summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2019-01-24enetc: Add vf to pf messaging supportClaudiu Manoil
VSIs (VFs) may send a message to the PSI (PF) for general notification or to gain access to hardware resources which requires host inspection. These messages may vary in size and are handled as a partition copy between two memory regions owned by the respective participants. The PSI will respond with fail or success and a 16-bit message code. The patch implements the vf to pf messaging mechanism above and, as the first application making use of this support, it enables the VF to configure its own primary MAC address. Signed-off-by: Catalin Horghidan <catalin.horghidan@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24enetc: Add ethtool statisticsClaudiu Manoil
This adds most h/w statistics counters: non-privileged SI conters, as well as privileged Port and MAC counters available only to the PF. Per ring software stats are also included. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24enetc: Introduce basic PF and VF ENETC ethernet driversClaudiu Manoil
ENETC is a multi-port virtualized Ethernet controller supporting GbE designs and Time-Sensitive Networking (TSN) functionality. ENETC is operating as an SR-IOV multi-PF capable Root Complex Integrated Endpoint (RCIE). As such, it contains multiple physical (PF) and virtual (VF) PCIe functions, discoverable by standard PCI Express. Introduce basic PF and VF ENETC ethernet drivers. The PF has access to the ENETC Port registers and resources and makes the required privileged configurations for the underlying VF devices. Common functionality is controlled through so called System Interface (SI) register blocks, PFs and VFs own a SI each. Though SI register blocks are almost identical, there are a few privileged SI level controls that are accessible only to PFs, and so the distinction is made between PF SIs (PSI) and VF SIs (VSI). As such, the bulk of the code, including datapath processing, basic h/w offload support and generic pci related configuration, is shared between the 2 drivers and is factored out in common source files (i.e. enetc.c). Major functionalities included (for both drivers): MSI-X support for Rx and Tx processing, assignment of Rx/Tx BD ring pairs to MSI-X entries, multi-queue support, Rx S/G (Rx frame fragmentation) and jumbo frame (up to 9600B) support, Rx paged allocation and reuse, Tx S/G support (NETIF_F_SG), Rx and Tx checksum offload, PF MAC filtering and initial control ring support, VLAN extraction/ insertion, PF Rx VLAN CTAG filtering, VF mac address config support, VF VLAN isolation support, etc. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24net/mlx4_core: A write memory barrier is sufficient in EQ ci updateTariq Toukan
Soften the memory barrier call of mb() by a sufficient wmb() in the consumer index update of the event queues. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23r8169: improve firmware handlingHeiner Kallweit
So far member rtl_fw has three states: - IS_ERR(rtl_fw): firmware not loaded - !rtl_fw: no firmware available - other: firmware loaded This can be made simpler and clearer by adding the firmware name as member fw_name to struct rtl8169_private. Then: - !fw_name: no firmware available - !rtl_fw: firmware not loaded - rtl_fw: firmware loaded This change also allows to easily merge rtl_request_uncached_firmware into rtl_request_firmware. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23net: hns3: fix PFC not setting problem for DCB moduleYunsheng Lin
The PFC enabling is based on user priority, currently it is based on TC, which may cause PFC not setting correctly when pri to TC mapping is not one to one relation. This patch adds pfc_en in tm_info to fix it. Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23net: hns3: add statistics for PFC frames and MAC control framesliuzhongzhu
In the old firmware version, statistics acquisition of PFC frames and MAC control frames is not supported. Add command retrieves statistics for PFC frames and MAC control frames from the firmware. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23net: hns3: add ETS TC weight setting in SSU moduleYunsheng Lin
This patch sets the TC weight in SSU module according to info in tm_info. Also, zero weight of TC weight in SSU ETS module means enabling strict priority, so do not allow zero weight when in ETS mode. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23net: hns3: do not return GE PFC setting err when initializingYunsheng Lin
GE MAC does not support PFC, when driver is initializing and MAC is in GE Mode, ignore the fw not supported error, otherwise initialization will fail. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23net: hns3: Change fw error code NOT_EXEC to NOT_SUPPORTEDYunsheng Lin
