summaryrefslogtreecommitdiff
path: root/drivers/nfc
AgeCommit message (Collapse)Author
2015-12-29nfc: st21nfca: Add support for HCI event connectivityChristophe Ricard
Add support for connectivity event Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: st-nci: Add support for HCI event connectivityChristophe Ricard
Add support for connectivity event Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29NFC: st21nfca: Auto-select core moduleChristophe Ricard
The core st21nca module is useless without the I2C access module. So hide NFC_ST21NFCA and select it automatically if either NFC_ST21NFCA_I2C is selected. This avoids presenting NFC_ST21NFCA when NFC_ST21NFCA_I2C can't be selected. Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29NFC: st-nci: Auto-select core moduleChristophe Ricard
The core st-nci module is useless without either the I2C or the SPI access module. So hide NFC_ST_NCI and select it automatically if either NFC_ST_NCI_I2C or NFC_ST_NCI_SPI is selected. This avoids presenting NFC_ST_NCI when neither NFC_ST_NCI_I2C nor NFC_ST_NCI_SPI can be selected. Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: st21nfca: Remove useless pr_info in st21nfca_hci_i2c_disableChristophe Ricard
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: st21nfca: Code cleanupChristophe Ricard
A few code cleanups, mostly empty lines removal. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: st-nci: Code cleanupChristophe Ricard
A few code cleanups, mostly empty lines removal. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: st21nfca: Add support for acpi probing for i2c device.Christophe Ricard
Add support for acpi probing. SMO2100 is used for st21nfca It has been tested with the following acpi node on Minnowboard Max: Note: Remove uicc-present or ese-present Package if one them is not supported. Device (NFC1) { Name (_ADR, Zero) // _ADR: Address Name (_HID, "SMO2100") // _HID: Hardware ID Name (_CID, "SMO2100") // _CID: Compatible ID Name (_DDN, "SMO NFC") // _DDN: DOS Device Name Name (_UID, One) // _UID: Unique ID Name (_DSD, Package (0x02) { /* Device Properties for _DSD */ ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package (0x02) { Package (0x02) { "uicc-present", 1 }, Package (0x02) { "ese-present", 1 } } }) Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (SBUF, ResourceTemplate () { I2cSerialBus (0x0001, ControllerInitiated, 400000, AddressingMode7Bit, "\\_SB.I2C7", 0x00, ResourceConsumer, ,) GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0001 } GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0002, } }) Return (SBUF) /* \_SB_.I2C7.NFC1._CRS.SBUF */ } Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: st-nci: Add support for acpi probing for spi device.Christophe Ricard
Add support for acpi probing. SMO2101 is used for st21nfcb It has been tested with the following acpi node on Minnowboard: Note: Remove uicc-present or ese-present Package if one of them is not supported. Device (NFC1) { Name (_ADR, Zero) // _ADR: Address Name (_HID, "SMO2101") // _HID: Hardware ID Name (_CID, "SMO2101") // _CID: Compatible ID Name (_DDN, "SMO NFC") // _DDN: DOS Device Name Name (_UID, One) // _UID: Unique ID Name (_DSD, Package (0x02) { /* Device Properties for _DSD */ ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package (0x02) { Package (0x02) { "uicc-present", 1 }, Package (0x02) { "ese-present", 1 } } }) Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (SBUF, ResourceTemplate () { SpiSerialBus (0, PolarityLow, FourWireMode, 8, ControllerInitiated, 4000000, ClockPolarityLow, ClockPhaseFirst, "\\_SB.SPI1", 0x00, ResourceConsumer, ,) GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0001 } GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0002, } }) Return (SBUF) /* \_SB_.SPI1.NFC1._CRS.SBUF */ } Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: st-nci: Add support for acpi probing for i2c device.Christophe Ricard
