summaryrefslogtreecommitdiff
path: root/drivers/pci/pci-acpi.c
AgeCommit message (Collapse)Author
2021-04-01PCI/ACPI: Fix acpi_pci_set_power_state() debug messageRafael J. Wysocki
If PCI_D3cold is passed to acpi_pci_set_power_state() as the second argument and there is no ACPI D3cold support for the given device, the debug message will state that the device power state has been changed to D3cold, while in fact it will be D3hot, because acpi_device_set_power() falls back to D3hot automatically if D3cold is not supported without returning an error. To address this issue, modify the debug message to print the current power state of the target PCI device's ACPI companion instead of printing the target power state, which may not reflect the real final power state of the device. Link: https://lore.kernel.org/r/4319486.LvFx2qVVIh@kreacher Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2020-12-15Merge tag 'pci-v5.11-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Decode PCIe 64 GT/s link speed (Gustavo Pimentel) - Remove unused HAVE_PCI_SET_MWI (Heiner Kallweit) - Reduce pci_set_cacheline_size() message to debug level (Heiner Kallweit) - Fix pci_slot_release() NULL pointer dereference (Jubin Zhong) - Unify ECAM constants in native PCI Express drivers (Krzysztof Wilczyński) - Return u8 from pci_find_capability() and similar (Puranjay Mohan) - Return u16 from pci_find_ext_capability() and similar (Bjorn Helgaas) - Fix ACPI companion lookup for device 0 on the root bus (Rafael J. Wysocki) Resource management: - Keep both device and resource name for config space remaps (Alexander Lobakin) - Bounds-check command-line resource alignment requests (Bjorn Helgaas) - Fix overflow in command-line resource alignment requests (Colin Ian King) Driver binding: - Avoid duplicate IDs in driver dynamic IDs list (Zhenzhong Duan) Power management: - Save/restore Precision Time Measurement Capability for suspend/resume (David E. Box) - Disable PTM during suspend to save power (David E. Box) - Add sysfs attribute for device power state (Maximilian Luz) - Rename pci_wakeup_bus() to pci_resume_bus() (Mika Westerberg) - Do not generate wakeup event when runtime resuming device (Mika Westerberg) - Save/restore ASPM L1SS Capability for suspend/resume (Vidya Sagar) Virtualization: - Mark AMD Raven iGPU ATS as broken in some platforms (Alex Deucher) - Add function 1 DMA alias quirk for Marvell 9215 SATA controller (Bjorn Helgaas) MSI: - Disable MSI for Pericom PCIe-USB adapter (Andy Shevchenko) - Improve warnings for 32-bit-limited MSI support (Vidya Sagar) Error handling: - Cache RCEC EA Capability offset in pci_init_capabilities() (Sean V Kelley) - Rename reset_link() to reset_subordinates() (Sean V Kelley) - Write AER Capability only when we control it (Sean V Kelley) - Clear AER status only when we control AER (Sean V Kelley) - Bind RCEC devices to the Root Port driver (Qiuxu Zhuo) - Recover from RCiEP AER errors (Qiuxu Zhuo) - Recover from RCEC AER errors (Sean V Kelley) - Add pcie_link_rcec() to associate RCiEPs (Sean V Kelley) - Add pcie_walk_rcec() to RCEC AER handling (Sean V Kelley) - Add pcie_walk_rcec() to RCEC PME handling (Sean V Kelley) - Add RCEC AER error injection support (Qiuxu Zhuo) Broadcom iProc PCIe controller driver: - Fix out-of-bound array accesses (Bharat Gooty) - Invalidate correct PAXB inbound windows (Roman Bacik) - Enhance PCIe Link information display (Srinath Mannam) Cadence PCIe controller driver: - Make "cdns,max-outbound-regions" property optional (Kishon Vijay Abraham I) Intel VMD host bridge driver: - Offset client MSI-X vectors (Jon Derrick) - Update type of __iomem pointers (Krzysztof Wilczyński) NVIDIA Tegra PCIe controller driver: - Move "dbi" accesses to post common DWC initialization (Vidya Sagar) - Read "dbi" base address to program in application logic (Vidya Sagar) - Fix ASPM-L1SS advertisement disable code (Vidya Sagar) - Set DesignWare IP version (Vidya Sagar) - Continue unconfig sequence even if parts fail (Vidya Sagar) - Check return value of tegra_pcie_init_controller() (Vidya Sagar) - Disable LTSSM during L2 entry (Vidya Sagar) Qualcomm PCIe controller driver: - Document PCIe bindings for SM8250 SoC (Manivannan Sadhasivam) - Add SM8250 SoC support (Manivannan Sadhasivam) - Add support for configuring BDF to SID mapping for SM8250 (Manivannan Sadhasivam) Renesas R-Car PCIe controller driver: - rcar: Drop unused members from struct rcar_pcie_host (Lad Prabhakar) - PCI: rcar-pci-host: Document r8a774e1 bindings (Lad Prabhakar) - PCI: rcar-pci-host: Convert bindings to json-schema (Yoshihiro Shimoda) - PCI: rcar-pci-host: Document r8a77965 bindings (Yoshihiro Shimoda) Samsung Exynos PCIe controller driver: - Rework driver to support Exynos5433 PCIe PHY (Jaehoon Chung) - Rework driver to support Exynos5433 variant (Jaehoon Chung) - Drop samsung,exynos5440-pcie binding (Marek Szyprowski) - Add the samsung,exynos-pcie binding (Marek Szyprowski) - Add the samsung,exynos-pcie-phy binding (Marek Szyprowski) Synopsys DesignWare PCIe controller driver: - Support multiple ATU memory regions (Rob Herring) - Move intel-gw ATU offset out of driver match data (Rob Herring) - Move "dbi", "dbi2", and "addr_space" resource setup into common code (Rob Herring) - Remove intel-gw unneeded function wrappers (Rob Herring) - Ensure all outbound ATU windows are reset (Rob Herring) - Use the common MSI irq_chip in dra7xx (Rob Herring) - Drop the .set_num_vectors() host op (Rob Herring) - Move MSI interrupt setup into DWC common code (Rob Herring) - Rework MSI initialization (Rob Herring) - Move link handling into common code (Rob Herring) - Move dw_pcie_msi_init() into core (Rob Herring) - Move dw_pcie_setup_rc() to DWC common code (Rob Herring) - Remove unnecessary wrappers around dw_pcie_host_init() (Rob Herring) - Drop keystone duplicated 'num-viewport'" (Rob Herring) - Move inbound and outbound windows to common struct (Rob Herring) - Detect number of iATU windows (Rob Herring) - Warn if non-prefetchable memory aperture size is > 32-bit (Vidya Sagar) - Add support to program ATU for >4GB memory (Vidya Sagar) - Set 32-bit DMA mask for MSI target address allocation (Vidya Sagar) TI J721E PCIe driver: - Fix "ti,syscon-pcie-ctrl" to take argument (Kishon Vijay Abraham I) - Add host mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham I) - Add EP mode dt-bindings for TI's J7200 SoC (Kishon Vijay Abraham I) - Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg (Kishon Vijay Abraham I) TI Keystone PCIe controller driver: - Enable compile-testing on !ARM (Alex Dewar)" * tag 'pci-v5.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (100 commits) PCI: Add function 1 DMA alias quirk for Marvell 9215 SATA controller PCI/ACPI: Fix companion lookup for device 0 on the root bus PCI: Keep both device and resource name for config space remaps PCI: xgene: Removed unused ".bus_shift" initialisers from pci-xgene.c PCI: vmd: Update type of the __iomem pointers PCI: iproc: Convert to use the new ECAM constants PCI: thunder-pem: Add constant for custom ".bus_shift" initialiser PCI: Unify ECAM constants in native PCI Express drivers PCI: Disable PTM during suspend to save power PCI/PTM: Save/restore Precision Time Measurement Capability for suspend/resume PCI: Mark AMD Raven iGPU ATS as broken in some platforms PCI: j721e: Get offset within "syscon" from "ti,syscon-pcie-ctrl" phandle arg dt-bindings: PCI: Add EP mode dt-bindings for TI's J7200 SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J7200 SoC dt-bindings: pci: ti,j721e: Fix "ti,syscon-pcie-ctrl" to take argument PCI: dwc: Set 32-bit DMA mask for MSI target address allocation PCI: qcom: Add support for configuring BDF to SID mapping for SM8250 PCI: Reduce pci_set_cacheline_size() message to debug level PCI: Remove unused HAVE_PCI_SET_MWI PCI: qcom: Add SM8250 SoC support ...
