summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2010-02-23Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-02-23tc35815: Remove a wrong netif_wake_queue() call which triggers BUG_ONAtsushi Nemoto
The netif_wake_queue() is called correctly (i.e. only on !txfull condition) from txdone routine. So Unconditional call to the netif_wake_queue() here is wrong. This might cause calling of start_xmit routine on txfull state and trigger BUG_ON. This bug does not happen when NAPI disabled. After txdone there must be at least one free tx slot. But with NAPI, this is not true anymore and the BUG_ON can hits on heavy load. In this driver NAPI was enabled on 2.6.33-rc1 so this is regression from 2.6.32 kernel. Reported-by: Ralf Roesch <ralf.roesch@rw-gmbh.de> Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23cdc_ether: new PID for Ericsson C3607w to the whitelist (resubmit)Torgny Johansson
This patch adds a new vid/pid to the cdc_ether whitelist. Device added: - Ericsson Mobile Broadband variant C3607w Signed-off-by: Torgny Johansson <torgny.johansson@gmail.com> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23e1000: Fix DMA mapping error handling on RXAnton Blanchard
Check for error return from pci_map_single/pci_map_page and clean up. With this and the previous patch the driver was able to handle a significant percentage of errors (I set the fault injection rate to 10% and could still download large files at a reasonable speed). Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22iwlwifi: sanity check before counting number of tfds can be freeStanislaw Gruszka
Check the frame control for ieee80211_is_data_qos() is true before counting the number of tfds can be free, the tfds_in_queue only increment when ieee80211_is_data_qos() is true before transmit; so it should only decrement if the type match. Remove ieee80211_is_data_qos check for frame_ctrl in tx_resp to avoid invalid information pass from uCode. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-22iwlwifi: error checking for number of tfds in queueWey-Yi Guy
When receive reply_tx and ready to decrement the count for number of tfds in queue, do error checking to prevent error condition and tfds_in_queue become negative number. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-19sfc: SFE4002/SFN4112F: Widen temperature and voltage tolerancesBen Hutchings
The temperature and voltage limits currently set on these boards are too conservative and will cause the driver to stop the net device erroneously in some systems. Based on a review of the chip datasheets and advice from the designer of these boards: - Raise the maximum board temperatures to the specified maximum ambient temperatures for their PHYs plus the expected temperature bias of the board - Raise the maximum controller temperature to 90 degrees - Lower the minimum temperatures to 0 degrees - Widen the voltage tolerances to at least +/- 10% Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19sfc: Fix sign of efx_mcdi_poll_reboot() error in efx_mcdi_poll()Ben Hutchings
efx_mcdi_poll() uses positive error numbers, matching the MCDI protocol. It must negate the result of efx_mcdi_poll_reboot() which returns the usual negative error numbers. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19iwlwifi: set HT flags after channel in rxonDan Halperin
The HT extension channel settings require priv->staging_rxon.channel to be accurate. However, iwl_set_rxon_ht was being called before iwl_set_rxon_channel and thus HT40 could be broken unless another call to iwl_mac_config came in. This problem was recently introduced by "iwlwifi: Fix to set correct ht configuration" The particular setting in which I noticed this was monitor mode: iwconfig wlan0 mode monitor ifconfig wlan0 up ./iw wlan0 set channel 64 HT40- #./iw wlan0 set channel 64 HT40- tcpdump -i wlan0 -y IEEE802_11_RADIO would only catch HT40 packets if I issued the IW command twice. From visual inspection, iwl_set_rxon_channel does not depend on iwl_set_rxon_ht, so simply swapping them should be safe and fixes this problem. Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-16be2net: set proper value to version field in req hdrAjit Khaparde
Before sending a command to the ASIC, set version properly. This is necessary for the ARM firmware to send correct data to the driver. This also fixes a bug in certain skews of the ASIC where the statistics are misreported. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15ixgbe: fix WOL register setup for 82599Don Skidmore
We need to have the WUS register set to all 1's in order for the hardware to be capable of ever waking up. Set it here in the ixgbe_probe(). Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-15ixgbe: Fix - Do not allow Rx FC on 82598 at 1G due to errataDon Skidmore
