summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2017-08-21qlogic: make device_attribute constBhumika Goyal
Make these const as they are only passed as an argument to the function device_create_file and device_remove_file and the corresponding arguments are of type const. Done using Coccinelle Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-20liquidio: fix use of pf in pass-through mode in a virtual machineRick Farrington
Fix problem when PF is used in pass-through mode in a VM (w/embedded f/w). If host error reading PF num from CN23XX_PCIE_SRIOV_FDL reg, try to retrieve PF num from SLI_PKT(0)_INPUT_CONTROL (initialized by f/w). Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-20net: dsa: mv88e6xxx: make irq_chip constBhumika Goyal
Make this const as it is only used in a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-20net: ibm: emac: Fix some error handling path in 'emac_probe()'Christophe Jaillet
If 'irq_of_parse_and_map()' or 'of_address_to_resource()' fail, 'err' is known to be 0 at this point. So return -ENODEV instead in the first case and use 'of_iomap()' instead of the equivalent 'of_address_to_resource()/ioremap()' combinaison in the 2nd case. Doing so, the 'rsrc_regs' field of the 'emac_instance struct' becomes redundant and is removed. While at it, turn a 'err != 0' test into an equivalent 'err' to be more consistent. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-20cxgb4/cxgbvf: Handle 32-bit fw port capabilitiesGanesh Goudar
Implement new 32-bit Firmware Port Capabilities in order to handle new speeds which couldn't be represented in the old 16-bit Firmware Port Capabilities values. Based on the original work of Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-20net/mlx5e: Use size_t to store byte offset in statistics descriptorsGal Pressman
The byte offset of counter descriptors should be stored in size_t variable instead of an integer. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: Use kernel types instead of uint*_t in ethtool callbacksGal Pressman
Fix checkpatch errors: CHECK:PREFER_KERNEL_TYPES: Prefer kernel type 'u32' over 'uint32_t' Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: Place constants on the right side of comparisonsOr Gerlitz
To fix these checkpatch complaints: WARNING: Comparisons should place the constant on the right side of the test Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: Avoid using multiple blank linesOr Gerlitz
To fix these checkpatch complaints: CHECK: Please don't use multiple blank lines Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: Properly indent within conditional statementsOr Gerlitz
To fix these checkpatch complaints: WARNING: suspect code indent for conditional statements (8, 24) + if (eth_proto & (MLX5E_PROT_MASK(MLX5E_10GBASE_SR) [...] + return PORT_FIBRE; Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5: Add a blank line after declarationsOr Gerlitz
To fix these checkpatch complaints: WARNING: Missing a blank line after declarations Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5: Avoid blank lines after/before open/close braceOr Gerlitz
To fix these checkpatch complaints: CHECK: Blank lines aren't necessary after an open brace '{' CHECK: Blank lines aren't necessary before a close brace '}' Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: Add outbound PCI buffer overflow counterEran Ben Elisha
Add outbound_pci_buffer_overflow to ethtool output for monitoring the number of packets that were dropped due to lack of PCIe buffers on receive path from NIC port toward the host(s). This counter is valid only in case that tx_overflow_buffer_pkt is supported in MCAM enhanced features. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: Add RX buffer fullness countersGal Pressman
rx_buffer_passed_thres_phy - The number of events where the port RX buffer has passed a fullness threshold. rx_buffer_full_phy - The number of events where the port RX buffer has reached 100% fullness. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: Add PCIe outbound stalls countersGal Pressman
outbound_pci_stalled_rd - The percentage of time within the last second that the NIC had outbound non-posted read requests but could not perform the operation due to insufficient non-posted credits. outbound_pci_stalled_wr - The percentage of time within the last second that the NIC had outbound posted writes requests but could not perform the operation due to insufficient posted credits. outbound_pci_stalled_rd_events - The number of events where outbound_pci_stalled_rd was above the threshold. outbound_pci_stalled_wr_events - The number of events where outbound_pci_stalled_wr was above the threshold. Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: IPoIB, Add support for get_link_ksettings in ethtoolShalom Lagziel
Add support for "ethtool DEVNAME" over ipoib ports, Display standard port information for IPoIB netdevices using ethtool For example: $ ethtool ib2 > Settings for ib2: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Speed: 100000Mb/s Duplex: Full Port: Other PHYAD: 0 Transceiver: internal Auto-negotiation: off Link detected: yes Signed-off-by: Shalom Lagziel <shaloml@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: IPoIB, Fix driver name retrieved by ethtoolFeras Daoud