2020-12-11PCI/ACPI: Fix companion lookup for device 0 on the root busRafael J. Wysocki
In some cases acpi_pci_find_companion() returns an incorrect device object as the ACPI companion for device 0 on the root bus (bus 0). On the affected systems that device is the PCI interface to the host bridge and the "ACPI companion" returned for it corresponds to a non-PCI device located in the SoC (e.g. a sensor on an I2C bus). As a result of this, the ACPI device object "attached" to PCI device 00:00.0 cannot be used for enumerating the device that is really represented by it which (of course) is problematic. Address that issue by preventing acpi_pci_find_companion() from returning a device object with a valid _HID (which by the spec should not be present uder ACPI device objects corresponding to PCI devices) for PCI device 00:00.0. [bhelgaas: use pci_is_root_bus()] Link: https://lore.kernel.org/linux-acpi/1409ba0c-1580-dc09-e6fe-a0c9bcda6462@gmail.com/ Link: https://lore.kernel.org/r/4673285.9aE2nYKHPr@kreacher Reported-by: Daniel Scally <djrscally@gmail.com> Tested-by: Daniel Scally <djrscally@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Daniel Scally <djrscally@gmail.com>
2020-12-07PM: ACPI: PCI: Drop acpi_pm_set_bridge_wakeup()Rafael J. Wysocki
The idea behind acpi_pm_set_bridge_wakeup() was to allow bridges to be reference counted for wakeup enabling, because they may be enabled to signal wakeup on behalf of their subordinate devices and that may happen for multiple times in a row, whereas for the other devices it only makes sense to enable wakeup signaling once. However, this becomes problematic if the bridge itself is suspended, because it is treated as a "regular" device in that case and the reference counting doesn't work. For instance, suppose that there are two devices below a bridge and they both can signal wakeup. Every time one of them is suspended, wakeup signaling is enabled for the bridge, so when they both have been suspended, the bridge's wakeup reference counter value is 2. Say that the bridge is suspended subsequently and acpi_pci_wakeup() is called for it. Because the bridge can signal wakeup, that function will invoke acpi_pm_set_device_wakeup() to configure it and __acpi_pm_set_device_wakeup() will be called with the last argument equal to 1. This causes __acpi_device_wakeup_enable() invoked by it to omit the reference counting, because the reference counter of the target device (the bridge) is 2 at that time. Now say that the bridge resumes and one of the device below it resumes too, so the bridge's reference counter becomes 0 and wakeup signaling is disabled for it, but there is still the other suspended device which may need the bridge to signal wakeup on its behalf and that is not going to work. To address this scenario, use wakeup enable reference counting for all devices, not just for bridges, so drop the last argument from __acpi_device_wakeup_enable() and __acpi_pm_set_device_wakeup(), which causes acpi_pm_set_device_wakeup() and acpi_pm_set_bridge_wakeup() to become identical, so drop the latter and use the former instead of it everywhere. Fixes: 1ba51a7c1496 ("ACPI / PCI / PM: Rework acpi_pci_propagate_wakeup()") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
2020-10-22Merge tag 'pci-v5.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Print IRQ number used by PCIe Link Bandwidth Notification (Dongdong Liu) - Add schedule point in pci_read_config() to reduce max latency (Jiang Biao) - Add Kconfig options for MPS/MRRS strategy (Jim Quinlan) Resource management: - Fix pci_iounmap() memory leak when !CONFIG_GENERIC_IOMAP (Lorenzo Pieralisi) PCIe native device hotplug: - Reduce noisiness on hot removal (Lukas Wunner) Power management: - Revert "PCI/PM: Apply D2 delay as milliseconds, not microseconds" that was done on the basis of spec typo (Bjorn Helgaas) - Rename pci_dev.d3_delay to d3hot_delay to remove D3hot/D3cold ambiguity (Krzysztof Wilczyński) - Remove unused pcibios_pm_ops (Vaibhav Gupta) IOMMU: - Enable Translation Blocking for external devices to harden against DMA attacks (Rajat Jain) Error handling: - Add an ACPI APEI notifier chain for vendor CPER records to enable device-specific error handling (Shiju Jose) ASPM: - Remove struct aspm_register_info to simplify code (Saheed O. Bolarinwa) Amlogic Meson PCIe controller driver: - Build as module by default (Kevin Hilman) Ampere Altra PCIe controller driver: - Add MCFG quirk to work around non-standard ECAM implementation (Tuan Phan) Broadcom iProc PCIe controller driver: - Set affinity mask on MSI interrupts (Mark Tomlinson) Broadcom STB PCIe controller driver: - Make PCIE_BRCMSTB depend on ARCH_BRCMSTB (Jim Quinlan) - Add DT bindings for more Brcmstb chips (Jim Quinlan) - Add bcm7278 register info (Jim Quinlan) - Add bcm7278 PERST# support (Jim Quinlan) - Add suspend and resume pm_ops (Jim Quinlan) - Add control of rescal reset (Jim Quinlan) - Set additional internal memory DMA viewport sizes (Jim Quinlan) - Accommodate MSI for older chips (Jim Quinlan) - Set bus max burst size by chip type (Jim Quinlan) - Add support for bcm7211, bcm7216, bcm7445, bcm7278 (Jim Quinlan) Freescale i.MX6 PCIe controller driver: - Use dev_err_probe() to reduce redundant messages (Anson Huang) Freescale Layerscape PCIe controller driver: - Enforce 4K DMA buffer alignment in endpoint test (Hou Zhiqiang) - Add DT compatible strings for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint support for ls1088a, ls2088a (Xiaowei Bao) - Add endpoint test support for lS1088a (Xiaowei Bao) - Add MSI-X support for ls1088a (Xiaowei Bao) HiSilicon HIP PCIe controller driver: - Handle HIP-specific errors via ACPI APEI (Yicong Yang) HiSilicon Kirin PCIe controller driver: - Return -EPROBE_DEFER if the GPIO isn't ready (Bean Huo) Intel VMD host bridge driver: - Factor out physical offset, bus offset, IRQ domain, IRQ allocation (Jon Derrick) - Use generic PCI PM correctly (Jon Derrick) Marvell Aardvark PCIe controller driver: - Fix compilation on s390 (Pali Rohár) - Implement driver 'remove' function and allow to build it as module (Pali Rohár) - Move PCIe reset card code to advk_pcie_train_link() (Pali Rohár) - Convert mvebu a3700 internal SMCC firmware return codes to errno (Pali Rohár) - Fix initialization with old Marvell's Arm Trusted Firmware (Pali Rohár) Microsoft Hyper-V host bridge driver: - Fix hibernation in case interrupts are not re-created (Dexuan Cui) NVIDIA Tegra PCIe controller driver: - Stop checking return value of debugfs_create() functions (Greg Kroah-Hartman) - Convert to use DEFINE_SEQ_ATTRIBUTE macro (Liu Shixin) Qualcomm PCIe controller driver: - Reset PCIe to work around Qsdk U-Boot issue (Ansuel Smith) Renesas R-Car PCIe controller driver: - Add DT documentation for r8a774a1, r8a774b1, r8a774e1 endpoints (Lad Prabhakar) - Add RZ/G2M, RZ/G2N, RZ/G2H IDs to endpoint test (Lad Prabhakar) - Add DT support for r8a7742 (Lad Prabhakar) Socionext UniPhier Pro5 controller driver: - Add DT descriptions of iATU register (host and endpoint) (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Add link up check in dw_child_pcie_ops.map_bus() (racy, but seems unavoidable) (Hou Zhiqiang) - Fix endpoint Header Type check so multi-function devices work (Hou Zhiqiang) - Skip PCIE_MSI_INTR0* programming if MSI is disabled (Jisheng Zhang) - Stop leaking MSI page in suspend/resume (Jisheng Zhang) - Add common iATU register support instead of keystone-specific code (Kunihiko Hayashi) - Major config space access and other cleanups in dwc core and drivers that use it (al, exynos, histb, imx6, intel-gw, keystone, kirin, meson, qcom, tegra) (Rob Herring) - Add multiple PFs support for endpoint (Xiaowei Bao) - Add MSI-X doorbell mode in endpoint mode (Xiaowei Bao) Miscellaneous: - Use fallthrough pseudo-keyword (Gustavo A. R. Silva) - Fix "0 used as NULL pointer" warnings (Gustavo Pimentel) - Fix "cast truncates bits from constant value" warnings (Gustavo Pimentel) - Remove redundant zeroing for sg_init_table() (Julia Lawall) - Use scnprintf(), not snprintf(), in sysfs "show" functions (Krzysztof Wilczyński) - Remove unused assignments (Krzysztof Wilczyński) - Fix "0 used as NULL pointer" warning (Krzysztof Wilczyński) - Simplify bool comparisons (Krzysztof Wilczyński) - Use for_each_child_of_node() and for_each_node_by_name() (Qinglang Miao) - Simplify return expressions (Qinglang Miao)" * tag 'pci-v5.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (147 commits) PCI: vmd: Update VMD PM to correctly use generic PCI PM PCI: vmd: Create IRQ allocation helper PCI: vmd: Create IRQ Domain configuration helper PCI: vmd: Create bus offset configuration helper PCI: vmd: Create physical offset helper PCI: v3-semi: Remove unneeded break PCI: dwc: Add link up check in dw_child_pcie_ops.map_bus() PCI/ASPM: Remove struct pcie_link_state.l1ss PCI/ASPM: Remove struct aspm_register_info.l1ss_cap PCI/ASPM: Pass L1SS Capabilities value, not struct aspm_register_info PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl1 PCI/ASPM: Remove struct aspm_register_info.l1ss_ctl2 (unused) PCI/ASPM: Remove struct aspm_register_info.l1ss_cap_ptr PCI/ASPM: Remove struct aspm_register_info.latency_encoding PCI/ASPM: Remove struct aspm_register_info.enabled PCI/ASPM: Remove struct aspm_register_info.support PCI/ASPM: Use 'parent' and 'child' for readability PCI/ASPM: Move LTR path check to where it's used PCI/ASPM: Move pci_clear_and_set_dword() earlier PCI: dwc: Fix MSI page leakage in suspend/resume ...
