summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2014-01-23qlcnic: Enhance Tx timeout debugging.Himanshu Madhani
o Dump each Tx queue details with all descriptors, queue indices and Tx queue stats to imporve data colletion in situations where Tx timeout occurs. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-23qlcnic: Use bool for rx_mac_learn.Sucheta Chakraborty
o Use boolean type instead of u8. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-23bonding: fix u64 divisionNikolay Aleksandrov
After the option conversion downdelay and updelay divide a u64 and on a 32 bit this causes the following errors: ERROR: "__udivdi3" [drivers/net/bonding/bonding.ko] undefined! ERROR: "__umoddi3" [drivers/net/bonding/bonding.ko] undefined! Fix it by using a normal int instead because newval->value is capped at INT_MAX by the way the option is defined. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-23sfc: Use the correct maximum TX DMA ring size for SFC9100Ben Hutchings
As part of a workaround for a hardware erratum in the SFC9100 family (SF bug 35388), the TX_DESC_UPD_DWORD register address is also used for communicating with the event block, and only descriptor pointer values < 2048 are valid. If the TX DMA ring size is increased to 4096 descriptors (which the firmware still allows) then we may write a descriptor pointer value >= 2048, which has entirely different and undesirable effects! Limit the TX DMA ring size correctly when this workaround is in effect. Fixes: 8127d661e77f ('sfc: Add support for Solarflare SFC9100 family') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-23net/vxlan: Share RX skb de-marking and checksum checks with ovsOr Gerlitz
Make sure the practice set by commit 0afb166 "vxlan: Add capability of Rx checksum offload for inner packet" is applied when the skb goes through the portion of the RX code which is shared between vxlan netdevices and ovs vxlan port instances. Cc: Joseph Gasparakis <joseph.gasparakis@intel.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-23tulip: cleanup by using ARRAY_SIZE()Dan Carpenter
In this situation then ARRAY_SIZE() and sizeof() are the same, but we're really dealing with array indexes and not byte offsets so ARRAY_SIZE() is cleaner. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-23net/cxgb4: Don't retrieve stats during recoveryGavin Shan
We possibly retrieve the adapter's statistics during EEH recovery and that should be disallowed. Otherwise, it would possibly incur replicate EEH error and EEH recovery is going to fail eventually. The patch reuses statistics lock and checks net_device is attached before going to retrieve statistics, so that the problem can be avoided. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-23net/cxgb4: Avoid disabling PCI device for towiceGavin Shan
If we have EEH error happens to the adapter and we have to remove it from the system for some reasons (e.g. more than 5 EEH errors detected from the device in last hour), the adapter will be disabled for towice separately by eeh_err_detected() and remove_one(), which will incur following unexpected backtrace. The patch tries to avoid it. WARNING: at drivers/pci/pci.c:1431 CPU: 12 PID: 121 Comm: eehd Not tainted 3.13.0-rc7+ #1 task: c0000001823a3780 ti: c00000018240c000 task.ti: c00000018240c000 NIP: c0000000003c1e40 LR: c0000000003c1e3c CTR: 0000000001764c5c REGS: c00000018240f470 TRAP: 0700 Not tainted (3.13.0-rc7+) MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 28000024 XER: 00000004 CFAR: c000000000706528 SOFTE: 1 GPR00: c0000000003c1e3c c00000018240f6f0 c0000000010fe1f8 0000000000000035 GPR04: 0000000000000000 0000000000000000 00000000003ae509 0000000000000000 GPR08: 000000000000346f 0000000000000000 0000000000000000 0000000000003fef GPR12: 0000000028000022 c00000000ec93000 c0000000000c11b0 c000000184ac3e40 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 c0000000009398d8 c00000000101f9c0 c0000001860ae000 GPR28: c000000182ba0000 00000000000001f0 c0000001860ae6f8 c0000001860ae000 NIP [c0000000003c1e40] .pci_disable_device+0xd0/0xf0 LR [c0000000003c1e3c] .pci_disable_device+0xcc/0xf0 Call Trace: [c0000000003c1e3c] .pci_disable_device+0xcc/0xf0 (unreliable) [d0000000073881c4] .remove_one+0x174/0x320 [cxgb4] [c0000000003c57e0] .pci_device_remove+0x60/0x100 [c00000000046396c] .__device_release_driver+0x9c/0x120 [c000000000463a20] .device_release_driver+0x30/0x60 [c0000000003bcdb4] .pci_stop_bus_device+0x94/0xd0 [c0000000003bcf48] .pci_stop_and_remove_bus_device+0x18/0x30 [c00000000003f548] .pcibios_remove_pci_devices+0xa8/0x140 [c000000000035c00] .eeh_handle_normal_event+0xa0/0x3c0 [c000000000035f50] .eeh_handle_event+0x30/0x2b0 [c0000000000362c4] .eeh_event_handler+0xf4/0x1b0 [c0000000000c12b8] .kthread+0x108/0x130 [c00000000000a168] .ret_from_kernel_thread+0x5c/0x74 Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-23drivers: net: cpsw: enable promiscuous mode supportMugunthan V N