The 82598 has an erratum that receipt of pause frames at 1G could lead to a Tx Hang. To avoid this this patch disables Rx FC while at 1G speed for all 82598 parts. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-14Merge branch 'master' of ↵David S. Miller
ssh://master.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-02-12sfc: Fix SFE4002 initialisationSteve Hodgson
From: Steve Hodgson <shodgson@solarflare.com> Commit 357d46a17e54c9a87e0e6ef3930ff4ab2d232b81 "sfc: QT202x: Remove unreliable MMD check at initialisation" broke initialisation of the SFE4002. efx_mdio_reset_mmd() returns a positive value rather than 0 on success. The above commit causes this value to be propagated up by qt202x_reset_phy(), which is treated as a failure by its callers. Change qt202x_reset_phy() to return 0 if successful. The PCI layer treats >0 as "fail, but please call remove() anyway", which means that unloading the driver would cause a crash. Add a WARN_ON() on the failure path of efx_pci_probe() to provide early warning if there are any other cases where we do this. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12iwlwifi: fix AMSDU Rx after paged Rx patchShanyu Zhao
Previous patch "use paged Rx" broke AMSDU Rx functionality. If an AP sends out A-MSDU packets the station will crash. Fix it by linearizing skbuff for AMSDU packet before handing it to mac80211 since mac80211 doesn't support paged skbuff. This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2155 Reported-by: Norbert Preining <preining@logic.at> Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-10Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-02-10via-velocity: Fix races on shared interruptsSimon Kagstrom
This patch fixes two potential races in the velocity driver: * Move the ACK and error handler to the interrupt handler. This fixes a potential race with shared interrupts when the other device interrupts before the NAPI poll handler has finished. As the velocity driver hasn't acked it's own interrupt, it will then steal the interrupt from the other device. * Use spin_lock_irqsave in velocity_poll. In the current code, the interrupt handler will deadlock if e.g., the NAPI poll handler is executing when an interrupt (for another device) comes in since it tries to take the already held lock. Also unlock the spinlock only after enabling the interrupt in velocity_poll. The error path is moved to the interrupt handler since this is where the ISR is checked now. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: Anders Grafstrom <anders.grafstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10via-velocity: Take spinlock on set coalesceSimon Kagstrom
velocity_set_coalesce touches ISR and some other sensitive registers not covered by the rtnl lock, so take the velocity spinlock. Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10via-velocity: Remove unused IRQ status parameter from rx_srv and tx_srvSimon Kagstrom
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-10rtl8187: Add new device IDJelle Martijn Kok
Add new RTL8187B device. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09iwmc3200wifi: Test of wrong pointer after kzalloc in iwm_mlme_update_bss_table()Roel Kluin
The wrong pointer was tested. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-09ath9k: Fix sequence numbers for PAE framesSujith
Currently, PAE frames are not assigned proper sequence numbers. Since sending PAE frames as part of aggregates breaks crupto with several APs, they are sent as normal MPDUs. Fix the seqeuence number issue by updating the frame with the internal sequence number. Tested-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-08drivers/net: Correct NULL testJulia Lawall
Test the value that was just allocated rather than the previously tested one. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ expression *x; expression e; identifier l; @@ if (x == NULL || ...) { ... when forall return ...; } ... when != goto l; when != x = e when != &x *x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-08cxgb3: fix GRO checksum checkDivy Le Ray
Verify the HW checksum state for frames handed to GRO processing. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-08iwlwifi: Fix to set correct ht configurationWey-Yi Guy
iwl_set_rxon_ht() only get called in iwl_post_associate(); which cause possible incorrect ht configuration. Adding the call in iwl_mac_config() if IEEE80211_CONF_CHANGE_CHANNEL flag is set to re-configure and send rxon command. Fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2146 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-04igb: make certain to reassign legacy interrupt vectors after resetAlexander Duyck
This change corrects an issue that will cause false hangs when using either 82575 or 82580 in legacy interrupt mode. The issue is caused when there is a slow traffic flow and an "ethtool -r" is executed while using legacy or MSI interrupts. MSI-X is not affected by this issue due to the fact that we were already reconfiguring the vectors after reset. If possible it would be best to push this for net-2.6 since it is resolving a bug but if that is not possible then net-next-2.6 will be fine. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03ixgbe: Fix return of invalid txqKrishna Kumar