2020-10-06PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPILukas Wunner
Recent laptops with dual AMD GPUs fail to suspend the discrete GPU, thus causing lockups on system sleep and high power consumption at runtime. The discrete GPU would normally be suspended to D3cold by turning off ACPI _PR3 Power Resources of the Root Port above the GPU. However on affected systems, the Root Port is hotplug-capable and pci_bridge_d3_possible() only allows hotplug ports to go to D3 if they belong to a Thunderbolt device or if the Root Port possesses a "HotPlugSupportInD3" ACPI property. Neither is the case on affected laptops. The reason for whitelisting only specific, known to work hotplug ports for D3 is that there have been reports of SkyLake Xeon-SP systems raising Hardware Error NMIs upon suspending their hotplug ports: https://lore.kernel.org/linux-pci/20170503180426.GA4058@otc-nc-03/ But if a hotplug port is power manageable by ACPI (as can be detected through presence of Power Resources and corresponding _PS0 and _PS3 methods) then it ought to be safe to suspend it to D3. To this end, amend acpi_pci_bridge_d3() to whitelist such ports for D3. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1222 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1252 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1304 Reported-and-tested-by: Arthur Borsboom <arthurborsboom@gmail.com> Reported-and-tested-by: matoro <matoro@airmail.cc> Reported-by: Aaron Zakhrov <aaron.zakhrov@gmail.com> Reported-by: Michal Rostecki <mrostecki@suse.com> Reported-by: Shai Coleman <git@shaicoleman.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-29PCI/PM: Rename pci_dev.d3_delay to d3hot_delayKrzysztof Wilczyński
PCI devices support two variants of the D3 power state: D3hot (main power present) D3cold (main power removed). Previously struct pci_dev contained: unsigned int d3_delay; /* D3->D0 transition time in ms */ unsigned int d3cold_delay; /* D3cold->D0 transition time in ms */ "d3_delay" refers specifically to the D3hot state. Rename it to "d3hot_delay" to avoid ambiguity and align with the ACPI "_DSM for Specifying Device Readiness Durations" in the PCI Firmware spec r3.2, sec 4.6.9. There is no change to the functionality. Link: https://lore.kernel.org/r/20200730210848.1578826-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-08-07Merge tag 'pci-v5.9-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Fix pci_cfg_wait queue locking problem (Bjorn Helgaas) - Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi Saheed) - Align PCIe capability and PCI accessor return values (Bolarinwa Olayemi Saheed) - Fix pci_create_slot() reference count leak (Qiushi Wu) - Announce device after early fixups (Tiezhu Yang) PCI device hotplug: - Make rpadlpar functions static (Wei Yongjun) Driver binding: - Add device even if driver attach failed (Rajat Jain) Virtualization: - xen: Remove redundant initialization of irq (Colin Ian King) IOMMU: - Add pci_pri_supported() to check device or associated PF (Ashok Raj) - Release IVRS table in AMD ACS quirk (Hanjun Guo) - Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng) - Treat "external-facing" devices themselves as internal (Rajat Jain) MSI: - Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr Stankiewicz) Error handling: - Clear PCIe Device Status errors only if OS owns AER (Jonathan Cameron) - Log correctable errors as warning, not error (Matt Jolly) - Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc Van Oostenryck) Peer-to-peer DMA: - Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe) ASPM: - Add missing newline in sysfs 'policy' (Xiongfeng Wang) Native PCIe controllers: - Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng) - Convert to devm_platform_ioremap_resource() (Dejin Zheng) - Remove duplicate error message from devm_pci_remap_cfg_resource() callers (Dejin Zheng) - Fix runtime PM imbalance on error (Dinghao Liu) - Remove dev_err() when handing an error from platform_get_irq() (Krzysztof Wilczyński) - Use pci_host_bridge.windows list directly instead of splicing in a temporary list for cadence, mvebu, host-common (Rob Herring) - Use pci_host_probe() instead of open-coding all the pieces for altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3, versatile, xgene, xilinx, xilinx-nwl (Rob Herring) - Default host bridge parent device to the platform device (Rob Herring) - Use pci_is_root_bus() instead of tracking root bus number separately in aardvark, designware (imx6, keystone, designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob Herring) - Set host bridge bus number in pci_scan_root_bus_bridge() instead of each driver for aardvark, designware-host, host-common, mediatek, rcar, tegra, v3-semi (Rob Herring) - Move DT resource setup into devm_pci_alloc_host_bridge() (Rob Herring) - Set bridge map_irq and swizzle_irq to default functions; drivers that don't support legacy IRQs (iproc) need to undo this (Rob Herring) ARM Versatile PCIe controller driver: - Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring) Cadence PCIe controller driver: - Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property (Kishon Vijay Abraham I) - Remove "mem" from reg binding (Kishon Vijay Abraham I) - Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I) - Convert all r/w accessors to perform only 32-bit accesses (Kishon Vijay Abraham I) - Add support to start link and verify link status (Kishon Vijay Abraham I) - Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I) - Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I) - Fix updating Vendor ID and Subsystem Vendor ID register (Kishon Vijay Abraham I) - Use bridge resources for outbound window setup (Rob Herring) - Remove private bus number and range storage (Rob Herring) Cadence PCIe endpoint driver: - Add MSI-X support (Alan Douglas) HiSilicon PCIe controller driver: - Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring) Intel VMD host bridge driver: - Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick) Loongson PCIe controller driver: - Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang) Marvell Aardvark PCIe controller driver: - Indicate error in 'val' when config read fails (Pali Rohár) - Don't touch PCIe registers if no card connected (Pali Rohár) Marvell MVEBU PCIe controller driver: - Setup BAR0 in order to fix MSI (Shmuel Hazan) Microsoft Hyper-V host bridge driver: - Fix a timing issue which causes kdump to fail occasionally (Wei Hu) - Make some functions static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Revert tegra124 raw_violation_fixup (Nicolas Chauvet) - Remove PLL power supplies (Thierry Reding) Qualcomm PCIe controller driver: - Change duplicate PCI reset to phy reset (Abhishek Sahu) - Add missing ipq806x clocks in PCIe driver (Ansuel Smith) - Add missing reset for ipq806x (Ansuel Smith) - Add ext reset (Ansuel Smith) - Use bulk clk API and assert on error (Ansuel Smith) - Add support for tx term offset for rev 2.1.0 (Ansuel Smith) - Define some PARF params needed for ipq8064 SoC (Ansuel Smith) - Add ipq8064 rev2 variant (Ansuel Smith) - Support PCI speed set for ipq806x (Sham Muthayyan) Renesas R-Car PCIe controller driver: - Use devm_pci_alloc_host_bridge() (Rob Herring) - Use struct pci_host_bridge.windows list directly (Rob Herring) - Convert rcar-gen2 to use modern host bridge probe functions (Rob Herring) TI J721E PCIe driver: - Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I) Xilinx Versal CPM PCIe controller driver: - Add Versal CPM Root Port driver and YAML schema (Bharat Kumar Gogada) MicroSemi Switchtec management driver: - Add missing __iomem and __user tags to fix sparse warnings (Logan Gunthorpe) Miscellaneous: - Replace http:// links with https:// (Alexander A. Klimov) - Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn Helgaas) - Remove unused pci_lost_interrupt() (Heiner Kallweit) - Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen) - Fix kerneldoc warnings (Krzysztof Kozlowski)" * tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits) PCI: Fix kerneldoc warnings PCI: xilinx-cpm: Add Versal CPM Root Port driver PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port PCI: Set bridge map_irq and swizzle_irq to default functions PCI: Move DT resource setup into devm_pci_alloc_host_bridge() PCI: rcar-gen2: Convert to use modern host bridge probe functions PCI: Remove dev_err() when handing an error from platform_get_irq() MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe misc: pci_endpoint_test: Add J721E in pci_device_id table PCI: j721e: Add TI J721E PCIe driver PCI: switchtec: Add missing __iomem tag to fix sparse warnings PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings PCI: rpadlpar: Make functions static PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs PCI: Release IVRS table in AMD ACS quirk PCI: Announce device after early fixups PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken PCI: Remove unused pci_lost_interrupt() dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC ...
