summaryrefslogtreecommitdiff
path: root/drivers/nvme
AgeCommit message (Collapse)Author
2017-06-26lightnvm: propagate right error code to targetJavier González
If nvme_alloc_request fails, propagate the right error, instead of assuming ENOMEM. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <matias@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-18nvme: host: unquiesce queue in nvme_kill_queues()Ming Lei
When nvme_kill_queues() is run, queues may be in quiesced state, so we forcibly unquiesce queues to avoid blocking dispatch, and I/O hang can be avoided in remove path. Peviously we use blk_mq_start_stopped_hw_queues() as counterpart of blk_mq_quiesce_queue(), now we have introduced blk_mq_unquiesce_queue(), so use it explicitly. Cc: linux-nvme@lists.infradead.org Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-18blk-mq: use the introduced blk_mq_unquiesce_queue()Ming Lei
blk_mq_unquiesce_queue() is used for unquiescing the queue explicitly, so replace blk_mq_start_stopped_hw_queues() with it. For the scsi part, this patch takes Bart's suggestion to switch to block quiesce/unquiesce API completely. Cc: linux-nvme@lists.infradead.org Cc: linux-scsi@vger.kernel.org Cc: dm-devel@redhat.com Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-16nvme: implement NS Optimal IO Boundary from 1.3 SpecScott Bauer
The NVMe 1.3 spec introduces Namespace Optimal IO Boundaries (NOIOB), which standardizes the stripe mechanism we currently have quirks for. This patch implements the necessary logic to handle this new feature. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme: don't hard code size of struct t10_pi_tupleSagi Grimberg
Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme: no need to wait for the reset when keepalive failsChristoph Hellwig
We don't need to wait for the reset from the delayed work item that is kicked off when we don't get a keepalive. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2017-06-15nvme: move reset workqueue handling to common codeChristoph Hellwig
This moves the nvme_reset function from the PCIe driver to common code, renaming it to nvme_reset_ctrl in the process. Additionally a new helper nvme_reset_ctrl_sync is added for the case where we want to wait for the reset. To facilitate that the reset_work work structure is move to the common nvme_ctrl structure and the ->reset_ctrl method is removed. For now the drivers initialize the reset_work with their own callback, but longer term we should move to callouts for specific parts of the reset process and move even more code to the core. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2017-06-15nvme-pci: merge init_request methodsChristoph Hellwig
Now that we get the tagset passed we can have a single implementation for the I/O and admin queues. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme-loop: merge init_request methodsChristoph Hellwig
Now that we get the tagset passed we can have a single implementation for the I/O and admin queues. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme-fc: merge init_request methodsChristoph Hellwig
Now that we get the tagset passed we can have a single implementation for the I/O and admin queues. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme-rdma: merge init_request and exit_request methodsChristoph Hellwig
Now that we get the tagset passed we can have a single implementation for the I/O and admin queues. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme: move protection information check into nvme_setup_rwChristoph Hellwig
It only applies to read/write commands, and this way non-PCIe drivers get the check as well instead of having to duplicate it when adding metadata support. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme: mark shutdown_timeout staticChristoph Hellwig
And open code the SHUTDOWN_TIMEOUT macro. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme-rdma: fix error code in nvme_rdma_create_ctrl()Dan Carpenter
We accidentally return ERR_PTR(0) which is NULL. The caller isn't explicitly checking for that but I couldn't immediately spot whether this would lead to a NULL dereference. Anyway, we can fix add an error code easily enough. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvmf: keep track of nvmet connect error statusGuan Junxiong
To let the host know what happends to the connection establishment, adjust the behavior of nvmf_log_connect_error to make more connect specifig error codes human-readble. Signed-off-by: Guan Junxiong <guanjunxiong@huawei.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvmet-fc: Remove a set-but-not-used variableBart Van Assche
This was detected by building the nvmet-fc driver with W=1. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: James Smart <james.smart@broadcom.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme: use ctrl->device consistently for loggingJohannes Thumshirn
Change the few left over users of ctrl->dev over to using ctrl->device for logging purposes, so we consistently use the same device. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvmet: allow overriding the NVMe VS via configfsJohannes Thumshirn
Allow overriding the announced NVMe Version of a via configfs. This is particularly helpful when debugging new features for the host or target side without bumping the hard coded version (as the target might not be fully compliant to the announced version yet). Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Guan Junxiong <guanjunxiong@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvmet: add uuid field to nvme_ns and populate via configfsJohannes Thumshirn
Add the UUID field from the NVMe Namespace Identification Descriptor to the nvmet_ns structure and allow it's population via configfs. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvmet: implement namespace identify descriptor listJohannes Thumshirn
