summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2013-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "It's been a while since my last pull request so quite a few fixes have piled up." Indeed. 1) Fix nf_{log,queue} compilation with PROC_FS disabled, from Pablo Neira Ayuso. 2) Fix data corruption on some tg3 chips with TSO enabled, from Michael Chan. 3) Fix double insertion of VLAN tags in be2net driver, from Sarveshwar Bandi. 4) Don't have TCP's MD5 support pass > PAGE_SIZE page offsets in scatter-gather entries into the crypto layer, the crypto layer can't handle that. From Eric Dumazet. 5) Fix lockdep splat in 802.1Q MRP code, also from Eric Dumazet. 6) Fix OOPS in netfilter log module when called from conntrack, from Hans Schillstrom. 7) FEC driver needs to use netif_tx_{lock,unlock}_bh() rather than the non-BH disabling variants. From Fabio Estevam. 8) TCP GSO can generate out-of-order packets, fix from Eric Dumazet. 9) vxlan driver doesn't update 'used' field of fdb entries when it should, from Sridhar Samudrala. 10) ipv6 should use kzalloc() to allocate inet6 socket cork options, otherwise we can OOPS in ip6_cork_release(). From Eric Dumazet. 11) Fix races in bonding set mode, from Nikolay Aleksandrov. 12) Fix checksum generation regression added by "r8169: fix 8168evl frame padding.", from Francois Romieu. 13) ip_gre can look at stale SKB data pointer, fix from Eric Dumazet. 14) Fix checksum handling when GSO is enabled in bnx2x driver with certain chips, from Yuval Mintz. 15) Fix double free in batman-adv, from Martin Hundebøll. 16) Fix device startup synchronization with firmware in tg3 driver, from Nithin Sujit. 17) perf networking dropmonitor doesn't work at all due to mixed up trace parameter ordering, from Ben Hutchings. 18) Fix proportional rate reduction handling in tcp_ack(), from Nandita Dukkipati. 19) IPSEC layer doesn't return an error when a valid state is detected, causing an OOPS. Fix from Timo Teräs. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits) be2net: bug fix on returning an invalid nic descriptor tcp: xps: fix reordering issues net: Revert unused variable changes. xfrm: properly handle invalid states as an error virtio_net: enable napi for all possible queues during open tcp: bug fix in proportional rate reduction. net: ethernet: sun: drop unused variable net: ethernet: korina: drop unused variable net: ethernet: apple: drop unused variable qmi_wwan: Added support for Cinterion's PLxx WWAN Interface perf: net_dropmonitor: Remove progress indicator perf: net_dropmonitor: Use bisection in symbol lookup perf: net_dropmonitor: Do not assume ordering of dictionaries perf: net_dropmonitor: Fix symbol-relative addresses perf: net_dropmonitor: Fix trace parameter order net: fec: use a more proper compatible string for MVF type device qlcnic: Fix updating netdev->features qlcnic: remove netdev->trans_start updates within the driver qlcnic: Return proper error codes from probe failure paths tg3: Update version to 3.132 ...
2013-05-23be2net: bug fix on returning an invalid nic descriptorWei Yang
In function be_get_nic_desc(), it will go through the descriptor array returned from f/w. By comparing the desc_type field, it determines whether there is a nic descriptor in the array or not. In the case of no nic descriptor, this function should return NULL. The code may return an invalide descriptor, when there is no nic descriptor in the array and the desc_count is less than MAX_RESOURCE_DESC. In this case, even there is no nic descriptor, it will still return the lase descriptor since the i doesn't equal to MAX_RESOURCE_DESC. This patch fix this issue by returning the descriptor when find it and return NULL for other cases. Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com> Reviewed-by: Gavin Shan <shangw@linux.vnet.ibm.com> Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Acked-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23net: Revert unused variable changes.David S. Miller
This reverts commits: c573972c111eb4c6b3f3250ad71e7c75cc799833 1a5904342c7380ceddd61c0b37544d752d0b1433 da2e2c214953f37c2a6be20226537ca5a329724c They were meant for net-next not net. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-23Merge tag 'usb-3.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are a number of tiny USB bugfixes / new device ids for 3.10-rc2 The majority of these are USB gadget fixes, but they are all small. Other than that, some USB host controller fixes, and USB serial driver fixes for problems reported with them. Also hopefully a fixed up USB_OTG Kconfig dependancy, that one seems to be almost impossible to get right for all of the different platforms these days." * tag 'usb-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (56 commits) USB: cxacru: potential underflow in cxacru_cm_get_array() USB: ftdi_sio: Add support for Newport CONEX motor drivers USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card usb: ohci: fix goto wrong tag in err case usb: isp1760-if: fix memleak when platform_get_resource fail usb: ehci-s5p: fix memleak when fallback to pdata USB: serial: clean up chars_in_buffer USB: ti_usb_3410_5052: fix chars_in_buffer overhead USB: io_ti: fix chars_in_buffer overhead USB: ftdi_sio: fix chars_in_buffer overhead USB: ftdi_sio: clean up get_modem_status USB: serial: add generic wait_until_sent implementation USB: serial: add wait_until_sent operation USB: set device dma_mask without reference to global data USB: Blacklisted Cinterion's PLxx WWAN Interface usb: option: Add Telewell TW-LTE 4G USB: EHCI: remove bogus #error USB: reset resume quirk needed by a hub USB: usb-stor: realtek_cr: Fix compile error usb, chipidea: fix link error when USB_EHCI_HCD is a module ...
