summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2021-01-26Merge tag 'wireless-drivers-2021-01-26' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.11 Second set of fixes for v5.11. Like in last time we again have more fixes than usual Actually a bit too much for my liking in this state of the cycle, but due to unrelated challenges I was only able to submit them now. We have few important crash fixes, iwlwifi modifying read-only data being the most reported issue, and also smaller fixes to iwlwifi. mt76 * fix a clang warning about enum usage * fix rx buffer refcounting crash mt7601u * fix rx buffer refcounting crash * fix crash when unbplugging the device iwlwifi * fix a crash where we were modifying read-only firmware data * lots of smaller fixes all over the driver * tag 'wireless-drivers-2021-01-26' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers: (24 commits) mt7601u: fix kernel crash unplugging the device iwlwifi: queue: bail out on invalid freeing iwlwifi: mvm: guard against device removal in reprobe iwlwifi: Fix IWL_SUBDEVICE_NO_160 macro to use the correct bit. iwlwifi: mvm: clear IN_D3 after wowlan status cmd iwlwifi: pcie: add rules to match Qu with Hr2 iwlwifi: mvm: invalidate IDs of internal stations at mvm start iwlwifi: mvm: fix the return type for DSM functions 1 and 2 iwlwifi: pcie: reschedule in long-running memory reads iwlwifi: pcie: use jiffies for memory read spin time limit iwlwifi: pcie: fix context info memory leak iwlwifi: pcie: add a NULL check in iwl_pcie_txq_unmap iwlwifi: pcie: set LTR on more devices iwlwifi: queue: don't crash if txq->entries is NULL iwlwifi: fix the NMI flow for old devices iwlwifi: pnvm: don't try to load after failures iwlwifi: pnvm: don't skip everything when not reloading iwlwifi: pcie: avoid potential PNVM leaks iwlwifi: mvm: take mutex for calling iwl_mvm_get_sync_time() iwlwifi: mvm: skip power command when unbinding vif during CSA ... ==================== Link: https://lore.kernel.org/r/20210126092202.6A367C433CA@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26iwlwifi: provide gso_type to GSO packetsEric Dumazet
net/core/tso.c got recent support for USO, and this broke iwlfifi because the driver implemented a limited form of GSO. Providing ->gso_type allows for skb_is_gso_tcp() to provide a correct result. Fixes: 3d5b459ba0e3 ("net: tso: add UDP segmentation support") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Ben Greear <greearb@candelatech.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Johannes Berg <johannes@sipsolutions.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209913 Link: https://lore.kernel.org/r/20210125150949.619309-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25mt7601u: fix kernel crash unplugging the deviceLorenzo Bianconi
The following crash log can occur unplugging the usb dongle since, after the urb poison in mt7601u_free_tx_queue(), usb_submit_urb() will always fail resulting in a skb kfree while the skb has been already queued. Fix the issue enqueuing the skb only if usb_submit_urb() succeed. Hardware name: Hewlett-Packard 500-539ng/2B2C, BIOS 80.06 04/01/2015 Workqueue: usb_hub_wq hub_event RIP: 0010:skb_trim+0x2c/0x30 RSP: 0000:ffffb4c88005bba8 EFLAGS: 00010206 RAX: 000000004ad483ee RBX: ffff9a236625dee0 RCX: 000000000000662f RDX: 000000000000000c RSI: 0000000000000000 RDI: ffff9a2343179300 RBP: ffff9a2343179300 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9a23748f7840 R11: 0000000000000001 R12: ffff9a236625e4d4 R13: ffff9a236625dee0 R14: 0000000000001080 R15: 0000000000000008 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd410a34ef8 CR3: 00000001416ee001 CR4: 00000000001706f0 Call Trace: mt7601u_tx_status+0x3e/0xa0 [mt7601u] mt7601u_dma_cleanup+0xca/0x110 [mt7601u] mt7601u_cleanup+0x22/0x30 [mt7601u] mt7601u_disconnect+0x22/0x60 [mt7601u] usb_unbind_interface+0x8a/0x270 ? kernfs_find_ns+0x35/0xd0 __device_release_driver+0x17a/0x230 device_release_driver+0x24/0x30 bus_remove_device+0xdb/0x140 device_del+0x18b/0x430 ? kobject_put+0x98/0x1d0 usb_disable_device+0xc6/0x1f0 usb_disconnect.cold+0x7e/0x20a hub_event+0xbf3/0x1870 process_one_work+0x1b6/0x350 worker_thread+0x53/0x3e0 ? process_one_work+0x350/0x350 kthread+0x11b/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 Fixes: 23377c200b2eb ("mt7601u: fix possible memory leak when the device is disconnected") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/3b85219f669a63a8ced1f43686de05915a580489.1610919247.git.lorenzo@kernel.org
2021-01-25iwlwifi: queue: bail out on invalid freeingJohannes Berg
If we find an entry without an SKB, we currently continue, but that will just result in an infinite loop since we won't increment the read pointer, and will try the same thing over and over again. Fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.abe2dedcc3ac.Ia6b03f9eeb617fd819e56dd5376f4bb8edc7b98a@changeid
2021-01-25iwlwifi: mvm: guard against device removal in reprobeJohannes Berg
