summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2019-01-15ice: Implement getting and setting ethtool coalesceBrett Creeley
This patch includes the following ethtool operations: 1. get_coalesce 2. set_coalesce 3. get_per_q_coalesce 4. set_per_q_coalesce Each ITR value (current_itr/target_itr) are stored on a per ice_ring_container basis. This is because each valid ice_ring_container can have 1 or more rings that are tied to the same q_vector ITR index. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-15ice: Add support for adaptive interrupt moderationBrett Creeley
Currently the driver does not support adaptive/dynamic interrupt moderation. This patch adds support for this. Also, adaptive/dynamic interrupt moderation is turned on by default upon driver load. In order to support adaptive interrupt moderation, two functions were added, ice_update_itr() and ice_itr_divisor(). These are used to determine the current packet load and to determine a divisor based on link speed respectively. This patch also adds the ICE_ITR_GRAN_S define that is used in the hot-path when setting a new ITR value. The shift is used to pet two birds with one hand, set the ITR value while re-enabling the interrupt. Also, the ICE_ITR_GRAN_S is defined as 1 because the device has a ITR granularity of 2usecs. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-15ice: Move aggregator list into ice_hw instanceAnirudh Venkataramanan
The aggregator list needs to be preserved for use after a reset. This patch moves it out of the port_info instance and into the ice_hw instance. Signed-off-by: Tarun Singh <tarun.k.singh@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-15ice: Rework queue management code for reuseAnirudh Venkataramanan
This patch reworks the queue management code to allow for reuse with the XDP feature (to be added in a future patch). Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-15ice: Add ethtool private flag to make forcing link down optionalBruce Allan
Add new infrastructure for implementing ethtool private flags using the existing pf->flags bitmap to store them, and add the link-down-on-close ethtool private flag to optionally bring down the PHY link when the interface is administratively downed. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-15ice: Set physical link up/down when an interface is set up/downBrett Creeley
When a netdev is set up/down we need to set the phsyical link state accordingly. This patch adds that functionality by calling ice_force_phys_link_state(vsi, link_up) in both the ice_stop() and ice_open() paths. In order to force link, ice_force_phys_link_state(vsi, link_up) will first determine the current phy capabilities. If link has not changed there is nothing to do. If link has changed, previous PHY capabilities are saved and the "Enable Automatic Link Update" and "Link Establishment State Machine (LESM)" enable bits are set. Then the new PHY config is saved. The "Enable Automatic Link Update" will force the FW to execute Setup link and restart auto-negotiation. This *should* then result in a "Link Status Event (LSE)" which will cause the driver to get the current link status. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-15ice: Implement support for normal get_eeprom[_len] ethtool opsBruce Allan
Add support for get_eeprom and get_eeprom_len ethtool ops Specification states that PF software accesses NVM (shadow-ram) via AQ commands (e.g. NVM Read, NVM Write) in the range 0x000000-0x00FFFF (64KB), so the get_eeprom_len op should return 64KB. If additional regions of the 16MB NVM must be read, another access method must be used. The ethtool kernel code, by default, will ask for multiple page-size hunks of the NVM not to exceed the value returned by ice_get_eeprom_len(). ice_read_sr_buf() deals with arch page sizes different than 4KB. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-15ice: Add ethtool set_phys_id handlerAnirudh Venkataramanan