Enable promiscuous mode support for CPSW. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-23ath9k: Fix RX interrupt mitigationSujith Manoharan
The threshold values for RX interrupt mitigation are different for AR9003 and AR9002 families. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-23rt2x00: rt2800usb: mark D-Link DWA-137 as supportedRoman Dubtsov
Signed-off-by: Roman Dubtsov <dubtsov@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-23ath9k: Fix code mistakeSujith Manoharan
The commit "ath9k: Process GTT interrupts" accidentally had a line that was commented out. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-23b43: fix the wrong assignment of status.freq in b43_rx()ZHAO Gang
Use the right function to update frequency value. If rx skb is probe response or beacon, the wrong frequency value can cause problem that bss info can't be updated when it should be. Cc: <stable@vger.kernel.org> Fixes: 8318d78a44d4 ("cfg80211 API for channels/bitrates, mac80211 and driver conversion") Signed-off-by: ZHAO Gang <gamerh2o@gmail.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-23mwifiex: fix wakeup on magic packetAndreas Fenkart
8 bytes preamble 14 bytes src/dst/eth_type 6 bytes 0xff:0xff.. http://en.wikipedia.org/wiki/Wake-on-LAN#Magic_packet http://en.wikipedia.org/wiki/EtherType This will fail if we VLAN or the magic packet is encapsulated as a UDP packet... Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-23Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2014-01-22Merge branch 'ip-roce' into for-nextRoland Dreier
Conflicts: drivers/infiniband/hw/mlx4/main.c
2014-01-22Merge branches 'cma', 'cxgb4', 'flowsteer', 'ipoib', 'misc', 'mlx4', 'mlx5', ↵Roland Dreier
'ocrdma', 'qib', 'srp' and 'usnic' into for-next
2014-01-22IB/mlx5: Abort driver cleanup if teardown hca failsEli Cohen
Do not continue with cleanup flow. If this ever happens we can check which resources remained open. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22mlx5_core: Fix PowerPC supportEli Cohen
1. Fix derivation of sub-page index from the dma address in free_4k. 2. Fix the DMA address passed to dma_unmap_page by masking it properly. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22mlx5_core: Improve debugfs readabilityEli Cohen
Use strings to display transport service or state of QPs. Use numeric value for MTU of a QP. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/mlx5: Add support for resize CQEli Cohen
Implement resize CQ which is a mandatory verb in mlx5. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/mlx5: Implement modify CQEli Cohen
Modify CQ is used by ULPs like IPoIB to change moderation parameters. This patch adds support in mlx5. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22mlx5_core: Use mlx5 core style warningEli Cohen
Use mlx5_core_warn(), which is the standard warning emitter function, instead of pr_warn(). Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22IB/mlx5: Clear out struct before create QP commandEli Cohen
Output structs are expected by firmware to be cleared when a command is called. Clear the "out" struct instead of "dout" which is used only later. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22mlx5_core: Fix out arg size in access_register commandHaggai Eran
The output size should be the sum of the core access reg output struct plus the size of the specific register data provided by the caller. Signed-off-by: Haggai Eran <haggaie@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-01-22Merge tag 'stable/for-linus-3.14-rc0-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen updates from Konrad Rzeszutek Wilk: "Two major features that Xen community is excited about: The first is event channel scalability by David Vrabel - we switch over from an two-level per-cpu bitmap of events (IRQs) - to an FIFO queue with priorities. This lets us be able to handle more events, have lower latency, and better scalability. Good stuff. The other is PVH by Mukesh Rathor. In short, PV is a mode where the kernel lets the hypervisor program page-tables, segments, etc. With EPT/NPT capabilities in current processors, the overhead of doing this in an HVM (Hardware Virtual Machine) container is much lower than the hypervisor doing it for us. In short we let a PV guest run without doing page-table, segment, syscall, etc updates through the hypervisor - instead it is all done within the guest container. It is a "hybrid" PV - hence the 'PVH' name - a PV guest within an HVM container. The major benefits are less code to deal with - for example we only use one function from the the pv_mmu_ops (which has 39 function calls); faster performance for syscall (no context switches into the hypervisor); less traps on various operations; etc. It is still being baked - the ABI is not yet set in stone. But it is pretty awesome and we are excited about it. Lastly, there are some changes to ARM code - you should get a simple conflict which has