summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2017-06-13rtlwifi: btcoex: let btcoex get wifi rssi and link statusYan-Hsuan Chuang
Instead of rssi status, the btcoex also needs to get the link status of the wifi. In addition, some of the rssi status can be merged into link status. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: remove unused display functionsYan-Hsuan Chuang
These display functions are useless and will not be called in the future. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: bind BT coex information with wifi driverYan-Hsuan Chuang
When initializing, gather BT information in struct btcoexist and provide them to wifi driver. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: hook external functions for newer chipsYan-Hsuan Chuang
Hook the external functions for newer ICs such as 8821a and 8192e. Rename ex_halbtc8192e2ant_halt_notify to ex_btc8192e2ant_halt_notify. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: add settings before the hardware is readyYan-Hsuan Chuang
When the hardware is turned on and in the initialization stage, the PTA circuit is unstable. Hence we need to force some hardware settings to make sure the PTA circuit work correctly, otherwise it may affect the user's experience. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: hook external PnP notify by chip for wifi driverYan-Hsuan Chuang
Hook the chip-specific PnP notify functions for the wifi driver to notify btcoexistence. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: settings before firmware is downloadedYan-Hsuan Chuang
The btcoex is sometimes unstable because there are some unexpected behaviors before the firmware has been downloaded successfully. Therefore we force the antenna path settings to avoid this, then let the firmware control the btcoexistence when the firmware is ready. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: rename ex_halbtc*ant to ex_btc*antYan-Hsuan Chuang
These external functions are for BT-coexistence, so remove the "hal" prefix for consistancy. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: add macros to check chip typeYan-Hsuan Chuang
For some external functions that have hardware dependency, we need to know the type of the hardware before invoking them. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13qtnfmac: check band before allocating cmd_skb to avoid resource leakColin Ian King
The current code allocates cmd_skb and then will leak this if band->band is an illegal value. It is simpler to sanity check the band first before allocating cmd_skb so that we don't have to free cmd_skb if an invalid band occurs. Detected by CoverityScan, CID#1437561 ("Resource Leak") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Igor Mitsyanko <igor.mitsyanko.os@quantenna.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13mwifiex: make function mwifiex_ret_pkt_aggr_ctrl staticColin Ian King
function mwifiex_ret_pkt_aggr_ctrl can be made static as it does not need to be in global scope. Cleans up sparse warning: "symbol 'mwifiex_ret_pkt_aggr_ctrl' was not declared. Should it be static?" Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13brcmfmac: Fix glom_skb leak in brcmf_sdiod_recv_chainPeter S. Housel
An earlier change to this function (3bdae810721b) fixed a leak in the case of an unsuccessful call to brcmf_sdiod_buffrw(). However, the glom_skb buffer, used for emulating a scattering read, is never used or referenced after its contents are copied into the destination buffers, and therefore always needs to be freed by the end of the function. Fixes: 3bdae810721b ("brcmfmac: Fix glob_skb leak in brcmf_sdiod_recv_chain") Fixes: a413e39a38573 ("brcmfmac: fix brcmf_sdcard_recv_chain() for host without sg support") Cc: stable@vger.kernel.org # 4.9.x- Signed-off-by: Peter S. Housel <housel@acm.org> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13brcmfmac: Fix grammar issue in error messageMartin Michlmayr
Fix grammar issue in error message about ISO3166. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13brcmfmac: add scheduled scan support for specified BSSIDsArend Van Spriel
Add support to handle scheduled scan request containing BSSID in the matchsets. The firmware can send event upon finding BSSIDs and SSIDs. To get these in one event the bit REPORT_SEPARATELY needed to be removed from the flags in brcmf_pno_config(). Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13brcmfmac: add mutex to protect pno requestsArend Van Spriel
The request references kept in pno are accessed in user-space context and in firmware event handler context. As such we need to protect it with a lock. As both context allow sleep a mutex seems appropriate. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13brcmfmac: add support multi-scheduled scanArend Van Spriel
This change adds support for multi-scheduled scan in the driver. It currently relies on g-scan support in firmware and will set struct wiphy::max_sched_scan_reqs accordingly. This is limited to 16 concurrent requests. The firmware currently has a limit of 64 channels that can be configured for all requests in total regardless whether there are duplicates. So if a request uses 35 channels there are 29 channels left for another request. When user-space does not specify any channels cfg80211 will add all channels defined by the wiphy instance to the request, which makes reaching the limit rather easy for dual-band devices. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-12Merge tag 'iwlwifi-next-for-kalle-2017-06-06' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next First batch of iwlwifi driver patches 4.13 * Loads of FW API documentation improvements (for tools and htmldoc); * Continued work for the new A000 family; * Bumped the maximum supported FW API to 31; * Improve the differentiation between 8000, 9000 and A000 families; * A lot of fixes and cleanups here and there; kvalo: There were conflicts iwl_mvm_stop_device() and iwl_mvm_tcool_set_cur_state(). The former was easy but latter needed more thought. Apparently the mutex was taken too late, so I fixed so that the mutex is taken first and then check for iwl_mvm_firmware_running().