Add led blinking handler to ethtool. Since led blinking is controlled by FW/HW only ETHTOOL_ID_ACTIVE and ETHTOOL_ID_INACTIVE are really needed. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-15ice: Configure RSS LUT and HASH KEY in rebuild pathMd Fahad Iqbal Polash
This patch configures the RSS lookup table and hash key post reset. Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-15ice: Refactor a few Tx scheduler functionsAnirudh Venkataramanan
The following functions were refactored to call a new common function, ice_aqc_send_sched_elem_cmd(): - ice_aq_add_sched_elems() - ice_aq_delete_sched_elems() - ice_aq_move_sched_elems() - ice_aq_query_sched_elems() - ice_aq_cfg_sched_elems() - ice_aq_suspend_sched_elems() - ice_aq_resume_sched_elems() Signed-off-by: Greg Priest <greg.priest@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur Gautier. 2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei. 3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano Brivio. 4) Use after free in hns driver, from Yonglong Liu. 5) icmp6_send() needs to handle the case of NULL skb, from Eric Dumazet. 6) Missing rcu read lock in __inet6_bind() when operating on mapped addresses, from David Ahern. 7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva. 8) Fix PHY vs r8169 module loading ordering issues, from Heiner Kallweit. 9) Fix bridge vlan memory leak, from Ido Schimmel. 10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe. 11) Infoleak in ipv6_local_error(), flow label isn't completely initialized. From Eric Dumazet. 12) Handle mv88e6390 errata, from Andrew Lunn. 13) Making vhost/vsock CID hashing consistent, from Zha Bin. 14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo. 15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) bnxt_en: Fix context memory allocation. bnxt_en: Fix ring checking logic on 57500 chips. mISDN: hfcsusb: Use struct_size() in kzalloc() net: clear skb->tstamp in bridge forwarding path net: bpfilter: disallow to remove bpfilter module while being used net: bpfilter: restart bpfilter_umh when error occurred net: bpfilter: use cleanup callback to release umh_info umh: add exit routine for UMH process isdn: i4l: isdn_tty: Fix some concurrency double-free bugs vhost/vsock: fix vhost vsock cid hashing inconsistent net: stmmac: Prevent RX starvation in stmmac_napi_poll() net: stmmac: Fix the logic of checking if RX Watchdog must be enabled net: stmmac: Check if CBS is supported before configuring net: stmmac: dwxgmac2: Only clear interrupts that are active net: stmmac: Fix PCI module removal leak tools/bpf: fix bpftool map dump with bitfields tools/bpf: test btf bitfield with >=256 struct member offset bpf: fix bpffs bitfield pretty print net: ethernet: mediatek: fix warning in phy_start_aneg tcp: change txhash on SYN-data timeout ...
2019-01-15ice: Fix unused variable build warningBruce Allan
Commit 2fd527b72bb6 ("net: ndo_bridge_setlink: Add extack") added a new parameter "extack" to ice_bridge_setlink but this parameter isn't used by the function. This results in a warning: unused parameter ‘extack’ [-Wunused-parameter]. Fix that by adding an "__always_unused" qualifier. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-12bnxt_en: Fix context memory allocation.Michael Chan
When allocating memory pages for context memory, if the last page table should be fully populated, the current code will set nr_pages to 0 when calling bnxt_alloc_ctx_mem_blk(). This will cause the last page table to be completely blank and causing some RDMA failures. Fix it by setting the last page table's nr_pages to the remainder only if it is non-zero. Fixes: 08fe9d181606 ("bnxt_en: Add Level 2 context memory paging support.") Reported-by: Eric Davis <eric.davis@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-12bnxt_en: Fix ring checking logic on 57500 chips.Michael Chan
In bnxt_hwrm_check_pf_rings(), add the proper flag to test the NQ resources. Without the proper flag, the firmware will change the NQ resource allocation and remap the IRQ, causing missing IRQs. This issue shows up when adding MQPRIO TX queues, for example. Fixes: 36d65be9a880 ("bnxt_en: Disable MSIX before re-reserving NQs/CMPL rings.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: stmmac: Prevent RX starvation in stmmac_napi_poll()Jose Abreu