According to firmware error code definition, the error code of 2 means NOT_SUPPORTED, this patch changes it to NOT_SUPPORTED. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23net: hns3: clear param in ring when free ringPeng Li
Param pending_buf and skb may be not NULL when free ring. This patch clears them when free ring. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23net: hns3: fix bug of ethtool_ops.get_channels for VFHuazhong Tan
The current code returns the number of all queues that can be used and the number of queues that have been allocated, which is incorrect. What should be returned is the number of queues allocated for each enabled TC and the number of queues that can be allocated. This patch fixes it. Fixes: 849e46077689 ("net: hns3: add ethtool_ops.get_channels support for VF") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23net: hns3: fix for shaper not setting when TC num changesYunsheng Lin
Shaper setting does not change currently, when TC num changes, which may cause shaper parameter not setting problem. This patch fixes it by setting the shaper parameter when TC num changes. Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23net: hns3: fix rss configuration lost problem when setting channelYunsheng Lin
Currently rss configuration set by user will be lost when setting channel. This patch fixes it by not setting rss configuration to default if user has configured the rss. Fixes: 09f2af6405b8 ("net: hns3: add support to modify tqps number") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23net: hns3: refactor the statistics updating for netdevJian Shen
In origin codes, there are some statistics item are got from mac, which also include the packets statistics of VF. It is unreasonable. This patch fixes it by counting them in the rx/tx processing flow. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23net: hns3: add rx multicast packets statisticJian Shen
This patch adds rx multicast packets statistic for each ring. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23net: hns3: add calling roce callback function when link status changePeng Li
This patch adds calling roce callback function when link status change. Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23mlxsw: spectrum_nve: Enable VXLAN on Spectrum-2Ido Schimmel
Enable VXLAN on Spectrum-2 as previous patches added the required functionality. Note that for now Spectrum-1 and Spectrum-2 use the same function to determine whether the VXLAN configuration is valid or not. In the future, when the driver will be extended to support features not present in Spectrum-1, two different functions will be needed. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23mlxsw: spectrum_nve: Add support for VXLAN on Spectrum-2Ido Schimmel
Spectrum-1 and Spectrum-2 are largely backward compatible with regards to VXLAN. One difference - as explained in previous patch - is that an underlay RIF needs to be specified instead of an underlay VR during NVE initialization. This is accomplished by calling the relevant function that returns the index of such a RIF based on the table ID (RT_TABLE_MAIN) where underlay look up occurs. The second difference is that VXLAN learning (snooping) is controlled via a different register (TNPC). Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23mlxsw: spectrum_nve: Breakout common code to a common functionIdo Schimmel
The configuration of a VXLAN tunnel in Spectrum-1 and Spectrum-2 is largely the same. To avoid code duplication, breakout the common parts to a common function that can be invoked from the ASIC-specific code. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23mlxsw: spectrum: Expose functions to create and destroy underlay RIFIdo Schimmel
In Spectrum-2, instead of providing the ID of the virtual router (VR) where NVE underlay lookups will occur as in Spectrum-1, the ID of a router interface (RIF) in this VR is required. Expose functions to create and destroy such a RIF. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23net/mlx4: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/mellanox/mlx4/eq.c: In function ‘mlx4_eq_int’: drivers/net/ethernet/mellanox/mlx4/mlx4.h:219:5: warning: this statement may fall through [-Wimplicit-fallthrough=] if (mlx4_debug_level) \ ^ drivers/net/ethernet/mellanox/mlx4/eq.c:558:4: note: in expansion of macro ‘mlx4_dbg’ mlx4_dbg(dev, "%s: MLX4_EVENT_TYPE_SRQ_LIMIT. srq_no=0x%x, eq 0x%x\n", ^~~~~~~~ drivers/net/ethernet/mellanox/mlx4/eq.c:561:3: note: here case MLX4_EVENT_TYPE_SRQ_CATAS_ERROR: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23qed: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/qlogic/qed/qed_cxt.c:2126:4: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23bna: Mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/net/ethernet/brocade/bna/bfa_ioc.c:790:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/brocade/bna/bfa_ioc.c:860:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23broadcom: Mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c:6336:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2231:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/broadcom/tg3.c:722:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/broadcom/tg3.c:783:6: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23net: 3c509: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/net/ethernet/3com/3c509.c:1265:8: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/3com/3c509.c:1271:8: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22bnx2x: Bump up driver version to 1.713.36Sudarsana Reddy Kalluru
Recently, there were bunch of fixes to bnx2x driver, the code is now aligned to out-of-box driver version 1.713.36. This patch updates bnx2x driver version to 1.713.36. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: Add SDPX tag based on COPYING fileAndrew Lunn
Some of the PHY and MDIO drivers refer to the COPYING file in the main directory of this archive. This is the main license for Linux, thus GPLv2 plus syscall extension. Fixup the MODULE_LICENSE() where needed and add an SDPX header for GPLv2. Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: Fixup GPLv2 SPDX tags based on license textAndrew Lunn
A few PHY drivers have the GPLv2 license text. They then either have a MODULE_LICENSE() of GPLv2+, or an SPDX tag of GPLv2+. Since the license text is much easier to understand than either the SPDX tag or the MODULE_LICENSE, use it as the definitive source of the licence, and fixup with others when there are contradictions. Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Laurent Pinchart <laurentp@cse-semaphore.com> Cc: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Scott Wood <scottwood@freescale.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Andrew F. Davis <afd@ti.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: Remove redundent License text when SPDX header is presentAndrew Lunn
The SPDX header makes any license text redundent. Remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: Convert some PHY and MDIO driver files to SPDX headersAndrew Lunn
Where the license text and the MODULE_LICENSE() value agree, convert to using an SPDX header, removing the license text. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22cxgb4/cxgb4vf: Link management changesVishal Kulkarni
1) Speed should be supported by Physical Port Capabilities. 2) report Forward Error Correction mode which are available. 3) Added few comments. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: dsa: qca8k: disable delay for RGMII modeVinod Koul
In RGMII mode we should not have any delay in port MAC, so disable the delay. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: at803x: Disable phy delay for RGMII modeVinod Koul
For RGMII mode, phy delay should be disabled. Add this case along with disable delay routines. Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: stmmac: Add driver for Qualcomm ethqosVinod Koul
Add glue driver to support Qualcomm ETHQOS using stmmac driver. This is based on downstream driver written by Siddarth Gupta, Sunil Kumar Paidimarri, Rahul Ankushrao Kawadgave, Nisha Menon, Jagadeesh Babu Challagundla, Chaitanya Pratapa, Lakshit Tyagi, Suraj Jaiswal, Sneh Shah and Ventrapragada Ravi Kanth Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: stmmac: implement the SIOCGHWTSTAMP ioctlArtem Panfilov
This patch adds support for the SIOCGHWTSTAMP ioctl which enables user processes to read the current hwtstamp_config settings non-destructively. Signed-off-by: Artem Panfilov <panfilov.artyom@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22hinic: Add pci device idsXue Chaojing
This patch adds PCI device IDs to support following cards: 1. Add device id 0x0205 for HINIC 100GE dual port mezz card. 2. Add device id 0x0210 for HINIC 25GE quad port mezz card. 3. Delete device id 0x0201 for HINIC 100GE dual port card, because this is used by other product. 4. Macro of device id 0x200 is modified for HINIC 100GE dual port card. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22r8169: remove PCI DAC supportHeiner Kallweit
The old non-PCIe chip versions support PCI DAC, however this feature seems to be fragile, see comment in the PCI error handler. Therefore it's disabled per default. I think meanwhile it's time remove support for this legacy feature. This helps to reduce complexity of the driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22r8169: improve rx buffer allocationHeiner Kallweit