2020-07-10PCI: Treat "external-facing" devices themselves as internalRajat Jain
"External-facing" devices are internal devices that expose PCIe hierarchies such as Thunderbolt outside the platform [1]. Previously these internal devices were marked as "untrusted" the same as devices downstream from them. Use the ACPI or DT information to identify external-facing devices, but only mark the devices *downstream* from them as "untrusted" [2]. The external-facing device itself is no longer marked as untrusted. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-externally-exposed-pcie-root-ports [2] https://lore.kernel.org/linux-pci/20200610230906.GA1528594@bjorn-Precision-5520/ Link: https://lore.kernel.org/r/20200707224604.3737893-3-rajatja@google.com Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-07-09ACPI: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. Link: https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through # [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-05-27PCI: Rename _DSM constants to align with specKrzysztof Wilczyński
Rename PCI-related _DSM constants to align them with the PCI Firmware Spec, r3.2, sec 4.6. No functional change intended. Link: https://lore.kernel.org/r/20200526213905.2479381-1-kw@linux.com Signed-off-by: Krzysztof Wilczyński <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2020-05-14PCI: Unify pcie_find_root_port() and pci_find_pcie_root_port()Yicong Yang
Previously we used pcie_find_root_port() to find a Root Port from a PCIe device and pci_find_pcie_root_port() to find a Root Port from a Conventional PCI device. Unify the two functions and use pcie_find_root_port() to find a Root Port from either a Conventional PCI device or a PCIe device. Then there is no need to distinguish the type of the device. Link: https://lore.kernel.org/r/1589019568-5216-1-git-send-email-yangyicong@hisilicon.com Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # thunderbolt
2020-04-02Merge branch 'pci/misc'Bjorn Helgaas
- Move _HPX type array from stack to static data (Colin Ian King) - Avoid an ASMedia XHCI USB PME# defect; apparently it doesn't assert PME# when USB3.0 devices are hotplugged in D0 (Kai-Heng Feng) - Revert sysfs "rescan" file renames that broke an application (Kelsey Skunberg) * pci/misc: PCI: sysfs: Revert "rescan" file renames PCI: Avoid ASMedia XHCI USB PME# from D0 defect PCI/ACPI: Move pcie_to_hpx3_type[] from stack to static data
2020-03-28PCI/DPC: Add Error Disconnect Recover (EDR) supportKuppuswamy Sathyanarayanan
Error Disconnect Recover (EDR) is a feature that allows ACPI firmware to notify OSPM that a device has been disconnected due to an error condition (ACPI v6.3, sec 5.6.6). OSPM advertises its support for EDR on PCI devices via _OSC (see [1], sec 4.5.1, table 4-4). The OSPM EDR notify handler should invalidate software state associated with disconnected devices and may attempt to recover them. OSPM communicates the status of recovery to the firmware via _OST (sec 6.3.5.2). For PCIe, firmware may use Downstream Port Containment (DPC) to support EDR. Per [1], sec 4.5.1, table 4-6, even if firmware has retained control of DPC, OSPM may read/write DPC control and status registers during the EDR notification processing window, i.e., from the time it receives an EDR notification until it clears the DPC Trigger Status. Note that per [1], sec 4.5.1 and 4.5.2.4, 1. If the OS supports EDR, it should advertise that to firmware by setting OSC_PCI_EDR_SUPPORT in _OSC Support. 2. If the OS sets OSC_PCI_EXPRESS_DPC_CONTROL in _OSC Control to request control of the DPC capability, it must also set OSC_PCI_EDR_SUPPORT in _OSC Support. Add an EDR notify handler to attempt recovery. [1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 [bhelgaas: squash add/enable patches into one] Link: https://lore.kernel.org/r/90f91fe6d25c13f9d2255d2ce97ca15be307e1bb.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org>
2020-02-10PCI/ACPI: Move pcie_to_hpx3_type[] from stack to static dataColin Ian King
Move pcie_to_hpx3_type[] from the stack to static data. This reduces stack usage and also makes the object code slightly smaller. Link: https://lore.kernel.org/r/20200210085256.319424-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-09-23Merge branch 'pci/enumeration'Bjorn Helgaas
- Consolidate _HPP & _HPX code in pci-acpi.h and remove unnecessary struct hotplug_program_ops (Krzysztof Wilczynski) - Fixup PCIe device types to remove the need for dev->has_secondary_link (Mika Westerberg) * pci/enumeration: PCI: Get rid of dev->has_secondary_link flag PCI: Make pcie_downstream_port() available outside of access.c PCI/ACPI: Remove unnecessary struct hotplug_program_ops PCI/ACPI: Move _HPP & _HPX functions to pci-acpi.c PCI/ACPI: Rename _HPX structs from hpp_* to hpx_*
2019-08-28PCI/ACPI: Remove unnecessary struct hotplug_program_opsKrzysztof Wilczynski
Move the ACPI-specific structs hpx_type0, hpx_type1, hpx_type2 and hpx_type3 to drivers/pci/pci-acpi.c as they are not used anywhere else. Then remove the struct hotplug_program_ops that has been shared between drivers/pci/probe.c and drivers/pci/pci-acpi.c from drivers/pci/pci.h as it is no longer needed. The struct hotplug_program_ops was added by 87fcf12e846a ("PCI/ACPI: Remove the need for 'struct hotplug_params'") and replaced previously used struct hotplug_params enabling the support for the _HPX Type 3 Setting Record that was added by f873c51a155a ("PCI/ACPI: Implement _HPX Type 3 Setting Record"). The new struct allowed for the static functions such program_hpx_type0(), program_hpx_type1(), etc., from the drivers/pci/probe.c to be called from the function pci_acpi_program_hp_params() in the drivers/pci/pci-acpi.c. Previously a programming of _HPX Type 0 was as follows: drivers/pci/probe.c: program_hpx_type0() ... pci_configure_device() hp_ops = { .program_type0 = program_hpx_type0, ... } pci_acpi_program_hp_params(&hp_ops) drivers/pci/pci-acpi.c: pci_acpi_program_hp_params(&hp_ops) acpi_run_hpx(hp_ops) decode_type0_hpx_record() hp_ops->program_type0 # program_hpx_type0() called via hp_ops After the ACPI-specific functions, structs, enums, etc., have been moved to drivers/pci/pci-acpi.c there is no need for the hotplug_program_ops as all of the _HPX Type 0, 1, 2 and 3 are directly accessible. Link: https://lore.kernel.org/r/20190827094951.10613-4-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-28PCI/ACPI: Move _HPP & _HPX functions to pci-acpi.cKrzysztof Wilczynski
Move program_hpx_type0(), program_hpx_type1(), etc., and enums hpx_type3_dev_type, hpx_type3_fn_type and hpx_type3_cfg_loc to drivers/pci/pci-acpi.c as these functions and enums are ACPI-specific. Move structs hpx_type0, hpx_type1, hpx_type2 and hpx_type3 to drivers/pci/pci.h as these are shared between drivers/pci/pci-acpi.c and drivers/pci/probe.c. Link: https://lore.kernel.org/r/20190827094951.10613-3-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-28PCI/ACPI: Rename _HPX structs from hpp_* to hpx_*Krzysztof Wilczynski
The names of the hpp_type0, hpp_type1 and hpp_type2 structs suggest that they're related to _HPP, when in fact they're related to _HPX. The struct hpp_type0 denotes an _HPX Type 0 setting record that supersedes the _HPP setting record, and it has been used interchangeably for _HPP as per the ACPI specification (see version 6.3, section 6.2.9.1) which states that it should be applied to PCI, PCI-X and PCI Express devices, with settings being ignored if they are not applicable. Rename them to hpx_type0, hpx_type1 and hpx_type2 to reflect their relation to _HPX rather than _HPP. Link: https://lore.kernel.org/r/20190827094951.10613-2-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-28PCI: Move ASPM declarations to linux/pci.hKrzysztof Wilczynski