Currently, TX is given a budget which is consumed by stmmac_tx_clean() and stmmac_rx() is given the remaining non-consumed budget. This is wrong and in case we are sending a large number of packets this can starve RX because remaining budget will be low. Let's give always the same budget for RX and TX clean. While at it, check if we missed any interrupts while we were in NAPI callback by looking at DMA interrupt status. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: stmmac: Fix the logic of checking if RX Watchdog must be enabledJose Abreu
RX Watchdog can be disabled by platform definitions but currently we are initializing the descriptors before checking if Watchdog must be disabled or not. Fix this by checking earlier if user wants Watchdog disabled or not. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: stmmac: Check if CBS is supported before configuringJose Abreu
Check if CBS is currently supported before trying to configure it in HW. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: stmmac: dwxgmac2: Only clear interrupts that are activeJose Abreu
In DMA interrupt handler we were clearing all interrupts status, even the ones that were not active. Fix this and only clear the active interrupts. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: stmmac: Fix PCI module removal leakJose Abreu
Since commit b7d0f08e9129, the enable / disable of PCI device is not managed which will result in IO regions not being automatically unmapped. As regions continue mapped it is currently not possible to remove and then probe again the PCI module of stmmac. Fix this by manually unmapping regions on remove callback. Changes from v1: - Fix build error Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Fixes: b7d0f08e9129 ("net: stmmac: Fix WoL for PCI-based setups") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-10net: ethernet: mediatek: fix warning in phy_start_anegHeiner Kallweit
linux 5.0-rc1 shows following warning on bpi-r2/mt7623 bootup: [ 5.170597] WARNING: CPU: 3 PID: 1 at drivers/net/phy/phy.c:548 phy_start_aneg+0x110/0x144 [ 5.178826] called from state READY .... [ 5.264111] [<c0629fd4>] (phy_start_aneg) from [<c0e3e720>] (mtk_init+0x414/0x47c) [ 5.271630] r7:df5f5eec r6:c0f08c48 r5:00000000 r4:dea67800 [ 5.277256] [<c0e3e30c>] (mtk_init) from [<c07dabbc>] (register_netdevice+0x98/0x51c) [ 5.285035] r8:00000000 r7:00000000 r6:c0f97080 r5:c0f08c48 r4:dea67800 [ 5.291693] [<c07dab24>] (register_netdevice) from [<c07db06c>] (register_netdev+0x2c/0x44) [ 5.299989] r8:00000000 r7:dea2e608 r6:deacea00 r5:dea2e604 r4:dea67800 [ 5.306646] [<c07db040>] (register_netdev) from [<c06326d8>] (mtk_probe+0x668/0x7ac) [ 5.314336] r5:dea2e604 r4:dea2e040 [ 5.317890] [<c0632070>] (mtk_probe) from [<c05a78fc>] (platform_drv_probe+0x58/0xa8) [ 5.325670] r10:c0f86bac r9:00000000 r8:c0fbe578 r7:00000000 r6:c0f86bac r5:00000000 [ 5.333445] r4:deacea10 [ 5.335963] [<c05a78a4>] (platform_drv_probe) from [<c05a5248>] (really_probe+0x2d8/0x424) maybe other boards using this generic driver are affected v2: optimization: - phy_set_max_speed() is only needed if you want to reduce the max speed, typically if the PHY supports 1Gbps but the MAC supports 100Mbps only. - The pause parameters are autonegotiated. Except you have a specific need you normally don't need to manually fiddle with this. - phy_start_aneg() is called implicitly by the phylib state machine, you shouldn't call it manually except you have a good excuse. - netif_carrier_on/netif_carrier_off in mtk_phy_link_adjust() isn't needed. It's done by phy_link_change() in phylib. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Sean Wang <sean.wang@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-10net: dsa: mv88x6xxx: mv88e6390 errataAndrew Lunn
The 6390 copper ports have an errata which require poking magic values into undocumented magic registers and then performing a software reset. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-10bonding: update nest level on unlinkWillem de Bruijn
