summaryrefslogtreecommitdiff
path: root/drivers/nfc/st21nfca
AgeCommit message (Collapse)Author
2014-09-08NFC: st21nfca: Add condition to make sure atr_req->length is valid.Christophe Ricard
gb_len in st21nfca_tm_send_atr_res can be negative. Not checking for that could lead to a potential kernel oops. We now make sure that atr_req->length > sizeof(struct st21nfca_atr_req) to avoid such situation. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-08NFC: st21nfca: Remove useless IS_ERR(skb) conditionsChristophe Ricard
skb is already verified to be not null from the below hci layer. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-08NFC: st21nfca: Remove useless err == 0 conditionChristophe Ricard
On top of st21nfca_im_recv_atr_res_cb and st21nfca_im_recv_dep_res_cb a condition if (err != 0) is present. Because err is never modified in the code err will always be 0 at the end. The condition can be removed. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-08NFC: st21nfca: Change nfcid3 generationChristophe Ricard
nfcid3 is based on sensf_res value. target->sensf is never NULL as it is a table. Check the sensf_res_len instead to make sure sensf_res is set or not. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-07NFC: st21nfca: Remove useless new line in nfc_err callChristophe Ricard
Remove a useless new line in nfc_err call. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-07NFC: st21nfca: Fix logic when setting session_idChristophe Ricard
If dev_num >= ST21NFCA_NUM_DEVICES, the driver was returning an incorrect success return code. Once dev_num is set, it was not stated as busy. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-07NFC: st21nfca: Fix scripts/checkpatch.pl warnings "Missing a blank line ↵Christophe Ricard
after declarations" Fixing scripts/checkpatch.pl warning "Missing a blank line after declarations" in: - st21nfca.c: - check_presence after fwi variable declaration. - get_frame_size after len variable declaration. - st21nfca_hci_i2c_repack after "i, j, r, size" variable declaration. - st21nfca_dep.c st21nfca_tx_work after skb pointer declaration. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-07NFC: st21nfca: Fix sparse: cast to restricted __be32Christophe Ricard
Fixing "sparse: cast to restricted __be32" message when building with make C=1 CF=-D__CHECK_ENDIAN__ Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-07NFC: st21nfca: Convert to use devm_gpio_request_oneAxel Lin
This simplifies the code a bit. Acked-by: Christophe RICARD <christophe-h.ricard@st.com> Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-07NFC: st21nfca: Remove double assignment of .owner in struct device_driverEmil Goode
The .owner member of struct device_driver is assigned THIS_MODULE twice. Introduced by: commit c44cb2edd01ca31471d9385f0895891b006ab904 ("NFC: dts: st21nfca: Add device-tree (Open Firmware) support to st21nfca") Acked-by: Christophe RICARD <christophe-h.ricard@st.com> Signed-off-by: Emil Goode <emilgoode@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-09-07NFC: st21nfca: Fix potential depmod dependency cycleChristophe Ricard
In the previous makefile 2 modules were generated for CONFIG_NFC_ST21NFCA (st21nfca.ko and st21nfca_dep.ko). Merge both of them into st21nfca_hci.ko and fix a potential depmod dependency cycle, similar to the one we saw on st21nfcb: depmod: WARNING: found 6 modules in dependency cycles! depmod: WARNING: /lib/modules/3.17.0-rc3-00002-g7505cea/kernel/drivers/nfc/st21nfcb/st21nfcb.ko in dependency cycle! depmod: WARNING: /lib/modules/3.17.0-rc3-00002-g7505cea/kernel/drivers/nfc/st21nfcb/ndlc.ko in dependency cycle! depmod: WARNING: /lib/modules/3.17.0-rc3-00002-g7505cea/kernel/net/rfkill/rfkill.ko in dependency cycle! depmod: WARNING: /lib/modules/3.17.0-rc3-00002-g7505cea/kernel/net/nfc/nfc.ko in dependency cycle! depmod: WARNING: /lib/modules/3.17.0-rc3-00002-g7505cea/kernel/net/nfc/nci/nci.ko in dependency cycle! depmod: WARNING: /lib/modules/3.17.0-rc3-00002-g7505cea/kernel/lib/crc-ccitt.ko in dependency cycle! ./scripts/depmod.sh: line 57: 23387 Segmentation fault (core dumped) "$DEPMOD" "$@" "$KERNELRELEASE" $SYMBOL_PREFIX make: *** [_modinst_post] Error 139 Reported-by: Daniel Wagner <wagi@monom.org> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-23NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target modeChristophe Ricard