a developer had complained of getting lots of warnings: "eth16 selects TX queue 98, but real number of TX queues is 64" http://www.mail-archive.com/e1000-devel@lists.sourceforge.net/msg02200.html As there was no follow up on that bug, I am submitting this patch assuming that the other return points will not return invalid txq's, and also that this fixes the bug (not tested). Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03ixgbe: Fix ixgbe_tx_map error pathAnton Blanchard
Commit e5a43549f7a58509a91b299a51337d386697b92c (ixgbe: remove skb_dma_map/unmap calls from driver) looks to have introduced a bug in ixgbe_tx_map. If we get an error from a PCI DMA call, we loop backwards through count until it becomes -1 and return that. The caller of ixgbe_tx_map expects 0 on error, so return that instead. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03netxen: protect resource cleanup by rtnl lockAmit Kumar Salecha
o context resources can be in used, while resource cleanup is in progress, during fw recover. o Null pointer execption can occur in send_cmd_desc, if fw recovery module frees tx ring without rtnl lock. o Same applies to ethtool register dump. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03netxen: fix tx timeout recovery for NX2031 chipAmit Kumar Salecha
For NX2031, first try to scrub interrupt before requesting firmware reset. Return statement was missing after scrubbbing interrupt. Signed-off-by: Vernon Mauery <vernux@us.ibm.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03sky2: fix transmit DMA map leakagestephen hemminger
The book keeping structure for transmit always had the flags value cleared so transmit DMA maps were never released correctly. Based on patch by Jarek Poplawski, problem observed by Michael Breuer. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-03b43: Fix throughput regressionLarry Finger
Commit c7ab5ef9bcd281135c21b4732c9be779585181be entitled "b43: implement short slot and basic rate handling" reduced the transmit throughput for my BCM4311 device from 18 Mb/s to 0.7 Mb/s. The basic rate handling portion is OK, the problem is in the short slot handling. Prior to this change, the short slot enable/disable routines were never called. Experimentation showed that the critical part was changing the value at offset 0x0010 in the shared memory. This is supposed to contain the 802.11 Slot Time in usec, but if it is changed from its initial value of zero, performance is destroyed. On the other hand, changing the value in the MMIO register corresponding to the Interframe Slot Time increased performance from 18 to 22 Mb/s. A BCM4306/3 also shows dramatic improvement of the transmit rate from 5.3 to 19.0 Mb/s. Other changes in the patch include removal of the magic number for the MMIO register, and allowing the slot time to be set for any PHY operating in the 2.4 GHz band. Previously, the routine was executed only for G PHYs. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [Any stable version back through 2.6.28] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-02-02be2net: use eq-id to calculate cev-isr reg offsetSathya Perla
cev-isr reg offset for each function is better calculated using (any) eq-id alloted to that function instead of using pci-func number(which does not work in some configurations...) Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28cdc_ether: Partially revert "usbnet: Set link down initially ..."Ben Hutchings
Commit 37e8273cd30592d3a82bcb70cbb1bdc4eaeb6b71 ("usbnet: Set link down initially for drivers that update link state") changed the initial link state in cdc_ether and other drivers based on the understanding that the devices they support generate link change interrupts. However, this is optional in the CDC Ethernet protocol, and two users have reported in <http://bugzilla.kernel.org/show_bug.cgi?id=14791> that the link state for their devices remains down. Therefore, revert the change in cdc_ether. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Tested-by: Avi Rozen <avi.rozen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28be2net: Fix memset() arg ordering.David S. Miller
Noticed by Ben Hutchings. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28bonding: bond_open error return valuestephen hemminger
The convention for API functions in kernel is to return errno value; bond_open would return -1 if alb setup failed. The only reason that could happen is if kmalloc() failed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28ixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it earlyJohn Fastabend