Move ASPM definitions and function prototypes from include/linux/pci-aspm.h to include/linux/pci.h so users only need to include <linux/pci.h>: PCIE_LINK_STATE_L0S PCIE_LINK_STATE_L1 PCIE_LINK_STATE_CLKPM pci_disable_link_state() pci_disable_link_state_locked() pcie_no_aspm() No functional changes intended. Link: https://lore.kernel.org/r/20190827095620.11213-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-06-27PCI: PM/ACPI: Refresh all stale power state data in pci_pm_complete()Rafael J. Wysocki
In pci_pm_complete() there are checks to decide whether or not to resume devices that were left in runtime-suspend during the preceding system-wide transition into a sleep state. They involve checking the current power state of the device and comparing it with the power state of it set before the preceding system-wide transition, but the platform component of the device's power state is not handled correctly in there. Namely, on platforms with ACPI, the device power state information needs to be updated with care, so that the reference counters of power resources used by the device (if any) are set to ensure that the refreshed power state of it will be maintained going forward. To that end, introduce a new ->refresh_state() platform PM callback for PCI devices, for asking the platform to refresh the device power state data and ensure that the corresponding power state will be maintained going forward, make it invoke acpi_device_update_power() (for devices with ACPI PM) on platforms with ACPI and make pci_pm_complete() use it, through a new pci_refresh_power_state() wrapper function. Fixes: a0d2a959d3da (PCI: Avoid unnecessary resume after direct-complete) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-06-27PCI / ACPI: Add _PR0 dependent devicesMika Westerberg
If otherwise unrelated PCI devices share ACPI power resources turning them on causes the devices to enter D0uninitialized power state which may cause problems. For example in Intel Ice Lake two root ports (RP0 and RP1), Thunderbolt controller (NHI) and xHCI controller all share power resources as can be ween in the topology below where power resources are marked with []: Host bridge | +- RP0 ---\ +- RP1 ---|--+--> [TBT] +- NHI --/ | | | | v +- xHCI --> [D3C] In a situation where all devices sharing the power resources are in D3cold (the power resources are turned off) and for example the Thunderbolt controller is runtime resumed resulting that the power resources are turned on. This means that the other devices sharing them (RP0, RP1 and xHCI) are transitioned into D0uninitialized state. If they were configured to trigger wake (PME) on a certain event that configuration gets lost after reset so we would need to re-initialize them to get the wakeup working as expected again. To do so we would need to runtime resume all of them to make sure their registers get restored properly before we can runtime suspend them again. Since we just added concept of "_PR0 dependent device" we can solve this by calling the relevant add/remove functions when the PCI device is bind to its ACPI representation. If it has power resources the PCI device will be added as dependent device to them and runtime resumed whenever they are physically turned on. This should make sure PCI core can reconfigure wakes after the device is transitioned into D0uninitialized. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-06-27PCI / ACPI: Use cached ACPI device state to get PCI device power stateMika Westerberg
The ACPI power state returned by acpi_device_get_power() may depend on the configuration of ACPI power resources in the system which may change any time after acpi_device_get_power() has returned, unless the reference counters of the ACPI power resources in question are set to prevent that from happening. Thus it is invalid to use acpi_device_get_power() in acpi_pci_get_power_state() the way it is done now and the value of the ->power.state field in the corresponding struct acpi_device objects (which reflects the ACPI power resources reference counting, among other things) should be used instead. As an example where this becomes an issue is Intel Ice Lake where the Thunderbolt controller (NHI), two PCIe root ports (RP0 and RP1) and xHCI all share the same power resources. The following picture with power resources marked with [] shows the topology: Host bridge | +- RP0 ---\ +- RP1 ---|--+--> [TBT] +- NHI --/ | | | | v +- xHCI --> [D3C] Here TBT and D3C are the shared ACPI power resources. ACPI _PR3() method of the devices in question returns either TBT or D3C or both. Say we runtime suspend first the root ports RP0 and RP1, then NHI. Now since the TBT power resource is still on when the root ports are runtime suspended their dev->current_state is set to D3hot. When NHI is runtime suspended TBT is finally turned off but state of the root ports remain to be D3hot. Now when the xHCI is runtime suspended D3C gets also turned off. PCI core thus has power states of these devices cached in their dev->current_state as follows: RP0 -> D3hot RP1 -> D3hot NHI -> D3cold xHCI -> D3cold If the user now runs lspci for instance, the result is all 1's like in the below output (00:07.0 is the first root port, RP0): 00:07.0 PCI bridge: Intel Corporation Device 8a1d (rev ff) (prog-if ff) !!! Unknown header type 7f Kernel driver in use: pcieport In short the hardware state is not in sync with the software state anymore. The exact same thing happens with the PME polling thread which ends up bringing the root ports back into D0 after they are runtime suspended. For this reason, modify acpi_pci_get_power_state() so that it uses the ACPI device power state that was cached by the ACPI core. This makes the PCI device power state match the ACPI device power state regardless of state of the shared power resources which may still be on at this point. Link: https://lore.kernel.org/r/20190618161858.77834-2-mika.westerberg@linux.intel.com Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-05-27ACPI/PCI: PM: Add missing wakeup.flags.valid checksRafael J. Wysocki
Both acpi_pci_need_resume() and acpi_dev_needs_resume() check if the current ACPI wakeup configuration of the device matches what is expected as far as system wakeup from sleep states is concerned, as reflected by the device_may_wakeup() return value for the device. However, they only should do that if wakeup.flags.valid is set for the device's ACPI companion, because otherwise the wakeup.prepare_count value for it is meaningless. Add the missing wakeup.flags.valid checks to these functions. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-05-13Merge branch 'pci/printk'Bjorn Helgaas
* pci/printk: PCI: Replace dev_printk(KERN_DEBUG) with dev_info(), etc PCI: Replace printk(KERN_INFO) with pr_info(), etc PCI: Use dev_printk() when possible
2019-05-09PCI: Replace printk(KERN_INFO) with pr_info(), etcMohan Kumar
Replace printk() with pr_*() to be more consistent with other logging and avoid checkpatch warnings. Link: https://lore.kernel.org/lkml/1555733026-19609-1-git-send-email-mohankumar718@gmail.com Link: https://lore.kernel.org/lkml/1555733130-19804-1-git-send-email-mohankumar718@gmail.com Signed-off-by: Mohan Kumar <mohankumar718@gmail.com> [bhelgaas: squash in similar changes from second patch in series] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-04-23PCI/ACPI: Implement _HPX Type 3 Setting RecordAlexandru Gagniuc
The _HPX Type 3 Setting Record is intended to be more generic and allow configuration of settings not possible with Type 2 records. For example, firmware could ensure that the completion timeout value is set accordingly throughout the PCI tree. Implement support for _HPX Type 3 Setting Records, which were added in the ACPI 6.3 spec. Link: https://lore.kernel.org/lkml/20190208162414.3996-4-mr.nuke.me@gmail.com Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-04-23PCI/ACPI: Remove the need for 'struct hotplug_params'Alexandru Gagniuc
