summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2019-02-23e1000e: Fix -Wformat-truncation warningsFlorian Fainelli
Provide precision hints to snprintf() since we know the destination buffer size of the RX/TX ring names are IFNAMSIZ + 5 - 1. This fixes the following warnings: drivers/net/ethernet/intel/e1000e/netdev.c: In function 'e1000_request_msix': drivers/net/ethernet/intel/e1000e/netdev.c:2109:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-rx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2107:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->rx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->rx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-rx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/e1000e/netdev.c:2125:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-tx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2123:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->tx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->tx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-tx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: dsa: mv88e6xxx: Fix -Wformat-security warningsFlorian Fainelli
We are not specifying an explicit format argument but instead passing a string litteral which causes these two warnings to show up: drivers/net/dsa/mv88e6xxx/chip.c: In function 'mv88e6xxx_irq_poll_setup': drivers/net/dsa/mv88e6xxx/chip.c:483:2: warning: format not a string literal and no format arguments [-Wformat-security] chip->kworker = kthread_create_worker(0, dev_name(chip->dev)); ^~~~ drivers/net/dsa/mv88e6xxx/ptp.c: In function 'mv88e6xxx_ptp_setup': drivers/net/dsa/mv88e6xxx/ptp.c:403:4: warning: format not a string literal and no format arguments [-Wformat-security] dev_name(chip->dev)); ^~~~~~~~ LD [M] drivers/net/dsa/mv88e6xxx/mv88e6xxx.o Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Avoid -Wformat-truncation warningsFlorian Fainelli
Give precision identifiers to the two snprintf() formatting the priority and TC strings to avoid producing these two warnings: drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function 'mlxsw_sp_port_get_prio_strings': drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:37: warning: '%d' directive output may be truncated writing between 1 and 3 bytes into a region of size between 0 and 31 [-Wformat-truncation=] snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2132:3: note: 'snprintf' output between 3 and 36 bytes into a destination of size 32 snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mlxsw_sp_port_hw_prio_stats[i].str, prio); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c: In function 'mlxsw_sp_port_get_tc_strings': drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:37: warning: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 31 [-Wformat-truncation=] snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~ drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2143:3: note: 'snprintf' output between 3 and 44 bytes into a destination of size 32 snprintf(*p, ETH_GSTRING_LEN, "%s_%d", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ mlxsw_sp_port_hw_tc_stats[i].str, tc); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10GMaxime Chevallier
Some Marvell Alaska PHYs support 2.5G, 5G and 10G BaseT links. Their default behaviour is to advertise all of these modes, but at the moment, only 10GBaseT is supported. To prevent link partners from establishing link at that speed, clear these modes upon configuring aneg parameters. Fixes: 20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Reported-by: Russell King <linux@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2019-02-23 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a bug in BPF's LPM deletion logic to match correct prefix length, from Alban. 2) Fix AF_XDP teardown by not destroying umem prematurely as it is still needed till all outstanding skbs are freed, from Björn. 3) Fix unkillable BPF_PROG_TEST_RUN under preempt kernel by checking signal_pending() outside need_resched() condition which is never triggered there, from Stanislav. 4) Fix two nfp JIT bugs, one in code emission for K-based xor, and another one to explicitly clear upper bits in alu32, from Jiong. 5) Add bpf list address to maintainers file, from Daniel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22mdio_bus: Fix use-after-free on device_register failsYueHaibing
