| Age | Commit message (Collapse) | Author |
|---|
|
For Spec regarding MNAN value:-
If the controller supports Asymmetric Namespace Access Reporting, then
this field shall be set to a non-zero value that is less than or equal
to the NN value.
Instead of using subsys->max_nsid that gets calculated dynamically,
use NVMET_MAX_NAMESPACES value to report NN. This way we will maintain
the MNAN value spec compliant with NN.
Without this patch, code results in the following error :-
[337976.409142] nvme nvme1: Invalid MNAN value 1024
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
NVMe TP 4053 – Zoned Namespaces (ZNS) allows host software to
communicate with a non-volatile memory subsystem using zones for NVMe
protocol-based controllers. NVMeOF already support the ZNS NVMe
Protocol compliant devices on the target in the passthru mode. There
are generic zoned block devices like Shingled Magnetic Recording (SMR)
HDDs that are not based on the NVMe protocol.
This patch adds ZNS backend support for non-ZNS zoned block devices as
NVMeOF targets.
This support includes implementing the new command set NVME_CSI_ZNS,
adding different command handlers for ZNS command set such as NVMe
Identify Controller, NVMe Identify Namespace, NVMe Zone Append,
NVMe Zone Management Send and NVMe Zone Management Receive.
With the new command set identifier, we also update the target command
effects logs to reflect the ZNS compliant commands.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
NVMe TP 4056 allows controllers to support different command sets.
NVMeoF target currently only supports namespaces that contain
traditional logical blocks that may be randomly read and written. In
some applications there is a value in exposing namespaces that contain
logical blocks that have special access rules (e.g. sequentially write
required namespace such as Zoned Namespace (ZNS)).
In order to support the Zoned Block Devices (ZBD) backend, controllers
need to have support for ZNS Command Set Identifier (CSI).
In this preparation patch, we adjust the code such that it can now
support the default command set identifier. We update the namespace data
structure to store the CSI value which defaults to NVME_CSI_NVM
that represents traditional logical blocks namespace type.
The CSI support is required to implement the ZBD backend for NVMeOF
with host side NVMe ZNS interface, since ZNS commands belong to
the different command set than the default one.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We report error and complete the request when identify cns value is not
handled in nvmet_execute_identify(). This error reporting is also needed
for Zone Block Device backend for NVMeOF target.
Add a helper nvmet_req_cns_error_compplete() to report an error and
complete the request when idenitfy command cns not handled value.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Currently, once the subsystem's model_number is set for the first time
there is no way to change it. However, as long as no connection was
established to nvmf target, there is no reason for such restriction and
we should allow to change the subsystem's model_number as many times as
needed.
In addition, in order to simplfy the changes and make the model number
flow more similar to the rest of the attributes in the Identify
Controller data structure, we set a default value for the model number
at the initiation of the subsystem.
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Noam Gottlieb <ngottlieb@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Once some host has connected to the target, make sure that the serial
number is stable and cannot be changed.
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Noam Gottlieb <ngottlieb@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
According to the NVM specification, the serial_number should be 20 bytes
(bytes 23:04 of the Identify Controller data structure), and should
contain only ASCII characters.
In accordance, the serial_number size is changed to 20 bytes and before
any attempt to store a new value in serial_number we check that the
input is valid - i.e. contains only ASCII characters, is not empty and
does not exceed 20 bytes.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Noam Gottlieb <ngottlieb@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Use the helper nvmet_report_invalid_opcode() to report invalid opcode
so we can remove the duplicate code.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Nothing can stop a host from submitting invalid commands. The target
just needs to respond with an appropriate status, but that's not a
target error. Demote invalid command messages to the debug level so
these events don't spam the kernel logs.
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Issue following command:
nvme set-feature -f 0xf -v 0 /dev/nvme1n1 # disable keep-alive timer
nvme admin-passthru -o 0x18 /dev/nvme1n1 # send keep-alive command
will make keep-alive timer fired and thus delete the controller like
below:
[247459.907635] nvmet: ctrl 1 keep-alive timer (0 seconds) expired!
[247459.930294] nvmet: ctrl 1 fatal error occurred!
Avoid this by not queuing delayed keep-alive if it is disabled when
keep-alive command is received from the admin queue.
Signed-off-by: Hou Pu <houpu.main@gmail.com>
Tested-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Instead of the using the whitespaces use tab spacing in the
nvmet_execute_identify_ns().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In nvmet_check_ctrl_status() cmd can be derived from nvmet_req. Remove
the local variable cmd in the nvmet_check_ctrl_status() and function
parameter cmd for nvmet_check_ctrl_status(). Derive the cmd value from
req parameter in the nvmet_check_ctrl_status().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In case we have already established connection to nvmf target, it
shouldn't be allowed to change the model_number. E.g. if someone will
identify ctrl and get model_number of "my_model" later on will change
the model_numbel via configfs to "my_new_model" this will break the NVMe
specification for "Get Log Page – Persistent Event Log" that refers to
Model Number as: "This field contains the same value as reported in the
Model Number field of the Identify Controller data structure, bytes
63:24."