We used to first parse all the _HPP and _HPX tables before using the information to program registers of PCIe devices. Up through HPX Type 2, there was only one structure of each type, so we could cheat and store it on the stack. With HPX Type 3 we get an arbitrary number of entries, so the above model doesn't scale that well. Instead of parsing all tables at once, parse and program each entry separately. For _HPP and _HPX Types 0 through 2, this is functionally equivalent. The change enables the upcoming _HPX Type 3 to integrate more easily. Link: https://lore.kernel.org/lkml/20190208162414.3996-3-mr.nuke.me@gmail.com Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [bhelgaas: fix build errors] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-04-23PCI/ACPI: Do not export pci_get_hp_params()Alexandru Gagniuc
pci_get_hp_params() is only used within drivers/pci, and there is no reason to make it available outside of the PCI core, so stop exporting it. Link: https://lore.kernel.org/lkml/20190208162414.3996-2-mr.nuke.me@gmail.com Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-12-05PCI / ACPI: Identify untrusted PCI devicesMika Westerberg
A malicious PCI device may use DMA to attack the system. An external Thunderbolt port is a convenient point to attach such a device. The OS may use IOMMU to defend against DMA attacks. Some BIOSes mark these externally facing root ports with this ACPI _DSD [1]: Name (_DSD, Package () { ToUUID ("efcc06cc-73ac-4bc3-bff0-76143807c389"), Package () { Package () {"ExternalFacingPort", 1}, Package () {"UID", 0 } } }) If we find such a root port, mark it and all its children as untrusted. The rest of the OS may use this information to enable DMA protection against malicious devices. For instance the device may be put behind an IOMMU to keep it from accessing memory outside of what the driver has allocated for it. While at it, add a comment on top of prp_guids array explaining the possible caveat resulting when these GUIDs are treated equivalent. [1] https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-externally-exposed-pcie-root-ports Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2018-11-13Revert "ACPI/PCI: Pay attention to device-specific _PXM node values"Bjorn Helgaas
This reverts commit bad7dcd94f3956bcfc0a69ef71fdf0fcca3de4a8. bad7dcd94f39 ("ACPI/PCI: Pay attention to device-specific _PXM node values") caused boot failures (no console output at all) for Martin [1] and Ingo [2] on AMD ThreadRipper systems. Revert the commit until we figure out how to safely use these device-specific _PXM values. [1] https://lore.kernel.org/linux-pci/20180912152140.3676-2-Jonathan.Cameron@huawei.com [2] https://lore.kernel.org/linux-pci/20181113071712.GA2353@gmail.com Fixes: bad7dcd94f39 ("ACPI/PCI: Pay attention to device-specific _PXM node values") Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-20Merge branch 'pci/misc'Bjorn Helgaas
- Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) * pci/misc: PCI: pcie: Remove redundant 'default n' from Kconfig NTB: switchtec_ntb: Update switchtec documentation with prerequisites for NTB PCI: Fix Switchtec DMA aliasing quirk dmesg noise PCI: Add macro for Switchtec quirk declarations PCI: Add Device IDs for Intel GPU "spurious interrupt" quirk PCI: Remove pci_set_dma_max_seg_size() PCI: Remove pci_set_dma_seg_boundary() PCI: Remove pci_unmap_addr() wrappers for DMA API PCI / ACPI: Mark expected switch fall-through PCI: Remove set but unused variable PCI: Fix pci.c kernel-doc parameter warning PCI: Allocate dma_alias_mask with bitmap_zalloc() PCI: Remove unused NFP32xx IDs
2018-10-20Merge branch 'pci/hotplug'Bjorn Helgaas
- Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) * pci/hotplug: PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI/AER: Use threaded IRQ for bottom half PCI/AER: Use kfifo_in_spinlocked() to insert locked elements PCI/AER: Use kfifo for tracking events instead of reimplementing it PCI/AER: Remove error source from AER struct aer_rpc PCI/AER: Remove unused aer_error_resume() PCI: Uninline PCI bus accessors for better ftracing PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() calls PCI: pnv_php: Use kmemdup() PCI: cpqphp: Remove set but not used variable 'physical_slot' PCI/ERR: Remove duplicated include from err.c PCI: Equalize hotplug memory and io for occupied and empty slots PCI / ACPI: Whitelist D3 for more PCIe hotplug ports ACPI / property: Allow multiple property compatible _DSD entries PCI/PME: Implement runtime PM callbacks PCI: pciehp: Implement runtime PM callbacks PCI/portdrv: Add runtime PM hooks for port service drivers PCI/portdrv: Resume upon exit from system suspend if left runtime suspended PCI: pciehp: Do not handle events if interrupts are masked PCI: pciehp: Disable hotplug interrupt during suspend PCI / ACPI: Enable wake automatically for power managed bridges PCI: Do not skip power-managed bridges in pci_enable_wake() PCI: Make link active reporting detection generic PCI: Unify device inaccessible PCI/ERR: Always report current recovery status for udev PCI/ERR: Simplify broadcast callouts PCI/ERR: Run error recovery callbacks for all affected devices PCI/ERR: Handle fatal error recovery PCI/ERR: Use slot reset if available PCI/AER: Don't read upstream ports below fatal errors PCI/AER: Take reference on error devices PCI/DPC: Save and restore config state PCI: portdrv: Restore PCI config state on slot reset PCI: portdrv: Initialize service drivers directly PCI: hotplug: Document TODOs PCI: hotplug: Embed hotplug_slot PCI: hotplug: Drop hotplug_slot_info PCI: hotplug: Constify hotplug_slot_ops PCI: pciehp: Reshuffle controller struct for clarity PCI: pciehp: Rename controller struct members for clarity PCI: pciehp: Unify controller and slot structs PCI: pciehp: Tolerate Presence Detect hardwired to zero PCI: pciehp: Drop hotplug_slot_ops wrappers PCI: pciehp: Drop unnecessary includes PCI: pciehp: Differentiate between surprise and safe removal PCI: Simplify disconnected marking
2018-10-04PCI / ACPI: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1472052 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-02PCI / ACPI: Whitelist D3 for more PCIe hotplug portsMika Westerberg
In order to have better power management for Thunderbolt PCIe chains, Windows enables power management for native PCIe hotplug ports if there is the following ACPI _DSD attached to the root port: Name (_DSD, Package () { ToUUID ("6211e2c0-58a3-4af3-90e1-927a4e0c55a4"), Package () { Package () {"HotPlugSupportInD3", 1} } }) This is also documented in: https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-pcie-root-ports-supporting-hot-plug-in-d3 Do the same in Linux by introducing new firmware PM callback (->bridge_d3()) and then implement it for ACPI based systems so that the above property is checked. There is one catch, though. The initial pci_dev->bridge_d3 is set before the root port has ACPI companion bound (the device is not added to the PCI bus either) so we need to look up the ACPI companion manually in that case in acpi_pci_bridge_d3(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-02PCI / ACPI: Enable wake automatically for power managed bridgesMika Westerberg
We enable power management automatically for bridges where pci_bridge_d3_possible() returns true. However, these bridges may have ACPI methods such as _DSW that need to be called before D3 entry. For example in Lenovo Thinkpad X1 Carbon 6th _DSW method is used to prepare D3cold for the PCIe root port hosting Thunderbolt chain. Because wake is not enabled _DSW method is never called and the port does not enter D3cold properly consuming more power than necessary. Users can work this around by writing "enabled" to "wakeup" sysfs file under the device in question but that is not something an ordinary user is expected to do. Since we already automatically enable power management for PCIe ports with ->bridge_d3 set extend that to enable wake for them as well, assuming the port has any ACPI wakeup related objects implemented in the namespace (adev->wakeup.flags.valid is true). This ensures the necessary ACPI methods get called at appropriate times and allows the root port in Thinkpad X1 Carbon 6th to go into D3cold. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-09-17ACPI/PCI: Pay attention to device-specific _PXM node valuesJonathan Cameron