KASAN has found use-after-free in fixed_mdio_bus_init, commit 0c692d07842a ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") call put_device() while device_register() fails,give up the last reference to the device and allow mdiobus_release to be executed ,kfreeing the bus. However in most drives, mdiobus_free be called to free the bus while mdiobus_register fails. use-after-free occurs when access bus again, this patch revert it to let mdiobus_free free the bus. KASAN report details as below: BUG: KASAN: use-after-free in mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 Read of size 4 at addr ffff8881dc824d78 by task syz-executor.0/3524 CPU: 1 PID: 3524 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 print_address_description+0x65/0x270 mm/kasan/report.c:187 kasan_report+0x149/0x18d mm/kasan/report.c:317 mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482 fixed_mdio_bus_init+0x283/0x1000 [fixed_phy] ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 ? 0xffffffffc0e40000 do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6215c19c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003 RBP: 00007f6215c19c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6215c1a6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 Allocated by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496 kmalloc include/linux/slab.h:545 [inline] kzalloc include/linux/slab.h:740 [inline] mdiobus_alloc_size+0x54/0x1b0 drivers/net/phy/mdio_bus.c:143 fixed_mdio_bus_init+0x163/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3524: set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:458 slab_free_hook mm/slub.c:1409 [inline] slab_free_freelist_hook mm/slub.c:1436 [inline] slab_free mm/slub.c:2986 [inline] kfree+0xe1/0x270 mm/slub.c:3938 device_release+0x78/0x200 drivers/base/core.c:919 kobject_cleanup lib/kobject.c:662 [inline] kobject_release lib/kobject.c:691 [inline] kref_put include/linux/kref.h:67 [inline] kobject_put+0x146/0x240 lib/kobject.c:708 put_device+0x1c/0x30 drivers/base/core.c:2060 __mdiobus_register+0x483/0x560 drivers/net/phy/mdio_bus.c:382 fixed_mdio_bus_init+0x26b/0x1000 [fixed_phy] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8881dc824c80 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 248 bytes inside of 2048-byte region [ffff8881dc824c80, ffff8881dc825480) The buggy address belongs to the page: page:ffffea0007720800 count:1 mapcount:0 mapping:ffff8881f6c02800 index:0x0 compound_mapcount: 0 flags: 0x2fffc0000010200(slab|head) raw: 02fffc0000010200 0000000000000000 0000000500000001 ffff8881f6c02800 raw: 0000000000000000 00000000800f000f 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881dc824c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8881dc824c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8881dc824d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8881dc824d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8881dc824e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 0c692d07842a ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: phy: at803x: disable delay only for RGMII modeVinod Koul
Per "Documentation/devicetree/bindings/net/ethernet.txt" RGMII mode should not have delay in PHY whereas RGMII_ID and RGMII_RXID/RGMII_TXID can have delay in PHY. So disable the delay only for RGMII mode and enable for other modes. Also treat the default case as disabled delays. Fixes: cd28d1d6e52e: ("net: phy: at803x: Disable phy delay for RGMII mode") Reported-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Peter Ujfalusi <peter.ujflausi@ti.com> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: phy: at803x: don't inline helpersVinod Koul
Some helpers were declared with the "inline" function specifier. It is preferable to let the compiler pick the right optimizations, so drop the specifier for at803x_disable_rx_delay() and at803x_disable_tx_delay() Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Tested-by: Peter Ujfalusi <peter.ujflausi@ti.com> Reviewed-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22bnxt_en: Wait longer for the firmware message response to complete.Michael Chan
The code waits up to 20 usec for the firmware response to complete once we've seen the valid response header in the buffer. It turns out that in some scenarios, this wait time is not long enough. Extend it to 150 usec and use usleep_range() instead of udelay(). Fixes: 9751e8e71487 ("bnxt_en: reduce timeout on initial HWRM calls") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22bnxt_en: Fix typo in firmware message timeout logic.Michael Chan
The logic that polls for the firmware message response uses a shorter sleep interval for the first few passes. But there was a typo so it was using the wrong counter (larger counter) for these short sleep passes. The result is a slightly shorter timeout period for these firmware messages than intended. Fix it by using the proper counter. Fixes: 9751e8e71487 ("bnxt_en: reduce timeout on initial HWRM calls") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23nfp: bpf: fix ALU32 high bits clearance bugJiong Wang
NFP BPF JIT compiler is doing a couple of small optimizations when jitting ALU imm instructions, some of these optimizations could save code-gen, for example: A & -1 = A A | 0 = A A ^ 0 = A However, for ALU32, high 32-bit of the 64-bit register should still be cleared according to ISA semantics. Fixes: cd7df56ed3e6 ("nfp: add BPF to NFP code translator") Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-23nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_KJiong Wang
The intended optimization should be A ^ 0 = A, not A ^ -1 = A. Fixes: cd7df56ed3e6 ("nfp: add BPF to NFP code translator") Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-22net/mlx5: Support ndo bridge_setlink and getlinkHuy Nguyen
