summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2018-06-04mlxsw: spectrum_span: Suppress VLAN on BRIDGE_VLAN_INFO_UNTAGGEDPetr Machata
When offloading mirroring to gretap or ip6gretap netdevices, an 802.1q bridge is one of the soft devices permissible in the underlay when resolving the packet path. After the packet path is resolved to a particular bridge egress device, flags on packet VLAN determine whether the egressed packet should be tagged. The current logic however only ever sets the VLAN tag, never suppresses it. Thus if there's a VLAN netdevice above the bridge that determines the packet VLAN, that VLAN is never unset, and mirroring is configured with VLAN tagging. Fix by setting the packet VLAN on both branches: set to zero (for unset) when BRIDGE_VLAN_INFO_UNTAGGED, copy the resolved VLAN (e.g. from bridge PVID) otherwise. Fixes: 946a11e7408e ("mlxsw: spectrum_span: Allow bridge for gretap mirror") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04mlxsw: spectrum_switchdev: Postpone respin on object deletionPetr Machata
VLAN deletion notifications are emitted before the relevant change is projected to bridge configuration. Thus, like with VLAN addition, schedule SPAN respin for later. Fixes: c520bc698647 ("mlxsw: Respin SPAN on switchdev events") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04ixgbe: fix possible race in reset subtaskTony Nguyen
Similar to ixgbevf, the same possibility for race exists. Extend the RTNL lock in ixgbe_reset_subtask() to protect the state bits; this is to make sure that we get the most up-to-date values for the bits and avoid a possible race when going down. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04bpf, i40e: add meta data supportDaniel Borkmann
Add support for XDP meta data when using build skb variant of the i40e driver. Implementation is analogous to the existing ixgbe and ixgbevf support for meta data from 366a88fe2f40 ("bpf, ixgbe: add meta data support") and be8333322eff ("ixgbevf: Add support for meta data"). With the build skb variant we get 192 bytes of extra headroom which can be used for encaps or meta data. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Tested-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04ixgbe: introduce a helper to simplify codeYueHaibing
ixgbe_dbg_reg_ops_read and ixgbe_dbg_netdev_ops_read copy-pasting the same code except for ixgbe_dbg_netdev_ops_buf/ixgbe_dbg_reg_ops_buf, so introduce a helper ixgbe_dbg_common_ops_read to remove redundant code. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04ixgbevf: fix possible race in the reset subtaskEmil Tantilov
Extend the RTNL lock in ixgbevf_reset_subtask() to protect the state bits check in addition to the call to ixgbevf_reinit_locked(). This is to make sure that we get the most up-to-date values for the bits and avoid a possible race when going down. Suggested-by: Zhiping du <zhipingdu@tencent.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04ixgbevf: Fix coexistence of malicious driver detection with XDPAlexander Duyck
In the case of the VF driver it is supposed to provide a context descriptor that allows us to provide information about the header offsets inside of the frame. However in the case of XDP we don't really have any of that information since the data is minimally processed. As a result we were seeing malicious driver detection (MDD) events being triggered when the PF had that functionality enabled. To address this I have added a bit of new code that will "prime" the XDP ring by providing one context descriptor that assumes the minimal setup of an Ethernet frame which is an L2 header length of 14. With just that we can provide enough information to make the hardware happy so that we don't trigger MDD events. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04igb: Wait 10ms just once after TX queues resetSergey Nemov
Move 10ms sleep out of function resetting TX queue. Reset all the TX queues in one turn and wait for all of them just once. Use usleep_range() instead of mdelay() in order not to affect transmission on other interfaces. Signed-off-by: Sergey Nemov <sergey.nemov@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04Merge branch 'hch.procfs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull procfs updates from Al Viro: "Christoph's proc_create_... cleanups series" * 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits) xfs, proc: hide unused xfs procfs helpers isdn/gigaset: add back gigaset_procinfo assignment proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields tty: replace ->proc_fops with ->proc_show ide: replace ->proc_fops with ->proc_show ide: remove ide_driver_proc_write isdn: replace ->proc_fops with ->proc_show atm: switch to proc_create_seq_private atm: simplify procfs code bluetooth: switch to proc_create_seq_data netfilter/x_tables: switch to proc_create_seq_private netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data neigh: switch to proc_create_seq_data hostap: switch to proc_create_{seq,single}_data bonding: switch to proc_create_seq_data rtc/proc: switch to proc_create_single_data drbd: switch to proc_create_single resource: switch to proc_create_seq_data staging/rtl8192u: simplify procfs code jfs: simplify procfs code ...