The ACPI specification allows you to provide _PXM entries for devices based on their location on a particular bus. Let us use that if it is provided rather than just assuming it makes sense to put the device into the proximity domain of the root. An example DSDT entry that will supply this is: Device (PCI2) { Name (_HID, "PNP0A08") // PCI Express Root Bridge Name (_CID, "PNP0A03") // Compatible PCI Root Bridge Name(_SEG, 2) // Segment of this Root complex Name(_BBN, 0xF8) // Base Bus Number Name(_CCA, 1) Method (_PXM, 0, NotSerialized) { Return(0x00) } ... Device (BRI0) { Name (_HID, "19E51610") Name (_ADR, 0) Name (_BBN, 0xF9) Device (CAR0) { Name (_HID, "97109912") Name (_ADR, 0) Method (_PXM, 0, NotSerialized) { Return(0x02) } } } } Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-08-22Merge tag 'pm-4.19-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These fix the main idle loop and the menu cpuidle governor, clean up the latter, fix a mistake in the PCI bus type's support for system suspend and resume, fix the ondemand and conservative cpufreq governors, address a build issue in the system wakeup framework and make the ACPI C-states desciptions less confusing. Specifics: - Make the idle loop handle stopped scheduler tick correctly (Rafael Wysocki). - Prevent the menu cpuidle governor from letting CPUs spend too much time in shallow idle states when it is invoked with scheduler tick stopped and clean it up somewhat (Rafael Wysocki). - Avoid invoking the platform firmware to make the platform enter the ACPI S3 sleep state with suspended PCIe root ports which may confuse the firmware and cause it to crash (Rafael Wysocki). - Fix sysfs-related race in the ondemand and conservative cpufreq governors which may cause the system to crash if the governor module is removed during an update of CPU frequency limits (Henry Willard). - Select SRCU when building the system wakeup framework to avoid a build issue in it (zhangyi). - Make the descriptions of ACPI C-states vendor-neutral to avoid confusion (Prarit Bhargava)" * tag 'pm-4.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: menu: Handle stopped tick more aggressively sched: idle: Avoid retaining the tick when it has been stopped PCI / ACPI / PM: Resume all bridges on suspend-to-RAM cpuidle: menu: Update stale polling override comment cpufreq: governor: Avoid accessing invalid governor_data x86/ACPI/cstate: Make APCI C1 FFH MWAIT C-state description vendor-neutral cpuidle: menu: Fix white space PM / sleep: wakeup: Fix build error caused by missing SRCU support
2018-08-17PCI / ACPI / PM: Resume all bridges on suspend-to-RAMRafael J. Wysocki
Commit 26112ddc254c (PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM) attempted to fix a functional regression resulting from commit c62ec4610c40 (PM / core: Fix direct_complete handling for devices with no callbacks) by resuming PCI bridges without drivers (that is, "parallel PCI" ones) during system-wide suspend if the target system state is not ACPI S0 (working state). That turns out insufficient, however, as it is reported that, at least in one case, the platform firmware gets confused if a PCIe root port is suspended before entering the ACPI S3 sleep state. That issue was exposed by commit 77b3729ca03 (PCI / PM: Use SMART_SUSPEND and LEAVE_SUSPENDED flags for PCIe ports) that allowed PCIe ports to stay in runtime suspend during system-wide suspend (which is OK for suspend-to-idle, but turns out to be problematic otherwise). For this reason, drop the driver check from acpi_pci_need_resume() and resume all bridges (including PCIe ports with drivers) during system-wide suspend if the target system state is not ACPI S0. [If the target system state is ACPI S0, it means suspend-to-idle and the platform firmware is not going to be invoked to actually suspend the system, so there is no need to resume the bridges in that case.] Fixes: 77b3729ca03 (PCI / PM: Use SMART_SUSPEND and LEAVE_SUSPENDED flags for PCIe ports) Link: https://bugzilla.kernel.org/show_bug.cgi?id=200675 Reported-by: teika kazura <teika@gmx.com> Tested-by: teika kazura <teika@gmx.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: 4.16+ <stable@vger.kernel.org> # 4.16+: 26112ddc254c (PCI / ACPI / PM: Resume bridges ...) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-16Merge tag 'pci-v4.19-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: - Decode AER errors with names similar to "lspci" (Tyler Baicar) - Expose AER statistics in sysfs (Rajat Jain) - Clear AER status bits selectively based on the type of recovery (Oza Pawandeep) - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru Gagniuc) - Don't clear AER status bits if we're using the "Firmware-First" strategy where firmware owns the registers (Alexandru Gagniuc) - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy Shevchenko) - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas) - Defer DPC event handling to work queue (Keith Busch) - Use threaded IRQ for DPC bottom half (Keith Busch) - Print AER status while handling DPC events (Keith Busch) - Work around IDT switch ACS Source Validation erratum (James Puthukattukaran) - Emit diagnostics for all cases of PCIe Link downtraining (Links operating slower than they're capable of) (Alexandru Gagniuc) - Skip VFs when configuring Max Payload Size (Myron Stowe) - Reduce Root Port Max Payload Size if necessary when hot-adding a device below it (Myron Stowe) - Simplify SHPC existence/permission checks (Bjorn Helgaas) - Remove hotplug sample skeleton driver (Lukas Wunner) - Convert pciehp to threaded IRQ handling (Lukas Wunner) - Improve pciehp tolerance of missed events and initially unstable links (Lukas Wunner) - Clear spurious pciehp events on resume (Lukas Wunner) - Add pciehp runtime PM support, including for Thunderbolt controllers (Lukas Wunner) - Support interrupts from pciehp bridges in D3hot (Lukas Wunner) - Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit) - Document ACPI description of PCI host bridges (Bjorn Helgaas) - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for peer-to-peer DMA support (we don't have the peer-to-peer support yet; this is just one piece) (Logan Gunthorpe) - Clean up devm_of_pci_get_host_bridge_resources() resource allocation (Jan Kiszka) - Fixup resizable BARs after suspend/resume (Christian König) - Make "pci=earlydump" generic (Sinan Kaya) - Fix ROM BAR access routines to stay in bounds and check for signature correctly (Rex Zhu) - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer) - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe) - To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt) - Remove Aardvark outbound window configuration (Evan Wang) - Fix Aardvark bridge window sizing issue (Zachary Zhang) - Convert Aardvark to use pci_host_probe() to reduce code duplication (Thomas Petazzoni) - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas) - Add Cadence support for optional generic PHYs (Alan Douglas) - Add Cadence power management ops (Alan Douglas) - Remove redundant variable from Cadence driver (Colin Ian King) - Add Kirin MSI support (Xiaowei Song) - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone, armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo) - Move link notification settings from DesignWare core to individual drivers (Gustavo Pimentel) - Add endpoint library MSI-X interfaces (Gustavo Pimentel) - Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel) - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel) - Add endpoint library MSI-X test support (Gustavo Pimentel) - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation (Jia-Ju Bai) - Add more devices to Broadcom PAXC quirk (Ray Jui) - Work around corrupted Broadcom PAXC config space to enable SMMU and GICv3 ITS (Ray Jui) - Disable MSI parsing to work around broken Broadcom PAXC logic in some devices (Ray Jui) - Hide unconfigured functions to work around a Broadcom PAXC defect (Ray Jui) - Lower iproc log level to reduce console output during boot (Ray Jui) - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi) - Fix mobiveil missing include file (Lorenzo Pieralisi) - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi) - Fix mvebu I/O space remapping issues (Thomas Petazzoni) - Use generic pci_host_bridge in mvebu instead of ARM-specific API (Thomas Petazzoni) - Whitelist VMD devices with fast interrupt handlers to avoid sharing vectors with slow handlers (Keith Busch) * tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits) PCI/AER: Don't clear AER bits if error handling is Firmware-First PCI: Limit config space size for Netronome NFP5000 PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Match Root Port's MPS to endpoint's MPSS as necessary PCI: Skip MPS logic for Virtual Functions (VFs) PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Check for PCIe Link downtraining PCI: Add ACS Redirect disable quirk for Intel Sunrise Point PCI: Add device-specific ACS Redirect disable infrastructure PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support PCI: Allow specifying devices using a base bus and path of devfns PCI: Make specifying PCI devices in kernel parameters reusable PCI: Hide ACS quirk declarations inside PCI core PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers() ...