Although it doesn't mentioned explicitly that this field can't be
changed, we can assume it.
So allow setting this field only once: using configfs or in the first
identify ctrl operation.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Just like what we have to get the passthru ctrl from the req, add an
helper to get the subsystem associated with the nvmet_req() instead
of open coding the chain of structures.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
In nvmet_execute_identify_ns() local variable ctrl is accessed only in
one place, remove that and directly use it from nvmet_req->sq->ctrl.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The six callers of nvmet_find_namespace() duplicate the error log page
update and status setting code for each call on failure.
All callers are nvmet requests based functions, so we can pass req
to the nvmet_find_namesapce() & derive ctrl from req, that'll allow us
to update the error log page in nvmet_find_namespace(). Now that we
pass the request we can also get rid of the local variable in
nvmet_find_namespace() and use the req->ns and return the error code.
Replace the ctrl parameter with nvmet_req for nvmet_find_namespace(),
centralize the error log page update for non allocated namesapces, and
return uniform error for non-allocated namespace.
The nvmet_find_namespace() takes nsid parameter which is from NVMe
commands structures such as get_log_page, identify, rw and common. All
these commands have same offset for the nsid field.
Derive nsid from req->cmd->common.nsid) & remove the extra parameter
from the nvmet_find_namespace().
Lastly now we associate the ns to the req parameter that we pass to the
nvmet_find_namespace(), rename nvmet_find_namespace() to
nvmet_req_find_ns().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
For nvmet_find_namespace() error case we have inconsistent error code
mapping in the function nvmet_get_smart_log_nsid() and
nvmet_set_feat_write_protect().
There is no point in retrying for the invalid namesapce from the host
side. Set the error code to the NVME_SC_INVALID_NS | NVME_SC_DNR which
matches what we have in nvmet_execute_identify_desclist().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
For unallocated namespace in nvmet_execute_identify_ns() don't set the
status to NVME_SC_INVALID_NS, set it to zero.
Fixes: bffcd507780e ("nvmet: set right status on error in id-ns handler")
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We remove the extra local variable struct nvmet_ns in
nvmet_execute_identify_ns() since req already has ns member that can be
reused, this also eliminates the explicit call to nvmet_put_namespace()
which is already present in the request completion path.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We remove the extra local variable struct nvmet_ns in
nvmet_execute_identify_desclist() since req already has ns member that
can be reused, this also eliminates the explicit call to
nvmet_put_namespace() which is already present in the request
completion path.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
We remove the extra local variable struct nvmet_ns in
nvmet_get_smart_log_nsid() since req already has ns member that can be
reused, this also eliminates the explicit call to nvmet_put_namespace()
which is already present in the request completion path.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The function nvmet_execute_identify_ns() doesn't set the status if call
to nvmet_find_namespace() fails. In that case we set the status of the
request to the value return by the nvmet_copy_sgl().
Set the status to NVME_SC_INVALID_NS and adjust the code such that
request will have the right status on nvmet_find_namespace() failure.
Without this patch :-
NVME Identify Namespace 3:
nsze : 0
ncap : 0
nuse : 0
nsfeat : 0
nlbaf : 0
flbas : 0
mc : 0
dpc : 0
dps : 0
nmic : 0
rescap : 0
fpi : 0
dlfeat : 0
nawun : 0
nawupf : 0
nacwu : 0
nabsn : 0
nabo : 0
nabspf : 0
noiob : 0
nvmcap : 0
mssrl : 0
mcl : 0
msrc : 0
nsattr : 0
nvmsetid: 0
anagrpid: 0
endgid : 0
nguid : 00000000000000000000000000000000
eui64 : 0000000000000000
lbaf 0 : ms:0 lbads:0 rp:0 (in use)
With this patch-series :-
feb3b88b501e (HEAD -> nvme-5.11) nvmet: remove extra variable in identify ns
6302aa67210a nvmet: remove extra variable in id-desclist
ed57951da453 nvmet: remove extra variable in smart log nsid
be384b8c24dc nvmet: set right status on error in id-ns handler
NVMe status: INVALID_NS: The namespace or the format of that namespace is invalid(0xb)
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Use struct block_device to lookup partitions on a disk. This removes
all usage of struct hd_struct from the I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Coly Li <colyli@suse.de> [bcache]
Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
A user may modify the kato by a set features cmd. To properly deal
with races or a kato value of 0 (no keep alive enabled) change
nvmet_set_feat_kato to first disable the timer, then set the value
and then re-enable the timer.