If we get into a problem severe enough to attempt a reprobe, we schedule a worker to do that. However, if the problem gets more severe and the device is actually destroyed before this worker has a chance to run, we use a free device. Bump up the reference count of the device until the worker runs to avoid this situation. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.871f0892e4b2.I94819e11afd68d875f3e242b98bef724b8236f1e@changeid
2021-01-25iwlwifi: Fix IWL_SUBDEVICE_NO_160 macro to use the correct bit.Matti Gottlieb
The bit that indicates if the device supports 160MHZ is bit #9. The macro checks bit #8. Fix IWL_SUBDEVICE_NO_160 macro to use the correct bit. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Fixes: d6f2134a3831 ("iwlwifi: add mac/rf types and 160MHz to the device tables") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.bddbf9b57a75.I16e09e2b1404b16bfff70852a5a654aa468579e2@changeid
2021-01-25iwlwifi: mvm: clear IN_D3 after wowlan status cmdShaul Triebitz
In D3 resume flow, avoid the following race where sending packets before updating the sequence number (sequence number received from the wowlan status command response): Thread 1: __iwl_mvm_resume clears IWL_MVM_STATUS_IN_D3 and is cut by thread 2 before reaching iwl_mvm_query_wakeup_reasons. Thread 2: iwl_mvm_mac_itxq_xmit calls iwl_mvm_tx_skb since IWL_MVM_STATUS_IN_D3 is not set using a wrong sequence number. Thread 1: __iwl_mvm_resume continues and calls iwl_mvm_query_wakeup_reasons updating the sequence number received from the firmware. The next packet that will be sent now will cause sysassert 0x1096. Fix the bug by moving 'clear IWL_MVM_STATUS_IN_D3' to after sending the wowlan status command and updating the sequence number. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.fe927ec939c6.I103d3321fb55da7e6c6c51582cfadf94eb8b6c58@changeid
2021-01-25iwlwifi: pcie: add rules to match Qu with Hr2Luca Coelho
Until now we have been relying on matching the PCI ID and subsystem device ID in order to recognize Qu devices with Hr2. Add rules to match these devices, so that we don't have to add a new rule for every new ID we get. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.591ce253ddd8.Ia4b9cc2c535625890c6d6b560db97ee9f2d5ca3b@changeid
2021-01-25iwlwifi: mvm: invalidate IDs of internal stations at mvm startGregory Greenman
Having sta_id not set for aux_sta and snif_sta can potentially lead to a hard to debug issue in case remove station is called without an add. In this case sta_id 0, an unrelated regular station, will be removed. In fact, we do have a FW assert that occures rarely and from the debug data analysis it looks like sta_id 0 is removed by mistake, though it's hard to pinpoint the exact flow. The WARN_ON in this patch should help to find it. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.5dc6dd9b22d5.I2add1b5ad24d0d0a221de79d439c09f88fcaf15d@changeid
2021-01-25iwlwifi: mvm: fix the return type for DSM functions 1 and 2Matt Chen
The return type value of functions 1 and 2 were considered to be an integer inside a buffer, but they can also be only an integer, without the buffer. Fix the code in iwl_acpi_get_dsm_u8() to handle it as a single integer value, as well as packed inside a buffer. Signed-off-by: Matt Chen <matt.chen@intel.com> Fixes: 9db93491f29e ("iwlwifi: acpi: support device specific method (DSM)") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210122144849.5757092adcd6.Ic24524627b899c9a01af38107a62a626bdf5ae3a@changeid
2021-01-25iwlwifi: pcie: reschedule in long-running memory readsJohannes Berg
If we spin for a long time in memory reads that (for some reason in hardware) take a long time, then we'll eventually get messages such as watchdog: BUG: soft lockup - CPU#2 stuck for 24s! [kworker/2:2:272] This is because the reading really does take a very long time, and we don't schedule, so we're hogging the CPU with this task, at least if CONFIG_PREEMPT is not set, e.g. with CONFIG_PREEMPT_VOLUNTARY=y. Previously I misinterpreted the situation and thought that this was only going to happen if we had interrupts disabled, and then fixed this (which is good anyway, however), but that didn't always help; looking at it again now I realized that the spin unlock will only reschedule if CONFIG_PREEMPT is used. In order to avoid this issue, change the code to cond_resched() if we've been spinning for too long here. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 04516706bb99 ("iwlwifi: pcie: limit memory read spin time") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130253.217a9d6a6a12.If964cb582ab0aaa94e81c4ff3b279eaafda0fd3f@changeid
2021-01-25iwlwifi: pcie: use jiffies for memory read spin time limitJohannes Berg
There's no reason to use ktime_get() since we don't need any better precision than jiffies, and since we no longer disable interrupts around this code (when grabbing NIC access), jiffies will work fine. Use jiffies instead of ktime_get(). This cleanup is preparation for the following patch "iwlwifi: pcie: reschedule in long-running memory reads". The code gets simpler with the weird clock use etc. removed before we add cond_resched(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130253.621c948b1fad.I3ee9f4bc4e74a0c9125d42fb7c35cd80df4698a1@changeid
