summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2020-09-24mt76: mt7615: unlock dfs bandsLorenzo Bianconi
Unlock dfs channels for mt7615 devices since the driver supports radar detection. Dfs pattern detector has been tested successfully by mt7615 users. Do not unlock DFS frequencies for mt7663 devices since it has not been tested yet. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663: check isr read return value in mt7663s_rx_workLorenzo Bianconi
In order to avoid using stale isr values, check return value from sdio_readsb() in mt7663s_rx_work() Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663s: introduce sdio tx aggregationLorenzo Bianconi
Introduce sdio tx aggregation to reduce bus transaction ands improve tx throughput. For the moment the skb are copied in a dedicated buffer since mmc APIs do not support sg table for zero-copy. Since skb data are already copied in xmit_buff[], avoid linearization in ma80211 layer. Relying on tx aggregation, we improve tx tpt of ~65%. Tested-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663s: fix possible quota leak in mt7663s_refill_sched_quotaLorenzo Bianconi
Look just at reported quota since the hw sporadically reports mcu tx quota without setting WHIER_TX_DONE_INT_EN bit Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: move pad estimation out of mt76_skb_adjust_padLorenzo Bianconi
Move frame pad computation out of mt76_skb_adjust_pad routine. This is a preliminary patch to introduce sdio tx aggregation. Tested-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663s: introduce __mt7663s_xmit_queue routineLorenzo Bianconi
This is a preliminary patch to introduce sdio tx aggregation Tested-by: Sean Wang <sean.wang@mediatek.com> Co-developed-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663s: split mt7663s_tx_update_sched in mt7663s_tx_{pick,update}_quotaLorenzo Bianconi
In order to not update the available quota in case of a tx error, split mt7663s_tx_update_sched in mt7663s_tx_{pick,update}_quota routines Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663s: do not use altx for ctl/mgmt trafficLorenzo Bianconi
Since the sdio engine does not report quota for altx queue, move ctl/mgmt traffic to standard data queues Tested-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7622: fix fw hang on mt7622Lorenzo Bianconi
Set poll timeout to 3s for mt7622 devices in order to avoid fw hangs. Swap mt7622_trigger_hif_int and doorbell configuration order in mt7615_mcu_drv_pmctrl routine. Introduce mt7615_mcu_lp_drv_pmctrl routine to take care of drv_own configuration for runtime-pm. Fixes: 08523a2a1db5 ("mt76: mt7615: add mt7615_pm_wake utility routine") Fixes: 894b7767ec2f ("mt76: mt7615: improve mt7615_driver_own reliability") Fixes: 757b0e7fd6f4 ("mt76: mt7615: avoid polling in fw_own for mt7663") Co-developed-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Co-developed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: fix VHT LDPC capabilityRyder Lee
The MCU field should contain a boolean 0/1, not the flag itself. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: Remove set but unused variable 'index'Wang Hai
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/mediatek/mt76/mt7615/testmode.c: In function mt7615_tm_set_tx_power drivers/net/wireless/mediatek/mt76/mt7615/testmode.c:83:7: warning: variable ‘index’ set but not used [-Wunused-but-set-variable]= commit 4f0bce1c8888 ("mt76: mt7615: implement testmode support") involved this unused variable, remove it. Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: remove retry_q from struct mt76_txq and related codeFelix Fietkau
Since the switch to using AQL by default, mtxq->retry_q is never filled anymore Remove it to get rid of a few more unnecessary cycles in the tx path Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: move txwi handling code to dma.c, since it is mmio specificFelix Fietkau
This way we can make some functions static Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: fix queue/tid mapping for airtime reportingFelix Fietkau
Unlike 7615, 7915 uses the same AC index for rx and tx, which matches the LMAC queue mapping Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: simplify mt7915_lmac_mappingFelix Fietkau
Compared to mac80211 ACs, MT7915 queue numbers are in reverse order There is no need for the defensive WARN_ON_ONCE, so we can simplify the function to avoid the array lookup Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: dma: cache dma map address/len in struct mt76_queue_entryFelix Fietkau
