _HPP. Link: https://lore.kernel.org/r/20190827094951.10613-2-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-07-30drivers: Add generic helper to match any deviceSuzuki K Poulose
Add a generic helper to match any/all devices. Using this introduce new wrappers {bus/driver/class}_find_next_device(). Cc: Elie Morisse <syniurge@gmail.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Nehal Shah <nehal-bakulchandra.shah@amd.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI Link: https://lore.kernel.org/r/20190723221838.12024-7-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-15Merge tag 'pci-v5.3-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us to preserve its resource assignments (Benjamin Herrenschmidt) - Simplify resource distribution (Nicholas Johnson) - Decode 32 GT/s link speed (Gustavo Pimentel) Virtualization: - Fix incorrect caching of VF config space size (Alex Williamson) - Fix VF driver probing sysfs knobs (Alex Williamson) Peer-to-peer DMA: - Fix dma_virt_ops check (Logan Gunthorpe) Altera host bridge driver: - Allow building as module (Ley Foon Tan) Armada 8K host bridge driver: - add PHYs support (Miquel Raynal) DesignWare host bridge driver: - Export APIs to support removable loadable module (Vidya Sagar) - Enable Relaxed Ordering erratum workaround only on Tegra20 & Tegra30 (Vidya Sagar) Hyper-V host bridge driver: - Fix use-after-free in eject (Dexuan Cui) Mobiveil host bridge driver: - Clean up and fix many issues, including non-identify mapped windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou Zhiqiang) Qualcomm host bridge driver: - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson) - Add QCS404 support (Bjorn Andersson) - Assert PERST for at least 100ms (Niklas Cassel) R-Car host bridge driver: - Add r8a774a1 DT support (Biju Das) Tegra host bridge driver: - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol details) AER, GPIO-based PERST# (Manikanta Maddireddy) - Fix many issues, including power-on failure cases, interrupt masking in suspend, UPHY settings, AFI dynamic clock gating, pending DLL transactions (Manikanta Maddireddy) Xilinx host bridge driver: - Fix NWL Multi-MSI programming (Bharat Kumar Gogada) Endpoint support: - Fix 64bit BAR support (Alan Mikhak) - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko) Bug fixes: - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu) - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner) - Ignore lockdep for sysfs "remove" (Marek Vasut) Misc: - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)" * tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits) PCI: Enable NVIDIA HDA controllers tools: PCI: Fix installation when `make tools/pci_install` PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB PCI: Fix typos and whitespace errors PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr() PCI: mobiveil: Fix infinite-loop in the INTx handling function PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup PCI: mobiveil: Clear the control fields before updating it PCI: mobiveil: Add configured inbound windows counter PCI: mobiveil: Fix the valid check for inbound and outbound windows PCI: mobiveil: Clean-up program_{ib/ob}_windows() PCI: mobiveil: Remove an unnecessary return value check PCI: mobiveil: Fix error return values PCI: mobiveil: Refactor the MEM/IO outbound window initialization PCI: mobiveil: Make some register updates more readable PCI: mobiveil: Reformat the code for readability dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional ...
