| Age | Commit message (Collapse) | Author |
|---|
|
This function is now only used from the buffers module, and is a trivial
field reference. Just inline it and drop the related artifacts.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move all the headroom code to the spectrum_buffers module, where it
belongs.
Rename mlxsw_sp_pg_buf_threshold_get() and mlxsw_sp_pg_buf_pack() to
..._hdroom_... to match the naming convention of the new headroom code.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ETS handler performs the headroom configuration in three steps: first
it resizes the buffers and adds any new ones. Then it redirects priorities
to the new buffers. And finally it sets the size of the now-unused buffers
to zero. This way no packet drops are introduced.
This sort of careful approach will also be useful for configuring port
buffer sizes and priority map by hand, through dcbnl_setbuffer. Therefore
move the code from the DCB handler to the generic headroom function.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The new hdroom code has certain conventions: iteration over priorities is
done through a variable named `prio', configuration is not pushed unless it
is dirty, but a `force' flag can be used to override this, updated
configuration is written to port. Convert the function
mlxsw_sp_port_pg_prio_map() to use these conventions and rename
appropriately to fit in.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ETS handler performs the headroom configuration in three steps: first
it resizes the buffers and adds any new ones. Then it redirects priorities
to the new buffers. And finally it sets the size of the now-unused buffers
to zero. This way no packet drops are introduced.
Both of the buffer size configuration operations are simply buffer size
configurations, there is no material difference between setting buffers to
zero and any other value. Therefore simply invoke the same
mlxsw_sp_hdroom_configure(), and drop mlxsw_sp_port_pg_destroy() and
mlxsw_sp_ets_has_pg() which are now unused.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Split mlxsw_sp_port_headroom_set() to three functions.
mlxsw_sp_hdroom_bufs_reset_sizes() changes the sizes of the individual PG
buffers, and mlxsw_sp_hdroom_configure_buffers() will actually apply the
configuration. A third function, mlxsw_sp_hdroom_bufs_fit(), verifies that
the requested buffer configuration matches total headroom size
requirements.
Add wrappers, mlxsw_sp_hdroom_configure() and __..., that will eventually
perform full headroom configuration, but for now, only have them verify the
configured headroom size, and invoke mlxsw_sp_hdroom_configure_buffers().
Have them take the `force` argument to prepare for a later patch, even
though it is currently unused.
Note that the loop in mlxsw_sp_hdroom_configure_buffers() only goes through
DCBX_MAX_BUFFERS. Since there is no logic to configure the control buffer,
it needs to keep the values queried from the FW. Eventually this function
should configure all the PGs.
Note that conversion of __mlxsw_sp_dcbnl_ieee_setets() is not trivial. That
function performs the headroom configuration in three steps: first it
resizes the buffers and adds any new ones. Then it redirects priorities to
the new buffers. And finally it sets the size of the now-unused buffers to
zero. This way no packet drops are introduced.
So after invoking mlxsw_sp_hdroom_bufs_reset_sizes(), tweak the
configuration to keep the old sizes of PG buffers for those buffers whose
size was set to zero.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
So far, port buffers were always autoconfigured. When dcbnl_setbuffer
callback is implemented, it will allow the user to change the buffer size
configuration by hand. The sizes therefore need to be a configuration
parameter, not always deduced, and therefore belong to struct
mlxsw_sp_hdroom, where the configuration routine should take them from.
Update mlxsw_sp_port_headroom_set() to update these sizes. Have the
function update the sizes even for the case that a given buffer is not
used.
Additionally, change the loop iteration end to DCBX_MAX_BUFFERS instead of
IEEE_8021QAZ_MAX_TCS. The value is the same, but the semantics differ.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Client-side configuration has lossiness as an attribute of a priority.
Therefore add a "lossy" attribute to struct mlxsw_sp_hdroom_prio.
To a Spectrum ASIC, lossiness is a feature of a port buffer. Therefore add
struct mlxsw_sp_hdroom_buf, which in the following patches will get more
attributes, but right now only use it to track port buffer lossiness.