2013-05-23virtio_net: enable napi for all possible queues during openJason Wang
Commit 55257d72bd1c51f25106350f4983ec19f62ed1fa (virtio-net: fill only rx queues which are being used) only does the napi enabling during open for curr_queue_pairs. This will break multiqueue receiving since napi of new queues were still disabled after changing the number of queues. This patch fixes this by enabling napi for all possible queues during open. Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22net: ethernet: sun: drop unused variableEmilio López
Commit bfd428d ("net: ethernet: sun: initialize variables directly") dropped the only loop that was using i but did not remove the actual variable, therefore causing a warning when building. This patch drops the now redundant line. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22net: ethernet: korina: drop unused variableEmilio López
Commit e998fd4 ("net: ethernet: korina: initialize variables directly") dropped the only loop that was using i but did not remove the actual variable, therefore causing a warning when building. This patch drops the now redundant line. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22net: ethernet: apple: drop unused variableEmilio López
Commit 3b0aaef ("net: ethernet: apple: initialize variables directly") dropped the only loop that was using i but did not remove the actual variable, therefore causing a warning when building. This patch drops the now redundant line. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22qmi_wwan: Added support for Cinterion's PLxx WWAN InterfaceHans-Christoph Schemmel
Added support for Cinterion's PLxx WWAN Interface by adding QMI_FIXED_INTF with Cinterion's Vendor ID as well as Product ID and WWAN Interface Number. Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> Signed-off-by: Christian Schmiedl <christian.schmiedl@gemalto.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22net: fec: use a more proper compatible string for MVF type deviceShawn Guo
MVF is a family while MVF600 is a particular SoC in the family. We generally prefer to use SoC rather than family name in compatible string to define a particular type of fec device. And this is how fec_dt_ids works for all those IMX fec variants. Let's change mvf to mvf600 to have it work in the same way. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22qlcnic: Fix updating netdev->featuresShahed Shaikh
o After change in EPORT features of 82xx adapter, netdev->features needs to be updated to reflect EPORT feature updates but driver was manipulating netdev->features at wrong place. o This patch uses netdev_update_features() and .ndo_fix_features() to update netdev->features properly. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22qlcnic: remove netdev->trans_start updates within the driverSony Chacko
Code is removed because netdev->trans_start updates made by the driver will be ignored by the kernel. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22qlcnic: Return proper error codes from probe failure pathsSony Chacko
Fix error paths in probe to assign proper error codes to probe return value. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22tg3: Update version to 3.132Nithin Sujir
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-22tg3: Ensure boot code has completed initialization before accessing hardwareNithin Sujir
After resetting the device, the driver waits for a signature to be updated to know that firmware has completed initialization. However, the call to tg3_poll_fw() is being done too late and we're writing to the GRC_MODE register before it has completely initialized, causing contention with firmware. This logic has existed since day one but is causing PCIE link to go down randomly at startup on one platform once every few hundred reboots. Move the tg3_poll_fw() up to before we write to the GRC_MODE register after reset. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-20Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== This pull request is intended for the 3.10 series. It contains a variety of fixes for problems discovered during the merge window and after 3.10-rc1. For the mac80211 bits, Johannes says the following: "This is what I have: * a patch from Felix to fix RCU usage in his rate table code * a patch from Ilan to add the wdev id to some notifications so they can actually be used by userspace * Sasha Levin found an issue in how hwsim handles devices * a fix for a bug in the wiphy_register() error path that's been there forever * three fixes for WoWLAN * AP mode frame matching was erroneously giving frames to all virtual AP interfaces (reported by Jouni) * a fix for HT handling in my CSA changes, found by Sujith * a fix for some locking simplifications gone wrong * Ben Greear found more cfg80211/mac80211 state confusion * and a fix for another bug found by Jouni: local state changes need to be reported by mac80211 to cfg80211 so it disconnects properly." And for the iwlwifi bits, he says: "I have fixes for a firmware crash during resume, multicast RX, aggregation and a workaround for a firmware scanning bug." Along with those... Albert Pool adds a USB ID to the rtl8192cu driver. Arend van Spriel restores a driver option support flag that had been removed from 3.9 due to a bug in that version of the driver. Felix Fietkau fixes a trio of ath9k issues with a series of small patches. Geert Uytterhoeven provides a Kconfig fix for ath9k (which you also merged, so it isn't in the diff here). Larry Finger gives us a fix for a build warning on big-endian systems for rtlwifi. Rafał Miłecki adds some core IDs to the bcma driver. Sujith Manoharan fixes a module unloading crash in ath9k, and corrects some calibration settings for AR9485. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-208139cp: reset BQL when ring tx ring clearedstephen hemminger
This patch cures transmit timeout's with DHCP observed while running under KVM. When the transmit ring is cleaned out, the Byte Queue Limit values need to be reset. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-20drivers: net: usb: rtl8150: concurrent URB bugfixPetko Manolov