A NVMe Identify NS command with a CNS value of '3' is expecting a list of Namespace Identification Descriptor structures to be returned to the host for the namespace requested in the namespace identify command. This Namespace Identification Descriptor structure consists of the type of the namespace identifier, the length of the identifier and the actual identifier. Valid types are NGUID and UUID which we have saved in our nvme_ns structure if they have been configured via configfs. If no value has been assigened to one of these we return an "invalid opcode" back to the host to maintain backward compatibiliy with older implementations without Namespace Identify Descriptor list support. Also as the Namespace Identify Descriptor list is the only mandatory feature change between 1.2.1 and 1.3 we can bump the advertised version as well. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme: provide UUID value to userspaceJohannes Thumshirn
Now that we have a way for getting the UUID from a target, provide it to userspace as well. Unfortunately there is already a sysfs attribute called UUID which is a misnomer as it holds the NGUID value. So instead of creating yet another wrong name, create a new 'nguid' sysfs attribute for the NGUID. For the UUID attribute add a check wheter the namespace has a UUID assigned to it and return this or return the NGUID to maintain backwards compatibility. This should give userspace a chance to catch up. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Sagi Grimberg <sagi@rimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme: get list of namespace descriptorsJohannes Thumshirn
If a target identifies itself as NVMe 1.3 compliant, try to get the list of Namespace Identification Descriptors and populate the UUID, NGUID and EUI64 fileds in the NVMe namespace structure with these values. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme: rename uuid to nguid in nvme_nsJohannes Thumshirn
The uuid field in the nvme_ns structure represents the nguid field from the identify namespace command. And as NVMe 1.3 introduced an UUID in the NVMe Namespace Identification Descriptor this will collide. So rename the uuid to nguid to prevent any further confusion. Unfortunately we export the nguid to sysfs in the uuid sysfs attribute, but this can't be changed anymore without possibly breaking existing userspace. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvmet: use NVME_IDENTIFY_DATA_SIZEJohannes Thumshirn
Use NVME_IDENTIFY_DATA_SIZE define instead of hard coding the magic 4096 value. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Hannes Reinecke <hare@suse.com> [hch: converted three more users] Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme-pci: remove redundant includesSagi Grimberg
Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
2017-06-15nvme-pci: Remove watchdog timerKeith Busch
The controller status polling was added to preemptively reset a failed controller. This early detection would allow commands that would normally timeout a chance for a retry, or find broken links when the platform didn't support hotplug. This once-per-second MMIO read, however, created more problems than it solves. This often races with PCIe Hotplug events that required complicated syncing between work queues, frequently triggered PCIe Completion Timeout errors that also lead to fatal machine checks, and unnecessarily disrupts low power modes by running on idle controllers. This patch removes the watchdog timer, and instead checks controller health only on an IO timeout when we have a reason to believe something is wrong. If the controller is failed, the driver will disable immediately and request scheduling a reset. Suggested-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme-pci: remap BAR0 to cover admin CQ doorbell for large strideXu Yu
The existing driver initially maps 8192 bytes of BAR0 which is intended to cover doorbells of admin SQ and CQ. However, if a large stride, e.g. 10, is used, the doorbell of admin CQ will be out of 8192 bytes. Consequently, a page fault will be raised when the admin CQ doorbell is accessed in nvme_configure_admin_queue(). This patch fixes this issue by remapping BAR0 before accessing admin CQ doorbell if the initial mapping is not enough. Signed-off-by: Xu Yu <yu.a.xu@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme: move nr_reconnects to nvme_ctrlSagi Grimberg
It is not a user option but rather a variable controller attribute. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme: queue ns scanning and async request from nvme_wqSagi Grimberg
To suppress the warning triggered by nvme_uninit_ctrl: kernel: [ 50.350439] nvme nvme0: rescanning kernel: [ 50.363351] ------------[ cut here]------------ kernel: [ 50.363396] WARNING: CPU: 1 PID: 37 at kernel/workqueue.c:2423 check_flush_dependency+0x11f/0x130 kernel: [ 50.363409] workqueue: WQ_MEM_RECLAIM nvme-wq:nvme_del_ctrl_work [nvme_core] is flushing !WQ_MEM_RECLAIM events:nvme_scan_work [nvme_core] This was triggered with nvme-loop, but can happen with rdma/pci as well afaict. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme: Move transports to use nvme-core workqueueSagi Grimberg
Instead of each transport using it's own workqueue, export a single nvme-core workqueue and use that instead. In the future, this will help us moving towards some unification if controller setup/teardown flows. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme: Don't allow to reset a reconnecting controllerSagi Grimberg
The reset operation is guaranteed to fail for all scenarios but the esoteric case where in the last reconnect attempt concurrent with the reset we happen to successfully reconnect. We just deny initiating a reset if we are reconnecting. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme-rdma: Get rid of CONNECTED stateSagi Grimberg
We only care about if the queue is LIVE for request submission, so no need for CONNECTED. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme-rdma: rework rdma connection establishment error pathSagi Grimberg