Instead of passing around the primary indicators of PFC and pause_en, add a
function mlxsw_sp_hdroom_bufs_reset_lossiness() to compute the buffer
lossiness from the priority map and priority lossiness. Change
mlxsw_sp_port_headroom_set() to take the buffer lossy flag from the
headroom configuration. Have the PFC and pause handlers configure priority
lossiness in mlxsw_sp_hdroom, from where it will propagate.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The mapping from priorities to buffers determines which buffers should be
configured. Lossiness of these priorities combined with the mapping
determines whether a given buffer should be lossy.
Currently this configuration is stored implicitly in DCB ETS, PFC and
ethtool PAUSE configuration. Keeping it together with the rest of the
headroom configuration and deriving it as needed from PFC / ETS / PAUSE
will make things clearer. To that end, add a field "prios" to struct
mlxsw_sp_hdroom.
Previously, __mlxsw_sp_port_headroom_set() took prio_tc as an argument, and
assumed that the same mapping as we use on the egress should be used on
ingress as well. Instead, track this configuration at each priority, so
that it can be adjusted flexibly.
In the following patches, as dcbnl_setbuffer is implemented, it will need
to store its own mapping, and it will also be sometimes necessary to revert
back to the original ETS mapping. Therefore track two buffer indices: the
one for chip configuration (buf_idx), and the source one (ets_buf_idx).
Introduce a function to configure the chip-level buffer index, and for now
have it simply copy the ETS mapping over to the chip mapping.
Update the ETS handler to project prio_tc to the ets_buf_idx and invoke the
buf_idx recomputation.
Now that there is a canonical place to look for this configuration,
mlxsw_sp_port_headroom_set() does not need to invent def_prio_tc to use if
DCB is compiled out.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MTU influences sizes of auto-allocated buffers. Make it a part of port
buffer configuration and have __mlxsw_sp_port_headroom_set() take it from
there, instead of as an argument.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a priority is marked as lossless using DCB PFC, or when pause frames
are enabled on a port, mlxsw adds to port buffers an extra space to cover
the traffic that will arrive between the time that a pause or PFC frame is
emitted, and the time traffic actually stops. This is called the delay. The
concept is the same in PFC and pause, however the way the extra buffer
space is calculated differs.
In this patch, unify this handling. Delay is to be measured in bytes of
extra space, and will not include MTU. PFC handler sets the delay directly
from the parameter it gets through the DCB interface.
To convert pause handler, move MLXSW_SP_PAUSE_DELAY to ethtool module,
convert to bytes, and reduce it by maximum MTU, and divide by two. Then it
has the same meaning as the delay_bytes set by the PFC handler.
Keep the delay_bytes value in struct mlxsw_sp_hdroom introduced in the
previous patch. Change PFC and pause handlers to store the new delay value
there and have __mlxsw_sp_port_headroom_set() take it from there.
Instead of mlxsw_sp_pfc_delay_get() and mlxsw_sp_pg_buf_delay_get(),
introduce mlxsw_sp_hdroom_buf_delay_get() to calculate the delay provision.
Drop the unnecessary MLXSW_SP_CELL_FACTOR, and instead add an explanatory
comment describing the formula used.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The port headroom handling is currently strewn across several modules and
tricky to follow: MTU, DCB PFC, DCB ETS and ethtool pause all influence the
settings, and then there is the completely separate initial configuraion in
spectrum_buffers. A following patch will implement the dcbnl_setbuffer
callback, which is going to further complicate the landscape.
In order to simplify work with port buffers, the following patches are
going to centralize all port-buffer handling in spectrum_buffers. As a
first step, introduce a (currently empty) struct mlxsw_sp_hdroom that will
keep the configuration parameters, and allocate and free it in appropriate
places.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2020-09-15
Various updates to mlx5 driver,
1) Eli adds support for TC trap action.