A network device stack with multiple layers of bonding devices can trigger a false positive lockdep warning. Adding lockdep nest levels fixes this. Update the level on both enslave and unlink, to avoid the following series of events .. ip netns add test ip netns exec test bash ip link set dev lo addr 00:11:22:33:44:55 ip link set dev lo down ip link add dev bond1 type bond ip link add dev bond2 type bond ip link set dev lo master bond1 ip link set dev bond1 master bond2 ip link set dev bond1 nomaster ip link set dev bond2 master bond1 .. from still generating a splat: [ 193.652127] ====================================================== [ 193.658231] WARNING: possible circular locking dependency detected [ 193.664350] 4.20.0 #8 Not tainted [ 193.668310] ------------------------------------------------------ [ 193.674417] ip/15577 is trying to acquire lock: [ 193.678897] 00000000a40e3b69 (&(&bond->stats_lock)->rlock#3/3){+.+.}, at: bond_get_stats+0x58/0x290 [ 193.687851] but task is already holding lock: [ 193.693625] 00000000807b9d9f (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0x58/0x290 [..] [ 193.851092] lock_acquire+0xa7/0x190 [ 193.855138] _raw_spin_lock_nested+0x2d/0x40 [ 193.859878] bond_get_stats+0x58/0x290 [ 193.864093] dev_get_stats+0x5a/0xc0 [ 193.868140] bond_get_stats+0x105/0x290 [ 193.872444] dev_get_stats+0x5a/0xc0 [ 193.876493] rtnl_fill_stats+0x40/0x130 [ 193.880797] rtnl_fill_ifinfo+0x6c5/0xdc0 [ 193.885271] rtmsg_ifinfo_build_skb+0x86/0xe0 [ 193.890091] rtnetlink_event+0x5b/0xa0 [ 193.894320] raw_notifier_call_chain+0x43/0x60 [ 193.899225] netdev_change_features+0x50/0xa0 [ 193.904044] bond_compute_features.isra.46+0x1ab/0x270 [ 193.909640] bond_enslave+0x141d/0x15b0 [ 193.913946] do_set_master+0x89/0xa0 [ 193.918016] do_setlink+0x37c/0xda0 [ 193.921980] __rtnl_newlink+0x499/0x890 [ 193.926281] rtnl_newlink+0x48/0x70 [ 193.930238] rtnetlink_rcv_msg+0x171/0x4b0 [ 193.934801] netlink_rcv_skb+0xd1/0x110 [ 193.939103] rtnetlink_rcv+0x15/0x20 [ 193.943151] netlink_unicast+0x3b5/0x520 [ 193.947544] netlink_sendmsg+0x2fd/0x3f0 [ 193.951942] sock_sendmsg+0x38/0x50 [ 193.955899] ___sys_sendmsg+0x2ba/0x2d0 [ 193.960205] __x64_sys_sendmsg+0xad/0x100 [ 193.964687] do_syscall_64+0x5a/0x460 [ 193.968823] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 7e2556e40026 ("bonding: avoid lockdep confusion in bond_get_stats()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-10net: cxgb4: fix various indentation issuesColin Ian King
There are some lines that have indentation issues, fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-10net: cxgb3: fix various indentation issuesColin Ian King
There are handful of lines that have indentation issues, fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-10tun: publish tfile after it's fully initializedStanislav Fomichev
BUG: unable to handle kernel NULL pointer dereference at 00000000000000d1 Call Trace: ? napi_gro_frags+0xa7/0x2c0 tun_get_user+0xb50/0xf20 tun_chr_write_iter+0x53/0x70 new_sync_write+0xff/0x160 vfs_write+0x191/0x1e0 __x64_sys_write+0x5e/0xd0 do_syscall_64+0x47/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 I think there is a subtle race between sending a packet via tap and attaching it: CPU0: CPU1: tun_chr_ioctl(TUNSETIFF) tun_set_iff tun_attach rcu_assign_pointer(tfile->tun, tun); tun_fops->write_iter() tun_chr_write_iter tun_napi_alloc_frags napi_get_frags napi->skb = napi_alloc_skb tun_napi_init netif_napi_add napi->skb = NULL napi->skb is NULL here napi_gro_frags napi_frags_skb skb = napi->skb skb_reset_mac_header(skb) panic() Move rcu_assign_pointer(tfile->tun) and rcu_assign_pointer(tun->tfiles) to be the last thing we do in tun_attach(); this should guarantee that when we call tun_get() we always get an initialized object. v2 changes: * remove extra napi_mutex locks/unlocks for napi operations Reported-by: syzbot <syzkaller@googlegroups.com> Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08mlxsw: spectrum_switchdev: Set PVID correctly during VLAN deletionIdo Schimmel