Allow enabling VEPA mode on the HCA's port in legacy devlink mode. Example: bridge link set dev ens1f0 hwmode vepa will turn on VEPA mode on the netdev ens1f0. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-22net/mlx5: E-Switch, Add support for VEPA in legacy mode.Huy Nguyen
In Virtual Ethernet Port Aggregator (VEPA) mode, the packet skips the system internal virtual switch and forwards to external network switch. In Mellanox HCA case, the virtual switch is the HCA's Eswitch. To support this, an new FDB flow table are created with level 0 and linked to the existing FDB flow table in legacy mode. By default, VEPA is turned off and this FDB flow table is empty. When VEPA is turned on, two rules are created. One rule to forward on uplink vport traffic to the legacy FDB. The other rule forward all other traffic to uplink vport. Other design alternatives were not chosen as explained below: 1. Create a forward rule in ACL flow table (most efficient design). This approach is the not chosen because firmware does not support forward rule to uplink vport (0xffff) for ACL flow table. 2. Add additional source port criteria in all the FDB rules to make the FDB rules to be received rules only. This approach is not chosen because it is not efficient as there can many rules in the FDB and VEPA mode cannot be controlled per vport. 3. Add a highest prioirty flow group in the existing legacy FDB Flow Table instead of a new flow table. This approoach does not work because the new flow group has the same match criteria as the promiscuous flow group and mlx5_add_flow_rules does not allow specifying flow group. Signed-off-by: Huy Nguyen <huyn@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-22net/mlx5e: Fix mlx5e_tx_reporter_create return valueEran Ben Elisha
If reporter is ERR_PTR or NULL, error code shall be returned. At all other cases it shall return success. Fix that. Fixes: de8650a82071 ("net/mlx5e: Add tx reporter support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-22net/mlx5e: Fix return status of TX reporter timeout recoverEran Ben Elisha
In case of lost interrupt recover, we shall return success. Fix that. Fixes: 7d91126b1aea ("net/mlx5e: Add tx timeout support for mlx5e tx reporter") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reported-by: Maria Pasechnik <mariap@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-22net/mlx5e: Re-add support for TX timeout when TX reporter is not validEran Ben Elisha
When TX reporter was introduced, it took ownership over TX timeout error handling. this introduced a regression in case TX reporter is not valid (NET_DEVLINK is not set, or devlink_health_reporter_create failure). Fix mlx5e_tx_reporter_timeout function so it can be called at all times. In addition, remove a warning print that indicates that a TX timeout won't be handled in case of no valid TX reporter. Fixes: 7d91126b1aea ("net/mlx5e: Add tx timeout support for mlx5e tx reporter") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-22net/mlx5e: Fix warn print in case of TX reporter creation failureEran Ben Elisha
Print warning message in case of TX reporter creation failure, only if the return value is ERR_PTR type. NULL pointer return indicates that NET_DEVLINK is not set, and the warning print can be skipped. Fixes: de8650a82071 ("net/mlx5e: Add tx reporter support") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-22net/mlx5e: Fix GRE key by controlling port tunnel entropy calculationEli Britstein
Flow entropy is calculated on the inner packet headers and used for flow distribution in processing, routing etc. For GRE-type encapsulations the entropy value is placed in the eight LSB of the key field in the GRE header as defined in NVGRE RFC 7637. For UDP based encapsulations the entropy value is placed in the source port of the UDP header. The hardware may support entropy calculation specifically for GRE and for all tunneling protocols. With commit df2ef3bff193 ("net/mlx5e: Add GRE protocol offloading") GRE is offloaded, but the hardware is configured by default to calculate flow entropy so packets transmitted on the wire have a wrong key. To support UDP based tunnels (i.e VXLAN), GRE (i.e. no flow entropy) and NVGRE (i.e. with flow entropy) the hardware behaviour must be controlled by the driver. Ensure port entropy calculation is enabled for offloaded VXLAN tunnels and disable port entropy calculation in the presence of offloaded GRE tunnels by monitoring the presence of entropy enabling tunnels (i.e VXLAN) and entropy disabing tunnels (i.e GRE). Fixes: df2ef3bff193 ("net/mlx5e: Add GRE protocol offloading") Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-22net/mlx5: Use read-modify-write when changing PCMR register valuesEli Britstein