2) Eran, minor improvements to clock.c code structure
3) Better handling of error reporting in LAG from Jianbo
4) IPv6 traffic class (DSCP) header rewrite support from Maor
5) Ofer Levi adds support for CQE compression of multi-strides packets
6) Vu, Enables use of vport meta data by default.
7) Some minor code cleanup
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As CHELSIO_INLINE_CRYPTO is bool, and CHELSIO_T4 is tristate, the
dependency of CHELSIO_INLINE_CRYPTO on CHELSIO_T4 is not sufficient to
protect CRYPTO_DEV_CHELSIO_TLS and CHELSIO_IPSEC_INLINE. The latter two
are also tristate, hence if CHELSIO_T4=n, they cannot be builtin, as
that would lead to link failures like:
drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c:259: undefined reference to `cxgb4_port_viid'
and
drivers/net/ethernet/chelsio/inline_crypto/ch_ipsec/chcr_ipsec.c:752: undefined reference to `cxgb4_reclaim_completed_tx'
Fix this by re-adding dependencies on CHELSIO_T4 to tristate symbols.
The dependency of CHELSIO_INLINE_CRYPTO on CHELSIO_T4 is kept to avoid
asking the user.
Fixes: 6bd860ac1c2a0ec2 ("chelsio/chtls: CHELSIO_INLINE_CRYPTO should depend on CHELSIO_T4")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce devlink health reporter to report FW fatal events. Implement
the event listener using MFDE trap and enable the events to be
propagated using MFGD register configuration.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce MFGD register that is used to configure firmware debugging.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce MFDE register that is passed through MFDE trap in case of
fatal FW event.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As the fw flashing code was moved to core.c, move the param which is
related to it there as well. Remove unnecessary parentheses on the way.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extract the code calling params register/unregister driver ops into
separate functions. Call publish/unpublish unconditionally.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As the firmware flashing is not specific to Spectrum, move the code to
core.c and avoid one op call and 2 exported symbols. Also, this allows
to do flash before call of driver->init function and possibly do other
core calls in between.
Do some small renaming here and there on the way to be consistent with
the rest of core.c code.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Among other changes, this version supports FW monitoring.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current implementation of stmmac_stop_all_queues() and
stmmac_start_all_queues() will not work correctly when the value of
tx_queues_to_use is changed through ethtool -L DEVNAME rx N tx M command.
Also, netif_tx_start|stop_all_queues() are only needed in driver open()
and close() only.
Fixes: c22a3f48 net: stmmac: adding multiple napi mechanism
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
netif_set_real_num_tx_queues() & netif_set_real_num_rx_queues() should be
used to inform network stack about the real Tx & Rx queue (active) number
in both stmmac_open() and stmmac_resume(), therefore, we move the code
from stmmac_dvr_probe() to stmmac_hw_setup().
Fixes: c02b7a914551 net: stmmac: use netif_set_real_num_{rx,tx}_queues
Signed-off-by: Aashish Verma <aashishx.verma@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Restructure NAPI add and delete process so that we can call them
accordingly in open() and ethtool_set_channels() accordingly.
Introduced stmmac_reinit_queues() to handle the transition needed
for changing Rx & Tx channels accordingly.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Check if the pause stats are reported by HW by checking the bitmap.
Calculation is based on the order of strings in main_strings from
ethtool -S. Hopefully the semantics of these stats match the standard..
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Plumb through all the indirection and copy some code from
ethtool -S. The names of the group indicate that these are
the stats we are after (and Saeed confirms it).
v3:
- fix build in mlx5_rep
v2:
- drop the ethool helper and call stats directly
- don't pass 0 as initialized to in buffer
- use local buffer
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Report standard pause frame stats. They are already aggregated
in struct ixgbe_hw_stats.
The combination of the registers is suggested as equivalent to
PAUSEMACCtrlFramesTransmitted / PAUSEMACCtrlFramesReceived
by the Intel 82576EB datasheet, I could not find any information
in the HW actually supported by ixgbe.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
These stats are already reported in ethtool -S.