Printing an enhanced IPoIB device information using "ethtool -i DEVNAME", prints the low level driver name: mlx5_core. This commit changes the name to mlx5_core [ib_ipoib], to include the ipoib device driver infromation. Fixes: 076b0936e5fb ("net/mlx5e: IPoIB, Add ethtool support") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-20net/mlx5e: Send PAOS command on interface up/downEran Ben Elisha
Upon interface up/down, driver will send PAOS (Ports Administrative and Operational Status Register) in order to inform the Firmware on the desired status of the port by the driver. Since now we might change physical link status on mlx5e_open/close, logical VF representor should not use mlx5e_open/close ndos as is, and should call the logical version mlx5e_open/closed_locked. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-08-19bnxt_en: fix spelling mistake: "swtichdev" -> "switchdev"Colin Ian King
Trivial fix to spelling mistake in a netdev_info message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19net: hns3: fix a handful of spelling mistakesColin Ian King
Trival fix to spelling mistakes: firware -> firmware invald -> invalid mutilcast -> multicast Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19net: defxx: constify eisa_device_idArvind Yadav
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19net: hp100: constify eisa_device_idArvind Yadav
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19net: de4x5: constify eisa_device_idArvind Yadav
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19net: 3c59x: constify eisa_device_idArvind Yadav
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19net: 3c509: constify eisa_device_idArvind Yadav
eisa_device_id are not supposed to change at runtime. All functions working with eisa_device_id provided by <linux/eisa.h> work with const eisa_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: don't reuse pointers in ring dumpingJakub Kicinski
We were reusing skb pointer when reading page frag, since ring entries contain a union of a skb and frag pointer. This can be confusing to people reading the code. Refactor the code to read frag pointer directly. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: fix copy paste in names and messages regarding vNICsJakub Kicinski
Data and control vNICs currently use the same area name and error message. This could lead to confusion. Make sure the error message says "ctrl" in case of control and the data area is called "nfp.bar0". Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: add ethtool statistics for representorsJakub Kicinski
Representors may be associated with both VFs or more importantly with physical ports. Allow vNIC and MAC statistics to be read with ethtool -S on representors. In case of vNICs we reuse the vNIC statistic helper, we just need to swap RX and TX to give statistics the "switch perspective." Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: add pointer to vNIC config memory to nfp_port structureJakub Kicinski
Simplify the statistics handling code by keeping pointer to vNIC's config memory in nfp_port. Note that this is referring to the representor side of vNICs, vNIC side has the pointer in nfp_net. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: report MAC statistics in ethtoolJakub Kicinski
Add reporting of MAC statistics in ethtool. MAC statistics are read out from the MAC IP and accumulated by application FW, therefore their presence depends on the application FW. Add missing defines and string names for the statistics and dump them in ethtool -S. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: store pointer to MAC statistics in nfp_portJakub Kicinski
Store pointer to device memory containing MAC statistics in nfp_port. This simplifies representor code and will be used to dump those statistics in ethtool as well. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: split software and hardware vNIC statisticsJakub Kicinski
In preparation for reporting vNIC HW stats on representors split handling of the SW and HW stats in ethtool -S. Representors don't have SW stats (since vNIC is assigned to the VM). Remove the questionable defines which assume nn variable exists in the scope. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: add helper for printing ethtool stringsJakub Kicinski
Add a helper for printing ethtool strings and advancing the pointer correctly. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: don't report standard netdev statistics in ethtoolJakub Kicinski
We have been recently called out as a bad example for reporting standard netdev statistics as part of ethtool. Fix that :) Removing standard statistics allows us to simplify the structure holding definitions since we no longer have to mux different types of statistics. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: allow retreiving management FW logs on representorsJakub Kicinski
Users should be able to dump the management FW logs on any of the driver's netdevs. Make the code only depend on the nfp_app and share it between vNICs and representors. Storing the dump flag is simply dropped for now, since we only support the argument being set to 0. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: provide ethtool_drvinfo on representorsJakub Kicinski
