summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2010-08-19ixgbe: combine Rx into into ixgbe_configure_rxAlexander Duyck
The Rx init is currently split over ixgbe_configure, ixgbe_configure_rx, and ixgbe_up_complete. Instead of leaving it split over 3 function it is easier to consolidate them all into ixgbe_configure_rx. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: pull all Tx init into ixgbe_configure_txAlexander Duyck
The Tx init was spread out over ixgbe_configure, ixgbe_configure_tx, and ixgbe_up_complete. This change combines all of that into the ixgbe_configure_tx function in order to simplify the Tx init path. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: move all GPIE register config into a single functionAlexander Duyck
This change moves all GPIE register configuration into a single function. The advantage of this is that we can avoid a number of unnecessary read/modify/write cycles on the register. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: Move virtualization config into a separate functionAlexander Duyck
This change moves the configuration that was done in configure_rx into a separate virtualization configuration function. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: move all Rx DMA control register writes to one central locationAlexander Duyck
This change moves all of the Rx DMA control register writes to one central location. This should help to avoid accidentally overwriting existing settings. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: Move max frame size and Rx buffer length configuration into a functionAlexander Duyck
This change consolidates all of the Rx max frame size and Rx buffer length configuration into a single function. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: remove redundant configuration of vmolr, rename generic variableAlexander Duyck
The vmolr is configured already in ixgbe_set_rx_mode for the PF so there is no need to set it again in ixgbe_configure_rx. Instead of using the variable name reg, it is easier to just rename it to gcr_ext to reflect the register contents that the variable holds. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: bump PS header size to 512 bytesAlexander Duyck
Bump the header size for packet split to 512 bytes since this makes the best use of the 1k buffer that is allocated for any skb 512 bytes or smaller. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: combine accesses to FCTRL register into ixgbe_set_rx_modeAlexander Duyck
We are accessing the FCTRL register in multiple spots in the init path and we can simplify things by combining the configuration all into ixgbe_set_rx_mode. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: pull PSRTYPE configuration into a separate functionAlexander Duyck
The configuration of PSRTYPE was being done conditionally on if packet split is enabled or not. It can be configured always since it will not have any effect when packet split is not enabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: pull ring configuration into it's own functionAlexander Duyck
These changes add ixgbe_configure_rx_ring which is used to setup the base function pointers for the ring. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: consolidate all setting of MRQC into one functionAlexander Duyck
This change simplifies the configuration of MRQC by consolidating the setting of it into one function. As such the register is no longer set in multiple places which should make any future changes easier to work with. In addition we can combine RSS related register writes into the call since enabling all of those bits without enabling RSS itself in MRQC should have no effect. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: move Tx ring configuration into a separate functionAlexander Duyck
This patch moves the Tx ring configuration into a separate function. In addition the function drops the setting of the head writeback RO bit since head writeback is no longer used within ixgbe. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: move configuration of the MTQC register into it's own functionAlexander Duyck
This patch moves the configuration of the MTQC register into it's own function call similar to ixgbe_setup_mrqc. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: combine two modifications of TXDCTL into oneAlexander Duyck
In ixgbe_up_complete we were doing a read-modify-write of TXDCTL followed by another one just a few lines further down. Instead of performing two separate read-modify-writes it would make more sense to combine the two into one. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: move setting of GSO size for 82598 into ixgbe_configure_dcbAlexander Duyck
We are unnecessarily modifying the GSO size for all HW when we don't need to. The code can be simplified by moving the check for DCB and the adjustment of the GSO size for 82598 into ixgbe_configure_dcb. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: remove redundant DMA alignment codeAlexander Duyck