Signed-off-by: Amit Engel <amit.engel@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add passthru command handling capability for the NVMeOF target and
export passthru APIs which are used to integrate passthru
code with nvmet-core.
The new file passthru.c handles passthru cmd parsing and execution.
In the passthru mode, we create a block layer request from the nvmet
request and map the data on to the block layer request.
Admin commands and features are on an allow list as there are a number
of each that don't make too much sense with passthrough. We use an
allow list such that new commands can be considered before being blindly
passed through. In both cases, vendor specific commands are always
allowed.
We also reject reservation IO commands as the underlying device cannot
differentiate between multiple hosts behind a fabric.
Based-on-a-patch-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch replaces the ctrl->namespaces tracking from linked list to
xarray and improves the performance when accessing one namespce :-
XArray vs Default:-
IOPS and BW (more the better) increase BW (~1.8%):-
---------------------------------------------------
XArray :-
read: IOPS=160k, BW=626MiB/s (656MB/s)(18.3GiB/30001msec)
read: IOPS=160k, BW=626MiB/s (656MB/s)(18.3GiB/30001msec)
read: IOPS=162k, BW=631MiB/s (662MB/s)(18.5GiB/30001msec)
Default:-
read: IOPS=156k, BW=609MiB/s (639MB/s)(17.8GiB/30001msec)
read: IOPS=157k, BW=613MiB/s (643MB/s)(17.0GiB/30001msec)
read: IOPS=160k, BW=626MiB/s (656MB/s)(18.3GiB/30001msec)
Submission latency (less the better) decrease (~8.3%):-
-------------------------------------------------------
XArray:-
slat (usec): min=7, max=8386, avg=11.19, stdev=5.96
slat (usec): min=7, max=441, avg=11.09, stdev=4.48
slat (usec): min=7, max=1088, avg=11.21, stdev=4.54
Default :-
slat (usec): min=8, max=2826.5k, avg=23.96, stdev=3911.50
slat (usec): min=8, max=503, avg=12.52, stdev=5.07
slat (usec): min=8, max=2384, avg=12.50, stdev=5.28
CPU Usage (less the better) decrease (~5.2%):-
----------------------------------------------
XArray:-
cpu : usr=1.84%, sys=18.61%, ctx=949471, majf=0, minf=250
cpu : usr=1.83%, sys=18.41%, ctx=950262, majf=0, minf=237
cpu : usr=1.82%, sys=18.82%, ctx=957224, majf=0, minf=234
Default:-
cpu : usr=1.70%, sys=19.21%, ctx=858196, majf=0, minf=251
cpu : usr=1.82%, sys=19.98%, ctx=929720, majf=0, minf=227
cpu : usr=1.83%, sys=20.33%, ctx=947208, majf=0, minf=235.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Replace has_keyed_sgls and metadata_support booleans with a flags member
that will be used for adding more features in the future.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Expose the namespace metadata format when PI is enabled. The user needs
to enable the capability per subsystem and per port. The other metadata
properties are taken from the namespace/bdev.
Usage example:
echo 1 > /config/nvmet/subsystems/${NAME}/attr_pi_enable
echo 1 > /config/nvmet/ports/${PORT_NUM}/param_pi_enable
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The function doesn't check only the data length, because the transfer
length includes also the metadata length in some cases. This is
preparation for adding metadata (T10-PI) support.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch adds a wrapper helper to indicate size change in the bdev &
file-backed namespace when revalidating ns. This helper is needed in
order to minimize code repetition in the next patch for configfs.c and
existing admin-cmd.c.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimbeg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add support for detecting capacity changes on nvmet blockdev and file
backed namespaces. This allows for emulating and testing online resizing
of nvme devices and filesystems on top.
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
[chaitanya: Fix comments posted on V1]
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
[hch: reuse code a bit more]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block driver updates from Jens Axboe:
- floppy driver cleanup series from Willy
- NVMe updates and fixes (Various)
- null_blk trace improvements (Chaitanya)
- bcache fixes (Coly)
- md fixes (via Song)
- loop block size change optimizations (Martijn)
- scnprintf() use (Takashi)
* tag 'for-5.7/drivers-2020-03-29' of git://git.kernel.dk/linux-block: (81 commits)
null_blk: add trace in null_blk_zoned.c
null_blk: add tracepoint helpers for zoned mode
block: add a zone condition debug helper
nvme: cleanup namespace identifier reporting in nvme_init_ns_head
nvme: rename __nvme_find_ns_head to nvme_find_ns_head
nvme: refactor nvme_identify_ns_descs error handling
nvme-tcp: Add warning on state change failure at nvme_tcp_setup_ctrl
nvme-rdma: Add warning on state change failure at nvme_rdma_setup_ctrl
nvme: Fix controller creation races with teardown flow
nvme: Make nvme_uninit_ctrl symmetric to nvme_init_ctrl
nvme: Fix ctrl use-after-free during sysfs deletion
nvme-pci: Re-order nvme_pci_free_ctrl
nvme: Remove unused return code from nvme_delete_ctrl_sync
nvme: Use nvme_state_terminal helper
nvme: release ida resources
nvme: Add compat_ioctl handler for NVME_IOCTL_SUBMIT_IO
nvmet-tcp: optimize tcp stack TX when data digest is used
nvme-fabrics: Use scnprintf() for avoiding potential buffer overflow
nvme-multipath: do not reset on unknown status
nvmet-rdma: allocate RW ctxs according to mdts
...