2021-01-25iwlwifi: pcie: fix context info memory leakJohannes Berg
If the image loader allocation fails, we leak all the previously allocated memory. Fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.97172cbaa67c.I3473233d0ad01a71aa9400832fb2b9f494d88a11@changeid
2021-01-25iwlwifi: pcie: add a NULL check in iwl_pcie_txq_unmapEmmanuel Grumbach
I hit a NULL pointer exception in this function when the init flow went really bad. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.2e8da9f2c132.I0234d4b8ddaf70aaa5028a20c863255e05bc1f84@changeid
2021-01-25iwlwifi: pcie: set LTR on more devicesJohannes Berg
To avoid completion timeouts during device boot, set up the LTR timeouts on more devices - similar to what we had before for AX210. This also corrects the AX210 workaround to be done only on discrete (non-integrated) devices, otherwise the registers have no effect. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: edb625208d84 ("iwlwifi: pcie: set LTR to avoid completion timeout") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.fb819e19530b.I0396f82922db66426f52fbb70d32a29c8fd66951@changeid
2021-01-25iwlwifi: queue: don't crash if txq->entries is NULLEmmanuel Grumbach
The code was really awkward, we would first dereference txq->entries when calling iwl_txq_genX_tfd_unmap and then we would check that txq->entries is non-NULL. Fix that by exiting if txq->entries is NULL. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.173359fc236d.I75c7c2397d20df8d7fbc24cb16a5232d5c551889@changeid
2021-01-25iwlwifi: fix the NMI flow for old devicesEmmanuel Grumbach
I noticed that the flow that triggers an NMI on the firmware for old devices (tested on 7265) doesn't work. Apparently, the firmware / device is still in low power when we write the register that triggers the NMI. We call the "grab_nic_access" function to make sure the device is awake but that wasn't enough. I played with this and noticed that if we wait 1 ms after the device reports it is awake before we write to the NMI register, the device always sees our write and the firmware gets properly asserted. Triggering an NMI to the firmware can be done with the debugfs hook: echo 1 > /sys/kernel/debug/iwlwifi/0000\:00\:03.0/iwlmvm/fw_nmi What happened before is that the firmware would just stall without running its NMI routine. Because of that the driver wouldn't get the "firmware crashed" interrupt. After a while the driver would notice that the firmware is not responding to some command and it would read the error data from the firmware, but this data is populated in the NMI service routine in the firmware which was not called. So in the logs it looked like: iwlwifi 0000:00:03.0: Error sending REPLY_ERROR: time out after 2000ms. iwlwifi 0000:00:03.0: Current CMD queue read_ptr 33 write_ptr 34 iwlwifi 0000:00:03.0: Loaded firmware version: 29.09bd31e1.0 7265D-29.ucode iwlwifi 0000:00:03.0: 0x00000000 | ADVANCED_SYSASSERT iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status0 iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status1 iwlwifi 0000:00:03.0: 0x00000000 | branchlink2 iwlwifi 0000:00:03.0: 0x00000000 | interruptlink1 iwlwifi 0000:00:03.0: 0x00000000 | interruptlink2 iwlwifi 0000:00:03.0: 0x00000000 | data1 iwlwifi 0000:00:03.0: 0x00000000 | data2 iwlwifi 0000:00:03.0: 0x00000000 | data3 iwlwifi 0000:00:03.0: 0x00000000 | beacon time iwlwifi 0000:00:03.0: 0x00000000 | tsf low ... With this fix, immediately after we trigger the NMI to the firmware, we get the expected: iwlwifi 0000:00:03.0: Microcode SW error detected. Restarting 0x2000000. iwlwifi 0000:00:03.0: Start IWL Error Log Dump: iwlwifi 0000:00:03.0: Status: 0x00000040, count: 6 iwlwifi 0000:00:03.0: Loaded firmware version: 29.09bd31e1.0 7265D-29.ucode iwlwifi 0000:00:03.0: 0x00000084 | NMI_INTERRUPT_UNKNOWN iwlwifi 0000:00:03.0: 0x000002F1 | trm_hw_status0 iwlwifi 0000:00:03.0: 0x00000000 | trm_hw_status1 iwlwifi 0000:00:03.0: 0x00043D6C | branchlink2 iwlwifi 0000:00:03.0: 0x0004AFD6 | interruptlink1 iwlwifi 0000:00:03.0: 0x000008C4 | interruptlink2 iwlwifi 0000:00:03.0: 0x00000000 | data1 iwlwifi 0000:00:03.0: 0x00000080 | data2 iwlwifi 0000:00:03.0: 0x07030000 | data3 iwlwifi 0000:00:03.0: 0x003FD4C3 | beacon time iwlwifi 0000:00:03.0: 0x00C22AC3 | tsf low iwlwifi 0000:00:03.0: 0x00000000 | tsf hi iwlwifi 0000:00:03.0: 0x00000000 | time gp1 iwlwifi 0000:00:03.0: 0x00C22AC3 | time gp2 iwlwifi 0000:00:03.0: 0x00000001 | uCode revision type iwlwifi 0000:00:03.0: 0x0000001D | uCode version major Notice the first line: "Microcode SW error detected:" which is printed in the driver's ISR, which means that the driver actually got an interrupt from the firmware saying that it crashed. And then we have the properly populated error data. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.70e67cc75d88.I6615cad4361862e7f3c9f2d3cafb6a8c61e16781@changeid
2021-01-25iwlwifi: pnvm: don't try to load after failuresJohannes Berg