8 years ago, as part of 6f0333b8fde4 ("r8169: use 50% less ram for RX ring"), the alignment requirement for rx buffers was silently changed from 8 bytes to 16 bytes. I found nothing explaining this, also the chip specs I have only mention an 8 byte requirement. AFAICS kmalloc_node() guarantees allocated memory to be at least "long long" aligned, what is 8 bytes on a 32 bit machine. So we can take this memory as-is and avoid some overhead by changing the alignment requirement back to 8 bytes. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: improve phy_init_hwHeiner Kallweit
Currently the soft reset (if defined) is done only if the driver also implements the config_init callback. I think this dependency is a mistake, so let's remove it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: phy: fix issue with loading PHY driver w/o initramfsHeiner Kallweit
It was reported that on a system with nfsboot and w/o initramfs network fails because trying to load the PHY driver returns -ENOENT. Reason was that due to missing initramfs the modprobe binary isn't available. So we have to ignore error code -ENOENT. Fixes: 13d0ab6750b2 ("net: phy: check return code when requesting PHY driver module") Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2019-01-22 This series contains updates to i40e and xsk. Jan exports xdp_get_umem_from_qid() for other drivers/modules to use. Refactored the code use the netdev provided umems, instead of containing them inside our i40e_vsi. Aleksandr fixes an issue where RSS queues were misconfigured, so limit the RSS queue number to the online CPU number. Damian adds support for ethtool's setting and getting the FEC configuration. Grzegorz fixes a type mismatch, where the return value was not matching the function declaration. Sergey adds checks in the queue configuration handler to ensure the number of queue pairs requested by the VF is less than maximum possible. Lihong cleans up code left around from earlier silicon validation in the i40e debugfs code. Julia Lawall and Colin Ian King clean up white space indentation issues found. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22bonding: add support for xstats and export 3ad statsNikolay Aleksandrov
This patch adds support for extended statistics (xstats) call to the bonding. The first user would be the 3ad code which counts the following events: - LACPDU Rx/Tx - LACPDU unknown type Rx - LACPDU illegal Rx - Marker Rx/Tx - Marker response Rx/Tx - Marker unknown type Rx All of these are exported via netlink as separate attributes to be easily extensible as we plan to add more in the future. Similar to how the bridge and other xstats exports, the structure inside is: [ IFLA_STATS_LINK_XSTATS ] -> [ LINK_XSTATS_TYPE_BOND ] -> [ BOND_XSTATS_3AD ] -> [ 3ad stats attributes ] With this structure it's easy to add more stat types later. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22bonding: add 3ad statsNikolay Aleksandrov
Count the following types of 3ad packets per slave: - rx/tx lacpdu - rx/tx marker - rx/tx marker response - rx illegal lacpdus (right now counted on wrong length) - rx unknown lacpdu type - rx unknown marker type The counters are using atomic64 since this is not fast path. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22bonding: 3ad: remove bond_3ad_rx_indication's length argumentNikolay Aleksandrov
Since the received lacpdu is accessed via skb_header_pointer() in bond_3ad_lacpdu_recv() we no longer need to check for skb->len's length. If the returned lacpdu pointer is not null that should be enough. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22bonding: adjust style of bond_3ad_rx_indicationNikolay Aleksandrov
No functional changes, adjust the style of bond_3ad_rx_indication to prepare it for the stats changes: - reduce indentation by returning early on wrong length - remove extra new lines between switch cases - add marker local variable and use it to reduce line length - rearrange local variables in reverse xmas tree - separate final return Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22cxgb4: TLS record offload enableAtul Gupta
Enable Inline TLS record by default Signed-off-by: Atul Gupta <atul.gupta@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22i40e: clean up several indentation issuesColin Ian King
There are several statements that have incorrect levels of indentation, fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: increase indentationJulia Lawall
Convert spaces to tabs to get correct alignment. Found with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: update version numberAlice Michael
Signed-off-by: Alice Michael <alice.michael@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-12 04:53:52 +0000