Currently changing a PCMR field is done by setting the field in a zeroed buffer, zeroing other unrelated fields. Fix this behaviour by modifying only the required field after first reading the current register values, as a pre-step towards using more fields in PCMR register. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Oz Shlomo <ozsh@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-02-22Merge tag 'wireless-drivers-next-for-davem-2019-02-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.1 Most likely the last set of patches for 5.1. WPA3 support to ath10k and qtnfmac. FTM support to iwlwifi and ath10k. And of course other new features and bugfixes. wireless-drivers was merged due to dependency in mt76. Major changes: iwlwifi * HE radiotap * FTM (Fine Timing Measurement) initiator and responder implementation * bump supported firmware API to 46 * VHT extended NSS support * new PCI IDs for 9260 and 22000 series ath10k * change QMI interface to support the new (and backwards incompatible) interface from HL3.1 and used in recent HL2.0 branch firmware releases * support WPA3 with WCN3990 * support for mac80211 airtime fairness based on transmit rate estimation, the firmware needs to support WMI_SERVICE_PEER_STATS to enable this * report transmit airtime to mac80211 with firmwares having WMI_SERVICE_REPORT_AIRTIME feature, this to have more accurate airtime fairness based on real transmit time (instead of just estimated from transmit rate) * support Fine Timing Measurement (FTM) responder role * add dynamic VLAN support with firmware having WMI_SERVICE_PER_PACKET_SW_ENCRYPT * switch to use SPDX license identifiers ath * add new country codes for US brcmfmac * support monitor frames with the hardware/ucode header qtnfmac * enable WPA3 SAE and OWE support mt76 * beacon support for USB devices (mesh+ad-hoc only) rtlwifi * convert to use SPDX license identifiers libertas_tf * get the MAC address before registering the device ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net/mlx5e: Trust kernel regarding transport offsetMaxim Mikityanskiy
After AF_PACKET is fixed to calculate the transport header offset correctly, trust the value set by the kernel. If the offset wasn't set, it means there is no transport header in the packet. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net/mlx5e: Remove the wrong assumption about transport offsetMaxim Mikityanskiy
skb_transport_offset() == 0 is not a special value. The only special value is when skb->transport_header is ~0U, and it's checked by skb_transport_header_was_set(). Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: Don't set transport offset to invalid valueMaxim Mikityanskiy
If the socket was created with socket(AF_PACKET, SOCK_RAW, 0), skb->protocol will be unset, __skb_flow_dissect() will fail, and skb_probe_transport_header() will fall back to the offset_hint, making the resulting skb_transport_offset incorrect. If, however, there is no transport header in the packet, transport_header shouldn't be set to an arbitrary value. Fix it by leaving the transport offset unset if it couldn't be found, to be explicit rather than to fill it with some wrong value. It changes the behavior, but if some code relied on the old behavior, it would be broken anyway, as the old one is incorrect. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22Merge tag 'mac80211-next-for-davem-2019-02-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have, of note: * the massive patch series for multi-BSSID support, I ended up applying that through a side branch to record some details * CSA improvements * HE (802.11ax) updates to Draft 3.3 * strongly typed element iteration/etc. to make such code more readable - this came up in particular in multi-BSSID * rhashtable conversion patches from Herbert Along, as usual, with various fixes and improvements. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22Merge tag 'mac80211-for-davem-2019-02-22' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Three more fixes: * mac80211 mesh code wasn't allocating SKB tailroom properly in some cases * tx_sk_pacing_shift should be 7 for better performance * mac80211_hwsim wasn't propagating genlmsg_reply() errors ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: remove link change polling code and info from nicpfVadim Lomovtsev
Since link change polling routine was moved to nicvf side, we don't need anymore polling function at nicpf side along with link status info for all enabled Vfs as at VF side this info is already tracked. This commit is to remove unnecessary code & fields from nicpf structure. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: move link state polling function to VFVadim Lomovtsev
Move the link change polling task to VF side in order to prevent races between VF and PF while sending link change message(s). This commit is to implement link change request to be initiated by VF. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: add mutex to protect mailbox from concurrent calls for same VFVadim Lomovtsev
In some cases it could happen that nicvf_send_msg_to_pf() could be called concurrently for the same NIC VF, and thus re-writing mailbox contents and breaking messaging sequence with PF by re-writing NICVF data. This commit is to implement mutex for NICVF to protect mailbox registers and NICVF messaging control data from concurrent access. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: rework xcast message structure to make it fit into 64 bitVadim Lomovtsev