Accessing them from uncached memory can be expensive, so it's cheaper to cache them Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: fix HE BSS infoFelix Fietkau
he_pe_duration and he_rts_thres have the same unit as the fields in the HE operation IE Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: convert from tx tasklet to tx worker threadFelix Fietkau
This improves performance by allowing the scheduler to move the tx scheduling work to idle CPUs. Since tx scheduling work is very latency sensitive and kept short via AQL, sched_set_fifo_low is used to keep worker priority above normal tasks Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: add utility functions for deferring work to a kernel threadFelix Fietkau
In order to avoid keeping work like tx scheduling pinned to the CPU it was scheduled from, it makes sense to switch from tasklets to kernel threads. Unlike a workqueue, this one only allows one fixed worker function to be executed by the worker thread. Because of that, there is less locking and less code for scheduling involved. This is important because the tx worker is scheduled often in a hot path Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: testmode: add a limit for queued tx_frames packetsFelix Fietkau
This avoids running out of available tx tokens Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: fix antenna selection for testmode tx_framesFelix Fietkau
Do not alter the tx/rx chain settings during channel setup, antennas are remapped by the testmode specific register writes already Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: fix MT_ANT_SWITCH_CON register definitionFelix Fietkau
This is used for testmode tx antenna selection Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: fix unexpected firmware modeChih-Min Chen
Avoid firmware falling into spectrum mode since that will set unexpected PSE/PLE thresholds which lead to Tx hang. This mode should be cleaned before firmware download stage. Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt76x02: tune tx ring sizeFelix Fietkau
Increase data queue size to improve performance. Reduce PS/mgmt queue size Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7603: tune tx ring sizeFelix Fietkau
Stop relying on global tx ring size, reduce size for PS/mgmt queue Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: remove struct mt76_sw_queueFelix Fietkau
All members except for the struct mt76_queue pointer have been removed Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: rely on AQL for burst size limits on tx queueingFelix Fietkau
Now that AQL works well on all mt76 drivers, completely replace the arbitrary burst sizing and number of bursts logic for tx scheduling. For the short period of time in which AQL does not work well yet, limit each stations to 16 in-flight packets that have no estimated tx time. This should avoid filling the queue if a station connects and queues up a large number of packets before rate control information is available, especially with hardware rate control Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: remove swq from struct mt76_sw_queueFelix Fietkau
Since txq selection was moved to mac80211, it is no longer used Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: remove qid argument to drv->tx_complete_skbFelix Fietkau
It is not needed Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: unify queue tx cleanup codeFelix Fietkau
Cleanup and preparation for changing tx scheduling behavior Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: sdio: fix use of q->head and q->tailFelix Fietkau
Their use is reversed compared to DMA. The order for DMA makes more sense, so let's use that Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: usb: fix use of q->head and q->tailFelix Fietkau
Their use is reversed compared to DMA. The order for DMA makes more sense, so let's use that Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7603: check for single-stream EEPROM configurationFelix Fietkau
Some devices using MT7628 or MT7603 have only one antenna chain connected. Detect these using the EEPROM rx/tx path settings Reported-by: Qin Wei <me@vonger.cn> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: add memory barrier to DMA queue kickFelix Fietkau