When a VLAN is deleted from a bridge port we should not change the PVID unless the deleted VLAN is the PVID. Fixes: fe9ccc785de5 ("mlxsw: spectrum_switchdev: Don't batch VLAN operations") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08mlxsw: spectrum_nve: Replace error code with EINVALIdo Schimmel
Adding a VLAN on a port can trigger the offload of a VXLAN tunnel which is already a member in the VLAN. In case the configuration of the VXLAN is not supported, the driver would return -EOPNOTSUPP. This is problematic since bridge code does not interpret this as error, but rather that it should try to setup the VLAN using the 8021q driver instead of switchdev. Fixes: d70e42b22dd4 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08mlxsw: spectrum_switchdev: Avoid returning errors in commit phaseIdo Schimmel
Drivers are not supposed to return errors in switchdev commit phase if they returned OK in prepare phase. Otherwise, a WARNING is emitted. However, when the offloading of a VXLAN tunnel is triggered by the addition of a VLAN on a local port, it is not possible to guarantee that the commit phase will succeed without doing a lot of work. In these cases, the artificial division between prepare and commit phase does not make sense, so simply do the work in the prepare phase. Fixes: d70e42b22dd4 ("mlxsw: spectrum: Enable VxLAN enslavement to VLAN-aware bridges") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08mlxsw: spectrum: Add VXLAN dependency for spectrumIdo Schimmel
When VXLAN is a loadable module, MLXSW_SPECTRUM must not be built-in: drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c:2547: undefined reference to `vxlan_fdb_find_uc' Add Kconfig dependency to enforce usable configurations. Fixes: 1231e04f5bba ("mlxsw: spectrum_switchdev: Add support for VxLAN encapsulation") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08mlxsw: spectrum: Disable lag port TX before removing itJiri Pirko
Make sure that lag port TX is disabled before mlxsw_sp_port_lag_leave() is called and prevent from possible EMAD error. Fixes: 0d65fc13042f ("mlxsw: spectrum: Implement LAG port join/leave") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08mlxsw: spectrum_acl: Remove ASSERT_RTNL()s in module removal flowNir Dotan
Removal of the mlxsw driver on Spectrum-2 platforms hits an ASSERT_RTNL() in Spectrum-2 ACL Bloom filter and in ERP removal paths. This happens because the multicast router implementation in Spectrum-2 relies on ACLs. Taking the RTNL lock upon driver removal is useless since the driver first removes its ports and unregisters from notifiers so concurrent writes cannot happen at that time. The assertions were originally put as a reminder for future work involving ERP background optimization, but having these assertions only during addition serves this purpose as well. Therefore remove the ASSERT_RTNL() in both places related to ERP and Bloom filter removal. Fixes: cf7221a4f5a5 ("mlxsw: spectrum_router: Add Multicast routing support for Spectrum-2") Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08mlxsw: spectrum_acl: Add cleanup after C-TCAM update error conditionNir Dotan
When writing to C-TCAM, mlxsw driver uses cregion->ops->entry_insert(). In case of C-TCAM HW insertion error, the opposite action should take place. Add error handling case in which the C-TCAM region entry is removed, by calling cregion->ops->entry_remove(). Fixes: a0a777b9409f ("mlxsw: spectrum_acl: Start using A-TCAM") Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08r8169: load Realtek PHY driver module before r8169Heiner Kallweit
This soft dependency works around an issue where sometimes the genphy driver is used instead of the dedicated PHY driver. The root cause of the issue isn't clear yet. People reported the unloading/re-loading module r8169 helps, and also configuring this soft dependency in the modprobe config files. Important just seems to be that the realtek module is loaded before r8169. Once this has been applied preliminary fix 38af4b903210 ("net: phy: add workaround for issue where PHY driver doesn't bind to the device") will be removed. Fixes: f1e911d5d0df ("r8169: add basic phylib support") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08lan743x: Remove phy_read from link status change functionBryan Whitehead