2018-06-30PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAMRafael J. Wysocki
It is reported that commit c62ec4610c40 (PM / core: Fix direct_complete handling for devices with no callbacks) introduced a system suspend regression on Samsung 305V4A by allowing a PCI bridge (not a PCIe port) to stay in D3 over suspend-to-RAM, which is a side effect of setting power.direct_complete for the children of that bridge that have no PM callbacks. On the majority of systems PCI bridges are not allowed to be runtime-suspended (the power/control sysfs attribute is set to "on" for them by default), but user space can change that setting and if it does so and a given bridge has no children with PM callbacks, the direct_complete optimization will be applied to it and it will stay in suspend over system suspend. Apparently, that confuses the platform firmware on the affected machine and that may very well happen elsewhere, so avoid the direct_complete optimization for PCI bridges with no drivers (if there is a driver, it should take care of the PM handling) on suspend-to-RAM altogether (that should not matter for suspend-to-idle as platform firmware is not involved in it). Fixes: c62ec4610c40 (PM / core: Fix direct_complete handling for devices with no callbacks) Link: https://bugzilla.kernel.org/show_bug.cgi?id=199941 Reported-by: n0000b.n000b@gmail.com Tested-by: n0000b.n000b@gmail.com Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Cc: 4.15+ <stable@vger.kernel.org> # 4.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-26PCI: shpchp: Separate existence of SHPC and permission to use itBjorn Helgaas
The shpchp driver registers for all PCI bridge devices. Its probe method should fail if either (1) the bridge doesn't have an SHPC or (2) the OS isn't allowed to use it (the platform firmware may be operating the SHPC itself). Separate these two tests into: - A new shpc_capable() that looks for the SHPC hardware and is applicable on all systems (ACPI and non-ACPI), and - A simplified acpi_get_hp_hw_control_from_firmware() that we call only when we already know an SHPC exists and there may be ACPI methods to either request permission to use it (_OSC) or transfer control to the OS (OSHP). acpi_get_hp_hw_control_from_firmware() is implemented when CONFIG_ACPI=y, but does nothing if the current platform doesn't support ACPI. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2018-06-04PCI: shpchp: Add shpchp_is_native()Mika Westerberg
In the same way we do for pciehp, add shpchp_is_native(), which returns true if the bridge should be handled by the native SHPC driver. Then convert the driver to use this function. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-02PCI: pciehp: Make pciehp_is_native() stricterMika Westerberg
Previously pciehp_is_native() returned true for any PCI device in a hierarchy where _OSC says we can use pciehp. This is incorrect because bridges without PCI_EXP_SLTCAP_HPC capability should be managed by acpiphp instead. Improve pciehp_is_native() to return true only when PCI_EXP_SLTCAP_HPC is set and the pciehp driver is present. In any other case return false to let acpiphp handle those. Suggested-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> [bhelgaas: remove NULL pointer check] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-19PCI: Tidy commentsBjorn Helgaas
Remove pointless comments that tell us the file name, remove blank line comments, follow multi-line comment conventions. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-02-01Merge branch 'pci/spdx' into nextBjorn Helgaas
* pci/spdx: PCI: Add SPDX GPL-2.0+ to replace implicit GPL v2 or later statement PCI: Add SPDX GPL-2.0+ to replace GPL v2 or later boilerplate PCI: Add SPDX GPL-2.0 to replace COPYING boilerplate PCI: Add SPDX GPL-2.0 to replace GPL v2 boilerplate PCI: Add SPDX GPL-2.0 when no license was specified
2018-01-26PCI: Add SPDX GPL-2.0 when no license was specifiedBjorn Helgaas
b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") added SPDX GPL-2.0 to several PCI files that previously contained no license information. Add SPDX GPL-2.0 to all other PCI files that did not contain any license information and hence were under the default GPL version 2 license of the kernel. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-18PCI: Add wrappers for dev_printk()Frederick Lawler
Add PCI-specific dev_printk() wrappers and use them to simplify the code slightly. No functional change intended. Signed-off-by: Frederick Lawler <fred@fredlawl.com> [bhelgaas: squash into one patch] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-10-05ACPI / PCI: Bail early in acpi_pci_add_bus() if there is no ACPI handleVitaly Kuznetsov
Hyper-V instances support PCI pass-through which is implemented through PV pci-hyperv driver. When a device is passed through, a new root PCI bus is created in the guest. The bus sits on top of VMBus and has no associated information in ACPI. acpi_pci_add_bus() in this case proceeds all the way to acpi_evaluate_dsm(), which reports ACPI: \: failed to evaluate _DSM (0x1001) While acpi_pci_slot_enumerate() and acpiphp_enumerate_slots() are protected against ACPI_HANDLE() being NULL and do nothing, acpi_evaluate_dsm() is not and gives us the error. It seems the correct fix is to not do anything in acpi_pci_add_bus() in such cases. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-01ACPI / PCI / PM: Rework acpi_pci_propagate_wakeup()Rafael J. Wysocki
The acpi_pci_propagate_wakeup() routine is there to handle cases in which PCI bridges (or PCIe ports) are expected to signal wakeup for devices below them, but currently it doesn't do that correctly. The problem is that acpi_pci_propagate_wakeup() uses acpi_pm_set_device_wakeup() for bridges and if that routine is called for multiple times to disable wakeup for the same device, it will disable it on the first invocation and the next calls will have no effect (it works analogously when called to enable wakeup, but that is not a problem). Now, say acpi_pci_propagate_wakeup() has been called for two different devices under the same bridge and it has called acpi_pm_set_device_wakeup() for that bridge each time. The bridge is now enabled to generate wakeup signals. Next, suppose that one of the devices below it resumes and acpi_pci_propagate_wakeup() is called to disable wakeup for that device. It will then call acpi_pm_set_device_wakeup() for the bridge and that will effectively disable remote wakeup for all devices under it even though some of them may still be suspended and remote wakeup may be expected to work for them. To address this (arguably theoretical) issue, allow wakeup.enable_count under struct acpi_device to grow beyond 1 in certain situations. In particular, allow that to happen in acpi_pci_propagate_wakeup() when wakeup is enabled or disabled for PCI bridges, so that wakeup is actually disabled for the bridge when all devices under it resume and not when just one of them does that. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 07:35:51 +0000