been resolved in #linux-next. In short, this pull has awesome features. Features: - FIFO event channels. Key advantages: support for over 100,000 events (2^17), 16 different event priorities, improved fairness in event latency through the use of FIFOs. - Xen PVH support. "It’s a fully PV kernel mode, running with paravirtualized disk and network, paravirtualized interrupts and timers, no emulated devices of any kind (and thus no qemu), no BIOS or legacy boot — but instead of requiring PV MMU, it uses the HVM hardware extensions to virtualize the pagetables, as well as system calls and other privileged operations." (from "The Paravirtualization Spectrum, Part 2: From poles to a spectrum") Bug-fixes: - Fixes in balloon driver (refactor and make it work under ARM) - Allow xenfb to be used in HVM guests. - Allow xen_platform_pci=0 to work properly. - Refactors in event channels" * tag 'stable/for-linus-3.14-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (52 commits) xen/pvh: Set X86_CR0_WP and others in CR0 (v2) MAINTAINERS: add git repository for Xen xen/pvh: Use 'depend' instead of 'select'. xen: delete new instances of __cpuinit usage xen/fb: allow xenfb initialization for hvm guests xen/evtchn_fifo: fix error return code in evtchn_fifo_setup() xen-platform: fix error return code in platform_pci_init() xen/pvh: remove duplicated include from enlighten.c xen/pvh: Fix compile issues with xen_pvh_domain() xen: Use dev_is_pci() to check whether it is pci device xen/grant-table: Force to use v1 of grants. xen/pvh: Support ParaVirtualized Hardware extensions (v3). xen/pvh: Piggyback on PVHVM XenBus. xen/pvh: Piggyback on PVHVM for grant driver (v4) xen/grant: Implement an grant frame array struct (v3). xen/grant-table: Refactor gnttab_init xen/grants: Remove gnttab_max_grant_frames dependency on gnttab_init. xen/pvh: Piggyback on PVHVM for event channels (v2) xen/pvh: Update E820 to work with PVH (v2) xen/pvh: Secondary VCPU bringup (non-bootup CPUs) ...
2014-01-22team: Don't allow team devices to change network namespaces.Weilong Chen
Like bonding, team as netdevice doesn't cross netns boundaries. Team ports and team itself live in same netns. Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: Don't allow bond devices to change network namespaces.Weilong Chen
Like bridge, bonding as netdevice doesn't cross netns boundaries. Bonding ports and bonding itself live in same netns. Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: convert netlink to use slave data info apiJiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22rtnetlink: put "BOND" into nl attribute names which are related to bondingJiri Pirko
Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: change name of sysfs dir for bonding slavesJiri Pirko
Allow user to identify easily what the attributes are related to. Change the name of the group to "bonding_slave" to be similar to master which is named "bonding". Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22tuntap: Fix for a race in accessing numqueuesDominic Curran
A patch for fixing a race between queue selection and changing queues was introduced in commit 92bb73ea2("tuntap: fix a possible race between queue selection and changing queues"). The fix was to prevent the driver from re-reading the tun->numqueues more than once within tun_select_queue() using ACCESS_ONCE(). We have been experiancing 'Divide-by-zero' errors in tun_net_xmit() since we moved from 3.6 to 3.10, and believe that they come from a simular source where the value of tun->numqueues changes to zero between the first and a subsequent read of tun->numqueues. The fix is a simular use of ACCESS_ONCE(), as well as a multiply instead of a divide in the if statement. Signed-off-by: Dominic Curran <dominic.curran@citrix.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Maxim Krasnyansky <maxk@qti.qualcomm.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Max Krasnyansky <maxk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual rocket science stuff from trivial.git" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) neighbour.h: fix comment sched: Fix warning on make htmldocs caused by wait.h slab: struct kmem_cache is protected by slab_mutex doc: Fix typo in USB Gadget Documentation of/Kconfig: Spelling s/one/once/ mkregtable: Fix sscanf handling lp5523, lp8501: comment improvements thermal: rcar: comment spelling treewide: fix comments and printk msgs IXP4xx: remove '1 &&' from a condition check in ixp4xx_restart() Documentation: update /proc/uptime field description Documentation: Fix size parameter for snprintf arm: fix comment header and macro name asm-generic: uaccess: Spelling s/a ny/any/ mtd: onenand: fix comment header doc: driver-model/platform.txt: fix a typo drivers: fix typo in DEVTMPFS_MOUNT Kconfig help text doc: Fix typo (acces_process_vm -> access_process_vm) treewide: Fix typos in printk drivers/gpu/drm/qxl/Kconfig: reformat the help text ...