It has been noticed that some phys do not have the registers required by the previous implementation. To fix this, instead of using phy_read, the required information is extracted from the phy_device structure. fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08cross-tree: phase out dma_zalloc_coherent() on headersLuis Chamberlain
The last few stragglers coccinelle doesn't pick up are on driver specific header files. Phase those out as well as dma_alloc_coherent() zeroes out the memory as well now too. Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-07cdc_ether: trivial whitespace readability fixBjørn Mork
This function is unreadable enough without indenting mismatches and unnecessary line breaks. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-07r8169: don't try to read counters if chip is in a PCI power-save stateHeiner Kallweit
Avoid log spam caused by trying to read counters from the chip whilst it is in a PCI power-save state. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=107421 Fixes: 1ef7286e7f36 ("r8169: Dereference MMIO address immediately before use") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-07net/mlx4: replace pci_{,un}map_sg with dma_{,un}map_sgStephen Warren
pci_{,un}map_sg are deprecated and replaced by dma_{,un}map_sg. This is especially relevant since the rest of the driver uses the DMA API. Fix the driver to use the replacement APIs. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-07net/mlx4: Get rid of page operation after dma_alloc_coherentStephen Warren
This patch solves a crash at the time of mlx4 driver unload or system shutdown. The crash occurs because dma_alloc_coherent() returns one value in mlx4_alloc_icm_coherent(), but a different value is passed to dma_free_coherent() in mlx4_free_icm_coherent(). In turn this is because when allocated, that pointer is passed to sg_set_buf() to record it, then when freed it is re-calculated by calling lowmem_page_address(sg_page()) which returns a different value. Solve this by recording the value that dma_alloc_coherent() returns, and passing this to dma_free_coherent(). This patch is roughly equivalent to commit 378efe798ecf ("RDMA/hns: Get rid of page operation after dma_alloc_coherent"). Based-on-code-from: Christoph Hellwig <hch@lst.de> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04ixgbe: fix Kconfig when driver is not a moduleJeff Kirsher
The new ability added to the driver to use mii_bus to handle MII related ioctls is causing compile issues when the driver is compiled into the kernel (i.e. not a module). The problem was in selecting MDIO_DEVICE instead of the preferred PHYLIB Kconfig option. The reason being that MDIO_DEVICE had a dependency on PHYLIB and would be compiled as a module when PHYLIB was a module, no matter whether ixgbe was compiled into the kernel. CC: Dave Jones <davej@codemonkey.org.uk> CC: Steve Douthit <stephend@silicom-usa.com> CC: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Reviewed-by: Stephen Douthit <stephend@silicom-usa.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04qmi_wwan: add MTU default to qmap network interfaceDaniele Palmas
This patch adds MTU default value to qmap network interface in order to avoid "RTNETLINK answers: No buffer space available" error when setting an ipv6 address. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04net: hns: Fix use after free identified by SLUB debugYonglong Liu