2017-06-12Merge tag 'wireless-drivers-next-for-davem-2017-06-12' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.13 The first pull request for 4.13. We have a new driver qtnfmac, but also rsi driver got a support for new firmware and supporting ath10k SDIO devices was started. Major changes: ath10k * add initial SDIO support (still work in progress) rsi * new loading for the new firmware version rtlwifi * final patches for the new btcoex support rt2x00 * add device ID for Epson WN7512BEP qtnfmac * new driver for Quantenna QSR10G chipsets ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-12sh_eth: add support for changing MTUNiklas Söderlund
The hardware supports the MTU to be changed and the driver it self is somewhat prepared to support this. This patch hooks up the callbacks to be able to change the MTU from user-space. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-11Merge tag 'mlx5-updates-2017-06-11' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2017-06-11 This series provides updates to mlx5 header rewrite feature, from Or Gerlitz. and three more small updates From maor and eran. ------- Or says: Packets belonging to flows which are different by matching may still need to go through the same header re-writes (e.g set the current routing hop MACs and issue TTL decrement). To minimize the number of modify header IDs, we add a cache for header re-write IDs which is keyed by the binary chain of modify header actions. The caching is supported for both eswitch and NIC use-cases, where the actual conversion of the code to use caching comes in separate patches, one per use-case. Using a per field mask field, the TC pedit action supports modifying partial fields. The last patch enables offloading that. ------- From Maor, update flow table commands layout to the latest HW spec. From Eran, ethtool connector type reporting updates. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-10net: ethernet: ti: cpdma: do not enable host error misc irqGrygorii Strashko
CPSW driver does not handle this interrupt, so there are no reasons to enable it in hardware. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-10net: ethernet: ti: cpsw: enable HWTSTAMP_FILTER_PTP_V1_L4_EVENT filterGrygorii Strashko
CPSW driver supports PTP v1 messages, but for unknown reasons this filter is not advertised. As result, ./tools/testing/selftests/networking/timestamping/timestamping utility can't be used for testing of CPSW RX timestamping with option SOF_TIMESTAMPING_RX_HARDWARE, because it uses HWTSTAMP_FILTER_PTP_V1_L4_SYNC filter. Hence, fix it by advertising HWTSTAMP_FILTER_PTP_V1_L4_XXX filters in CPSW driver. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-10net: fec: Add a fec_enet_clear_ethtool_stats() stub for CONFIG_M5272Fabio Estevam
Commit 2b30842b23b9 ("net: fec: Clear and enable MIB counters on imx51") introduced fec_enet_clear_ethtool_stats(), but missed to add a stub for the CONFIG_M5272=y case, causing build failure for the m5272c3_defconfig. Add the missing empty stub to fix the build failure. Fixes: Commit 2b30842b23b9 ("net: fec: Clear and enable MIB counters on imx51") Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-10bonding: warn user when 802.3ad speed is unknownNicolas Dichtel
Goal is to advertise the user when ethtool speeds and 802.3ad speeds are desynchronized. When this case happens, the kernel needs to be patched. Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09cxgb4: fix memory leak in init_one()Ganesh Goudar
Free up mbox_log allocated for PF0 to PF3. Fixes: 7829451c695e ("cxgb4: Add control net_device for configuring PCIe VF") Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09qed: add qed_int_sb_init() stub functionArnd Bergmann
When CONFIG_QED_SRIOV is disabled, we get a build error: drivers/net/ethernet/qlogic/qed/qed_int.c: In function 'qed_int_sb_init': drivers/net/ethernet/qlogic/qed/qed_int.c:1499:4: error: implicit declaration of function 'qed_vf_set_sb_info'; did you mean 'qed_mcp_get_resc_info'? [-Werror=implicit-function-declaration] All the other declarations have a 'static inline' stub as an alternative here, so this adds one more for qed_int_sb_init. Fixes: 50a207147fce ("qed: Hold a single array for SBs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09qed: collect GSI port statisticsMintz, Yuval
The LL2 statistics already have place holders for these, but haven't populated them so far. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09qed: Call rx_release_cb() when flushing LL2Mintz, Yuval
Driver to inform the connection owner that the its buffers are being released as part of a flush. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09qed: No need for LL2 frags indicationMintz, Yuval
This is a legacy leftover; There's no current flow where 'frags_mapped' would be set. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09qed*: LL2 callback operationsMichal Kalderon