If loading the PNVM file failed on the first try during the interface up, the file is unlikely to show up later, and we already don't try to reload it if it changes, so just don't try loading it again and again. This also fixes some issues where we may try to load it at resume time, which may not be possible yet. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.5ac6828a0bbe.I7d308358b21d3c0c84b1086999dbc7267f86e219@changeid
2021-01-25iwlwifi: pnvm: don't skip everything when not reloadingJohannes Berg
Even if we don't reload the file from disk, we still need to trigger the PNVM load flow with the device; fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.85ef56c4ef8c.I3b853ce041a0755d45e448035bef1837995d191b@changeid
2021-01-25iwlwifi: pcie: avoid potential PNVM leaksJohannes Berg
If we erroneously try to set the PNVM data again after it has already been set, we could leak the old DMA memory. Avoid that and warn, we shouldn't be doing this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 6972592850c0 ("iwlwifi: read and parse PNVM file") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.929c2d680429.I086b9490e6c005f3bcaa881b617e9f61908160f3@changeid
2021-01-25iwlwifi: mvm: take mutex for calling iwl_mvm_get_sync_time()Johannes Berg
We need to take the mutex to call iwl_mvm_get_sync_time(), do it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.4bb5ccf881a6.I62973cbb081e80aa5b0447a5c3b9c3251a65cf6b@changeid
2021-01-25iwlwifi: mvm: skip power command when unbinding vif during CSASara Sharon
In the new CSA flow, we remain associated during CSA, but still do a unbind-bind to the vif. However, sending the power command right after when vif is unbound but still associated causes FW to assert (0x3400) since it cannot tell the LMAC id. Just skip this command, we will send it again in a bit, when assigning the new context. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20210115130252.64a2254ac5c3.Iaa3a9050bf3d7c9cd5beaf561e932e6defc12ec3@changeid
2021-01-23chtls: Fix potential resource leakPan Bian
The dst entry should be released if no neighbour is found. Goto label free_dst to fix the issue. Besides, the check of ndev against NULL is redundant. Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121145738.51091-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-23net: dsa: bcm_sf2: put device node before returnPan Bian
Put the device node dn before return error code on failure path. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210121123343.26330-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22net: fec: put child node on error pathPan Bian
Also decrement the reference count of child device on error path. Fixes: 3e782985cb3c ("net: ethernet: fec: Allow configuration of MDIO bus speed") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210120122037.83897-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22net: stmmac: dwmac-intel-plat: remove config data on errorPan Bian
Remove the config data when rate setting fails. Fixes: 9efc9b2b04c7 ("net: stmmac: Add dwmac-intel-plat for GBE driver") Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210120110745.36412-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22net: octeontx2: Make sure the buffer is 128 byte alignedKevin Hao
The octeontx2 hardware needs the buffer to be 128 byte aligned. But in the current implementation of napi_alloc_frag(), it can't guarantee the return address is 128 byte aligned even the request size is a multiple of 128 bytes, so we have to request an extra 128 bytes and use the PTR_ALIGN() to make sure that the buffer is aligned correctly. Fixes: 7a36e4918e30 ("octeontx2-pf: Use the napi_alloc_frag() to alloc the pool buffers") Reported-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Kevin Hao <haokexin@gmail.com> Tested-by: Subbaraya Sundeep <sbhatta@marvell.com> Link: https://lore.kernel.org/r/20210121070906.25380-1-haokexin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-22net: usb: qmi_wwan: added support for Thales Cinterion PLSx3 modem familyGiacinto Cifelli
Bus 003 Device 009: ID 1e2d:006f Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1e2d idProduct 0x006f bcdDevice 0.00 iManufacturer 3 Cinterion Wireless Modules iProduct 2 PLSx3 iSerial 4 fa3c1419 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 303 bNumInterfaces 9 bConfigurationValue 1 iConfiguration 1 Cinterion Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 500mA Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 0 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC Union: bMasterInterface 0 bSlaveInterface 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 2 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 3 CDC Union: bMasterInterface 2 bSlaveInterface 3 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 4 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 5 CDC Union: bMasterInterface 4 bSlaveInterface 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Association: bLength 8 bDescriptorType 11 bFirstInterface 6 bInterfaceCount 2 bFunctionClass 2 Communications bFunctionSubClass 2 Abstract (modem) bFunctionProtocol 1 AT-commands (v.25ter) iFunction 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 CDC Header: bcdCDC 1.10 CDC ACM: bmCapabilities 0x02 line coding and serial state CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 7 CDC Union: bMasterInterface 6 bSlaveInterface 7 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 7 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 8 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x8a EP 10 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Cc: stable@vger.kernel.org Signed-off-by: Giacinto Cifelli <gciofono@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20210120045650.10855-1-gciofono@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: dsa: microchip: Adjust reset release timing to match reference reset ↵Marek Vasut