2018-06-04igb: Clear TSICR interrupts together with ICRJoanna Yurdal
Issuing "ip link set up/down" can block TSICR interrupts, what results in missing PTP Tx timestamp and no PPS pulse generation. Problem happens when the link is set up with the TSICR interrupts pending. ICR is cleared before enabling interrupts, while TSICR is not. When all TSICR interrupts are pending at this moment, time_sync interrupt will never be generated. TSICR should be cleared as well. In order to reproduce the issue: 1. Setup linux with IEEE 1588 grandmaster and PPS output enabled 2. Continue setting link up/down with random intervals between commands 3. Wait until PPS is not generated ( only one pulse is generated and PPS dies), and ptp4l complains constantly about Tx timeout. Signed-off-by: Joanna Yurdal <jyu@trackman.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04e1000e: Ignore TSYNCRXCTL when getting I219 clock attributesBenjamin Poirier
There have been multiple reports of crashes that look like kernel: RIP: 0010:[<ffffffff8110303f>] timecounter_read+0xf/0x50 [...] kernel: Call Trace: kernel: [<ffffffffa0806b0f>] e1000e_phc_gettime+0x2f/0x60 [e1000e] kernel: [<ffffffffa0806c5d>] e1000e_systim_overflow_work+0x1d/0x80 [e1000e] kernel: [<ffffffff810992c5>] process_one_work+0x155/0x440 kernel: [<ffffffff81099e16>] worker_thread+0x116/0x4b0 kernel: [<ffffffff8109f422>] kthread+0xd2/0xf0 kernel: [<ffffffff8163184f>] ret_from_fork+0x3f/0x70 These can be traced back to the fact that e1000e_systim_reset() skips the timecounter_init() call if e1000e_get_base_timinca() returns -EINVAL, which leads to a null deref in timecounter_read(). Commit 83129b37ef35 ("e1000e: fix systim issues", v4.2-rc1) reworked e1000e_get_base_timinca() in such a way that it can return -EINVAL for e1000_pch_spt if the SYSCFI bit is not set in TSYNCRXCTL. Some experimentation has shown that on I219 (e1000_pch_spt, "MAC: 12") adapters, the E1000_TSYNCRXCTL_SYSCFI flag is unstable; TSYNCRXCTL reads sometimes don't have the SYSCFI bit set. Retrying the read shortly after finds the bit to be set. This was observed at boot (probe) but also link up and link down. Moreover, the phc (PTP Hardware Clock) seems to operate normally even after reads where SYSCFI=0. Therefore, remove this register read and unconditionally set the clock parameters. Reported-by: Achim Mildenberger <admin@fph.physik.uni-karlsruhe.de> Message-Id: <20180425065243.g5mqewg5irkwgwgv@f2> Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1075876 Fixes: 83129b37ef35 ("e1000e: fix systim issues") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04net: mvpp2: mvpp2_percpu_read_relaxed() can be statickbuild test robot
Fixes: db9d7d36eecc ("net: mvpp2: Split the PPv2 driver to a dedicated directory") Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04net: aquantia: make function aq_fw2x_get_mac_permanent staticColin Ian King
The function aq_fw2x_get_mac_permanent is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: warning: symbol 'aq_fw2x_get_mac_permanent' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04net: ethernet: mlx4: Remove unnecessary parenthesesVarsha Rao
This patch fixes the clang warning of extraneous parentheses, with the following coccinelle script. @@ identifier i; expression e; statement s; @@ if ( -(i == e) +i == e ) s Suggested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Varsha Rao <rvarsha016@gmail.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04net: stmmac: Add Flexible PPS supportJose Abreu
This adds support for Flexible PPS output (which is equivalent to per_out output of PTP subsystem). Tested using an oscilloscope and the following commands: 1) Start PTP4L: # ptp4l -A -4 -H -m -i eth0 & 2) Set Flexible PPS frequency: # echo <idx> <ts> <tns> <ps> <pns> > /sys/class/ptp/ptpX/period Where, ts/tns is start time and ps/pns is period time, and ptpX is ptp of eth0. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04qed: Fix use of incorrect shmem address.Sudarsana Reddy Kalluru
Incorrect shared memory address is used while deriving the values for tc and pri_type. Use shmem address corresponding to 'oem_cfg_func' where the management firmare saves tc/pri_type values. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04qed: Fix shared memory inconsistency between driver and the MFW.Sudarsana Reddy Kalluru
The structure shared between driver and management firmware (MFW) differ in sizes. The additional field defined by the MFW is not relevant to the current driver. Add a dummy field to the structure. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04net: virtio: simplify the virtnet_find_vqsTonghao Zhang
Use the common free functions while return successfully. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03virtio_net: implement flush flag for ndo_xdp_xmitJesper Dangaard Brouer