This patch fixes a potential race with concurrently running asynchronous write requests. The values for device's RX control register are now stored in dynamically allocated buffers so each URB submission has it's own copy. Doing it the old way is data clobbering prone. This patch is against latest 'net' tree. Signed-off-by: Petko Manolov <petkan@nucleusys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-20Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-05-20bnx2x: Fix GSO for 57710/57711 chipsYuval Mintz
Starting with commit 91226790bbe2dbfbba48dd79d49f2b38ef10eb97 `bnx2x: use FW 7.8.17', the bnx2x driver no longer requests the FW to perform IP checksums for IPv4 packets. This behaviour needs to be revised for 57710/57711 chips - when using GSO, if the driver will not set the IP checksum flag then packets will be transmitted by the chip without a valid IP checksum, resulting in a drop of all such packets on the receiver-side. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-20r8169: fix offloaded tx checksum for small packets.françois romieu
8168evl offloaded checksums are wrong since commit e5195c1f31f399289347e043d6abf3ffa80f0005 ("r8169: fix 8168evl frame padding.") pads small packets to 60 bytes (without ethernet checksum). Typical symptoms appear as UDP checksums which are wrong by the count of added bytes. It isn't worth compensating. Let the driver checksum. Due to the skb length changes, TSO code is moved before the Tx descriptor gets written. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-19bonding: fix multiple 3ad mode sysfs race conditionsnikolay@redhat.com
When bond_3ad_get_active_agg_info() is used in all show_ad_ functions it is not protected against slave manipulation and since it walks over the slaves and uses them, this can easily result in NULL pointer dereference or use of freed memory. Both the new wrapper and the internal function are exported to the bonding as they're needed in different places. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-19bonding: arp_ip_count and arp_targets can be wrongnikolay@redhat.com
When getting arp_ip_targets if we encounter a bad IP, arp_ip_count still gets increased and all the targets after the wrong one will not be probed if arp_interval is enabled after that (unless a new IP target is added through sysfs) because of the zero entry, in this case reading arp_ip_target through sysfs will show valid targets even if there's a zero entry. Example: 1.2.3.4,4.5.6.7,blah,5.6.7.8 When retrieving the list from arp_ip_target the output would be: 1.2.3.4,4.5.6.7,5.6.7.8 but there will be a 0 entry between 4.5.6.7 and 5.6.7.8. If arp_interval is enabled after that 5.6.7.8 will never be checked because of that. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-19bonding: replace %x with %pI4 for IPv4 addressesnikolay@redhat.com
There're few pr_debug() places that can provide the IPv4 address in dotted decimal format instead which is more helpful. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-19bonding: fix set mode race conditionsnikolay@redhat.com
Changing the mode without any locking can result in multiple races (e.g. upping a bond, enslaving/releasing). Depending on which race is hit the impact can vary from incosistent bond state to kernel crash. Use RTNL to synchronize the mode setting with the dangerous races. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-18vxlan: Update vxlan fdb 'used' field after each usageSridhar Samudrala
Fix some instances where vxlan fdb 'used' field is not updated after the entry is used. v2: rename vxlan_find_mac() as __vxlan_find_mac() and create a new vxlan_find_mac() that also updates ->used field. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-18Merge branch 'devm_no_resource_check' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull devm usage cleanup from Wolfram Sang: "Lately, I have been experimenting how to improve the devm interface to make writing device drivers easier and less error prone while also getting rid of its subtle issues. I think it has more potential but still needs work and definately conistency, especiall in its usage. The first thing I come up with is a low hanging fruit regarding devm_ioremap_resouce(). This function already checks if the passed resource is valid and gives an error message if not. So, we can remove similar checks from the drivers and get rid of a bit of code and a number of inconsistent error strings. This series only removes the unneeded check iff devm_ioremap_resource follows platform_get_resource directly. The previous version tried to shuffle code if needed, too, what lead to an embarrasing bug. It turned out to me that shuffling code for all cases found will make the automated script too complex, so I am unsure if an automated cleanup is the proper tool for this case. Removing the easy stuff seems worthwhile to me, though. Despite various architectures and platform dependencies, I managed to compile test 45 out of 57 modified files locally using heuristics and defconfigs." Pulled because: 296 deletions, 0 additions. * 'devm_no_resource_check' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (33 commits) sound/soc/kirkwood: don't check resource with devm_ioremap_resource sound/soc/fsl: don't check resource with devm_ioremap_resource arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource arch/arm/plat-samsung: don't check resource with devm_ioremap_resource arch/arm/mach-tegra: don't check resource with devm_ioremap_resource drivers/watchdog: don't check resource with devm_ioremap_resource drivers/w1/masters: don't check resource with devm_ioremap_resource drivers/video/omap2/dss: don't check resource with devm_ioremap_resource drivers/video/omap2: don't check resource with devm_ioremap_resource drivers/usb/phy: don't check resource with devm_ioremap_resource drivers/usb/host: don't check resource with devm_ioremap_resource drivers/usb/gadget: don't check resource with devm_ioremap_resource drivers/usb/chipidea: don't check resource with devm_ioremap_resource drivers/thermal: don't check resource with devm_ioremap_resource drivers/staging/nvec: don't check resource with devm_ioremap_resource drivers/staging/dwc2: don't check resource with devm_ioremap_resource drivers/spi: don't check resource with devm_ioremap_resource drivers/rtc: don't check resource with devm_ioremap_resource drivers/pwm: don't check resource with devm_ioremap_resource drivers/pinctrl: don't check resource with devm_ioremap_resource ...