Support for Initiator and Target mode with ISO18092 commands support: - ATR_REQ/ATR_RES - PSL_REQ/PSL_RES - DEP_REQ/DEP_RES Work based on net/nfc/digital_dep.c. st21nfca is using: - Gate reader F for P2P in initiator mode. - Gate card F for P2P in target mode. Felica tag and p2p are differentiated with NFCID2. When starting with 01FE it is acting in p2p mode. On complete_target_discovered on ST21NFCA_RF_READER_F_GATE supported_protocols is set to NFC_PROTO_NFC_DEP_MASK for P2P. Tested against: Nexus S, Galaxy S2, Galaxy S3, Galaxy S3 Mini, Nexus 4 & Nexus 5. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-23NFC: st21nfca: Implement stop_poll HCI hookChristophe Ricard
Send DM_DISCONNECT command to disconnect Terminal Host from the HCI network. - The persistent states of the terminal host pipes, including registry values, are not modifies. Therefore, there is no NVRAM update to disconnect the terminal host. - The terminal host RF card gates are disabled which means that there will be no event related to card RF gates until communication has been restored. - The terminal host RF reader request is reset so the RF reader polling for terminal host is disabled. To restore the communication, the terminal host can send any HCI command or event. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-23NFC: st21nfca: Improve read length sequence for P2P mode.Christophe Ricard
A DEP_RES with a SUPERVISOR PDU can be up to 16 bytes long. In order to avoid useless read during p2p, extend first read sequence to 16 and reduce third sequence to 12 to keep same total on the full sequence. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-23NFC: st21nfca: Improved start of frame detectionChristophe Ricard
A start of frame is 7E 00 not only 7E. Make sure the first read sequence is starting with 7E 00. For example: 7E FF FF FF FF is as a correct crc but it is a bad frame. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-07-23NFC: st21nfca: Free buffer in case no data are retrieved.Christophe Ricard
In case no data are retrieve through i2c or one specific case is not handled. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-20NFC: st21nfca: Add ISO15693 Reader/Writer supportChristophe Ricard
Add support for ISO/IEC 15693 RF technology and Type 5 tags. ISO15963 is using proprietary gate 12. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-20NFC: st21nfca: Improve load_sessionChristophe Ricard
In case anybody uses previous patchset with the CLF, add a check to make sure missing pipe are created. st21nfca returns its pipe list in the creation order (most recent latest). Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-20NFC: dts: st21nfca: Add device-tree (Open Firmware) support to st21nfcaChristophe Ricard
Add functions to recover hardware resources from the device-tree when not provided by the platform data. Based on pn544 devicetree implementation Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-05NFC: st21nfca: Free buffer when a bad frame is detectedChristophe Ricard
When a bad frame is detected for a bad crc. We were reallocating and loosing the previous frame pointer. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-05NFC: st21nfca: Synchronize i2c Tx and Rx pathChristophe Ricard
Stabilize communication by using a mutex. This avoids running a write transaction during a read retry or a read transaction during a write retry. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-05NFC: st21nfca: Improved i2c Rx data correctness checkChristophe Ricard
A frame starts with ST21NFCA_SOF_EOF(0x7e) + 0x00. A frame ends with ST21NFCA_SOF_EOF(0x7e). It is possible that the i2c macrocell is stopped for other communication interfaces with highest priority(RF or SWP). This can be seen with some 0xFF data at the end of a received shdlc buffer. If this happen we need to discard the frame because the CLF will repeat it. In order to push accurate data to hci layer, we add the following fix: - Instead of looking for the first 0x7e in the frame, check that the last received byte is 0x7e. - Check that the first frame reception block start with start of frame(0x7e 0x00). If not, clear the buffer. - Check that the next frame reception block do not start with start of frame(0x7e). If so, clear the buffer. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-05NFC: st21nfca: Fix st21nfca_hci_remove_len_crc tail room handlingChristophe Ricard