Add support for acpi probing. SMO2101 is used for st21nfcb SMO2102 is used for st21nfcc It has been tested with the following acpi node on Minnowboard: Note: Remove uicc-present or ese-present Package if one them is not supported. Device (NFC1) { Name (_ADR, Zero) // _ADR: Address Name (_HID, "SMO2101") // _HID: Hardware ID Name (_CID, "SMO2101") // _CID: Compatible ID Name (_DDN, "SMO NFC") // _DDN: DOS Device Name Name (_UID, One) // _UID: Unique ID Name (_DSD, Package (0x02) { /* Device Properties for _DSD */ ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package (0x02) { Package (0x02) { "uicc-present", 1 }, Package (0x02) { "ese-present", 1 } } }) Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (SBUF, ResourceTemplate () { I2cSerialBus (0x0008, ControllerInitiated, 400000, AddressingMode7Bit, "\\_SB.I2C7", 0x00, ResourceConsumer, ,) GpioInt (Edge, ActiveHigh, ExclusiveAndWake, PullNone, 0x0000, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0001 } GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO2", 0x00, ResourceConsumer, ,) { // Pin list 0x0002, } }) Return (SBUF) /* \_SB_.I2C7.NFC1._CRS.SBUF */ } Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: st21nfca: Add macro for gpio nameChristophe Ricard
Add macro definition for each gpio string for an easier code maintenance. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: st-nci: Add macro for gpio nameChristophe Ricard
Add macro definition for each gpio string for an easier code maintenance. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: st21nfca: Group device table togetherChristophe Ricard
Group device table at the same place in order to make the code easier to read and parse. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: st-nci: Group device table togetherChristophe Ricard
Group device table at the same place in order to make the code easier to read and parse. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: pn544: Remove #ifdef CONFIG_OFChristophe Ricard
All of_* APIs are safe if CONFIG_OF is not define. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: nxp-nci: Remove #ifdef CONFIG_OFChristophe Ricard
All of_* APIs are safe if CONFIG_OF is not define. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: st21nfca: Remove unneeded CONFIG_OF switchesChristophe Ricard
DT headers already define NOOP routines when CONFIG_OF is not defined. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: st-nci: Remove unneeded CONFIG_OF switchesChristophe Ricard
DT headers already define NOOP routines when CONFIG_OF is not defined. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29nfc: st-nci: Remove useless #include "ndlc.h"Christophe Ricard
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29NFC: trf7970a: use to_spi_deviceGeliang Tang
Use to_spi_device() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29NFC: st95hf: Fix build errorShikha Singh
This fixes a build error on the mn10300 architecture: drivers/nfc/st95hf/core.c:765:20: error: conflicting types for 'irq_handler' static irqreturn_t irq_handler(int irq, void *st95hfcontext) ^ In file included from arch/mn10300/include/asm/reset-regs.h:16:0, from arch/mn10300/include/asm/irq.h:18, from include/linux/irq.h:26, from arch/mn10300/include/asm/hardirq.h:16, from include/linux/hardirq.h:8, from include/linux/interrupt.h:12, from drivers/nfc/st95hf/core.c:23: arch/mn10300/include/asm/exceptions.h:107:24: note: previous declaration of 'irq_handler' was here extern asmlinkage void irq_handler(void); Signed-off-by: Shikha Singh <shikha.singh@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-29NFC: Add STMicroelectronics ST95HF driverShikha Singh
This driver supports STMicroelectronics NFC Transceiver "ST95HF", in in initiator role to read/write ISO14443 Type 4A, ISO14443 Type 4B and ISO15693 Type5 tags. The ST95HF datasheet is available here: http://www.st.com/web/en/resource/technical/document/datasheet/DM00102056.pdf Signed-off-by: Shikha Singh <shikha.singh@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-21NFC: add rx delay sysfs parameter for nfcsim workqueueSaurabh Sengar
added the rx delay parameter as a device tunable parameter. Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-12-20nfc: s3fwrn5: constify s3fwrn5_phy_ops structuresJulia Lawall
The s3fwrn5_phy_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Robert Baldyga <r.baldyga@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-11-18nxp-nci: i2c: Do not check specifically for -EREMOTEIO errorFabio Estevam