2013-05-18drivers/net/ethernet/renesas: don't check resource with devm_ioremap_resourceWolfram Sang
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-05-17gianfar: add missing iounmap() on error in gianfar_ptp_probe()Wei Yongjun
Add the missing iounmap() before return from gianfar_ptp_probe() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-17ath9k: fix draining aggregation tid buffersFelix Fietkau
After a tx attempt, an A-MPDU subframe can still have fi->retries at 0 (if the retry count wasn't incremented due to powersave). In that case it is still tracked as part of the block ack window, so when draining the tid queue, its sequence number needs to be cleared from the pending frame bitmap. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k: fix rate handling/reportingFelix Fietkau
This patch fixes some issues introduced in the rate control API rework. When not running aggregation, copy bf->rates into info->control.rates before applying the rate control status to it. In ath_lookup_rate, the rates need to be pulled from bf->rates, not the tx info. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k: fix aggregation stop/flush handlingFelix Fietkau
When aggregation stop is requested, don't run the mac80211 aggregation stop callback yet, while the session is still blocked. Also, when aggregation flush is requested, don't run the callback at all. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k_hw: Enable manual peak calibration for AR9485Sujith Manoharan
Manual peak calibration is currently enabled only for AR9462 and AR9565. This is also required for AR9485. The initvals are also modified to disable HW peak calibration. Cc: <stable@vger.kernel.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17rtlwifi: rtl8192cu: Add new USB IDAlbert Pool
This adds the USB ID of the On Networks N300MA, clone of Netgear WNA3100M. Signed-off-by: Albert Pool <albertpool@solcon.nl> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: Ana Rey <Anazul77@hotmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17brcmfmac: announce P2P_DEVICE support in wiphy structureArend van Spriel
P2P_DEVICE support was removed from brcmfmac for v3.9 kernel with the commit below: commit 1527c343c12f3a2aae532aa881d12c6fbf8749f4 Author: Arend van Spriel <arend@broadcom.com> Date: Thu Apr 4 12:10:11 2013 +0200 brcmfmac: remove advertising P2P device support However, it got merged into wireless-next. But for 3.10 brcmfmac does support P2P device. Putting it back with this commit. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17rtlwifi: rtl8188ee: Fix warning when building on big-endian systemsLarry Finger
In http://lkml.indiana.edu/hypermail/linux/kernel/1305.1/index.html, Geert Uytterhoeven reports a new warning when building 3.10-rc1 in this driver. This is caused by using a "#if" test to see if __LITTLE_ENDIAN is set, which fails for all big-endian systems. Change to "ifdef". Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17ath9k: Fix crash on module unloadSujith Manoharan
Make sure that any open relayfs files are closed before unregistering with mac80211, otherwise this crash is seen: [ 1331.097846] BUG: unable to handle kernel paging request at 6b6b6b8b [ 1331.098170] IP: [<c063d0d6>] debugfs_remove+0x26/0x80 [ 1331.098170] *pdpt = 000000002f9aa001 *pde = 0000000000000000 [ 1331.098170] Oops: 0000 [#1] PREEMPT SMP [ 1331.098170] Modules linked in: iptable_raw xt_CT nf_conntrack_ipv4 nf_defrag] [ 1331.098170] Pid: 4794, comm: rmmod Tainted: G WC 3.9.1+ #5 To Be Fi. [ 1331.098170] EIP: 0060:[<c063d0d6>] EFLAGS: 00010202 CPU: 0 [ 1331.098170] EIP is at debugfs_remove+0x26/0x80 [ 1331.098170] EAX: f2f3acd0 EBX: f2f3acd0 ECX: 00000006 EDX: f8622348 [ 1331.098170] ESI: 6b6b6b6b EDI: 00000001 EBP: ee251e14 ESP: ee251e0c [ 1331.098170] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 1331.098170] CR0: 8005003b CR2: 6b6b6b8b CR3: 2e7b7000 CR4: 000007e0 [ 1331.098170] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 