Instead of introducing a flag for if the queue is allocated, simply free the rdma resources when we get the error. We allocate the queue rdma resources when we have an address resolution, their we allocate (or take a reference on) our device so we should free it when we have error after the address resolution namely: 1. route resolution error 2. connect reject 3. connect error 4. peer unreachable error Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme-rdma: make nvme_rdma_[create|destroy]_queue_ib symmetricalSagi Grimberg
We put the reference on the device in the destroy routine so we should lookup and take the reference in the create routine. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme-rdma: Don't rearm the CQ when polling directlySagi Grimberg
We don't need it as the core polling context will take are of rearming the completion queue. Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme-rdma: Make queue flags bit numbers and not shiftsSagi Grimberg
bitops accept bit numbers. Reported-by: Vijay Immanuel <vijayi@attalasystems.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme-rdma: get rid of unused ctrl lockSagi Grimberg
Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme-loop: get rid of unused controller lockSagi Grimberg
Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-15nvme-pci: implement host memory buffer supportChristoph Hellwig
If a controller supports the host memory buffer we try to provide it with the requested size up to an upper cap set as a module parameter. We try to give as few as possible descriptors, eventually working our way down. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-06-13nvme: save hmpre and hmmin in struct nvme_ctrlChristoph Hellwig
We'll need the later for the HMB support. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
2017-06-13Merge branch 'uuid-types' of bombadil.infradead.org:public_git/uuid into ↵Christoph Hellwig
nvme-base
2017-06-12nvme-rdma: fix merge errorChristoph Hellwig
The merge of 4.12-rc5 into the for-4.13/block tree didn't handle the queue ready case correctly. Fix this by propagating blk_status_t into nvme_rdma_queue_is_ready. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-12Merge tag 'v4.12-rc5' into for-4.13/blockJens Axboe
We've already got a few conflicts and upcoming work depends on some of the changes that have gone into mainline as regression fixes for this series. Pull in 4.12-rc5 to resolve these conflicts and make it easier on down stream trees to continue working on 4.13 changes. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-09block: switch bios to blk_status_tChristoph Hellwig
Replace bi_error with a new bi_status to allow for a clear conversion. Note that device mapper overloaded bi_error with a private value, which we'll have to keep arround at least for now and thus propagate to a proper blk_status_t value. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09blk-mq: switch ->queue_rq return value to blk_status_tChristoph Hellwig
Use the same values for use for request completion errors as the return value from ->queue_rq. BLK_STS_RESOURCE is special cased to cause a requeue, and all the others are completed as-is. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09block: introduce new block status code typeChristoph Hellwig
Currently we use nornal Linux errno values in the block layer, and while we accept any error a few have overloaded magic meanings. This patch instead introduces a new blk_status_t value that holds block layer specific status codes and explicitly explains their meaning. Helpers to convert from and to the previous special meanings are provided for now, but I suspect we want to get rid of them in the long run - those drivers that have a errno input (e.g. networking) usually get errnos that don't know about the special block layer overloads, and similarly returning them to userspace will usually return somethings that strictly speaking isn't correct for file system operations, but that's left as an exercise for later. For now the set of errors is a very limited set that closely corresponds to the previous overloaded errno values, but there is some low hanging fruite to improve it. blk_status_t (ab)uses the sparse __bitwise annotations to allow for sparse typechecking, so that we can easily catch places passing the wrong values. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-09nvme-lightnvm: use blk_execute_rq in nvme_nvm_submit_user_cmdChristoph Hellwig
Instead of reinventing it poorly. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-06-07nvme: relax APST default max latency to 100msKai-Heng Feng
Christoph Hellwig suggests we should to make APST work out of the box. Hence relax the the default max latency to make them able to enter deepest power state on default. Here are id-ctrl excerpts from two high latency NVMes: vid : 0x14a4 ssvid : 0x1b4b mn : CX2-GB1024-Q11 NVMe LITEON 1024GB ps 3 : mp:0.1000W non-operational enlat:5000 exlat:5000 rrt:3 rrl:3 rwt:3 rwl:3 idle_power:- active_power:- ps 4 : mp:0.0100W non-operational enlat:50000 exlat:100000 rrt:4 rrl:4 rwt:4 rwl:4 idle_power:- active_power:- vid : 0x15b7 ssvid : 0x1b4b mn : A400 NVMe SanDisk 512GB ps 3 : mp:0.0500W non-operational enlat:51000 exlat:10000 rrt:0 rrl:0 rwt:0 rwl:0 idle_power:- active_power:- ps 4 : mp:0.0055W non-operational enlat:1000000 exlat:100000 rrt:0 rrl:0 rwt:0 rwl:0 idle_power:- active_power:- Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-07nvme: only consider exit latency when choosing useful non-op power statesKai-Heng Feng
When a NVMe is in non-op states, the latency is exlat. The latency will be enlat + exlat only when the NVMe tries to transit from operational state right atfer it begins to transit to non-operational state, which should be a rare case. Therefore, as Andy Lutomirski suggests, use exlat only when deciding power states to trainsit to. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-07nvme-fc: fix missing put reference on controller create failureJames Smart
The failure case, of a create controller request, called nvme_uninit_ctrl() but didn't do a put to allow the nvme controller to be deleted. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 23:47:44 +0000