2019-07-12Merge branch 'pci/virtualization'Bjorn Helgaas
- Fix problem with caching VF config space size (Alex Williamson) * pci/virtualization: PCI/IOV: Assume SR-IOV VFs support extended config space. Revert "PCI/IOV: Use VF0 cached config space size for other VFs"
2019-07-03PCI/IOV: Assume SR-IOV VFs support extended config space.Alex Williamson
The SR-IOV specification requires both PFs and VFs to implement a PCIe capability. Generally this is sufficient to assume extended config space is present, but we generally also perform additional tests to make sure the extended config space is reachable and not simply an alias of standard config space. For a VF to exist extended config space must be accessible on the PF, therefore we can also assume it to be accessible on the VF. This enables a micro performance optimization previously implemented in commit 975bb8b4dc93 ("PCI/IOV: Use VF0 cached config space size for other VFs") to speed up probing of VFs. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: Hao Zheng <yinhe@linux.alibaba.com>
2019-07-03Revert "PCI/IOV: Use VF0 cached config space size for other VFs"Alex Williamson
Revert 975bb8b4dc93 ("PCI/IOV: Use VF0 cached config space size for other VFs"), which attempted to cache the config space size from the first VF to re-use for subsequent VFs. The cached value was determined prior to discovering the PCIe capability on the VF, which resulted in the first VF reporting the correct config space size (4K), as it has a special case through pci_cfg_space_size(), while all the other VFs only reported 256 bytes. As this was only a performance optimization, we're better off without it. Fixes: 975bb8b4dc93 ("PCI/IOV: Use VF0 cached config space size for other VFs") Link: https://lore.kernel.org/r/156046663197.29869.3633634445109057665.stgit@gimli.home Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: KarimAllah Ahmed <karahmed@amazon.de> Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: Hao Zheng <yinhe@linux.alibaba.com>
2019-06-24bus_find_device: Unify the match callback with class_find_deviceSuzuki K Poulose
There is an arbitrary difference between the prototypes of bus_find_device() and class_find_device() preventing their callers from passing the same pair of data and match() arguments to both of them, which is the const qualifier used in the prototype of class_find_device(). If that qualifier is also used in the bus_find_device() prototype, it will be possible to pass the same match() callback function to both bus_find_device() and class_find_device(), which will allow some optimizations to be made in order to avoid code duplication going forward. Also with that, constify the "data" parameter as it is passed as a const to the match function. For this reason, change the prototype of bus_find_device() to match the prototype of class_find_device() and adjust its callers to use the const qualifier in accordance with the new prototype of it. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Corey Minyard <minyard@acm.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Kershner <david.kershner@unisys.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Airlie <airlied@linux.ie> Cc: Felipe Balbi <balbi@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jonathan Cameron <jic23@kernel.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: Len Brown <lenb@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Jamet <michael.jamet@intel.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Sebastian Ott <sebott@linux.ibm.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Cc: rafael@kernel.org Acked-by: Corey Minyard <minyard@acm.org> Acked-by: David Kershner <david.kershner@unisys.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-13PCI: Decode PCIe 32 GT/s link speedGustavo Pimentel