Function nxp_nci_i2c_write currently assumes in case of I2C bus NACK that the NFC device is in stand-by mode and will retry the I2C transaction after a pause. This assumes that the first failed I2C transaction will wake-up the device. This is done by checking on EREMOTEIO, which is wrong. According to Documentation/i2c/fault-codes ENXIO shall be used. Unfortunately the NOACK return code is currently inconsistent across various I2C host controller drivers. So only check for the generic error case instead. This is a temporary fix. As soon as all I2C bus master drivers are fixed to consistently return 'ENXIO', then we can do the specific error check again. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix null deref in xt_TEE netfilter module, from Eric Dumazet. 2) Several spots need to get to the original listner for SYN-ACK packets, most spots got this ok but some were not. Whilst covering the remaining cases, create a helper to do this. From Eric Dumazet. 3) Missiing check of return value from alloc_netdev() in CAIF SPI code, from Rasmus Villemoes. 4) Don't sleep while != TASK_RUNNING in macvtap, from Vlad Yasevich. 5) Use after free in mvneta driver, from Justin Maggard. 6) Fix race on dst->flags access in dst_release(), from Eric Dumazet. 7) Add missing ZLIB_INFLATE dependency for new qed driver. From Arnd Bergmann. 8) Fix multicast getsockopt deadlock, from WANG Cong. 9) Fix deadlock in btusb, from Kuba Pawlak. 10) Some ipv6_add_dev() failure paths were not cleaning up the SNMP6 counter state. From Sabrina Dubroca. 11) Fix packet_bind() race, which can cause lost notifications, from Francesco Ruggeri. 12) Fix MAC restoration in qlcnic driver during bonding mode changes, from Jarod Wilson. 13) Revert bridging forward delay change which broke libvirt and other userspace things, from Vlad Yasevich. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) Revert "bridge: Allow forward delay to be cfgd when STP enabled" bpf_trace: Make dependent on PERF_EVENTS qed: select ZLIB_INFLATE net: fix a race in dst_release() net: mvneta: Fix memory use after free. net: Documentation: Fix default value tcp_limit_output_bytes macvtap: Resolve possible __might_sleep warning in macvtap_do_read() mvneta: add FIXED_PHY dependency net: caif: check return value of alloc_netdev net: hisilicon: NET_VENDOR_HISILICON should depend on HAS_DMA drivers: net: xgene: fix RGMII 10/100Mb mode netfilter: nft_meta: use skb_to_full_sk() helper net_sched: em_meta: use skb_to_full_sk() helper sched: cls_flow: use skb_to_full_sk() helper netfilter: xt_owner: use skb_to_full_sk() helper smack: use skb_to_full_sk() helper net: add skb_to_full_sk() helper and use it in selinux_netlbl_skbuff_setsid() bpf: doc: correct arch list for supported eBPF JIT dwc_eth_qos: Delete an unnecessary check before the function call "of_node_put" bonding: fix panic on non-ARPHRD_ETHER enslave failure ...
2015-11-05Merge tag 'spi-v4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
2015-11-04Merge tag 'char-misc-4.4-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver update for 4.4-rc1. Lots of different driver and subsystem updates, hwtracing being the largest with the addition of some new platforms that are now supported. Full details in the shortlog. All of these have been in linux-next for a long time with no reported issues" * tag 'char-misc-4.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (181 commits) fpga: socfpga: Fix check of return value of devm_request_irq lkdtm: fix ACCESS_USERSPACE test mcb: Destroy IDA on module unload mcb: Do not return zero on error path in mcb_pci_probe() mei: bus: set the device name before running fixup mei: bus: use correct lock ordering mei: Fix debugfs filename in error output char: ipmi: ipmi_ssif: Replace timeval with timespec64 fpga: zynq-fpga: Fix issue with drvdata being overwritten. fpga manager: remove unnecessary null pointer checks fpga manager: ensure lifetime with of_fpga_mgr_get fpga: zynq-fpga: Change fw format to handle bin instead of bit. fpga: zynq-fpga: Fix unbalanced clock handling misc: sram: partition base address belongs to __iomem space coresight: etm3x: adding documentation for sysFS's cpu interface vme: 8-bit status/id takes 256 values, not 255 fpga manager: Adding FPGA Manager support for Xilinx Zynq 7000 ARM: zynq: dt: Updated devicetree for Zynq 7000 platform. ARM: dt: fpga: Added binding docs for Xilinx Zynq FPGA manager. ver_linux: proc/modules, limit text processing to 'sed' ...