When passed the XDP_XMIT_FLUSH flag virtnet_xdp_xmit now performs the same virtqueue_kick as virtnet_xdp_flush. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-03tun: implement flush flag for ndo_xdp_xmitJesper Dangaard Brouer
When passed the XDP_XMIT_FLUSH flag tun_xdp_xmit now performs the same kind of socket wake up as in tun_xdp_flush(). The wake up code from tun_xdp_flush is generalized and shared with tun_xdp_xmit. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-03ixgbe: implement flush flag for ndo_xdp_xmitJesper Dangaard Brouer
When passed the XDP_XMIT_FLUSH flag ixgbe_xdp_xmit now performs the same kind of ring tail update as in ixgbe_xdp_flush. The update tail code in ixgbe_xdp_flush is generalized and shared with ixgbe_xdp_xmit. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-03i40e: implement flush flag for ndo_xdp_xmitJesper Dangaard Brouer
When passed the XDP_XMIT_FLUSH flag i40e_xdp_xmit now performs the same kind of ring tail update as in i40e_xdp_flush. The advantage is that all the necessary checks have been performed and xdp_ring can be updated, instead of having to perform the exact same steps/checks in i40e_xdp_flush Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-03xdp: add flags argument to ndo_xdp_xmit APIJesper Dangaard Brouer
This patch only change the API and reject any use of flags. This is an intermediate step that allows us to implement the flush flag operation later, for each individual driver in a separate patch. The plan is to implement flush operation via XDP_XMIT_FLUSH flag and then remove XDP_XMIT_FLAGS_NONE when done. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-06-03Merge tag 'wireless-drivers-next-for-davem-2018-05-31' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.18 Hopefully the last pull request to 4.18 before the merge window. Nothing major here, we have smaller new features and of course a lots of fixes. Major changes: ath10k * add memory dump support for QCA9888 and QCA99X0 * add support to configure channel dwell time * support new DFS host confirmation feature in the firmware ath * update various regulatory mappings wcn36xx * various fixes to improve reliability * add Factory Test Mode support brmfmac * add debugfs file for reading firmware capabilities mwifiex * support sysfs initiated device coredump ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03mlx4_core: restore optimal ICM memory allocationEric Dumazet
Commit 1383cb8103bb ("mlx4_core: allocate ICM memory in page size chunks") brought two regressions caught in our regression suite. The big one is an additional cost of 256 bytes of overhead per 4096 bytes, or 6.25 % which is unacceptable since ICM can be pretty large. This comes from having to allocate one struct mlx4_icm_chunk (256 bytes) per MLX4_TABLE_CHUNK, which the buggy commit shrank to 4KB (instead of prior 256KB) Note that mlx4_alloc_icm() is already able to try high order allocations and fallback to low-order allocations under high memory pressure. Most of these allocations happen right after boot time, when we get plenty of non fragmented memory, there is really no point being so pessimistic and break huge pages into order-0 ones just for fun. We only have to tweak gfp_mask a bit, to help falling back faster, without risking OOM killings. Second regression is an KASAN fault, that will need further investigations. Fixes: 1383cb8103bb ("mlx4_core: allocate ICM memory in page size chunks") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Cc: John Sperbeck <jsperbeck@google.com> Cc: Tarick Bedeir <tarick@google.com> Cc: Qing Huang <qing.huang@oracle.com> Cc: Daniel Jurgens <danielj@mellanox.com> Cc: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03net: axienet: remove stale comment of axienet_openYueHaibing
axienet_open no longer return -ENODEV when PHY cannot be connected to since commit d7cc3163e026 ("net: axienet: Support phy-less mode of operation") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03net: netcp: ethss: remove unnecessary pointer set to NULLYueHaibing
If statement has make sure the 'slave->phy' is NULL Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03net/mlx5: Make function mlx5_fpga_tls_send_teardown_cmd() staticWei Yongjun
Fixes the following sparse warning: drivers/net/ethernet/mellanox/mlx5/core/fpga/tls.c:199:6: warning: symbol 'mlx5_fpga_tls_send_teardown_cmd' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03hv_netvsc: fix error return code in netvsc_probe()Wei Yongjun