PCIe r5.0, sec 7.5.3.18, defines a new 32.0 GT/s bit in the Supported Link Speeds Vector of Link Capabilities 2. Decode this new speed. This does not affect the speed of the link, which should be negotiated automatically by the hardware; it only adds decoding when showing the speed to the user. Previously, reading the speed of a link operating at this speed showed "Unknown speed" instead of "32.0 GT/s". Link: https://lore.kernel.org/lkml/92365e3caf0fc559f9ab14bcd053bfc92d4f661c.1559664969.git.gustavo.pimentel@synopsys.com Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-05-14Merge tag 'pci-v5.2-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Add _HPX Type 3 settings support, which gives firmware more influence over device configuration (Alexandru Gagniuc) - Support fixed bus numbers from bridge Enhanced Allocation capabilities (Subbaraya Sundeep) - Add "external-facing" DT property to identify cases where we require IOMMU protection against untrusted devices (Jean-Philippe Brucker) - Enable PCIe services for host controller drivers that use managed host bridge alloc (Jean-Philippe Brucker) - Log PCIe port service messages with pci_dev, not the pcie_device (Frederick Lawler) - Convert pciehp from pciehp_debug module parameter to generic dynamic debug (Frederick Lawler) Peer-to-peer DMA: - Add whitelist of Root Complexes that support peer-to-peer DMA between Root Ports (Christian König) Native controller drivers: - Add PCI host bridge DMA ranges for bridges that can't DMA everywhere, e.g., iProc (Srinath Mannam) - Add Amazon Annapurna Labs PCIe host controller driver (Jonathan Chocron) - Fix Tegra MSI target allocation so DMA doesn't generate unwanted MSIs (Vidya Sagar) - Fix of_node reference leaks (Wen Yang) - Fix Hyper-V module unload & device removal issues (Dexuan Cui) - Cleanup R-Car driver (Marek Vasut) - Cleanup Keystone driver (Kishon Vijay Abraham I) - Cleanup i.MX6 driver (Andrey Smirnov) Significant bug fixes: - Reset Lenovo ThinkPad P50 GPU so nouveau works after reboot (Lyude Paul) - Fix Switchtec firmware update performance issue (Wesley Sheng) - Work around Pericom switch link retraining erratum (Stefan Mätje)" * tag 'pci-v5.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (141 commits) MAINTAINERS: Add Karthikeyan Mitran and Hou Zhiqiang for Mobiveil PCI PCI: pciehp: Remove pointless MY_NAME definition PCI: pciehp: Remove pointless PCIE_MODULE_NAME definition PCI: pciehp: Remove unused dbg/err/info/warn() wrappers PCI: pciehp: Log messages with pci_dev, not pcie_device PCI: pciehp: Replace pciehp_debug module param with dyndbg PCI: pciehp: Remove pciehp_debug uses PCI/AER: Log messages with pci_dev, not pcie_device PCI/DPC: Log messages with pci_dev, not pcie_device PCI/PME: Replace dev_printk(KERN_DEBUG) with dev_info() PCI/AER: Replace dev_printk(KERN_DEBUG) with dev_info() PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible PCI: Cleanup setup-bus.c comments and whitespace PCI: imx6: Allow asynchronous probing PCI: dwc: Save root bus for driver remove hooks PCI: dwc: Use devm_pci_alloc_host_bridge() to simplify code PCI: dwc: Free MSI in dw_pcie_host_init() error path PCI: dwc: Free MSI IRQ page in dw_pcie_free_msi() ...
2019-05-13Merge branch 'pci/printk'Bjorn Helgaas
* pci/printk: PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible
2019-05-13Merge branch 'pci/iova-dma-ranges'Bjorn Helgaas
- Add list of legal DMA address ranges to PCI host bridge (Srinath Mannam) - Reserve inaccessible DMA ranges so IOMMU doesn't allocate them (Srinath Mannam) - Parse iProc DT dma-ranges to learn what PCI devices can reach via DMA (Srinath Mannam) * pci/iova-dma-ranges: PCI: iproc: Add sorted dma ranges resource entries to host bridge iommu/dma: Reserve IOVA for PCIe inaccessible DMA address PCI: Add dma_ranges window list # Conflicts: # drivers/pci/probe.c
2019-05-13Merge branch 'pci/hotplug'Bjorn Helgaas
- Fix RPA and RPA DLPAR refcount issues (Tyrel Datwyler) - Stop exporting pci_get_hp_params() (Alexandru Gagniuc) - Simplify _HPP, _HPX parsing (Alexandru Gagniuc) - Add support for _HPX Type 3 settings (Alexandru Gagniuc) - Tell firmware we support _HPX Type 3 via _OSC (Alexandru Gagniuc) * pci/hotplug: PCI/ACPI: Advertise _HPX Type 3 support via _OSC PCI/ACPI: Implement _HPX Type 3 Setting Record PCI/ACPI: Remove the need for 'struct hotplug_params' PCI/ACPI: Do not export pci_get_hp_params() PCI: rpaphp: Get/put device node reference during slot alloc/dealloc PCI: rpadlpar: Fix leaked device_node references in add/remove paths
