summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2018-05-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The bpf syscall and selftests conflicts were trivial overlapping changes. The r8169 change involved moving the added mdelay from 'net' into a different function. A TLS close bug fix overlapped with the splitting of the TLS state into separate TX and RX parts. I just expanded the tests in the bug fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf == X". Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: phy: DP83TC811: Introduce support for the DP83TC811 phyDan Murphy
Add support for the DP83811 phy. The DP83811 supports both rgmii and sgmii interfaces. There are 2 part numbers for this the DP83TC811R does not reliably support the SGMII interface but the DP83TC811S will. There is not a way to differentiate these parts from the hardware or register set. So this is controlled via the DT to indicate which phy mode is required. Or the part can be strapped to a certain interface. Data sheet can be found here: http://www.ti.com/product/DP83TC811S-Q1/description http://www.ti.com/product/DP83TC811R-Q1/description Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11cxgb4: avoid schedule while atomicGanesh Goudar
do not sleep while adding or deleting udp tunnel. Fixes: 846eac3fccec ("cxgb4: implement udp tunnel callbacks") Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11cxgb4: enable inner header checksum calculationGanesh Goudar
set cntrl bits to indicate whether inner header checksum needs to be calculated whenever the packet is an encapsulated packet and enable supported encap features. Fixes: d0a1299c6bf7 ("cxgb4: add support for vxlan segmentation offload") Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11cxgb4: Fix {vxlan/geneve}_port initializationArjun Vynipadath
adapter->rawf_cnt was not initialized, thereby ndo_udp_tunnel_{add/del} was returning immediately without initializing {vxlan/geneve}_port. Also initializes mps_encap_entry refcnt. Fixes: 846eac3fccec ("cxgb4: implement udp tunnel callbacks") Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11cxgb4: Add new T5 device idGanesh Goudar
Add 0x50ad device id for new T5 card. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11bonding: use the skb_get/set_queue_mappingTonghao Zhang
Use the skb_get_queue_mapping, skb_set_queue_mapping and skb_rx_queue_recorded for skb queue_mapping in bonding driver, but not use it directly. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11bonding: replace the return value typeTonghao Zhang
The method ndo_start_xmit is defined as returning a netdev_tx_t, which is a typedef for an enum type, but the implementation in this driver returns an int. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11mlxsw: spectrum_span: Use a more fitting error codePetr Machata
ENOENT is suitable when an item is looked for in a collection and can't be found. The failure here is actually a depletion of a resource, where ENOBUFS is the more fitting error code. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11mlxsw: spectrum_span: Rename misnamed variable l3edevPetr Machata
Calling the variable l3edev was relevant when neighbor lookup was the last stage in the simulated pipeline. Now that mlxsw handles bridges and vlan devices as well, calling it "L3" is a misnomer. Thus in mlxsw_sp_span_dmac(), rename to "dev", because that function is just a service routine where the distinction between tunnel and egress device isn't necessary. In mlxsw_sp_span_entry_tunnel_parms_common(), rename to "edev" to emphasize that the routine traces packet egress. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11ixgbe: fix memory leak on ipsec allocationColin Ian King
The error clean up path kfree's adapter->ipsec and should be instead kfree'ing ipsec. Fix this. Also, the err1 error exit path does not need to kfree ipsec because this failure path was for the failed allocation of ipsec. Detected by CoverityScan, CID#146424 ("Resource Leak") Fixes: 63a67fe229ea ("ixgbe: add ipsec offload add and remove SA") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-05-11ixgbevf: fix ixgbevf_xmit_frame()'s return typeLuc Van Oostenryck
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-05-11ixgbe: return error on unsupported SFP module when resettingEmil Tantilov
Add check for unsupported module and return the error code. This fixes a Coverity hit due to unused return status from setup_sfp. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-05-11ice: Set rq_last_status when cleaning rqJeff Shaw
Prior to this commit, the rq_last_status was only set when hardware responded with an error. This leads to rq_last_status being invalid in the future when hardware eventually responds without error. This commit resolves the issue by unconditionally setting rq_last_status with the value returned in the descriptor. Fixes: 940b61af02f4 ("ice: Initialize PF and setup miscellaneous interrupt") Signed-off-by: Jeff Shaw <jeffrey.b.shaw@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-05-11Merge tag 'mlx5-fixes-2018-05-10' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-05-10 the following series includes some fixes for mlx5 core driver. Please pull and let me know if there's any problem. For -stable v4.5 ("net/mlx5: E-Switch, Include VF RDMA stats in vport statistics") For -stable v4.10 ("net/mlx5e: Err if asked to offload TC match on frag being first") ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: dsa: bcm_sf2: Get rid of PHYLIB functionsFlorian Fainelli