Fix to return a negative error code from the failover register fail error handling case instead of 0, as done elsewhere in this function. Fixes: 1ff78076d8dd ("netvsc: refactor notifier/event handling code to use the failover framework") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Filling in the padding slot in the bpf structure as a bug fix in 'ne' overlapped with actually using that padding area for something in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03net: phy: consider PHY_IGNORE_INTERRUPT in state machine PHY_NOLINK handlingHeiner Kallweit
We can bail out immediately also in case of PHY_IGNORE_INTERRUPT because phy_mac_interupt() informs us once the link is up. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01net/mlx5e: TX, Separate cachelines of xmit and completion statsTariq Toukan
Avoid false sharing of cachelines by separating the cachelines of TX stats that are dertied in xmit flow and in completion flow. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-01net/mlx5e: RX, Always prefer Linear SKB configurationTariq Toukan
Prefer the linear SKB configuration of Legacy RQ over the non-linear one of Striding RQ. This implies that ConnectX-4 LX now uses legacy RQ by default, as it does not support the linear configuration of Striding RQ. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-01net/mlx5e: RX, Enhance legacy Receive Queue memory schemeTariq Toukan
Enhance the memory scheme of the legacy RQ, such that only order-0 pages are used. Whenever possible, prefer using a linear SKB, and build it wrapping the WQE buffer. Otherwise (for example, jumbo frames on x86), use non-linear SKB, with as many frags as needed. In this case, multiple WQE scatter entries are used, up to a maximum of 4 frags and 10KB of MTU. This implied to remove support of HW LRO in legacy RQ, as it would require large number of page allocations and scatter entries per WQE on archs with PAGE_SIZE = 4KB, yielding bad performance. In earlier patches, we guaranteed that all completions are in-order, and that we use a cyclic WQ. This creates an oppurtunity for a performance optimization: The mapping between a "struct mlx5e_dma_info", and the WQEs (struct mlx5e_wqe_frag_info) pointing to it, is constant across different cycles of a WQ. This allows initializing the mapping in the time of RQ creation, and not handle it in datapath. A struct mlx5e_dma_info that is shared between different WQEs is allocated by the first WQE, and freed by the last one. This implies an important requirement: WQEs that share the same struct mlx5e_dma_info must be posted within the same NAPI. Otherwise, upon completion, struct mlx5e_wqe_frag_info would mistakenly point to the new struct mlx5e_dma_info, not the one that was posted (and the HW wrote to). This bulking requirement is actually good also for performance reasons, hence we extend the bulk beyong the minimal requirement above. With this memory scheme, the RQs memory footprint is reduce by a factor of 2 on x86, and by a factor of 32 on PowerPC. Same factors apply for the number of pages in a GRO session. Performance tests: ConnectX-4, single core, single RX ring, default MTU. x86: CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz Packet rate (early drop in TC): no degradation TCP streams: ~5% improvement PowerPC: CPU: POWER8 (raw), altivec supported Packet rate (early drop in TC): 20% gain TCP streams: 25% gain Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-01net/mlx5e: RX, Use cyclic WQ in legacy RQTariq Toukan
Now that LRO is not supported for Legacy RQ, there is no source of out-of-order completions in the WQ, and we can use a cyclic one. This has multiple advantages: - reduces the WQE size (smaller PCI transactions). - lower overhead in datapath (no handling of 'next' pointers). - no reserved WQE for the WQ head (was need in linked-list). - allows using a constant map between frag and dma_info struct, in downstream patch. Performance tests: ConnectX-4, single core, single RX ring. Major gain in packet rate of single ring XDP drop. Bottleneck is shifted form HW (at 16Mpps) to SW (at 20Mpps). Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-01net/mlx5e: RX, Split WQ objects for different RQ typesTariq Toukan
Replace the common RQ WQ object with two separate ones for the different RQ types. This is in preparation for switching to using a cyclic WQ type in Legacy RQ. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-01net/mlx5e: RX, Remove HW LRO support in legacy RQTariq Toukan
Current LRO implementation in Legacy RQ uses high-order pages. In downstream patches of this series we complete the transition to using only order-0 pages in RX datapath (which was already done in Striding RQ). Unlike the more advanced Striding RQ, Legacy RQ does not make reuse of any non-consumed buffers of non-full LRO sessions, and combining it with order-0 pages has many performance drawbacks. Hence, here we totally remove LRO support in Legacy RQ. This guarantees having no out-of-order completions, which allows using a cyclic work queue (instead of a linked-list) in a downstream patch. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-01net/mlx5e: RX, Dedicate a function for copying SKB headerTariq Toukan