2019-05-09PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etcMohan Kumar
Replace dev_printk(KERN_DEBUG) with dev_info(), etc to be more consistent with other logging and avoid checkpatch warnings. The KERN_DEBUG messages could be converted to dev_dbg(), but that depends on CONFIG_DYNAMIC_DEBUG and DEBUG, and we want most of these messages to *always* be in the dmesg log. Link: https://lore.kernel.org/lkml/1555733240-19875-1-git-send-email-mohankumar718@gmail.com Signed-off-by: Mohan Kumar <mohankumar718@gmail.com> [bhelgaas: commit log] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-05-06PCI: Add dma_ranges window listSrinath Mannam
Add a dma_ranges field in PCI host bridge structure to hold resource entries list of memory regions in sorted order representing memory ranges that can be accessed through DMA transactions. Based-on-a-patch-by: Oza Pawandeep <oza.oza@broadcom.com> Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Oza Pawandeep <poza@codeaurora.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2019-04-23PCI/ACPI: Implement _HPX Type 3 Setting RecordAlexandru Gagniuc
The _HPX Type 3 Setting Record is intended to be more generic and allow configuration of settings not possible with Type 2 records. For example, firmware could ensure that the completion timeout value is set accordingly throughout the PCI tree. Implement support for _HPX Type 3 Setting Records, which were added in the ACPI 6.3 spec. Link: https://lore.kernel.org/lkml/20190208162414.3996-4-mr.nuke.me@gmail.com Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-04-23PCI/ACPI: Remove the need for 'struct hotplug_params'Alexandru Gagniuc
We used to first parse all the _HPP and _HPX tables before using the information to program registers of PCIe devices. Up through HPX Type 2, there was only one structure of each type, so we could cheat and store it on the stack. With HPX Type 3 we get an arbitrary number of entries, so the above model doesn't scale that well. Instead of parsing all tables at once, parse and program each entry separately. For _HPP and _HPX Types 0 through 2, this is functionally equivalent. The change enables the upcoming _HPX Type 3 to integrate more easily. Link: https://lore.kernel.org/lkml/20190208162414.3996-3-mr.nuke.me@gmail.com Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [bhelgaas: fix build errors] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-04-17PCI: Assign bus numbers present in EA capability for bridgesSubbaraya Sundeep
The "Enhanced Allocation (EA) for Memory and I/O Resources" ECN, approved 23 October 2014, sec 6.9.1.2, specifies a second DW in the capability for type 1 (bridge) functions to describe fixed secondary and subordinate bus numbers. This ECN was included in the PCIe r4.0 spec, but sec 6.9.1.2 was omitted, presumably by mistake. Read fixed bus numbers from the EA capability for bridges. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> [bhelgaas: add pci_ea_fixed_busnrs() return value] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-04-05PCI: Init PCIe feature bits for managed host bridge allocJean-Philippe Brucker
Two functions allocate a host bridge: devm_pci_alloc_host_bridge() and pci_alloc_host_bridge(). At the moment, only the unmanaged one initializes the PCIe feature bits, which prevents from using features such as hotplug or AER on some systems, when booting with device tree. Make the initialization code common. Fixes: 02bfeb484230 ("PCI/portdrv: Simplify PCIe feature permission checking") Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.17+
2019-03-25PCI/LINK: Deduplicate bandwidth reports for multi-function devicesLukas Wunner
If a multi-function device's bandwidth is already limited when it is enumerated, a message is logged only for function 0. By contrast, when downtraining occurs after enumeration, a message is logged for all functions. That's because the former uses pcie_report_downtraining(), whereas the latter uses __pcie_print_link_status() (which doesn't filter functions != 0). I am seeing this happen on a MacBookPro9,1 with a GPU (function 0) and an integrated HDA controller (function 1). Avoid this incongruence by calling pcie_report_downtraining() in both cases. Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alexandru Gagniuc <alex.gagniuc@dellteam.com>