Michael confirms they are equivalent to standard stats.
v2: - fix sparse warning about endian by using the macro
- use u64 for pointer type
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add minimal ethtool interface for testing ethtool pause stats.
v2: add missing static on nsim_ethtool_ops
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add CQE compression support for completions of packets that span
multiple strides in a Striding RQ, per the HW capability.
In our memory model, we use small strides (256B as of today) for the
non-linear SKB mode. This feature allows CQE compression to work also
for multiple strides packets. In this case decompressing the mini CQE
array will use stride index provided by HW as part of the mini CQE.
Before this feature, compression was possible only for single-strided
packets, i.e. for packets of size up to 256 bytes when in non-linear
mode, and the index was maintained by SW.
This feature is supported for ConnectX-5 and above.
Feature performance test:
This was whitebox-tested, we reduced the PCI speed from 125Gb/s to
62.5Gb/s to overload pci and manipulated mlx5 driver to drop incoming
packets before building the SKB to achieve low cpu utilization.
Outcome is low cpu utilization and bottleneck on pci only.
Test setup:
Server: Intel(R) Xeon(R) Silver 4108 CPU @ 1.80GHz server, 32 cores
NIC: ConnectX-6 DX.
Sender side generates 300 byte packets at full pci bandwidth.
Receiver side configuration:
Single channel, one cpu processing with one ring allocated. Cpu utilization
is ~20% while pci bandwidth is fully utilized.
For the generated traffic and interface MTU of 4500B (to activate the
non-linear SKB mode), packet rate improvement is about 19% from ~17.6Mpps
to ~21Mpps.
Without this feature, counters show no CQE compression blocks for
this setup, while with the feature, counters show ~20.7Mpps compressed CQEs
in ~500K compression blocks.
Signed-off-by: Ofer Levi <oferle@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Add support for rewriting of IPV6 DSCP part of traffic class field.
Next commands, for example, can be used to offload rewrite action:
OVS:
$ ovs-ofctl add-flow ovs-sriov "tcpv6, in_port=REP, \
actions=mod_nw_tos:68, output:NIC"
iproute2:
$ tc filter add dev REP ingress protocol ipv6 prio 1 flower skip_sw \
ip_proto tcp \
action pedit ex munge ip6 traffic_class set 68 retain 0xfc pipe \
action mirred egress redirect dev NIC
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Support tc trap such that packets can explicitly be forwarded to slow
path if they match a specific rule.
In the example below, we want packets with src IP equals 7.7.7.8 to be
forwarded to software, in which case it will get to the appropriate
representor net device.
$ tc filter add dev eth1 protocol ip prio 1 root flower skip_sw \
src_ip 7.7.7.8 action trap
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Multiple features use metadata matching such as bond vport
in live migration, multi-port RoCE mode, stacked devices;
hence, enable vport metadata matching by default.
Fixes: 1e62e222db2e ("net/mlx5: E-Switch, Use vport metadata matching only when mandatory")
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Oz Shlomo <ozsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In merged eswitch configuration, peer miss rule is setup for all
vports. If metadata is enabled, peer miss rule with metadata matching
will be configured instead of source port matching; however, some
vports that have not yet been enabled don't have default_metadata
setup and their default_metadata will be zero.
Hence, setup/cleanup default metadata for all vports when eswitch moves
in/out of offloads mode.
Fixes: 133dcfc577ea ("net/mlx5: E-Switch, Alloc and free unique metadata for match")
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Uplink vport must have a dedicated metadata with vhca_id
being part of the metadata.
Fixes: 133dcfc577ea ("net/mlx5: E-Switch, Alloc and free unique metadata for match")
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Check E-Switch capabilities and enable metadata support flag
before using it to setup other features that need metadata.
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
LAG offload can't be enabled if the enslaved PF is not lag master,
which is indicated by HCA capabilities bit. It is cleared if more than
64 VFs are configured for this PF.
Previously, a data structure is created to store lag info, including
PFs to be enslaved, then a handler is registered for netdev notifier.