This patch removes the redundant DMA alignment code from the Rx buffer allocation path. This code is no longer necessary since all x86 buffers are now DMA aligned due to recent changes to NET_IP_ALIGN and NET_SKB_PAD. It also moves the setting of the Rx queue value into the allocation path since it is more likely that the queue mapping will still be in the cache at the time of allocation. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ixgbe: cleanup ixgbe_get_drvinfo to be extra careful with buffer boundariesDon Skidmore
Make the code in ixgbe_get_drvinfo more protected against buffer overflow boundaries by using snprintf and sizeof with snprintf. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19e1000e: don't check for alternate MAC addr on parts that don't support itBruce Allan
From: Bruce Allan <bruce.w.allan@intel.com> The alternate MAC address feature is only supported by 80003ES2LAN and 82571 LOMs as well as a couple 82571 mezzanine cards. Checking for an alternate MAC address on other parts can fail leading to the driver not able to load. This patch limits the check for an alternate MAC address to be done only for parts that support the feature. This issue has been around since support for the feature was introduced to the e1000e driver in 2.6.34. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Reported-by: Fabio Varesano <fax8@users.sourceforge.net> Cc: stable@kernel.org Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19e1000e: disable ASPM L1 on 82573Bruce Allan
On the e1000-devel mailing list, Nils Faerber reported latency issues with the 82573 LOM on a ThinkPad X60. It was found to be caused by ASPM L1; disabling it resolves the latency. The issue is present in kernels back to 2.6.34 and possibly 2.6.33. Reported-by: Nils Faerber <nils.faerber@kernelconcepts.de> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Cc: stable@kernel.org Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19xilinx_emaclite: netpoll supportMichal Simek
Netconsole requires poll support. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ll_temac: Fix poll implementationMichal Simek
Functions ll_temac_rx_irq and ll_temac_tx_irq have pointer to net_device as second parameter not pointer to temac_local. Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19netxen: fix a race in netxen_nic_get_stats()Eric Dumazet
Dont clear netdev->stats, it might give transient wrong values to concurrent stat readers. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19qlnic: fix a race in qlcnic_get_stats()Eric Dumazet
Dont clear netdev->stats, it might give transient wrong values to concurrent stat readers. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19net: sh_eth: remove unused variableKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19netxen: update version 4.0.74Amit Kumar Salecha
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19netxen: fix inconsistent lock stateAmit Kumar Salecha
Spin lock rds_ring->lock is used in poll routine, so other users should use spin_lock_bh(). While posting rx buffers from netxen_nic_attach, rds_ring->lock is not required, so cleaning it instead of fixing it by spin_lock_bh(). Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19slip: fix get_stats() methodEric Dumazet
Use integrated net_device_stats instead of a static one, and make sure no transient values are feeded. ndo_get_stats() can be called by concurrent cpus. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19vxge: Implement 64bit statsEric Dumazet
vxge_get_stats() is racy, since it clears a block of memory (net_stats) possibly still used by other cpus. We can update this driver to full 64bit stats, since ndo_get_stats64() provides a private block to store results, and driver maintains 64bit counters already. We also remove net_stats field from struct vxge_sw_stats Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ether3: Use net_device_stats from struct net_deviceTobias Klauser
struct net_device has its own struct net_device_stats member, so use this one instead of a private copy in the ether1_priv struct. As the new ndo_get_stats function would just return dev->stats we can omit it. This patch also removes an incorrect memset of the stats on open. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ether1: Use net_device_stats from struct net_deviceTobias Klauser
struct net_device has its own struct net_device_stats member, so use this one instead of a private copy in the ether1_priv struct. As the new ndo_get_stats function would just return dev->stats we can omit it. This patch also removes an incorrect memset of the stats on open. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19ibmveth: Fix opps during MTU change on an active deviceRobert Jennings