Now that we have converted the bcm_sf2 driver to implement PHYLINK MAC operations, we can remove the PHYLIB callbacks: adjust_link() and fixed_link_update() which are no longer called by DSA. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: dsa: mv88e6xxx: add PHYLINK supportRussell King
Add rudimentary phylink support to mv88e6xxx. This allows the driver using user ports with fixed links to keep operating normally. User ports with normal PHYs are not affected since the switch automatically manages their link parameters. User facing ports which use a SFP/SFF with a non-fixed link mode might require a call to phylink_mac_change() to operate properly. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> [Andrew: fixed link setting after adding link polling] Signed-off-by: Andrew Lunn <andrew@lunn.ch> [florian: expand commit message] Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: dsa: bcm_sf2: Implement phylink_mac_opsFlorian Fainelli
Make the bcm_sf2 driver implement phylink_mac_ops since it needs to support a wide variety of network interfaces: internal & external MDIO PHYs, fixed PHYs, MoCA with MMIO link status. A large amount of what needs to be done already exists under bcm_sf2_sw_adjust_link() so we are essentially breaking this down into the necessary operation for PHYLINK to work: mac_config, mac_link_up, mac_link_down and validate. We can now entirely get rid of most of what fixed_link_update() provided because only the link information is actually necessary. We still have to force DUPLEX_FULL for legacy Device Tree bindings that did not specify that before. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: phy: phylink: Poll link GPIOsRussell King
When using a fixed link with a link GPIO, we need to poll that GPIO to determine link state changes. This is consistent with what fixed_phy.c does. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: phy: phylink: Release link GPIOFlorian Fainelli
We are not releasing the link GPIO descriptor with gpiod_put() which results in subsequent probing to get -EBUSY when calling fwnode_get_named_gpiod(). Fix this by doing the release in phylink_destroy(). Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11net: phy: phylink: Use gpiod_get_value_cansleep()Florian Fainelli
The GPIO provider for the link GPIO line might require the use of the _cansleep() API, utilize that. This is safe to do since we run in workqueue context. Fixes: 9525ae83959b ("phylink: add phylink infrastructure") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11mlxsw: core: Fix an error handling path in 'mlxsw_core_bus_device_register()'Christophe JAILLET
Resources are not freed in the reverse order of the allocation. Labels are also mixed-up. Fix it and reorder code and labels in the error handling path of 'mlxsw_core_bus_device_register()' Fixes: ef3116e5403e ("mlxsw: spectrum: Register KVD resources with devlink") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11bonding: send learning packets for vlans on slaveDebabrata Banerjee
There was a regression at some point from the intended functionality of commit f60c3704e87d ("bonding: Fix alb mode to only use first level vlans.") Given the return value vlan_get_encap_level() we need to store the nest level of the bond device, and then compare the vlan's encap level to this. Without this, this check always fails and learning packets are never sent. In addition, this same commit caused a regression in the behavior of balance_alb, which requires learning packets be sent for all interfaces using the slave's mac in order to load balance properly. For vlan's that have not set a user mac, we can send after checking one bit. Otherwise we need send the set mac, albeit defeating rx load balancing for that vlan. Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11bonding: do not allow rlb updates to invalid macDebabrata Banerjee
Make sure multicast, broadcast, and zero mac's cannot be the output of rlb updates, which should all be directed arps. Receive load balancing will be collapsed if any of these happen, as the switch will broadcast. Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net/mlx5e: Err if asked to offload TC match on frag being firstRoi Dayan
The HW doesn't support matching on frag first/later, return error if we are asked to offload that. Fixes: 3f7d0eb42d59 ("net/mlx5e: Offload TC matching on packets being IP fragments") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-10net/mlx5: E-Switch, Include VF RDMA stats in vport statisticsAdi Nissim
The host side reporting of VF vport statistics didn't include the VF RDMA traffic. Fixes: 3b751a2a418a ("net/mlx5: E-Switch, Introduce get vf statistics") Signed-off-by: Adi Nissim <adin@mellanox.com> Reported-by: Ariel Almog <ariela@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-10net/mlx5: Free IRQs in shutdown pathDaniel Jurgens