2014-01-22bonding: clean the primary slave if there is no slave matching new primarydingtianhong
If the new primay is not matching any slave in the bond, the bond should record it to params, clean the primary slave and select a new active slave. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22net: vxlan: convert to act as a pernet subsystemDaniel Borkmann
As per suggestion from Eric W. Biederman, vxlan should be using {un,}register_pernet_subsys() instead of {un,}register_pernet_device() to ensure the vxlan_net structure is initialized before and cleaned up after all network devices in a given network namespace i.e. when dealing with network notifiers. This is similarly handeled already in commit 91e2ff3528ac ("net: Teach vlans to cleanup as a pernet subsystem") and, thus, improves upon fd27e0d44a89 ("net: vxlan: do not use vxlan_net before checking event type"). Just as in 91e2ff3528ac, we do not need to explicitly handle deletion of vxlan devices as network namespace exit calls dellink on all remaining virtual devices, and rtnl_link_unregister() calls dellink on all outstanding devices in that network namespace, so we can entirely drop the pernet exit operation as well. Moreover, on vxlan module exit, rcu_barrier() is called by netns since commit 3a765edadb28 ("netns: Add an explicit rcu_barrier to unregister_pernet_{device|subsys}"), so this may be omitted. Tested with various scenarios and works well on my side. Suggested-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: convert slaves to use the new option APINikolay Aleksandrov
This patch adds the necessary changes so slaves would use the new bonding option API. Also move the option to its own set function in bond_options.c and fix some style errors. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: convert lp_interval to use the new option APINikolay Aleksandrov
This patch adds the necessary changes so lp_interval would use the new bonding option API. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: convert resend_igmp to use the new option APINikolay Aleksandrov
This patch adds the necessary changes so resend_igmp would use the new bonding option API. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: convert all_slaves_active to use the new option APINikolay Aleksandrov
This patch adds the necessary changes so all_slaves_active would use the new bonding option API. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: convert queue_id to use the new option APINikolay Aleksandrov
This patch adds the necessary changes so queue_id would use the new bonding option API. Also move it to its own set function in bond_options.c and fix some style errors. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: convert active_slave to use the new option APINikolay Aleksandrov
This patch adds the necessary changes so active_slave would use the new bonding option API. Also some trivial/style fixes. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: convert use_carrier to use the new option APINikolay Aleksandrov
This patch adds the necessary changes so use_carrier would use the new bonding option API. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: convert primary_reselect to use the new option APINikolay Aleksandrov
This patch adds the necessary changes so primary_reselect would use the new bonding option API. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: convert primary to use the new option APINikolay Aleksandrov
This patch adds the necessary changes so primary would use the new bonding option API. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: convert miimon to use the new option APINikolay Aleksandrov
This patch adds the necessary changes so miimon would use the new bonding option API. The "default" definition has been removed as it was 0. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: convert num_peer_notif to use the new option APINikolay Aleksandrov
This patch adds the necessary changes so num_peer_notif would use the new bonding option API. When the auto-sysfs generation is done an alias should be added for this option as there're currently 2 entries in sysfs for it. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: convert ad_select to use the new option APINikolay Aleksandrov
This patch adds the necessary changes so ad_select would use the new bonding option API. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: convert min_links to use the new option APINikolay Aleksandrov
This patch adds the necessary changes so min_links would use the new bonding option API. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: convert lacp_rate to use the new option APINikolay Aleksandrov
This patch adds the necessary changes so lacp_rate would use the new bonding option API. Also some trivial/style error fixes. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-22bonding: convert updelay to use the new option APINikolay Aleksandrov
This patch adds the necessary changes so updelay would use the new bonding option API. Also some trivial style fixes. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 21:03:38 +0000