Extend representors' ethtool ops to show basic info like firmware version, driver version, and driver name. While at it don't set drvinfo.n_stats and drvinfo.regdump_len, core will invoke appropriate handlers to get those. A helper is added to turn a netdev into nfp_app for convenience. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: link basic ethtool ops to representorsJakub Kicinski
Start linking ethtool ops to representors. Begin by adding a separate ops structure and providing link state. Next patches will convert appropriate functions to only use nfp_port, which will make them reusable on representors. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18net: drop unused attribute argument from sysfs queue funcsstephen hemminger
The show and store functions don't need/use the attribute. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Add additional ethtool statisticsLendacky, Thomas
Add some additional statistics for tracking VXLAN packets and checksum errors. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Add support for VXLAN offload capabilitiesLendacky, Thomas
The hardware has the capability to perform checksum offload support (both Tx and Rx) and TSO support for VXLAN packets. Add the support required to enable this. The hardware can only support a single VXLAN port for offload. If more than one VXLAN port is added then the offload capabilities have to be disabled and can no longer be advertised. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Convert to using the new link mode settingsLendacky, Thomas
Convert from using the old u32 supported, advertising, etc. link settings to the new link mode settings that support bit positions / settings greater than 32 bits. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Add per queue Tx and Rx statisticsLendacky, Thomas
Add per queue Tx and Rx packet and byte counts. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Add hardware features debug outputLendacky, Thomas
Use the dynamic debug support to output information about the hardware features reported by the device. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Optimize DMA channel interrupt enablementLendacky, Thomas
Currently whenever the driver needs to enable or disable interrupts for a DMA channel it reads the interrupt enable register (IER), updates the value and then writes the new value back to the IER. Since the hardware does not change the IER, software can track this value and elimiate the need to read it each time. Add the IER value to the channel related data structure and use that as the base for enabling and disabling interrupts, thus removing the need for the MMIO read. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Add additional dynamic debug messagesLendacky, Thomas
Add some additional dynamic debug message to the driver. The new messages will provide additional information about the PCS window calculation. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Add support to handle device renamingLendacky, Thomas
Many of the names used by the driver are based upon the name of the device found during device probe. Move the formatting of the names into the device open function so that any renaming that occurs before the device is brought up will be accounted for. This also means moving the creation of some named workqueues into the device open path. Add support to register for net events so that if a device is renamed the corresponding debugfs directory can be renamed. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Update TSO packet statistics accuracyLendacky, Thomas
When transmitting a TSO packet, the driver only increments the TSO packet statistic by one rather than the number of total packets that were sent. Update the driver to record the total number of packets that resulted from TSO transmit. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Be sure driver shuts down cleanly on module removalLendacky, Thomas
Sometimes when the driver is being unloaded while the devices are still up the driver can issue errors. This is based on timing and the double invocation of some routines. The phy_exit() call needs to be run after the network device has been closed and unregistered from the system. Also, the phy_exit() does not need to invoke phy_stop() since that will be called as part of the device closing, so remove that call. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Set the MII control width for the MAC interfaceLendacky, Thomas
When running in SGMII mode at speeds below 1000Mbps, the auto-negotition control register must set the MII control width for the MAC interface to be 8-bits wide. By default the width is 4-bits. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18amd-xgbe: Set the MDIO mode for 10000Base-T configurationLendacky, Thomas
Currently the MDIO mode is set to none for the 10000Base-T, which is incorrect. The MDIO mode should for this configuration should be clause 45. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 19:31:38 +0000