Some platforms require IRQs to be free'd in the shutdown path. Otherwise they will fail to be reallocated after a kexec. Fixes: 8812c24d28f4 ("net/mlx5: Add fast unload support in shutdown flow") Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-05-10Merge tag 'linux-can-fixes-for-4.17-20180510' of ↵David S. Miller
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== this is a pull request for net/master consisting of 2 patches. Both patches are from Lukas Wunner and fix two problems found in the hi311x CAN driver under high load situations. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10qed: fix spelling mistake: "taskelt" -> "tasklet"Colin Ian King
Trivial fix to spelling mistake in DP_VERBOSE message text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10rocker: Postpone filtering of !added_by_user FDBPetr Machata
Breaking out of the switch in rocker_switchdev_event() still ends up scheduling work, except an ill-defined one. This leads to an OOPS cited below. Fix by postponing the check until rocker_switchdev_event_work(). [ 23.148476] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 23.148810] PGD 0 P4D 0 [ 23.148982] Oops: 0000 [#1] PREEMPT SMP PTI [ 23.149190] Modules linked in: bridge stp llc iptable_nat nf_nat_ipv4 nf_nat e1000 rocker [ 23.149768] CPU: 0 PID: 239 Comm: kworker/u2:4 Not tainted 4.17.0-rc3-net_next_queue-custom #6 [ 23.150298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-2.fc27 04/01/2014 [ 23.150868] Workqueue: rocker rocker_switchdev_event_work [rocker] [ 23.151258] RIP: 0010:ofdpa_port_fdb+0x7b/0x230 [rocker] [ 23.151597] RSP: 0018:ffffc900004b3e18 EFLAGS: 00010246 [ 23.151952] RAX: 00000000fffbc68c RBX: 0000000000000000 RCX: 0000000000000000 [ 23.152363] RDX: 0000000000000010 RSI: ffff88003b4471e0 RDI: 00000000ffffffff [ 23.152768] RBP: ffff88003b4471c0 R08: ffff88003b4471e0 R09: ffff88003b4471c0 [ 23.153141] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880036caf000 [ 23.153515] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88003bc00000 [ 23.153919] FS: 0000000000000000(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 23.154444] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.154806] CR2: 0000000000000000 CR3: 0000000036eb6000 CR4: 00000000000006f0 [ 23.155194] Call Trace: [ 23.155472] rocker_switchdev_event_work+0x9b/0xd0 [rocker] [ 23.155850] ? __schedule+0x231/0x700 [ 23.156175] process_one_work+0x1cf/0x3e0 [ 23.156490] worker_thread+0x26/0x3d0 [ 23.156795] ? trace_event_raw_event_workqueue_execute_start+0x80/0x80 [ 23.157181] kthread+0x10e/0x130 [ 23.157485] ? kthread_create_worker_on_cpu+0x40/0x40 [ 23.157824] ret_from_fork+0x35/0x40 [ 23.158174] Code: 00 00 c1 e8 02 4c 8d 45 20 bf ff ff ff ff 83 e0 01 4c 89 65 20 88 45 14 48 8b 05 21 da 1f e2 4c 89 c6 4c 89 44 24 10 48 89 45 18 <41> 8b 45 00 89 45 28 41 0f b7 45 04 66 89 45 2c 0f b7 44 24 04 [ 23.159346] RIP: ofdpa_port_fdb+0x7b/0x230 [rocker] RSP: ffffc900004b3e18 [ 23.159742] CR2: 0000000000000000 [ 23.160088] ---[ end trace f9b16d4cb6df0629 ]--- Fixes: 816a3bed9549 ("switchdev: Add fdb.added_by_user to switchdev notifications") Suggested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10cxgb4: fix the wrong conversion of Mbps to KbpsGanesh Goudar
fix the wrong conversion where 1 Mbps was converted to 1024 Kbps. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10mlxsw: spectrum_span: Support VLAN under mirror-to-gretapPetr Machata
When mirroring to a gretap or ip6gretap device, allow the underlay packet path to include VLAN devices. The following configurations are supported in underlay: - vlan over phys - vlan-unaware bridge where the egress device is vlan over phys - vlan over vlan-aware bridge where the egress device is phys Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10mlxsw: spectrum_span: Support mirror-to-VLANPetr Machata
Offload "tc action mirred mirror" to a device that is a vlan device on top of a front-panel port device. The hardware encapsulates the mirrored packets in a VLAN tag. That includes the case that the mirrored traffic is already VLAN-tagged--in that case the monitor traffic will be double-tagged, just like in the software path. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10mlxsw: reg: Add MLXSW_REG_MPAT_SPAN_TYPE_REMOTE_ETHPetr Machata
Add MLXSW_REG_MPAT_SPAN_TYPE_REMOTE_ETH to support VLAN-encapsulated port mirroring. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net/mlx4_en: Fix an error handling path in 'mlx4_en_init_netdev()'Christophe JAILLET
If an error occurs, 'mlx4_en_destroy_netdev()' is called. It then calls 'mlx4_en_free_resources()' which does the needed resources cleanup. So, doing some explicit kfree in the error handling path would lead to some double kfree. Simplify code to avoid such a case. Fixes: 67f8b1dcb9ee ("net/mlx4_en: Refactor the XDP forwarding rings scheme") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10hv_netvsc: set master deviceStephen Hemminger