When enable SLUB debug, than remove hns_enet_drv module, SLUB debug will identify a use after free bug: [134.189505] Unable to handle kernel paging request at virtual address 006b6b6b6b6b6b6b [134.197553] Mem abort info: [134.200381] ESR = 0x96000004 [134.203487] Exception class = DABT (current EL), IL = 32 bits [134.209497] SET = 0, FnV = 0 [134.212596] EA = 0, S1PTW = 0 [134.215777] Data abort info: [134.218701] ISV = 0, ISS = 0x00000004 [134.222596] CM = 0, WnR = 0 [134.225606] [006b6b6b6b6b6b6b] address between user and kernel address ranges [134.232851] Internal error: Oops: 96000004 [#1] SMP [134.237798] CPU: 21 PID: 27834 Comm: rmmod Kdump: loaded Tainted: G OE 4.19.5-1.2.34.aarch64 #1 [134.247856] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.58 10/24/2018 [134.255181] pstate: 20000005 (nzCv daif -PAN -UAO) [134.260044] pc : hns_ae_put_handle+0x38/0x60 [134.264372] lr : hns_ae_put_handle+0x24/0x60 [134.268700] sp : ffff00001be93c50 [134.272054] x29: ffff00001be93c50 x28: ffff802faaec8040 [134.277442] x27: 0000000000000000 x26: 0000000000000000 [134.282830] x25: 0000000056000000 x24: 0000000000000015 [134.288284] x23: ffff0000096fe098 x22: ffff000001050070 [134.293671] x21: ffff801fb3c044a0 x20: ffff80afb75ec098 [134.303287] x19: ffff80afb75ec098 x18: 0000000000000000 [134.312945] x17: 0000000000000000 x16: 0000000000000000 [134.322517] x15: 0000000000000002 x14: 0000000000000000 [134.332030] x13: dead000000000100 x12: ffff7e02bea3c988 [134.341487] x11: ffff80affbee9e68 x10: 0000000000000000 [134.351033] x9 : 6fffff8000008101 x8 : 0000000000000000 [134.360569] x7 : dead000000000100 x6 : ffff000009579748 [134.370059] x5 : 0000000000210d00 x4 : 0000000000000000 [134.379550] x3 : 0000000000000001 x2 : 0000000000000000 [134.388813] x1 : 6b6b6b6b6b6b6b6b x0 : 0000000000000000 [134.397993] Process rmmod (pid: 27834, stack limit = 0x00000000d474b7fd) [134.408498] Call trace: [134.414611] hns_ae_put_handle+0x38/0x60 [134.422208] hnae_put_handle+0xd4/0x108 [134.429563] hns_nic_dev_remove+0x60/0xc0 [hns_enet_drv] [134.438342] platform_drv_remove+0x2c/0x70 [134.445958] device_release_driver_internal+0x174/0x208 [134.454810] driver_detach+0x70/0xd8 [134.461913] bus_remove_driver+0x64/0xe8 [134.469396] driver_unregister+0x34/0x60 [134.476822] platform_driver_unregister+0x20/0x30 [134.485130] hns_nic_dev_driver_exit+0x14/0x6e4 [hns_enet_drv] [134.494634] __arm64_sys_delete_module+0x238/0x290 struct hnae_handle is a member of struct hnae_vf_cb, so when vf_cb is freed, than use hnae_handle will cause use after free panic. This patch frees vf_cb after hnae_handle used. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04net: hns: Fix WARNING when hns modules installedYonglong Liu
Commit 308c6cafde01 ("net: hns: All ports can not work when insmod hns ko after rmmod.") add phy_stop in hns_nic_init_phy(), In the branch of "net", this method is effective, but in the branch of "net-next", it will cause a WARNING when hns modules loaded, reference to commit 2b3e88ea6528 ("net: phy: improve phy state checking"): [10.092168] ------------[ cut here ]------------ [10.092171] called from state READY [10.092189] WARNING: CPU: 4 PID: 1 at ../drivers/net/phy/phy.c:854 phy_stop+0x90/0xb0 [10.092192] Modules linked in: [10.092197] CPU: 4 PID:1 Comm:swapper/0 Not tainted 4.20.0-rc7-next-20181220 #1 [10.092200] Hardware name: Huawei TaiShan 2280 /D05, BIOS Hisilicon D05 UEFI 16.12 Release 05/15/2017 [10.092202] pstate: 60000005 (nZCv daif -PAN -UAO) [10.092205] pc : phy_stop+0x90/0xb0 [10.092208] lr : phy_stop+0x90/0xb0 [10.092209] sp : ffff00001159ba90 [10.092212] x29: ffff00001159ba90 x28: 0000000000000007 [10.092215] x27: ffff000011180068 x26: ffff0000110a5620 [10.092218] x25: ffff0000113b6000 x24: ffff842f96dac000 [10.092221] x23: 0000000000000000 x22: 0000000000000000 [10.092223] x21: ffff841fb8425e18 x20: ffff801fb3a56438 [10.092226] x19: ffff801fb3a56000 x18: ffffffffffffffff [10.092228] x17: 0000000000000000 x16: 0000000000000000 [10.092231] x15: ffff00001122d6c8 x14: ffff00009159b7b7 [10.092234] x13: ffff00001159b7c5 x12: ffff000011245000 [10.092236] x11: 0000000005f5e0ff x10: ffff00001159b750 [10.092239] x9 : 00000000ffffffd0 x8 : 0000000000000465 [10.092242] x7 : ffff0000112457f8 x6 : ffff0000113bd7ce [10.092245] x5 : 0000000000000000 x4 : 0000000000000000 [10.092247] x3 : 00000000ffffffff x2 : ffff000011245828 [10.092250] x1 : 4b5860bd05871300 x0 : 0000000000000000 [10.092253] Call trace: [10.092255] phy_stop+0x90/0xb0 [10.092260] hns_nic_init_phy+0xf8/0x110 [10.092262] hns_nic_try_get_ae+0x4c/0x3b0 [10.092264] hns_nic_dev_probe+0x1fc/0x480 [10.092268] platform_drv_probe+0x50/0xa0 [10.092271] really_probe+0x1f4/0x298 [10.092273] driver_probe_device+0x58/0x108 [10.092275] __driver_attach+0xdc/0xe0 [10.092278] bus_for_each_dev+0x74/0xc8 [10.092280] driver_attach+0x20/0x28 [10.092283] bus_add_driver+0x1b8/0x228 [10.092285] driver_register+0x60/0x110 [10.092288] __platform_driver_register+0x40/0x48 [10.092292] hns_nic_dev_driver_init+0x18/0x20 [10.092296] do_one_initcall+0x5c/0x180 [10.092299] kernel_init_freeable+0x198/0x240 [10.092303] kernel_init+0x10/0x108 [10.092306] ret_from_fork+0x10/0x18 [10.092308] ---[ end trace 1396dd0278e397eb ]--- This WARNING occurred because of calling phy_stop before phy_start. The root cause of the problem in commit '308c6cafde01' is: Reference to hns_nic_init_phy, the flag phydev->supported is changed after phy_connect_direct. The flag phydev->supported is 0x6ff when hns modules is loaded, so will not change Fiber Port power(Reference to marvell.c), which is power on at default. Then the flag phydev->supported is changed to 0x6f, so Fiber Port power is off when removing hns modules. When hns modules installed again, the flag phydev->supported is default value 0x6ff, so will not change Fiber Port power(now is off), causing mac link not up problem. So the solution is change phy flags before phy_connect_direct. Fixes: 308c6cafde01 ("net: hns: All ports can not work when insmod hns ko after rmmod.") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04net: dsa: mt7530: Drop unused GPIO includeLinus Walleij
This driver uses GPIO descriptors only, <linux/of_gpio.h> is not used so drop the include. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04net: macb: remove unnecessary codeClaudiu Beznea
Commit 653e92a9175e ("net: macb: add support for padding and fcs computation") introduced a bug fixed by commit 899ecaedd155 ("net: ethernet: cadence: fix socket buffer corruption problem"). Code removed in this patch is not reachable at all so remove it. Fixes: 653e92a9175e ("net: macb: add support for padding and fcs computation") Cc: Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04net: dsa: microchip: Drop unused GPIO includesLinus Walleij
This driver does not use the old GPIO includes so drop them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04qed: Fix qed_ll2_post_rx_buffer_notify_fw() by adding a write memory barrierDenis Bolotin
Make sure chain element is updated before ringing the doorbell. Signed-off-by: Denis Bolotin <dbolotin@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04soc/fsl/qe: fix err handling of ucc_of_parse_tdmWen Yang
Currently there are some issues with the ucc_of_parse_tdm function: 1, a possible null pointer dereference in ucc_of_parse_tdm, detected by the semantic patch deref_null.cocci, with the following warning: drivers/soc/fsl/qe/qe_tdm.c:177:21-24: ERROR: pdev is NULL but dereferenced. 2, dev gets modified, so in any case that devm_iounmap() will fail even when the new pdev is valid, because the iomap was done with a different pdev. 3, there is no driver bind with the "fsl,t1040-qe-si" or "fsl,t1040-qe-siram" device. So allocating resources using devm_*() with these devices won't provide a cleanup path for these resources when the caller fails. This patch fixes them. Suggested-by: Li Yang <leoyang.li@nxp.com> Suggested-by: Christophe LEROY <christophe.leroy@c-s.fr> Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Reviewed-by: Peng Hao <peng.hao2@zte.com.cn> CC: Julia Lawall <julia.lawall@lip6.fr> CC: Zhao Qiang <qiang.zhao@nxp.com> CC: David S. Miller <davem@davemloft.net> CC: netdev@vger.kernel.org CC: linuxppc-dev@lists.ozlabs.org CC: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04r8169: Add support for new Realtek EthernetKai-Heng Feng
There are two new Realtek Ethernet devices which are re-branded r8168h. Add the IDs to to support them. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-06 11:30:55 +0000