Ensure that descriptor memory has been fully written before letting the hardware read it Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: add support for accessing mapped registers via bus opsFelix Fietkau
Makes it possible to read/write them via debugfs, similar to mt7615/7603 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: significantly reduce interrupt loadFelix Fietkau
On 7615 and newer, DMA completion only triggers unmap, but not free of queued skbs, since pointers to packets are queued internally. Because of that, there is no need to process the main data queue immediately on DMA completion. To improve performance, mask out the DMA data queue completion interrupt and process the queue only when we receive a txfree event. This brings the number of interrupts under load down to a small fraction. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: significantly reduce interrupt loadFelix Fietkau
On 7615 and newer, DMA completion only triggers unmap, but not free of queued skbs, since pointers to packets are queued internally. Because of that, there is no need to process the main data queue immediately on DMA completion. To improve performance, mask out the DMA data queue completion interrupt and process the queue only when we receive a txfree event. This brings the number of interrupts under load down to a small fraction. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: schedule tx tasklet in mt7915_mac_tx_freeFelix Fietkau
The previous scheduling round may have been limited by AQL. More frames might be available after the tx free run. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: dma: update q->queued immediately on cleanupFelix Fietkau
Tx cleanup and tx enqueuing can run in parallel. In order to avoid queue starvation issues under load, update q->queued immediately. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: optimize mt7915_mac_sta_pollFelix Fietkau
Since DMA completion does not imply tx completion, it makes more sense to poll for airtime from mt7915_mac_tx_free. Reduce the runtime of the function by moving all items from dev->sta_poll_list to a local list once and process any stations that were added afterwards on the next run Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: fix reading airtime statisticsFelix Fietkau
- change the WTBL LMAC access function to set the mapping window only once - use ac * 2 as offset, since each AC has separate words for rx and tx Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663u: fix dma header initializationLorenzo Bianconi
Fix length field corruption in usb dma header introduced adding sdio support Fixes: 75b10f0cbd0b ("mt76: mt76u: add mt76_skb_adjust_pad utility routine") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: fix a possible NULL pointer dereference in mt76_testmode_dumpLorenzo Bianconi
Fix a possible NULL pointer dereference in mt76_testmode_dump() since nla_nest_start returns NULL in case of error Fixes: f0efa8621550e ("mt76: add API for testmode support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: fix a possible NULL pointer dereference in mt7615_pm_wake_workLorenzo Bianconi
Initialize wcid to global_wcid if msta is NULL in mt7615_pm_wake_work routine since wcid will be dereferenced running mt76_tx() Fixes: 2b8cdfb28d340 ("mt76: mt7615: wake device before pushing frames in mt7615_tx") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: fix possible memory leak in mt7615_tm_set_tx_powerLorenzo Bianconi
Fix a memory leak in mt7615_tm_set_tx_power routine if mt7615_eeprom_get_target_power_index fails. Moreover do not account req_header twice in mcu skb allocation. Fixes: 4f0bce1c88882 ("mt76: mt7615: implement testmode support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663s: fix unable to handle kernel paging requestSean Wang