This fixes the following opps which can occur when trying to deallocate receive buffer pools when changing the MTU of an active ibmveth device. Oops: Kernel access of bad area, sig: 11 [#1] NIP: d000000004db00e8 LR: d000000004db00ac CTR: 0000000000591038 REGS: c00000007fff39d0 TRAP: 0300 Not tainted (2.6.36-rc1) MSR: 8000000000009032 <EE,ME,IR,DR> CR: 22248244 XER: 00000002 DAR: 0000000000000488, DSISR: 0000000042000000 TASK = c00000007c463790[6531] 'netserver' THREAD: c00000007a154000 CPU: 0 GPR00: 0000000000000000 c00000007fff3c50 d000000004dbd360 0000000000000001 GPR04: 0000000000000001 1fffffffffffffff 000000000000043c c00000007a8e9f60 GPR08: c00000007a8e9e20 0000000000000245 0000000000000488 0000000000000000 GPR12: 00000000000000c0 c000000006d70000 c00000007bfec098 c00000007bfebc2c GPR16: c00000007a157c78 0000000000000000 0000000000000001 0000000000000000 GPR20: 0000000000000001 0000000000000010 c000000000b51180 c00000007a8e9d90 GPR24: c00000007a8e9da0 c00000007a8e9580 00000000000005ea 00000000000002ff GPR28: 0000000000000004 0000000000000080 c000000000a946f8 c00000007a8e9d80 NIP [d000000004db00e8] .ibmveth_remove_buffer_from_pool+0xe8/0x130 [ibmveth] LR [d000000004db00ac] .ibmveth_remove_buffer_from_pool+0xac/0x130 [ibmveth] Call Trace: [c00000007fff3c50] [d000000004db00ac] .ibmveth_remove_buffer_from_pool+0xac/0x130 [ibmveth] (unreliable) [c00000007fff3cf0] [d000000004db31dc] .ibmveth_poll+0x30c/0x460 [ibmveth] [c00000007fff3dd0] [c00000000042c4b8] .net_rx_action+0x178/0x278 [c00000007fff3eb0] [c000000000093cf0] .__do_softirq+0x118/0x1f8 [c00000007fff3f90] [c00000000002ab3c] .call_do_softirq+0x14/0x24 [c00000007a157600] [c00000000000e3e4] .do_softirq+0xec/0x110 [c00000007a1576a0] [c000000000093394] .local_bh_enable_ip+0xb4/0xe0 [c00000007a157720] [c0000000004f0bac] ._raw_spin_unlock_bh+0x3c/0x50 [c00000007a157790] [c0000000004186e0] .release_sock+0x158/0x188 [c00000007a157840] [c000000000479660] .tcp_recvmsg+0x560/0x9b8 [c00000007a157970] [c0000000004a0d78] .inet_recvmsg+0x80/0xd8 [c00000007a157a00] [c000000000413e28] .sock_recvmsg+0x128/0x178 [c00000007a157bf0] [c0000000004164ac] .SyS_recvfrom+0xb4/0x148 [c00000007a157d70] [c000000000411f3c] .SyS_socketcall+0x274/0x360 [c00000007a157e30] [c0000000000085b4] syscall_exit+0x0/0x40 Reported-by: Rafael Camarda Silva Folco <rfolco@linux.vnet.ibm.com> Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19net: simplify flags for tx timestampingOliver Hartkopp
This patch removes the abstraction introduced by the union skb_shared_tx in the shared skb data. The access of the different union elements at several places led to some confusion about accessing the shared tx_flags e.g. in skb_orphan_try(). http://marc.info/?l=linux-netdev&m=128084897415886&w=2 Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19drivers/net/sunvnet.c: Use pr_<level> and netdev_<level>Joe Perches
Use the current message logging styles. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19drivers/net/sungem: Use netdev_<level>, netif_<level> and pr_<level>Joe Perches
Use the current logging message styles. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19sunhme: Use return value of register_netdevTobias Klauser
Use the return value provided by register_netdev on error instead of using a previously set value. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-19greth: Use return value of register_netdevTobias Klauser
Use the return value provided by register_netdev on error instead of hard setting it to -ENOMEM. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-18ehea: Fix synchronization between HW and SW send queueAndre Detsch
ehea: Fix synchronization between HW and SW send queue When memory is added to / removed from a partition via the Memory DLPAR mechanism, the eHEA driver has to do a couple of things to reflect the memory change in its own IO address translation tables. This involves stopping and restarting the HW queues. During this operation, it is possible that HW and SW pointer into these queues get out of sync. This results in a situation where packets that are attached to a send queue are not transmitted immediately, but delayed until further X packets have been put on the queue. This patch detects such loss of synchronization, and resets the ehea port when needed. Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-18bnx2x: Update bnx2x version to 1.52.53-4Yaniv Rosner
Update bnx2x version to 1.52.53-4 Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-18bnx2x: Fix PHY locking problemYaniv Rosner
PHY locking is required between two ports for some external PHYs. Since initialization was done in the common init function (called only on the first port initialization) rather than in the port init function, there was in fact no PHY locking between the ports. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-18net: add Fast Ethernet driver for PXA168.Sachin Sanap
Signed-off-by: Sachin Sanap <ssanap@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-18drivers/net/qlcnic: Use available error codesJulia Lawall