1331.098170] DR6: ffff0ff0 DR7: 00000400 [ 1331.098170] Process rmmod (pid: 4794, ti=ee250000 task=efaa2560 task.ti=ee25) [ 1331.098170] Stack: [ 1331.098170] f241e170 0000000a ee251e1c f861394d ee251e28 c04e3088 f241e170 4 [ 1331.098170] c04e30fe f45482b0 ee251e54 c04e3187 f25e86b0 ee251e54 f8618748 0 [ 1331.098170] 0000000a 00000001 ee251e68 f860065b f2509e20 f25085a0 f5b6e8a4 8 [ 1331.098170] Call Trace: [ 1331.098170] [<f861394d>] remove_buf_file_handler+0xd/0x20 [ath9k] [ 1331.098170] [<c04e3088>] relay_remove_buf+0x18/0x30 [ 1331.098170] [<c04e30fe>] relay_close_buf+0x2e/0x40 [ 1331.098170] [<c04e3187>] relay_close+0x77/0xf0 [ 1331.098170] [<f8618748>] ? dpd_exit+0x38/0x40 [ath9k] [ 1331.098170] [<f860065b>] ath9k_deinit_softc+0x8b/0xa0 [ath9k] [ 1331.098170] [<f86006b8>] ath9k_deinit_device+0x48/0x60 [ath9k] [ 1331.098170] [<f86107f1>] ath_pci_remove+0x31/0x50 [ath9k] [ 1331.098170] [<c06dbff8>] pci_device_remove+0x38/0xc0 [ 1331.098170] [<c079daa4>] __device_release_driver+0x64/0xc0 [ 1331.098170] [<c079db97>] driver_detach+0x97/0xa0 [ 1331.098170] [<c079cacc>] bus_remove_driver+0x6c/0xe0 [ 1331.098170] [<c079c197>] ? bus_put+0x17/0x20 [ 1331.098170] [<c079cae3>] ? bus_remove_driver+0x83/0xe0 [ 1331.098170] [<c079e709>] driver_unregister+0x49/0x80 [ 1331.098170] [<c06dc138>] pci_unregister_driver+0x18/0x80 [ 1331.098170] [<f8610602>] ath_pci_exit+0x12/0x20 [ath9k] [ 1331.098170] [<f8619ce0>] ath9k_exit+0x17/0x337 [ath9k] [ 1331.098170] [<c09e537d>] ? mutex_unlock+0xd/0x10 [ 1331.098170] [<c04bd36c>] sys_delete_module+0x17c/0x250 [ 1331.098170] [<c0540dc4>] ? do_munmap+0x244/0x2d0 [ 1331.098170] [<c0540e96>] ? vm_munmap+0x46/0x60 [ 1331.098170] [<c09e8dc4>] ? restore_all+0xf/0xf [ 1331.098170] [<c09ebf50>] ? __do_page_fault+0x4c0/0x4c0 [ 1331.098170] [<c04b18e4>] ? trace_hardirqs_on_caller+0xf4/0x180 [ 1331.098170] [<c09ef28d>] sysenter_do_call+0x12/0x38 [ 1331.098170] Code: 90 8d 74 26 00 55 89 e5 83 ec 08 89 1c 24 89 74 24 04 3e 82 [ 1331.098170] EIP: [<c063d0d6>] debugfs_remove+0x26/0x80 SS:ESP 0068:ee251e0c [ 1331.098170] CR2: 000000006b6b6b8b [ 1331.727971] ---[ end trace b5bb9f2066cef7f9 ]--- Cc: <stable@vger.kernel.org> Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17net/wireless: ATH9K should depend on HAS_DMAGeert Uytterhoeven
If NO_DMA=y: drivers/built-in.o: In function `ath9k_beacon_generate': drivers/net/wireless/ath/ath9k/beacon.c:146: undefined reference to `dma_unmap_single' drivers/net/wireless/ath/ath9k/beacon.c:174: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/beacon.c:176: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath9k_beacon_remove_slot': drivers/net/wireless/ath/ath9k/beacon.c:252: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_descdma_setup': drivers/net/wireless/ath/ath9k/init.c:382: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_edma_get_buffers': drivers/net/wireless/ath/ath9k/recv.c:616: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_get_next_rx_buf': drivers/net/wireless/ath/ath9k/recv.c:740: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_edma_cleanup': drivers/net/wireless/ath/ath9k/recv.c:176: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_cleanup': drivers/net/wireless/ath/ath9k/recv.c:340: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_buf_link': drivers/net/wireless/ath/ath9k/recv.c:122: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_rx_tasklet': drivers/net/wireless/ath/ath9k/recv.c:1275: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:1277: undefined reference to `dma_mapping_error' drivers/net/wireless/ath/ath9k/recv.c:1283: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_rx_edma_init': drivers/net/wireless/ath/ath9k/recv.c:226: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:229: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_rx_init': drivers/net/wireless/ath/ath9k/recv.c:303: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/recv.c:306: undefined reference to `dma_mapping_error' drivers/built-in.o: In function `ath_tx_complete_buf': drivers/net/wireless/ath/ath9k/xmit.c:2088: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `ath_txstatus_setup': drivers/net/wireless/ath/ath9k/xmit.c:2344: undefined reference to `dmam_alloc_coherent' drivers/built-in.o: In function `ath_tx_set_retry': drivers/net/wireless/ath/ath9k/xmit.c:307: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `ath_tx_setup_buffer': drivers/net/wireless/ath/ath9k/xmit.c:1887: undefined reference to `dma_map_single' drivers/net/wireless/ath/ath9k/xmit.c:1889: undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17iwlegacy: remove inline marking of EXPORT_SYMBOL functionsDenis Efremov
EXPORT_SYMBOL and inline directives are contradictory to each other. The patch fixes this inconsistency. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Denis Efremov <yefremov.denis@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-17Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2013-05-16Merge tag 'ntb-bugfixes-3.10' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB update from Jon Mason: "NTB bug fixes to address Smatch/Coverity errors, link toggling bugs, and a few corner cases in the driver." This pull request came in during the merge window, but without any signage etc. So I'm taking it late, because it wasn't _originally_ late. * tag 'ntb-bugfixes-3.10' of git://github.com/jonmason/ntb: NTB: Multiple NTB client fix ntb_netdev: remove from list on exit NTB: memcpy lockup workaround NTB: Correctly handle receive buffers of the minimal size NTB: reset tx_index on link toggle NTB: Link toggle memory leak NTB: Handle 64bit BAR sizes NTB: fix pointer math issues ntb: off by one sanity checks NTB: variable dereferenced before check
2013-05-16bonding: allow TSO being set on bonding masterEric Dumazet
In some situations, we need to disable TSO on bonding slaves. bonding device automatically unset TSO in bond_fix_features(), and performance is not good because : 1) We consume more cpu cycles. 2) GSO segmentation has some bugs leading to out of order TCP packets if this segmentation is done before virtual device. This particular problem will be addressed in a separate patch. This patch allows TSO being set/unset on the bonding master, so that GSO segmentation is done after bonding layer. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Michał Mirosław <mirqus@gmail.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Maciej Żenczykowski <maze@google.com> Cc: Tom Herbert <therbert@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-16NET: mv643xx_eth: avoid lockdep dump on interface downRussell King
When the interface is shutdown, the mv643xx_eth driver hits the following lockdep dump: ================================= [ INFO: inconsistent lock state ] 3.8.0+ #303 Not tainted --------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. NetworkManager/3449 [HC0[0]:SC0[0]:HE1:SE1] takes: (_xmit_ETHER#2){+.?...}, at: [<c02828e4>] txq_reclaim+0x60/0x230 {IN-SOFTIRQ-W} state was registered at: [<c007e93c>] mark_irqflags+0xf8/0x1c4 [<c007ee60>] __lock_acquire+0x458/0x9a4 [<c007f8b0>] lock_acquire+0x60/0x74 [<c03ea914>] _raw_spin_lock+0x40/0x50 [<c0334040>] sch_direct_xmit+0xa4/0x2e4 [<c0320880>] dev_queue_xmit+0x174/0x508 [<c03953b0>] ip6_finish_output2+0xd0/0x3c4 [<c03b15bc>] mld_sendpack+0x190/0x368 [<c03b3204>] mld_ifc_timer_expire+0xc/0x58 [<c005133c>] call_timer_fn+0x6c/0xe0 [<c0051588>] run_timer_softirq+0x1d8/0x210 [<c004c004>] __do_softirq+0xe0/0x1b4 [<c004c448>] irq_exit+0x64/0x6c [<c000f1e0>] handle_IRQ+0x34/0x84 [<c000e0d0>] __irq_usr+0x30/0x80 irq event stamp: 160603 hardirqs last enabled at (160603): [<c00c736c>] kfree+0xa8/0xe8 hardirqs last disabled at (160602): [<c00c72e0>] kfree+0x1c/0xe8 softirqs last enabled at (160304): [<c028260c>] mib_counters_update+0x5ec/0x60c softirqs last disabled at (160302): [<c03eab8c>] _raw_spin_lock_bh+0x14/0x54 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(_xmit_ETHER#2); <Interrupt> lock(_xmit_ETHER#2); *** DEADLOCK *** 1 lock held by NetworkManager/3449: #0: (rtnl_mutex){+.