circuit KSZ8794CNX datasheet section 8.0 RESET CIRCUIT describes recommended circuit for interfacing with CPU/FPGA reset consisting of 10k pullup resistor and 10uF capacitor to ground. This circuit takes ~100 ms to rise enough to release the reset. For maximum supply voltage VDDIO=3.3V VIH=2.0V R=10kR C=10uF that is VDDIO - VIH t = R * C * -ln( ------------- ) = 10000*0.00001*-(-0.93)=0.093 s VDDIO so we need ~95 ms for the reset to really de-assert, and then the original 100us for the switch itself to come out of reset. Simply msleep() for 100 ms which fits the constraint with a bit of extra space. Fixes: 5b797980908a ("net: dsa: microchip: Implement recommended reset timing") Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Paul Barker <pbarker@konsulko.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210120030502.617185-1-marex@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: dsa: microchip: ksz8795: Fix KSZ8794 port map againMarek Vasut
The KSZ8795 switch has 4 external ports {0,1,2,3} and 1 CPU port {4}, so does the KSZ8765. The KSZ8794 seems to be repackaged KSZ8795 with different ID and port 3 not routed out, however the port 3 registers are present in the silicon, so the KSZ8794 switch has 3 external ports {0,1,2} and 1 CPU port {4}. Currently the driver always uses the last port as CPU port, on KSZ8795/KSZ8765 that is port 4 and that is OK, but on KSZ8794 that is port 3 and that is not OK, as it must also be port 4. This patch adjusts the driver such that it always registers a switch with 5 ports total (4 external ports, 1 CPU port), always sets the CPU port to switch port 4, and then configures the external port mask according to the switch model -- 3 ports for KSZ8794 and 4 for KSZ8795/KSZ8765. Fixes: 68a1b676db52 ("net: dsa: microchip: ksz8795: remove superfluous port_cnt assignment") Fixes: 4ce2a984abd8 ("net: dsa: microchip: ksz8795: use phy_port_cnt where possible") Fixes: 241ed719bc98 ("net: dsa: microchip: ksz8795: use port_cnt instead of TOTOAL_PORT_NUM") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210120001045.488506-1-marex@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20Merge tag 'linux-can-fixes-for-5.11-20210120' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== linux-can-fixes-for-5.11-20210120 All three patches are by Vincent Mailhol and fix a potential use after free bug in the CAN device infrastructure, the vxcan driver, and the peak_usk driver. In the TX-path the skb is used to read from after it was passed to the networking stack with netif_rx_ni(). * tag 'linux-can-fixes-for-5.11-20210120' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: peak_usb: fix use after free bugs can: vxcan: vxcan_xmit: fix use after free bug can: dev: can_restart: fix use after free bug ==================== Link: https://lore.kernel.org/r/20210120125202.2187358-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: systemport: free dev before on error pathPan Bian
On the error path, it should goto the error handling label to free allocated memory rather than directly return. Fixes: 31bc72d97656 ("net: systemport: fetch and use clock resources") Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210120044423.1704-1-bianpan2016@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: usb: cdc_ncm: don't spew notificationsGrant Grundler
RTL8156 sends notifications about every 32ms. Only display/log notifications when something changes. This issue has been reported by others: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472 https://lkml.org/lkml/2020/8/27/1083 ... [785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd [785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00 [785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN [785962.929954] usb 1-1: Manufacturer: Realtek [785962.929956] usb 1-1: SerialNumber: 000000001 [785962.991755] usbcore: registered new interface driver cdc_ether [785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15 [785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384 [785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384 [785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15 [785963.019211] usbcore: registered new interface driver cdc_ncm [785963.023856] usbcore: registered new interface driver cdc_wdm [785963.025461] usbcore: registered new