|
|
Some transports, such as RDMA, would like to set the Maximum Data
Transfer Size (MDTS) according to device/port/ctrl characteristics.
This will enable the transport to set the optimal MDTS according to
controller needs and device capabilities. Add a new nvmet transport
op that is called during ctrl identification. This will not effect
transports that don't implement this option. The return value of the new
op is according to the NVMe spec definition for MDTS.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
|
|
For set feature command when setting up NVME_FEAT_NUM_QUEUES, check
Number of I/O Completion Queues Requested (NCQR) and Number of I/O
Submission Queues Requested (NSQR) before we proceed, for invalid values
(i.e. 65535) return an appropriate NVMe invalid field status.
Signed-off-by: Amit Engel <Amit.Engel@dell.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
These macros are just used by a few files. Move them out of genhd.h,
which is included everywhere into a new standalone header.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch adds a new target subsys attribute which allows user to
optionally specify model name which then used in the
nvmet_execute_identify_ctrl() to fill up the nvme_id_ctrl structure.
The default value for the model is set to "Linux" for backward
compatibility.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Mark Ruijter <MRuijter@onestopsystems.com>
[chaitanya.kulkarni@wdc.com
*Use macro for default model, coding style fixes.
*Use RCU for accessing model in for configfs and in
nvmet_execute_identify_ctrl().
]
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The existing implementation for the get_feature admin-cmd does not
use per-feature data len. This patch introduces a new helper function
nvmet_feat_data_len(), which is used to calculate per feature data len.
Right now we only set data len for fid 0x81 (NVME_FEAT_HOST_ID).
Fixes: commit e9061c397839 ("nvmet: Remove the data_len field from the nvmet_req struct")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Amit Engel <amit.engel@dell.com>
[endiness, naming, and kernel style fixes]
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the special cases for fabrics commands and the discovery controller
to nvmet_parse_admin_cmd in preparation for adding passthrough support.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of storing the expected length and checking it when it's
executed, just check the length inside the command themselves.
A new helper, nvmet_check_data_len() is created to help with this
check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[split patch, udpate changelog]
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of picking the sub-command handler to execute in a nested
switch statement introduce a landing functions that calls out
to the appropriate sub-command handler.
This will allow us to have a common place in the handler to check
the transfer length in a future patch.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[split patch, update change log]
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the command data_len cannot hold all the controller errors,
we should simply return as much errors as we can fit
instead of failing the command.
Signed-off-by: Amit Engel <amit.engel@dell.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
In nvme spec 1.3 there is a definition for data write/read counters
from SMART log, (See section 5.14.1.2):
This value is reported in thousands (i.e., a value of 1
corresponds to 1000 units of 512 bytes read) and is rounded up.
However, in nvme target where value is reported with actual units,
but not thousands of units as the spec requires.
Signed-off-by: Tom Wu <tomwu@mellanox.com>
Reviewed-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Make the NVMe NAWUN, NAWUPF, NACWU, NPWG, NPWA, NPDG and NOWS attributes
available to initator systems for the block backend.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The nvme target hadn't been taking the Get Log Page offset parameter
into consideration, and so has been returning corrupted log pages when
offsets are used. Since many tools, including nvme-cli, split the log
request to 4k, we've been breaking discovery log responses when more
than 3 subsystems exist.
Fix the returned data by internally generating the entire discovery
log page and copying only the requested bytes into the user buffer. The
command log page offset type has been modified to a native __le64 to
make it easier to extract the value from a command.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Update license to use SPDX-License-Identifier instead of verbose license
text.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
|
|
Now that we have error log page implementation update smart log command
handler to provide number of error log entries in the lifetime of the
controller field.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Now that we have support for all the major parts of the target we add
a NVMe error log page handler so that host can read the log page.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This patch adds the support to maintain the error log page for admin
commands.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
This is a preparation patch which removes the nvme common command cdw10
array and replace with individual fields. This is needed for the nvmet
error log page implementation make is error log page entry offset
assignment easier.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Make common process of get/set features available to other controllers by
making simple functions static inline and others not static and prototypes
in nvmet.h file
Also remove static from nvmet_execute_async_event and add prototype to
nvmet.h to allow used by other controllers
Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