+.+.}, at: [<c032e664>] rtnetlink_rcv+0xc/0x24 stack backtrace: [<c0013e34>] (unwind_backtrace+0x0/0xf8) from [<c007e12c>] (print_usage_bug+0x150/0x1d4) [<c007e12c>] (print_usage_bug+0x150/0x1d4) from [<c007e3f8>] (mark_lock_irq+0x248/0x290) [<c007e3f8>] (mark_lock_irq+0x248/0x290) from [<c007e598>] (mark_lock+0x158/0x404) [<c007e598>] (mark_lock+0x158/0x404) from [<c007e97c>] (mark_irqflags+0x138/0x1c4) [<c007e97c>] (mark_irqflags+0x138/0x1c4) from [<c007ee60>] (__lock_acquire+0x458/0x9a4) [<c007ee60>] (__lock_acquire+0x458/0x9a4) from [<c007f8b0>] (lock_acquire+0x60/0x74) [<c007f8b0>] (lock_acquire+0x60/0x74) from [<c03ea914>] (_raw_spin_lock+0x40/0x50) [<c03ea914>] (_raw_spin_lock+0x40/0x50) from [<c02828e4>] (txq_reclaim+0x60/0x230) [<c02828e4>] (txq_reclaim+0x60/0x230) from [<c0282ad8>] (txq_deinit+0x24/0xcc) [<c0282ad8>] (txq_deinit+0x24/0xcc) from [<c0282d28>] (mv643xx_eth_stop+0x1a8/0x1bc) [<c0282d28>] (mv643xx_eth_stop+0x1a8/0x1bc) from [<c031e314>] (__dev_close_many+0x88/0xcc) [<c031e314>] (__dev_close_many+0x88/0xcc) from [<c031e380>] (__dev_close+0x28/0x3c) [<c031e380>] (__dev_close+0x28/0x3c) from [<c0320fa0>] (__dev_change_flags+0x7c/0x134) [<c0320fa0>] (__dev_change_flags+0x7c/0x134) from [<c03210e0>] (dev_change_flags+0x10/0x48) [<c03210e0>] (dev_change_flags+0x10/0x48) from [<c032da1c>] (do_setlink+0x1a0/0x730) [<c032da1c>] (do_setlink+0x1a0/0x730) from [<c032f524>] (rtnl_newlink+0x304/0x4b0) [<c032f524>] (rtnl_newlink+0x304/0x4b0) from [<c032ef8c>] (rtnetlink_rcv_msg+0x25c/0x2a0) [<c032ef8c>] (rtnetlink_rcv_msg+0x25c/0x2a0) from [<c03383a0>] (netlink_rcv_skb+0xbc/0xd8) [<c03383a0>] (netlink_rcv_skb+0xbc/0xd8) from [<c032e674>] (rtnetlink_rcv+0x1c/0x24) [<c032e674>] (rtnetlink_rcv+0x1c/0x24) from [<c03361d8>] (netlink_unicast_kernel+0x88/0xd4) [<c03361d8>] (netlink_unicast_kernel+0x88/0xd4) from [<c0337dd0>] (netlink_unicast+0x138/0x180) [<c0337dd0>] (netlink_unicast+0x138/0x180) from [<c0338020>] (netlink_sendmsg+0x208/0x32c) [<c0338020>] (netlink_sendmsg+0x208/0x32c) from [<c030ab48>] (sock_sendmsg+0x84/0xa4) [<c030ab48>] (sock_sendmsg+0x84/0xa4) from [<c030aef4>] (__sys_sendmsg+0x2ac/0x2c4) [<c030aef4>] (__sys_sendmsg+0x2ac/0x2c4) from [<c030c8ec>] (sys_sendmsg+0x3c/0x68) [<c030c8ec>] (sys_sendmsg+0x3c/0x68) from [<c000e2e0>] (ret_fast_syscall+0x0/0x3c) It seems that txq_reclaim() takes the netif tx lock: __netif_tx_lock(nq, smp_processor_id()); in a context outside of softirq context, and thus is susceptible to deadlock should an interrupt occur. Use __netif_tx_lock_bh()/__netif_tx_unlock_bh() instead. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-16iwlwifi: mvm: fix aggregation drain flowEmmanuel Grumbach
Move the counter for non-AMPDU frames to mvm. It is needed for the drain flow which happens once the ieee80211_sta has been freed, so keeping it in iwl_mvm_sta which is embed into ieee80211_sta is not a good idea. Also, since its purpose it to remove the STA in the fw only after all the frames for this station have exited the shared Tx queues, we need to decrement it in the reclaim flow. This flow can happen after ieee80211_sta has been removed, which means that we have no iwl_mvm_sta there. So we can't know what is the vif type. Hence, we know audit these frames for all the vif types. In order to avoid spawning sta_drained_wk all the time, we now check that we are in a flow in which draining might happen - only when mvmsta is NULL. This is better than previous code that would spawn sta_drained_wk all the time in AP mode. Cc: stable@vger.kernel.org [3.9] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16iwlwifi: mvm: Prevent setting assoc flag in MAC_CONTEXT_CMDAlexander Bondar