The error code is stored in the variable err, but it is the variable ret that is returned instead. So store the error code in ret. Err is then useless. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression x; constant C; @@ if (...) { ... x = -C ... when != x ( return <+...x...+>; | return NULL; | return; | * return ...; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-18drivers/net/pcmcia: Use pr_<level> and netdev_<level>Joe Perches
On Mon, 2010-08-09 at 17:34 +0200, Dominik Brodowski wrote: > look good from a PCMCIA point of view, therefore: > Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> If PCMCIA is still being looked after, then here's another for you, maybe for 2.6.37. Use the more descriptive logging message styles. There are whitespace/indentation errors in the original sources that these changes do not modify, so checkpatch errors were cheerfully ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-18s2io: Update driver versionJon Mason
Update s2io driver's version to reflect the series of patches. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-18s2io: remove unused codeJon Mason
usr_addrs is never referenced outside the initial struct population during open, thus making it unnecessary. Remove it, the code that references it, and the struct that it is the only user of. Signed-off-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-18iwlwifi: use long monitor timer for 5300 seriesWey-Yi Guy
For 5000 series of devices, use long monitor timer to check stuck tx queues. This modification apply to all the 5000 series including 5300 and others. Cc: stable@kernel.org [2.6.35] Reported-by: drago01 <drago01@gmail.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-18drivers/net/wireless: Restore upper case words in wiphy_<level> messagesJoe Perches
Commit c96c31e499b70964cfc88744046c998bb710e4b8 "(drivers/net/wireless: Use wiphy_<level>)" inadvertently changed some upper case words to lower case. Restore the original case. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-17drivers/net: Convert unbounded kzalloc calls to kcallocJoe Perches
These changes may be slightly safer in some instances. There are other kzalloc calls with a multiply, but those calls are typically "small fixed #" * sizeof(some pointer)" and those are not converted. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-17iwlwifi: fix 3945 filter flagsJohannes Berg
Applying the filter flags directly as done since commit 3474ad635db371b0d8d0ee40086f15d223d5b6a4 Author: Johannes Berg <johannes.berg@intel.com> Date: Thu Apr 29 04:43:05 2010 -0700 iwlwifi: apply filter flags directly broke 3945 under some unknown circumstances, as reported by Alex. Since I want to keep the direct application of filter flags on iwlagn, duplicate the code into both 3945 and agn and remove committing the RXON that broke things from the 3945 version. Cc: stable@kernel.org [2.6.35] Reported-by: Alex Romosan <romosan@sycorax.lbl.gov> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-17ipw2100: don't sync status queue entriesJohn W. Linville
These are allocated with pci_alloc_consistent, so calling pci_dma_sync_single_for_cpu is incorrect usage of the API. Remove this misuse and consequently avoid the following backtrace: WARNING: at lib/dma-debug.c:902 check_sync+0xce/0x43a() Hardware name: 2373HU6 ipw2100 0000:02:02.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x0000000034e88008] [size=8 bytes] Modules linked in: microcode ipw2100(+) snd_seq_device ppdev libipw nsc_ircc snd_pcm lib80211 video output irda parport_pc cfg80211 parport thinkpad_acpi e1000 iTCO_wdt crc_ccitt snd_timer iTCO_vendor_support snd i2c_i801 pcspkr rfkill soundcore joydev snd_page_alloc yenta_socket radeon ttm drm_kms_helper drm i2c_algo_bit i2c_core [last unloaded: scsi_wait_scan] Pid: 0, comm: swapper Tainted: G W 2.6.35-wl+ #8 Call Trace: [<c043aa42>] warn_slowpath_common+0x6a/0x7f [<c05d252a>] ? check_sync+0xce/0x43a [<c043aaca>] warn_slowpath_fmt+0x2b/0x2f [<c05d252a>] check_sync+0xce/0x43a [<c046189a>] ? print_lock_contention_bug+0x11/0xb2 [<c05d2b6f>] debug_dma_sync_single_for_cpu+0x47/0x49 [<c06cbd3c>] ? ehci_irq+0x31/0x331 [<f82a224a>] ? ipw2100_irq_tasklet+0x24/0x5e9 [ipw2100] [<f82a224a>] ? ipw2100_irq_tasklet+0x24/0x5e9 [ipw2100] [<f82a221d>] pci_dma_sync_single_for_cpu.clone.1+0x42/0x4b [ipw2100] [<f82a23a2>] ipw2100_irq_tasklet+0x17c/0x5e9 [ipw2100] [<c043fd87>] tasklet_action+0x78/0xcb [<c0440293>] __do_softirq+0xc4/0x183 [<c044038d>] do_softirq+0x3b/0x5f [<c04404d0>] irq_exit+0x3a/0x6d [<c0404423>] do_IRQ+0x8b/0x9f [<c04038b5>] common_interrupt+0x35/0x3c [<c062ecfa>] ? acpi_idle_enter_simple+0xfe/0x13c [<c045007b>] ? exit_itimers+0x2d/0x73 [<c062ecfc>] ? acpi_idle_enter_simple+0x100/0x13c [<c070bf10>] cpuidle_idle_call+0x78/0xdc [<c040251c>] cpu_idle+0x9b/0xb7 [<c07b1dd2>] rest_init+0xa6/0xab [<c0a4b96d>] start_kernel+0x389/0x38e [<c0a4b0c9>] i386_start_kernel+0xc9/0xd0 Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 16:52:06 +0000