2015-11-05NFC: nfcmrvl: avoid being stuck on FW dnld timeoutVincent Cuissard
FW Download procedure can block on del_timer_sync because the timer is not running. This patch check that timer is scheduled before cancelling it. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-11-05NFC: nfcmrvl: remove unneeded CONFIG_OF switchesVincent Cuissard
Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-11-05NFC: nfcmrvl: free reset gpioVincent Cuissard
Reset GPIO shall be freed by the driver since the device used in devm_ calls can be still valid on unregister. If user removes the module and inserts it again, the devm_gpio_request will fail because the underlying physical device (e.g i2c) was not removed so the device management won't have freed the gpio. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-11-05NFC: nfcmrvl: add a small wait after setting UART breakVincent Cuissard
A small wait is inserted to ensure that controller has enough time to handle the break character. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-11-05NFC: nfcmrvl: avoid UART break control during FW downloadVincent Cuissard
BootROM does not support any form of power management during FW download. On UART, the driver shall not try to send breaks. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-11-05NFC: nfcmrvl: fix SPI driver dependenciesArnd Bergmann
The newly added nfcmrvl_spi driver uses the spi_nci infrastructure, but does not have a Kconfig dependency on that, so we can get a link-time error: drivers/built-in.o: In function `nfcmrvl_spi_nci_send': (.text+0x1428dc): undefined reference to `nci_spi_send' drivers/built-in.o: In function `nfcmrvl_spi_probe': (.text+0x142a24): undefined reference to `nci_spi_allocate_spi' drivers/built-in.o: In function `nfcmrvl_spi_int_irq_thread_fn': (.text+0x142abc): undefined reference to `nci_spi_read' This clarifies the dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: caf6e49bf6d0 ("NFC: nfcmrvl: add spi driver") Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-27NFC: nfcmrvl: update device tree bindings for Marvell NFCVincent Cuissard
Align NFC bindgins to use marvell instead of mrvl. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: nfcmrvl: add spi driverVincent Cuissard
This driver adds the support of SPI-based Marvell NFC controller. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: nfcmrvl: add i2c driverVincent Cuissard
This driver adds the support of I2C-based Marvell NFC controller. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: nfcmrvl: configure head/tail room values per low level driversVincent Cuissard
Low-level drivers may need to add some data before and/or after NCI packet. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: nfcmrvl: add firmware download supportVincent Cuissard
Implement firmware download protocol for Marvell NFC controllers. This protocol is based on NCI frames that's why parts of its implementation use some NCI generic functions. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: nfcmrvl: remove unneeded version definesVincent Cuissard
Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st21nfca: Add support for proprietary commandsChristophe Ricard
Add support for proprietary commands useful mainly for factory testings. Here is a list: - FACTORY_MODE: Allow to set the driver into a mode where no secure element are activated. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example RF trimmings or low level drivers configurations (I2C, SPI, SWP). - HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing table following RF technology, CLF mode or protocol. - HCI_DM_GET_INFO: Allow to retrieve CLF information. - HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low level drivers configurations or RF trimmings. - HCI_DM_LOAD: Allow to load a firmware into the CLF. A complete packet can be more than 8KB. - HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF configuration changes without CLF power off. - HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the white list). - HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF technology. When using this command to anti-collision is done. - HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF connectivity. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: Replace st21nfcb by st_nci in makefileChristophe Ricard
Replace 1 missing st21nfcb by st_nci Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: remove duplicated skb dumpChristophe Ricard
Remove SPI_DUMP_SKB and I2C_DUMP_SKB as skb is already dumped in ndlc layer. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: Disable irq when powering the device upChristophe Ricard
Upon some conditions (timing, CLF errors, platform errors...), the irq might be already active when powering the device. Add irq_active variable as a guard to avoid kernel warning message Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st21nfca: Add error messages for unexpected HCI eventsChristophe Ricard
Potentially an unexpected HCI event may occur because of a firmware bug. It could be transparent for the user but we should at least log it. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st21nfca: Add few code style fixesChristophe Ricard
Add a minor code style fixes Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: Add few code style fixesChristophe Ricard
Add some few code style fixes. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: netlink: Add mode parameter to deactivate_target functionsChristophe Ricard
In order to manage in a better way the nci poll mode state machine, add mode parameter to deactivate_target functions. This way we can manage different target state. mode parameter make sense only in nci core. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st21nfca: Fix host_list verification after SEactivationChristophe Ricard
A secure element can be activated in different order. The host_list is updated keeping a fixed order: <terminal_host_id><uicc_id><ese_id>. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>