To communicate to PF each of ThunderX NIC VF uses mailbox which is pair of 64 bit registers available to both VFn and PF. This commit is to change the xcast message structure in order to fit it into 64 bit. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: add nicvf_send_msg_to_pf result check for set_rx_mode_taskVadim Lomovtsev
The rx_set_mode invokes number of messages to be send to PF for receive mode configuration. In case if there any issues we need to stop sending messages and release allocated memory. This commit is to implement check of nicvf_msg_send_to_pf() result. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: make CFG_DONE message to run through generic send-ack sequenceVadim Lomovtsev
At the end of NIC VF initialization VF sends CFG_DONE message to PF without using nicvf_msg_send_to_pf routine. This potentially could re-write data in mailbox. This commit is to implement common way of sending CFG_DONE message by the same way with other configuration messages by using nicvf_send_msg_to_pf() routine. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to ↵Vadim Lomovtsev
private for each of them. Having one work queue for receive mode configuration ndo_set_rx_mode() call for all VFs results in making each of them wait till the set_rx_mode() call completes for another VF if any of close, set receive mode and change flags calls being already invoked. Potentially this could cause device state change before appropriate call of receive mode configuration completes, so the call itself became meaningless, corrupt data or break configuration sequence. We don't need any delays in NIC VF configuration sequence so having delayed work call with 0 delay has no sense. This commit is to implement one work queue for each NIC VF for set_rx_mode task and to let them work independently and replacing delayed_work with work_struct. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: thunderx: correct typo in macro nameVadim Lomovtsev
Correct STREERING to STEERING at macro name for BGX steering register. Signed-off-by: Vadim Lomovtsev <vlomovtsev@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22team: use operstate consistently for linkupGeorge Wilkie
When a port is added to a team, its initial state is derived from netif_carrier_ok rather than netif_oper_up. If it is carrier up but operationally down at the time of being added, the port state.linkup will be set prematurely. port state.linkup should be set consistently using netif_oper_up rather than netif_carrier_ok. Fixes: f1d22a1e0595 ("team: account for oper state") Signed-off-by: George Wilkie <gwilkie@vyatta.att-mail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22net: phy: aquantia: Use get_features for the PHYs abilitiesAndrew Lunn
Use the new PHY driver call to get the PHYs supported features. Signed-off-by: Andrew Lunn <andrew@lunn.ch> [hkallweit1@gmail.com: removed new config_init callback from patch] Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22r8152: Fix an error on RTL8153-BD MAC Address Passthrough supportDavid Chen
RTL8153-BD is used in Dell DA300 type-C dongle. Added RTL8153-BD support to activate MAC address pass through on DA300. Apply correction on previously submitted patch in net.git tree. Signed-off-by: David Chen <david.chen7@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22ipvlan: disallow userns cap_net_admin to change global mode/flagsDaniel Borkmann
When running Docker with userns isolation e.g. --userns-remap="default" and spawning up some containers with CAP_NET_ADMIN under this realm, I noticed that link changes on ipvlan slave device inside that container can affect all devices from this ipvlan group which are in other net namespaces where the container should have no permission to make changes to, such as the init netns, for example. This effectively allows to undo ipvlan private mode and switch globally to bridge mode where slaves can communicate directly without going through hostns, or it allows to switch between global operation mode (l2/l3/l3s) for everyone bound to the given ipvlan master device. libnetwork plugin here is creating an ipvlan master and ipvlan slave in hostns and a slave each that is moved into the container's netns upon creation event. * In hostns: # ip -d a [...] 8: cilium_host@bond0: <BROADCAST,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l3 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.0.1/32 scope link cilium_host valid_lft forever preferred_lft forever [...] * Spawn container & change ipvlan mode setting inside of it: # docker run -dt --cap-add=NET_ADMIN --network cilium-net --name client -l app=test cilium/netperf 9fff485d69dcb5ce37c9e33ca20a11ccafc236d690105aadbfb77e4f4170879c # docker exec -ti client ip -d a [...] 10: cilium0@if4: <BROADCAST,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l3 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.197.43/32 brd 10.41.197.43 scope global cilium0 valid_lft forever preferred_lft forever # docker exec -ti client ip link change link cilium0 name cilium0 type ipvlan mode l2 # docker exec -ti client ip -d a [...] 