Use buffer allocated with kmalloc instead of with stack to fix kernel crash due to Unable to handle kernel paging request at virtual address ffffffc0095cbce8. [ 156.977349] Unable to handle kernel paging request at virtual address ffffffc0095cbce8 [ 156.985270] Mem abort info: [ 156.988059] ESR = 0x96000045 [ 156.991104] Exception class = DABT (current EL), IL = 32 bits [ 156.997013] SET = 0, FnV = 0 [ 157.000057] EA = 0, S1PTW = 0 [ 157.003190] Data abort info: [ 157.006061] ISV = 0, ISS = 0x00000045 [ 157.009887] CM = 0, WnR = 1 [ 157.012850] swapper pgtable: 4k pages, 39-bit VAs, pgdp = 0000000042adcba2 [ 157.019715] [ffffffc0095cbce8] pgd=0000000000000000, pud=0000000000000000 [ 157.026499] Internal error: Oops: 96000045 [#1] PREEMPT SMP [ 157.032065] Modules linked in: mt7663s mt7663_usb_sdio_common mt7615_common ... [ 157.073007] Process CompositorTileW (pid: 1625, stack limit = 0x000000003f2389fc) [ 157.080484] CPU: 0 PID: 1625 Comm: CompositorTileW Not tainted 4.19.137 #36 [ 157.092219] pstate: 80000085 (Nzcv daIf -PAN -UAO) [ 157.097012] pc : __memcpy+0xc0/0x180 [ 157.100585] lr : swiotlb_tbl_unmap_single+0x84/0x14c [ 157.105540] sp : ffffff8008003cb0 [ 157.108845] x29: ffffff8008003cb0 x28: ffffff9c1a211f60 [ 157.114149] x27: ffffff9c19ecc018 x26: 0000000000001000 [ 157.119452] x25: ffffff9c1a378000 x24: 0000000000000001 [ 157.124755] x23: ffffff9c1a378000 x22: 00000000000001ff [ 157.130058] x21: 0000000000000000 x20: 00000000fbefe800 [ 157.135360] x19: 0000000000000070 x18: 0000000000000000 [ 157.140663] x17: 0000000000000000 x16: 0000000000000000 [ 157.145965] x15: 0000000000000000 x14: 0000000000000000 [ 157.151267] x13: 0000000000000000 x12: 000000000000000d [ 157.156569] x11: 000000000000000c x10: 0000000a7befe800 [ 157.161873] x9 : fffffff680000000 x8 : 0000000000000000 [ 157.167175] x7 : 0000000100000003 x6 : ffffffc0095cbce8 [ 157.172479] x5 : 0000000000000000 x4 : 0000000000000000 [ 157.177781] x3 : 0000000000000002 x2 : fffffffffffffff0 [ 157.183085] x1 : ffffffca7befe810 x0 : ffffffc0095cbce8 [ 157.188389] Call trace: [ 157.190832] __memcpy+0xc0/0x180 [ 157.194053] swiotlb_unmap_sg_attrs+0xa8/0xb0 [ 157.198406] __swiotlb_unmap_sg_attrs+0x8c/0xa4 [ 157.202931] msdc_unprepare_data+0x6c/0x84 [ 157.207019] msdc_request_done+0x58/0x98 [ 157.210934] msdc_data_xfer_done+0x1a8/0x1d0 [ 157.215195] msdc_irq+0x12c/0x17c [ 157.218505] __handle_irq_event_percpu+0xd8/0x298 [ 157.223202] handle_irq_event+0x60/0xdc [ 157.227031] handle_fasteoi_irq+0xa4/0x1d4 [ 157.231120] __handle_domain_irq+0x84/0xc4 [ 157.235210] gic_handle_irq+0x124/0x1a4 [ 157.239038] el0_irq_naked+0x4c/0x54 [ 157.242608] Code: 14000028 f1020042 5400024a a8c12027 (a88120c7) [ 157.248693] ---[ end trace 28b8090135b0a2e1 ]--- [ 157.265589] Kernel panic - not syncing: Fatal exception in interrupt [ 157.271944] SMP: stopping secondary CPUs [ 157.275865] Kernel Offset: 0x1c10e00000 from 0xffffff8008000000 [ 157.281779] CPU features: 0x0,2188200c [ 157.285519] Memory Limit: none Fixes: a66cbdd6573d ("mt76: mt7615: introduce mt7663s support") Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663s: fix resume failureSean Wang
MT7663s have to rely on MMC_PM_KEEP_POWER in pm_flags for to avoid SDIO power is being shut off. To fix sdio access failure like "mt7663s mmc1:0001:1: sdio write failed: -22" for the first sdio command to access the bus in the resume handler. Fixes: a66cbdd6573d ("mt76: mt7615: introduce mt7663s support") Co-developed-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: YN Chen <YN.Chen@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7663s: use NULL instead of 0 in sdio codeLorenzo Bianconi
Fix the following sparse warnings in mt7663s driver: drivers/net/wireless/mediatek/mt76/mt7615/sdio_mcu.c:78:62: warning: Using plain integer as NULL pointer drivers/net/wireless/mediatek/mt76/mt7615/sdio_mcu.c:110:62: warning: Using plain integer as NULL pointer drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c:229:64: warning: Using plain integer as NULL pointer drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c:263:64: warning: Using plain integer as NULL pointer Fixes: a66cbdd6573d ("mt76: mt7615: introduce mt7663s support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7615: release mutex in mt7615_reset_test_setLorenzo Bianconi
Reduce scope of mutex_acquire/mutex_release in mt7615_reset_test_set routine in order to fix the following static checker warning: drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c:179 mt7615_reset_test_set() warn: inconsistent returns 'dev->mt76.mutex'. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: ea4906c4be49 ("mt76: mt7615: wake device before accessing regmap in debugfs") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: add Tx A-MSDU offloading supportRyder Lee
This disables the software A-MSDU aggregation in mac80211 and enables hardware offloading Suggested-by: Yiwei Chung <yiwei.chung@mediatek.com> Suggested-by: YF Luo <yf.luo@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 16:30:18 +0000