However, this initialization is skipped if PF is not lag master. So
PF can't handle CHANGEUPPER event from upper bond device. Even worse,
PF is enslaved silently, and LAG offload is not activated.
Fix this by registering netdev notifier for PFs which are not lag
masters. When CHANGEUPPER event is received, and both physical ports
(and only them) on the same NIC are about to be enslaved, a warning is
returned for user to know it.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
If bond tx type is not active-backup or hash, LAG offload can't be
enabled. When CHANGEUPPER event is received, and both PFs (and only
them) under the same lag master are about to be enslaved, a warning
is returned for user to know the offload failure, otherwise PFs are
enslaved silently without LAG offload activated.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Raed Salem <raeds@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Change the return value to -ENOENT, to make it more meaningful.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Before calling timecounter_cyc2time(), clock->lock must be taken.
Use mlx5_timecounter_cyc2time instead which guarantees a safe access.
Fixes: afc98a0b46d8 ("net/mlx5: Update ptp_clock_event foreach PPS event")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
|
|
Holding the clock lock is not required when scheduling a PPS work.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
|
|
Fix a typo in ptp_clock_info naming: mlx5_p2p -> mlx5_ptp.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
|
|
Clock struct is part of struct mlx5_core_dev. Code was inconsistent, on
some cases used container_of and on another used clock->mdev.
Align code to use container_of amd remove clock->mdev pointer.
While here, fix reverse xmas tree coding style.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
|
|
This isn't a fall through because it was after a return statement. The
fall through annotation leads to a Smatch warning:
drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c:246
mlx5e_ethtool_get_sset_count() warn: ignoring unreachable code.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
Add variable initialization to eliminate the warning
"variable may be used uninitialized".
Fixes: 5f29458b77d5 ("net/mlx5e: Support dump callback in TX reporter")
Signed-off-by: Moshe Tal <moshet@mellanox.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Clean and rebuild the debugfs info for the queues being swapped.
Fixes: a34e25ab977c ("ionic: change the descriptor ring length without full reset")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new support for MT7531:
MT7531 is the next generation of MT7530. It is also a 7-ports switch with
5 giga embedded phys, 2 cpu ports, and the same MAC logic of MT7530. Cpu
port 6 only supports SGMII interface. Cpu port 5 supports either RGMII
or SGMII in different HW sku, but cannot be muxed to PHY of port 0/4 like
mt7530. Due to SGMII interface support, pll, and pad setting are different
from MT7530. This patch adds different initial setting, and SGMII phylink
handlers of MT7531.
MT7531 SGMII interface can be configured in following mode:
- 'SGMII AN mode' with in-band negotiation capability
which is compatible with PHY_INTERFACE_MODE_SGMII.
- 'SGMII force mode' without in-band negotiation
which is compatible with 10B/8B encoding of
PHY_INTERFACE_MODE_1000BASEX with fixed full-duplex and fixed pause.
- 2.5 times faster clocked 'SGMII force mode' without in-band negotiation
which is compatible with 10B/8B encoding of
PHY_INTERFACE_MODE_2500BASEX with fixed full-duplex and fixed pause.
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a structure holding required operations for each device such as device
initialization, PHY port read or write, a checker whether PHY interface is
supported on a certain port, MAC port setup for either bus pad or a
specific PHY interface.
The patch is done for ready adding a new hardware MT7531, and keep the
same setup logic of existing hardware.
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Refine message in Kconfig with fixing typo and an explicit MT7621 support.
Signed-off-by: Landen Chao <landen.chao@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
x25_type_trans only needs to be called before we call netif_rx to pass
the skb to upper layers.
It does not need to be called before lapb_data_received. The LAPB module
does not need the fields that are set by calling it.
In the other two X.25 drivers - lapbether and hdlc_x25. x25_type_trans
is only called before netif_rx and not before lapb_data_received.
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