There is no byte stuffing when data are stored in skb. TAILROOM is 2 byte crc + 1 byte eof. st21nfca_hci_remove_len_crc was doing an incorrect operation on the TAILROOM data. If shdlc timer T2 is triggered, it will request to send the same data. Before every hci data was lost after st21nfca_hci_remove_len_crc. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-05NFC: st21nfca: Fix incorrect byte stuffing revocationChristophe Ricard
Byte stuffing was not correctly removed after a i2c read operation. This was causing improper crc calculation when byte stuffing was applied to more than 1 byte. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-05NFC: st21nfca: Remove few useless includeChristophe Ricard
Remove unneeded includes from i2c.c Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-04-22NFC: st21nfca: Improve st21nfca initialization by handling reboot properlyChristophe Ricard
Change in st21nfca_hci_platform_init in order to handle in a better way the internal reboot command. Once the reboot is completed, the driver expect to receive a 0x7e filled buffer. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-04-22NFC: st21nfca: Reworked st21nfca_request_resourcesChristophe Ricard
Remove struct st21nfca_i2c_phy* as this parameter can be retrieve through i2c_get_clientdata(client) Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-04-22NFC: st21nfca: st21nfca_hci_i2c_probe returns st21nfca_hci_probe result.Christophe Ricard
st21nfca_hci_probe return 0 in case of successful call and a different value in any other cases. There is no need to check for st21nfca_hci_probe return as this will be checked after st21nfca_hci_i2c_probe is completed. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-04-22NFC: st21nfca: Add __packed to struct st21nfca_pipe_infoChristophe Ricard
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-04-22NFC: st21nfca: Remove sporadic wait_tab variable from functions.Christophe Ricard
wait_tab variable is already global and may create conflicts. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-04-22NFC: st21nfca: Fix warning: array subscript is above array boundsChristophe Ricard
Fix "warning: array subscript is above array bounds" in load_session Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-04-22NFC: st21nfca: Fix sparse: cast to restricted __be16Christophe Ricard
Fixing "sparse: cast to restricted __be16" message when building with make C=1 CF=-D__CHECK_ENDIAN__ Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-04-22NFC: st21nfca: Implement load_session HCI hookChristophe Ricard
This implementation rely on the ST21NFCA_DEVICE_MGNT_GATE and ST21NFCA_DM_GETINFO proprietary gates commands. First we are retrieving a pipe list available on the CLF with the ST21NFCA_DM_GETINFO_PIPE_LIST parameter. A gate<->pipe table match is done with ST21NFCA_DM_GETINFO_PIPE_INFO for each pipe. If the pipe is created and open, we fill st21nfca_gates table. If the pipe is create but closed or is not created we keep the gate with NFC_HCI_INVALID_PIPE. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-04-22NFC: ST21NFCA: Add driver for STMicroelectronics ST21NFCA NFC ChipChristophe Ricard
Add driver for STMicroelectronics ST21NFCA NFC controller. ST21NFCA is using HCI protocol, shdlc as LLC layer & I2C as communication protocol. Adding support for Reader/Writer mode with Tag type 1/2/3/4 A & B. It is using proprietary gate 15 for ISO14443-3 such as type 1 & type 2 tags. It is using proprietary gate 14 for type F tags. ST21NFCA_DEVICE_MGNT_GATE gives access to proprietary CLF configuration. Standard gate for ISO14443-4 A (13) & B (11) are also used. ST21NFCA specific mecanism: One particular point to notice for the data handling is that frame does not contain any length value. Therefore the i2c part of this driver is managing the reception with a read length sequence until the end of frame (0x7e) is reached. In order to avoid conflict between sof & eof a mecanism called byte stuffing concist of an escape byte (0x7d) insertion before special byte (0x7e, 0x7d). The special byte is then xored with 0x20. In this driver, When data are available in the CLF, the interrupt gpio is driven to active state and triggered an interrupt. Once the i2c_master_recv start, the interrupt gpio is driven to idle state until its complete. If the frame is incomplete or data are still available, interrupts will be triggered again. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 12:40:06 +0000