10: cilium0@if4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.197.43/32 brd 10.41.197.43 scope global cilium0 valid_lft forever preferred_lft forever * In hostns (mode switched to l2): # ip -d a [...] 8: cilium_host@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.0.1/32 scope link cilium_host valid_lft forever preferred_lft forever [...] Same l3 -> l2 switch would also happen by creating another slave inside the container's network namespace when specifying the existing cilium0 link to derive the actual (bond0) master: # docker exec -ti client ip link add link cilium0 name cilium1 type ipvlan mode l2 # docker exec -ti client ip -d a [...] 2: cilium1@if4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 10: cilium0@if4: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.197.43/32 brd 10.41.197.43 scope global cilium0 valid_lft forever preferred_lft forever * In hostns: # ip -d a [...] 8: cilium_host@bond0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000 link/ether 0c:c4:7a:e1:3d:cc brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 65535 ipvlan mode l2 bridge numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535 inet 10.41.0.1/32 scope link cilium_host valid_lft forever preferred_lft forever [...] One way to mitigate it is to check CAP_NET_ADMIN permissions of the ipvlan master device's ns, and only then allow to change mode or flags for all devices bound to it. Above two cases are then disallowed after the patch. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Small set of three regression fixing patches, things are looking pretty good here. - Fix cxgb4 to work again with non-4k page sizes - NULL pointer oops in SRP during sg_reset" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: iw_cxgb4: cq/qp mask depends on bar2 pages in a host page cxgb4: Export sge_host_page_size to ulds RDMA/srp: Rework SCSI device reset handling
2019-02-22Merge remote-tracking branch 'net-next/master' into mac80211-nextJohannes Berg
Merge net-next to resolve a conflict and to get the mac80211 rhashtable fixes so further patches can be applied on top. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211: update HE IEs to D3.3Liad Kaufman
Update element names and new fields according to D3.3 of the HE spec. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22mac80211_hwsim: propagate genlmsg_reply return codeLi RongQing
genlmsg_reply can fail, so propagate its return code Signed-off-by: Li RongQing <lirongqing@baidu.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-21rocker: Add missing break for PRE_BRIDGE_FLAGSFlorian Fainelli
A missing break keyword should have been added after adding support for PRE_BRIDGE_FLAGS. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 93700458ff63 ("rocker: Check Handle PORT_PRE_BRIDGE_FLAGS") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: clear command queue's registers when unloading VF driverHuazhong Tan
According to the hardware's description, the driver should clear the command queue's registers when uloading VF driver. Otherwise, these existing value may lead the IMP get into a wrong state. Fixes: fedd0c15d288 ("net: hns3: Add HNS3 VF IMP(Integrated Management Proc) cmd interface") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: uninitialize command queue while unloading PF driverHuazhong Tan
According to the hardware's description, the driver should clear the command queue's registers when uloading driver. Otherwise, these existing value may lead the IMP get into a wrong state. Also this patch adds hclge_cmd_uninit() to do the command queue uninitialization which includes clearing registers and freeing memory. Fixes: 68c0a5c70614 ("net: hns3: Add HNS3 IMP(Integrated Mgmt Proc) Cmd Interface Support") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: Record VF vlan tablesliuzhongzhu
Record the vlan tables that the VF sends to the chip. After the VF exception, the PF actively clears the VF to chip config. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: Record VF unicast and multicast tablesliuzhongzhu
Record the unicast and multicast tables that the VF sends to the chip. After the VF exception, the PF actively clears the VF to chip config. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: fix 6th bit of ppp mpf abnormal errorsWeihang Li
This patch modify print message of 6th bit of ppp mpf abnormal errors, there is a extra letter e in it. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: enable 8~11th bit of mac common msi-x errorWeihang Li
These bits are enabled now and have been test. Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21net: hns3: some bugfix of ppu(rcb) ras errorsWeihang Li
The 3rd and 4th of PPU(RCB) PF Abnormal is RAS errors instead of MSI-X like other bits. This patch adds process of handling and logging this two bits. Otherwise, this patch modifies print message of 28th and 29th bit of PPU MPF Abnormal errors, which keep same with other errors now. Fixes: f69b10b317f9 ("net: hns3: handle hw errors of PPU(RCB)") Signed-off-by: Weihang Li <liweihang@hisilicon.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 16:05:53 +0000