2019-03-06Merge branch 'pci/enumeration'Bjorn Helgaas
- Probe bridge window attributes only once at enumeration-time to fix device accesses during rescan (Bjorn Helgaas) - Return BAR size (not "size -1 ") from pci_size() to simplify code (Du Changbin) - Use config header type (not class code) identify bridges more reliably (Honghui Zhang) - Work around Intel Denverton incorrect Trace Hub BAR size reporting (Alexander Shishkin) * pci/enumeration: x86/PCI: Fixup RTIT_BAR of Intel Denverton Trace Hub PCI: Rely on config space header type, not class code PCI: Make pci_size() return real BAR size PCI: Probe bridge window attributes once at enumeration-time
2019-03-06Merge branch 'pci/aspm'Bjorn Helgaas
- Use Latency Tolerance Reporting if already enabled by platform (Bjorn Helgaas) - Save/restore LTR info for suspend/resume (Bjorn Helgaas) * pci/aspm: PCI/ASPM: Save LTR Capability for suspend/resume PCI/ASPM: Use LTR if already enabled by platform
2019-02-09PCI/ASPM: Use LTR if already enabled by platformBjorn Helgaas
RussianNeuroMancer reported that the Intel 7265 wifi on a Dell Venue 11 Pro 7140 table stopped working after wakeup from suspend and bisected the problem to 9ab105deb60f ("PCI/ASPM: Disable ASPM L1.2 Substate if we don't have LTR"). David Ward reported the same problem on a Dell Latitude 7350. After af8bb9f89838 ("PCI/ACPI: Request LTR control from platform before using it"), we don't enable LTR unless the platform has granted LTR control to us. In addition, we don't notice if the platform had already enabled LTR itself. After 9ab105deb60f ("PCI/ASPM: Disable ASPM L1.2 Substate if we don't have LTR"), we avoid using LTR if we don't think the path to the device has LTR enabled. The combination means that if the platform itself enables LTR but declines to give the OS control over LTR, we unnecessarily avoided using ASPM L1.2. Link: https://bugzilla.kernel.org/show_bug.cgi?id=201469 Fixes: 9ab105deb60f ("PCI/ASPM: Disable ASPM L1.2 Substate if we don't have LTR") Fixes: af8bb9f89838 ("PCI/ACPI: Request LTR control from platform before using it") Reported-by: RussianNeuroMancer <russianneuromancer@ya.ru> Reported-by: David Ward <david.ward@ll.mit.edu> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v4.18+
2019-02-01PCI: Enable SERR# forwarding for all bridgesBharat Kumar Gogada
As per Figure 6-3 in PCIe r4.0, sec 6.2.6, ERR_ messages will be forwarded from the secondary interface to the primary interface, if the SERR# Enable bit in the Bridge Control register is set. It seems clear that an ACPI hotplug parameter method (_HPP or _HPX) that tells us to "enable SERR in the command register" (ACPI v6.2, sec 6.2.8, 6.2.9.1) refers to PCI_COMMAND_SERR, which enables reporting of errors by the function itself. For bridges, we also interpreted that to mean we should enable PCI_BRIDGE_CTL_SERR, which enables *forwarding* of errors by the bridge. But we didn't enable PCI_BRIDGE_CTL_SERR anywhere else, which means we never enabled it for non-ACPI systems or ACPI systems that didn't supply hotplug parameters. That means errors reported below bridges were often never forwarded up to a Root Port where they could be signaled via AER. Enable PCI_BRIDGE_CTL_SERR for all bridges so we can get better error reporting for downstream devices. Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-01-30PCI: Rely on config space header type, not class codeHonghui Zhang
The PCI configuration space header type tells us whether the device is a bridge, a CardBus bridge, or a normal device, and defines the layout of the rest of the header (PCI r3.0 sec 6.1, PCIe r4.0 sec 7.5.1.1.9). When we rely on the header format, e.g., when we're dealing with bridge windows, we should check the header type, not the class code. The class code is loosely related to the header type, but is often incorrect and the spec doesn't actually require it to be related to the header format. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> [bhelgaas: changelog, keep the PCI_CLASS_BRIDGE_HOST check] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>