interface driver cdc_mbim [785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0 [785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected ... This is about 2KB per second and will overwrite all contents of a 1MB dmesg buffer in under 10 minutes rendering them useless for debugging many kernel problems. This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering the majority of those logs useless too. When the link is up (expected state), spew amount is >2x higher: ... [786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink ... Chrome OS cannot support RTL8156 until this is fixed. Signed-off-by: Grant Grundler <grundler@chromium.org> Reviewed-by: Hayes Wang <hayeswang@realtek.com> Link: https://lore.kernel.org/r/20210120011208.3768105-1-grundler@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20net: mscc: ocelot: Fix multicast to the CPU portAlban Bedel
Multicast entries in the MAC table use the high bits of the MAC address to encode the ports that should get the packets. But this port mask does not work for the CPU port, to receive these packets on the CPU port the MAC_CPU_COPY flag must be set. Because of this IPv6 was effectively not working because neighbor solicitations were never received. This was not apparent before commit 9403c158 (net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb entries) as the IPv6 entries were broken so all incoming IPv6 multicast was then treated as unknown and flooded on all ports. To fix this problem rework the ocelot_mact_learn() to set the MAC_CPU_COPY flag when a multicast entry that target the CPU port is added. For this we have to read back the ports endcoded in the pseudo MAC address by the caller. It is not a very nice design but that avoid changing the callers and should make backporting easier. Signed-off-by: Alban Bedel <alban.bedel@aerq.com> Fixes: 9403c158b872 ("net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb entries") Link: https://lore.kernel.org/r/20210119140638.203374-1-alban.bedel@aerq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-20can: peak_usb: fix use after free bugsVincent Mailhol
After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the peak_usb_netif_rx_ni(). Reordering the lines solves the issue. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Link: https://lore.kernel.org/r/20210120114137.200019-4-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-20can: vxcan: vxcan_xmit: fix use after free bugVincent Mailhol
After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the canfd_frame cfd which aliases skb memory is accessed after the netif_rx_ni(). Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)") Link: https://lore.kernel.org/r/20210120114137.200019-3-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-20can: dev: can_restart: fix use after free bugVincent Mailhol
After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the netif_rx_ni() in: stats->rx_bytes += cf->len; Reordering the lines solves the issue. Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://lore.kernel.org/r/20210120114137.200019-2-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-19net: dsa: b53: fix an off by one in checking "vlan->vid"Dan Carpenter
The > comparison should be >= to prevent accessing one element beyond the end of the dev->vlans[] array in the caller function, b53_vlan_add(). The "dev->vlans" array is allocated in the b53_switch_init() function and it has "dev->num_vlans" elements. Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/YAbxI97Dl/pmBy5V@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19sh_eth: Fix power down vs. is_opened flag orderingGeert Uytterhoeven
sh_eth_close() does a synchronous power down of the device before marking it closed. Revert the order, to make sure the device is never marked opened while suspended. While at it, use pm_runtime_put() instead of pm_runtime_put_sync(), as there is no reason to do a synchronous power down. Fixes: 7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20210118150812.796791-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19sh_eth: Make PHY access aware of Runtime PM to fix reboot crashGeert Uytterhoeven
Wolfram reports that his R-Car H2-based Lager board can no longer be rebooted in v5.11-rc1, as it crashes with an imprecise external abort. The issue can be reproduced on other boards (e.g. Koelsch with R-Car M2-W) too, if CONFIG_IP_PNP is disabled, and the Ethernet interface is down at reboot time: Unhandled fault: imprecise external abort (0x1406) at 0x00000000 pgd = (ptrval) [00000000] *pgd=422b6835, *pte=00000000, *ppte=00000000 Internal error: : 1406 [#1] ARM Modules linked in: CPU: 0 PID: 1105 Comm: init Tainted: G W 5.10.0-rc1-00402-ge2f016cf7751 #1048 Hardware name: Generic R-Car Gen2 (Flattened Device Tree) PC is at sh_mdio_ctrl+0x44/0x60 LR is at sh_mmd_ctrl+0x20/0x24 ... Backtrace: [<c0451f30>] (sh_mdio_ctrl) from [<c0451fd4>] (sh_mmd_ctrl+0x20/0x24) r7:0000001f r6:00000020 r5:00000002 r4:c22a1dc4 [<c0451fb4>] (sh_mmd_ctrl) from [<c044fc18>] (mdiobb_cmd+0x38/0xa8) [<c044fbe0>] (mdiobb_cmd) from [<c044feb8>] (mdiobb_read+0x58/0xdc) r9:c229f844 r8:c0c329dc r7:c221e000 r6:00000001 r5:c22a1dc4 r4:00000001 [<c044fe60>] (mdiobb_read) from [<c044c854>] (__mdiobus_read+0x74/0xe0) r7:0000001f r6:00000001 r5:c221e000 r4:c221e000 [<c044c7e0>] (__mdiobus_read) from [<c044c9d8>] (mdiobus_read+0x40/0x54) r7:0000001f r6:00000001 r5:c221e000 r4:c221e458 [<c044c998>] (mdiobus_read) from [<c044d678>] (phy_read+0x1c/0x20) r7:ffffe000 r6:c221e470 r5:00000200 r4:c229f800 [<c044d65c>] (phy_read) from [<c044d94c>] (kszphy_config_intr+0x44/0x80) [<c044d908>] (kszphy_config_intr) from [<c044694c>] (phy_disable_interrupts+0x44/0x50) r5:c229f800 r4:c229f800 [<c0446908>] (phy_disable_interrupts) from [<c0449370>] (phy_shutdown+0x18/0x1c) r5:c229f800 r4:c229f804 [<c0449358>] (phy_shutdown) from [<c040066c>] (device_shutdown+0x168/0x1f8) [<c0400504>] (device_shutdown) from [<c013de44>] (kernel_restart_prepare+0x3c/0x48) r9:c22d2000 r8:c0100264 r7:c0b0d034 r6:00000000 r5:4321fedc r4:00000000 [<c013de08>] (kernel_restart_prepare) from [<c013dee0>] (kernel_restart+0x1c/0x60) [<c013dec4>] (kernel_restart) from [<c013e1d8>] (__do_sys_reboot+0x168/0x208) r5:4321fedc r4:01234567 [<c013e070>] (__do_sys_reboot) from [<c013e2e8>] (sys_reboot+0x18/0x1c) r7:00000058 r6:00000000 r5:00000000 r4:00000000 [<c013e2d0>] (sys_reboot) from [<c0100060>] (ret_fast_syscall+0x0/0x54) As of commit e2f016cf775129c0 ("net: phy: add a shutdown procedure"), system reboot calls phy_disable_interrupts() during shutdown. As this happens unconditionally, the PHY registers may be accessed while the device is suspended, causing undefined behavior, which may crash the system. Fix this by wrapping the PHY bitbang accessors in the sh_eth driver by wrappers that take care of Runtime PM, to resume the device when needed. Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-19mdio-bitbang: Export mdiobb_{read,write}()Geert Uytterhoeven
Export mdiobb_read() and mdiobb_write(), so Ethernet controller drivers can call them from their MDIO read/write wrappers. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18net: dsa: mv88e6xxx: also read STU state in mv88e6250_g1_vtu_getnextRasmus Villemoes
mv88e6xxx_port_vlan_join checks whether the VTU already contains an entry for the given vid (via mv88e6xxx_vtu_getnext), and if so, merely changes the relevant .member[] element and loads the updated entry into the VTU. However, at least for the mv88e6250, the on-stack struct mv88e6xxx_vtu_entry vlan never has its .state[] array explicitly initialized, neither in mv88e6xxx_port_vlan_join() nor inside the getnext implementation. So the new entry has random garbage for the STU bits, breaking VLAN filtering. When the VTU entry is initially created, those bits are all zero, and we should make sure to keep them that way when the entry is updated. Fixes: 92307069a96c (net: dsa: mv88e6xxx: Avoid VTU corruption on 6097) Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Tobias Waldekranz <tobias@waldekranz.com> Tested-by: Tobias Waldekranz <tobias@waldekranz.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18net: mscc: ocelot: allow offloading of bridge on top of LAGVladimir Oltean
The blamed commit was too aggressive, and it made ocelot_netdevice_event react only to network interface events emitted for the ocelot switch ports. In fact, only the PRECHANGEUPPER should have had that check. When we ignore all events that are not for us, we miss the fact that the upper of the LAG changes, and the bonding interface gets enslaved to a bridge. This is an operation we could offload under certain conditions. Fixes: 7afb3e575e5a ("net: mscc: ocelot: don't handle netdev events for other netdevs") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210118135210.2666246-1-olteanv@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-18mt76: mt7663s: fix rx buffer refcountingLorenzo Bianconi
Similar to mt7601u driver, fix erroneous rx page refcounting Fixes: a66cbdd6573d ("mt76: mt7615: introduce mt7663s support") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/dca19c9d445156201bc41f7cbb6e894bbc9a678c.1610644945.git.lorenzo@kernel.org
2021-01-18mt7601u: fix rx buffer refcountingLorenzo Bianconi
Fix the following crash due to erroneous page refcounting: [ 32.445919] BUG: Bad page state in process swapper/1 pfn:11f65a [ 32.447409] page:00000000938f0632 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 pfn:0x11f65a [ 32.449605] flags: 0x8000000000000000() [ 32.450421] raw: 8000000000000000 ffffffff825b0148 ffffea00045ae988 0000000000000000 [ 32.451795] raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000 [ 32.452999] page dumped because: nonzero mapcount [ 32.453888] Modules linked in: [ 32.454492] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-rc2+ #1976 [ 32.455695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-1.fc33 04/01/2014 [ 32.457157] Call Trace: [ 32.457636] <IRQ> [ 32.457993] dump_stack+0x77/0x97 [ 32.458576] bad_page.cold+0x65/0x96 [ 32.459198] get_page_from_freelist+0x46a/0x11f0 [ 32.460008] __alloc_pages_nodemask+0x10a/0x2b0 [ 32.460794] mt7601u_rx_tasklet+0x651/0x720 [ 32.461505] tasklet_action_common.constprop.0+0x6b/0xd0 [ 32.462343] __do_softirq+0x152/0x46c [ 32.462928] asm_call_irq_on_stack+0x12/0x20 [ 32.463610] </IRQ> [ 32.463953] do_softirq_own_stack+0x5b/0x70 [ 32.464582] irq_exit_rcu+0x9f/0xe0 [ 32.465028] common_interrupt+0xae/0x1a0 [ 32.465536] asm_common_interrupt+0x1e/0x40 [ 32.466071] RIP: 0010:default_idle+0x18/0x20 [ 32.468981] RSP: 0018:ffffc90000077f00 EFLAGS: 00000246 [ 32.469648] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 [ 32.470550] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff81aac3dd [ 32.471463] RBP: ffff88810022ab00 R08: 0000000000000001 R09: 0000000000000001 [ 32.472335] R10: 0000000000000046 R11: 0000000000005aa0 R12: 0000000000000000 [ 32.473235] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 32.474139] ? default_idle_call+0x4d/0x200 [ 32.474681] default_idle_call+0x74/0x200 [ 32.475192] do_idle+0x1d5/0x250 [ 32.475612] cpu_startup_entry+0x19/0x20 [ 32.476114] secondary_startup_64_no_verify+0xb0/0xbb [ 32.476765] Disabling lock debugging due to kernel taint Fixes: c869f77d6abb ("add mt7601u driver") Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/62b2380c8c2091834cfad05e1059b55f945bd114.1610643952.git.lorenzo@kernel.org
2021-01-15octeontx2-af: Fix missing check bugs in rvu_cgx.cYingjie Wang
In rvu_mbox_handler_cgx_mac_addr_get() and rvu_mbox_handler_cgx_mac_addr_set(), the msg is expected only from PFs that are mapped to CGX LMACs. It should be checked before mapping, so we add the is_cgx_config_permitted() in the functions. Fixes: 96be2e0da85e ("octeontx2-af: Support for MAC address filters in CGX") Signed-off-by: Yingjie Wang <wangyingjie55@126.com> Reviewed-by: Geetha sowjanya<gakula@marvell.com> Link: https://lore.kernel.org/r/1610719804-35230-1-git-send-email-wangyingjie55@126.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14nt: usb: USB_RTL8153_ECM should not default to yGeert Uytterhoeven
In general, device drivers should not be enabled by default. Fixes: 657bc1d10bfc23ac ("r8153_ecm: avoid to be prior to r8152 driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210113144309.1384615-1-geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14net: stmmac: fix taprio configuration when base_time is in the pastYannick Vignon
The Synopsys TSN MAC supports Qbv base times in the past, but only up to a certain limit. As a result, a taprio qdisc configuration with a small base time (for example when treating the base time as a simple phase offset) is not applied by the hardware and silently ignored. This was observed on an NXP i.MX8MPlus device, but likely affects all TSN-variants of the MAC. Fix the issue by making sure the base time is in the future, pushing it by an integer amount of cycle times if needed. (a similar check is already done in several other taprio implementations, see for example drivers/net/ethernet/intel/igc/igc_tsn.c#L116 or drivers/net/dsa/sja1105/sja1105_ptp.h#L39). Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API") Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Link: https://lore.kernel.org/r/20210113131557.24651-2-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14net: stmmac: fix taprio schedule configurationYannick Vignon
When configuring a 802.1Qbv schedule through the tc taprio qdisc on an NXP i.MX8MPlus device, the effective cycle time differed from the requested one by N*96ns, with N number of entries in the Qbv Gate Control List. This is because the driver was adding a 96ns margin to each interval of the GCL, apparently to account for the IPG. The problem was observed on NXP i.MX8MPlus devices but likely affected all devices relying on the same configuration callback (dwmac 4.00, 4.10, 5.10 variants). Fix the issue by removing the margins, and simply setup the MAC with the provided cycle time value. This is the behavior expected by the user-space API, as altering the Qbv schedule timings would break standards conformance. This is also the behavior of several other Ethernet MAC implementations supporting taprio, including the dwxgmac variant of stmmac. Fixes: 504723af0d85 ("net: stmmac: Add basic EST support for GMAC5+") Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Link: https://lore.kernel.org/r/20210113131557.24651-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-14iwlwifi: dbg: Don't touch the tlv dataTakashi Iwai
The commit ba8f6f4ae254 ("iwlwifi: dbg: add dumping special device memory") added a termination of name string just to be sure, and this seems causing a regression, a GPF triggered at firmware loading. Basically we shouldn't modify the firmware data that may be provided as read-only. This patch drops the code that caused the regression and keep the tlv data as is. Fixes: ba8f6f4ae254 ("iwlwifi: dbg: add dumping special device memory") BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1180344 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210733 Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210112132449.22243-2-tiwai@suse.de
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 19:59:22 +0000