Get the logic of copying the packet header into the SKB linear part into a generic function. Function does copy length alignment and dma buffer sync. It is currently called only within the MPWQE flow. In a downstream patch, it will be called within the legacy RQ flow as well. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-01net/mlx5e: RX, Generalise function of SKB frag additionTariq Toukan
Rename it and pass truesize as an extra argument, as it will be used also in Legacy RQ in a downstream patch. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-01net/mlx5e: RX, Generalise name of non-linear SKB head sizeTariq Toukan
Make name more generic by dropping MPWRQ from it, as it will be used also in Legacy RQ in a downstream patch. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-01net/mlx5e: TX, Obsolete maintaining local copies of skb->len/dataTariq Toukan
Instead of maintaining a local copy of skb->len/data and updating it upon every copy to the WQE inline part, just calculate it once when needed, using the ihs. This obsoletes the function mlx5e_tx_skb_pull_inline. Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-01net/mlx5: FPGA, Handle QP error eventIlan Tayari
Add handlers for this event to perform graceful teardown of the device. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Adi Nissim <adin@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-01net/mlx5e: Support configurable MTU for vport representorsAdi Nissim
The representor MTU was hard coded to 1500 bytes. Allow setting arbitrary MTU values up to the max supported by the FW. Signed-off-by: Adi Nissim <adin@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-01net/mlx5e: Increase aRFS flow tables sizeMaor Gottlieb
Increase the aRFS flow table size to 64k so it could contain up to 64k different streams. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-01net/mlx5e: Remove redundant active_channels indicationEran Ben Elisha
Now, when all channels stats are saved regardless of the channel's state {open, closed}, we can safely remove this indication and the stats spin lock which protects it. Fixes: 76c3810bade3 ("net/mlx5e: Avoid reset netdev stats on configuration changes") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-01net/mlx5e: Present SW stats when state is not openedEran Ben Elisha
The driver can present all SW stats even when the state not opened. Fixed get strings, count and stats to support it. In addition, fix tc2txq to hold a static mapping which doesn't depend on the amount of open channels, and cannot have the same value on two different cells while moving between configurations. Example: - OOB 16 channels - Change to 2 channels, 8 TCs - tc2txq[15][0] == tc2txq[1][7] == 15 This will cause multiple appearances of the same TX index in statistics output. Fixes: 76c3810bade3 ("net/mlx5e: Avoid reset netdev stats on configuration changes") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-01net/mlx5e: IPOIB, Add a missing skb_pullTariq Toukan
A call to mlx5e_tx_skb_pull_inline was mistakenly dropped in the cited patch. Get it back. Fixes: 043dc78ecf07 ("net/mlx5e: TX, Use actual WQE size for SQ edge fill") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-01net/mlx5e: IPOIB, Fix overflowing SQ WQE memsetTariq Toukan
IPoIB WQE size is larger than a single WQEBB. Must not fetch the WQE, and surely not memset it, until it is guaranteed that there are enough WQEBBs available before getting to SQ/frag edge. Fixes: 043dc78ecf07 ("net/mlx5e: TX, Use actual WQE size for SQ edge fill") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-06-01net: hns3: Optimize the VF's process of updating multicast MACXi Wang
In the update flow of the new PF driver, if a multicast address is in mta table, the VF deletion action will not take effect. This patch adds the VF adaptation according to the new flow of PF'driver. Signed-off-by: Xi Wang <wangxi11@huawei.com> Reviewed-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01net: hns3: Optimize the PF's process of updating multicast MACXi Wang
In the current process, the multicast MAC is added to both MAC_VLAN table and MTA table, this will reduce the utilization of the resource. This patch improves the process of adding multicast MAC address, the new process starts using the MTA table to add multicast MAC after the MAC_VLAN table is full, and the MTA is disable if it is no longer used. Signed-off-by: Xi Wang <wangxi11@huawei.com> Reviewed-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 13:25:53 +0000