The hyper-v transparent bonding should have used master_dev_link. The netvsc device should look like a master bond device not like the upper side of a tunnel. This makes the semantics the same so that userspace applications looking at network devices see the correct master relationshipship. Fixes: 0c195567a8f6 ("netvsc: transparent VF management") Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10Merge tag 'mac80211-for-davem-2018-05-09' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We only have a few fixes this time: * WMM element validation * SAE timeout * add-BA timeout * docbook parsing * a few memory leaks in error paths ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10liquidio: bump up driver version to 1.7.2 to match newer NIC firmwareFelix Manlunas
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10liquidio: monitor all of Octeon's cores in watchdog threadFelix Manlunas
The liquidio_watchdog kernel thread is watching over only 12 cores of the Octeon CN23XX; it's neglecting the other 4 cores that are present in the CN2360. Fix it by defining LIO_MAX_CORES as 16. Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10Merge branch '100GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2018-05-09 This series contains updates to fm10k only. Jake provides all the changes in the series, starting with adding support for accelerated MACVLAN devices. Reduced code duplication by implementing a macro to be used when setting up the type specific macros. Avoided potential bugs with stats by using a macro to calculate the array size when passing to ensure that the size is correct. v2: changed macro reference '#' with __stringify() as suggested by Joe Perches to patch 2 of the series. Also made sure the updated series of patches is actually pushed to my kernel.org tree ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: hns3: refactor the loopback related functionYunsheng Lin
This patch refactors the loopback related function in order to support the serdes loopback. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: hns3: fix for cleaning ring problemYunsheng Lin
The head or tail in hardware is not longer valid when resetting, current hns3_clear_all_ring use them to clean the ring, which will cause problem during resetting. This patch fixes it by using next_to_use and next_to_clean in the ring struct. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: hns3: remove add/del_tunnel_udp in hns3_enet moduleYunsheng Lin
The add/del_tunnel_udp is not implemented in hclge_main moulde, the NETIF_F_RX_UDP_TUNNEL_PORT feature bit is added automatically by stack when ndo_udp_tunnel_add is not null in dev->netdev_ops. This patch removes the add/del_tunnel_udp related function, for we do not support this feature now. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: hns3: Fix for setting mac address when resettingYunsheng Lin
When hns3_init_mac_addr is called during reset process, it will get the mac address from NCL_CONFIG and set it to hardware. If user has changed the mac address, then the mac address set by user is lost during resetting. This patch fixes it by not getting the mac address from NCL_CONFIG when resetting. Fixes: 424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10hv_netvsc: typo in NDIS RSS parameters structureStephen Hemminger
Fix simple misspelling kashkey_offset should be hashkey_offset. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10drivers: net: davinci_mdio: prevent spurious timeoutSekhar Nori
A well timed kernel preemption in the time_after() loop in wait_for_idle() can result in a spurious timeout error to be returned. Fix it by using readl_poll_timeout() which takes care of this issue. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: dsa: mv88e6xxx: add RMU disable opVivien Didelot
The RMU mode bits moved a lot within the Global Control 2 register of the Marvell switch families. Add an .rmu_disable op to support at least 3 known alternatives. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: dsa: mv88e6xxx: set device numberVivien Didelot
All Marvell switches supported by mv88e6xxx have to set their device number in the Global Control 2 register. Extract this in a read then write function, called from the device mapping setup code. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: dsa: mv88e6xxx: add a cascade port opVivien Didelot
Only the 88E6185 family has bits 15:12 Cascade Port bits in the Global Control 2 register. Hence inconsistent values are actually written in this register for other families. Add a .set_cascade_port operation to isolate the 88E6185 case, and call it from the device mapping setup function. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net/mlx4_en: Verify coalescing parameters are in rangeMoshe Shemesh
Add check of coalescing parameters received through ethtool are within range of values supported by the HW. Driver gets the coalescing rx/tx-usecs and rx/tx-frames as set by the users through ethtool. The ethtool support up to 32 bit value for each. However, mlx4 modify cq limits the coalescing time parameter and coalescing frames parameters to 16 bits. Return out of range error if user tries to set these parameters to higher values. Change type of sample-interval and adaptive_rx_coal parameters in mlx4 driver to u32 as the ethtool holds them as u32 and these parameters are not limited due to mlx4 HW. Fixes: c27a02cd94d6 ('mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC') Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 19:23:43 +0000