In the normal flow first MAC_CONTEXT_CMD for particular interface is never sent while associated. The exception is fw restart flow when resuming from suspend when WoWLAN is enabled. In this case successive "add" and "modify" MAC_CONTEXT_CMD commands may be sent with assoc flag set what cause FW mal functioning. To prevent this never set assoc flag in MAC_CONTEXT_CMD with action "add". Cc: stable@vger.kernel.org Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16iwlwifi: mvm: tell firmware to let multicast frames inEmmanuel Grumbach
Without this command, the firmware will filter out all the multicast frames. Let them all in as for now. Later we will want to optimize this to save power. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16iwlwifi: mvm: Always use SCAN_TYPE_FORCEDIlan Peer
The FW AUX framework does not handle well cases where time events fail to be scheduled (and as a result issues assert 0x3330). Until a proper fix is in place, WA this by always setting the scan type to SCAN_TYPE_FORCED. Cc: stable@vger.kernel.org Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-16mac80211_hwsim: correctly register the platform driverSasha Levin
Not registering a platform_driver would make us access garbage when the platform callbacks under driver_register() kicks in. Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Tested-By: Martin Pitt <martin.pitt@ubuntu.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-15fec: Invert the order of function calls in fec_restart()Fabio Estevam
commit 54309fa6 ("net: fec: fix kernel oops when plug/unplug cable many times") introduced the following 'if' block in the beginning of fec_start(): if (netif_running(ndev)) { netif_device_detach(ndev); napi_disable(&fep->napi); netif_stop_queue(ndev); netif_tx_lock_bh(ndev); } Then later in the end of fec_restart() there is another block that calls the opposite of each one of these functions. The correct approach would be to also call them with in the reverse order, so that we have as result: if (netif_running(ndev)) { netif_tx_unlock_bh(ndev); netif_wake_queue(ndev); napi_enable(&fep->napi); netif_device_attach(ndev); } Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-15fec: Fix inconsistent lock stateFabio Estevam
fec_restart() runs in softirq context and we should use the netif_tx_lock_bh/netif_tx_unlock_bh() variants to avoid the following warning that happens since commit 54309fa6 ("net: fec: fix kernel oops when plug/unplug cable many times"): [ 9.753168] ================================= [ 9.757540] [ INFO: inconsistent lock state ] [ 9.761921] 3.10.0-rc1-next-20130514 #13 Not tainted [ 9.766897] --------------------------------- [ 9.771264] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 9.777288] swapper/0 [HC0[0]:SC1[3]:HE1:SE0] takes: [ 9.782261] (_xmit_ETHER#2){+.?...}, at: [<c03c24a4>] sch_direct_xmit+0xa0/0x2d4 [ 9.789879] {SOFTIRQ-ON-W} state was registered at: [ 9.794769] [<c0059c60>] __lock_acquire+0x528/0x1bc0 [ 9.799953] [<c005b838>] lock_acquire+0xa0/0x108 [ 9.804780] [<c0441320>] _raw_spin_lock+0x28/0x38 [ 9.809702] [<c02f9fc8>] fec_restart+0x5d0/0x664 [ 9.814542] [<c02fa738>] fec_enet_adjust_link+0xa8/0xc0 [ 9.819978] [<c02f7a28>] phy_state_machine+0x2fc/0x370 [ 9.825323] [<c0035ee0>] process_one_work+0x1c0/0x4a0 [ 9.830589] [<c0036594>] worker_thread+0x138/0x394 [ 9.835587] [<c003c620>] kthread+0xa4/0xb0 [ 9.839890] [<c000e820>] ret_from_fork+0x14/0x34 [ 9.844728] irq event stamp: 185984 [ 9.848226] hardirqs last enabled at (185984): [<c00232b0>] local_bh_enable_ip+0x84/0xf0 [ 9.856450] hardirqs last disabled at (185983): [<c0023270>] local_bh_enable_ip+0x44/0xf0 [ 9.864667] softirqs last enabled at (185966): [<c0023470>] irq_enter+0x64/0x68 [ 9.872099] softirqs last disabled at (185967): [<c0023510>] irq_exit+0x9c/0xd8 [ 9.879440] [ 9.879440] other info that might help us debug this: [ 9.885981] Possible unsafe locking scenario: [ 9.885981] [ 9.891912] CPU0 [ 9.894364] ---- [ 9.896814] lock(_xmit_ETHER#2); [ 9.900259] <Interrupt> [ 9.902884] lock(_xmit_ETHER#2); [ 9.906500] [ 9.906500] *** DEADLOCK *** Reported-by: Shawn Guo <shawn.guo@linaro.org> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>