LL2 today is interrupt driven - when tx/rx completion arrives [or any other indication], qed needs to operate on the connection and pass the information to the protocol-driver [or internal qed consumer]. Since we have several flavors of ll2 employeed by the driver, each handler needs to do an if-else to determine the right functionality to use based on the connection type. In order to make things more scalable [given that we're going to add additional types of ll2 flavors] move the infrastrucutre into using a callback-based approach - the callbacks would be provided as part of the connection's initialization parameters. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09qed: LL2 code relocationsMintz, Yuval
Instead of having the OOO logic packetd, divide it with rest of code according to establish/release flows. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09qed: Cleaner seperation of LL2 inputsMintz, Yuval
A LL2 connection [qed_ll2_info] has a sub-structure of type qed_ll2_conn that contain various inputs for ll2 acquisition, but the connection also utilizes a couple of other inputs. Restructure the input structure to include all the inputs and refactor the code necessary to populate those. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09qed: Revise ll2 Rx completionMintz, Yuval
This introduces qed_ll2_comp_rx_data as a public struct and moves handling of Rx packets in LL2 into using it. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09qed: LL2 to use packed information for txMintz, Yuval
First step in revising the LL2 interface, this declares qed_ll2_tx_pkt_info as part of the ll2 interface, and uses it for transmission instead of receiving lots of parameters. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09r8152: replace napi_complete with napi_complete_donehayeswang
Change from using napi_complete to napi_complete_done to allow for the use of gro_flush_timeout in tuning network processing. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09r8152: avoid rx queue more than 1000 packetshayeswang
Stop queuing rx packets if it is more than 1000. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09r8152: check if disabling ALDPS is finishedhayeswang
Use PLA 0xe000 bit 8 to check if disabling ALDPS is finished. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09r8152: move the initialization to reset_resume functionhayeswang
Move tp->rtl_ops.init() from rtl8152_resume() to rtl8152_reset_resume(). The initialization is only necessary for reset_resume(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09r8152: move the default coalesce setting for RTL8153hayeswang
Only RTL8153 could set coalesce, so move the default setting for rtl8152_probe() to r8153_init(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09r8152: adjust U2P3 for RTL8153hayeswang
Use another way to keep disabling the U2P3 for both RTL_VER_03 and RTL_VER_04. Move enabling U2P3 from r8153_init() to r8153_hw_phy_cfg(). The engineer ask the setting should be done after PHY settings. Disable U2P3 first in rtl8153_up(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09r8152: adjust rtl8153_runtime_enable functionhayeswang
Adjust the order of rtl8153_runtime_enable() according to the suggestion from the engineer. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09r8152: move the setting of rx aggregationhayeswang
Move the setting from r8153_first_init() to r8153_init(). It only needs to be set once. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09r8152: adjust the settings about MAC clock speed down for RTL8153hayeswang
The MAC clock speed down could be enabled if the U1/U2 is disabled. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09r8152: adjust lpm settings for RTL8153hayeswang
Enable lpm after r8153_init() and remove other enable/disable lpm. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09r8152: add r8153_phy_status functionhayeswang
Use r8153_phy_status() to check phy status of RTL8153. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09cxgb4: handle interrupt raised when FW crashesRahul Lakkireddy
Handle TIMER0INT when FW crashes. Check for PCIE_FW[FW_EVAL] and if it says "Device FW Crashed", then treat it as fatal. Else, non-fatal. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09nfp: report application FW build name in ethtool -iJakub Kicinski
Make sure application FW build name is NULL-terminated and print it as a part of ethtool's firmware version string. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09nfp: keep MIP object aroundJakub Kicinski
Microcode Information Page contains some useful information, like application firmware build name. Keep it around, similar to RTSym and HWInfo. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09nfp: remove automatic caching of HWInfoJakub Kicinski
Make callers take care of managing life time of HWInfo. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09nfp: remove automatic caching of RTsym tableJakub Kicinski
The fact that RTsym table is cached inside nfp_cpp handle is a relic of old times when nfpcore was a library module. All the nfp_cpp "caches" are awkward to deal with because of concurrency and prone to keeping stale information. Make the run time symbol table be an object read out from the device and managed by whoever requested it. Since the driver loads FW at ->probe() and never reloads, we can hold onto the table for ever. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>