Call ixgbe_copy_dcb_cfg() earlier in the ixgbe_dcbnl_set_all() so that we can learn if this is going to fail as early as possible. Previously, ixgbe_down or ixgbe_close were being called before this check and the IXGBE_RESETTING bit was being set and cleared. Worse if this failed the corresponding ixgbe_up/ndo_open would not called. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28ixgbe: set the correct DCB bit for pg tx settingsJohn Fastabend
Set the correct bit BIT_PG_TX when tx PG settings are set. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28igbvf: fix issue w/ mapped_as_page being left set after unmapAlexander Duyck
This change fixes an issue in igbvf with mapped_as_page being left set after a page is unmapped which results in buffers which are mapped via map single being unmapped as page. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28drivers/net: ks8851_mll ethernet network driverChoi, David
Hello David Miller, I fix a bug in ks8851_mll driver, which has existed since 2.6.32-rc6. >From : David J. Choi <david.choi@micrel.com> Fix a bug that the data pointers in the interrupt handler are set wrong, which is related with the 5th parameter of request_irq(). Signed-off-by : David J. Choi <david.choi@micrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28be2net: Bug fix to support newer generation of BE ASICAjit Khaparde
Bug fix in be2net for newer generation of BladeEngine ASIC. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-01-26starfire: clean up properly if firmware loading failsBen Hutchings
netdev_open() will return without cleaning up net device or hardware state if firmware loading fails. This results in a BUG() on a second attempt to bring the interface up, reported in <http://bugzilla.kernel.org/show_bug.cgi?id=15091>, and probably has even worse effects if the driver is removed afterwards. Call netdev_close() to clean up on failure. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=15091 Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Reported-by: Michael Moffatt <michael@moffatt.org.nz> Tested-by: Michael Moffatt <michael@moffatt.org.nz> Cc: "David S. Miller" <davem@davemloft.net> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-25virtio_net: Make delayed refill more reliableHerbert Xu
I have seen RX stalls on a machine that experienced a suspected OOM. After the stall, the RX buffer is empty on the guest side and there are exactly 16 entries available on the host side. As the number of entries is less than that required by a maximal skb, the host cannot proceed. The guest did not have a refill job scheduled. My diagnosis is that an OOM had occured, with the delayed refill job scheduled. The job was able to allocate at least one skb, but not enough to overcome the minimum required by the host to proceed. As the refill job would only reschedule itself if it failed completely to allocate any skbs, this would lead to an RX stall. The following patch removes this stall possibility by always rescheduling the refill job until the ring is totally refilled. Testing has shown that the RX stall no longer occurs whereas previously it would occur within a day. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-25sfc: Use fixed-size buffers for MCDI NVRAM requestsBen Hutchings
The low-level MCDI code always uses 32-bit MMIO operations, and callers must pad input and output buffers to multiples of 4 bytes. The MCDI NVRAM functions are not doing this. Also, their buffers are declared as variable-length arrays with no explicit maximum length. Switch to a fixed buffer size based on the chunk size used by the MTD driver (which is a multiple of 4). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-25sfc: Add workspace for GMAC bug workaround to MCDI MAC_STATS bufferGuido Barzini
Due to a hardware bug in the SFC9000 family, the firmware must transfer raw GMAC statistics to host memory before aggregating them into the cooked (speed-independent) MAC statistics. Extend the stats buffer to support this. The length of the buffer is explicit in the MAC_STATS command, so this change is backward-compatible on both sides. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-25qlge: Only free resources if they were allocatedBreno Leitao
Currently qlge tries to release regions even if they were not allocated. This causes messages like the following in the kernel log Trying to free nonexistent resource <00000000006af400-00000000006af4ff> Trying to free nonexistent resource <00003c04ff9f4000-00003c04ff9f7fff> Trying to free nonexistent resource <00003c04ffc00000-00003c04ffcfffff> This patch fixes the goto logic in order to not release the resources if they were not allocated. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-25ath9k: fix eeprom INI values override for 2GHz-only cardsFelix Fietkau
Among other changes, this commit: commit 06d0f0663e11cab4ec5f2c143a118d71a12fbbe9 Author: Sujith <Sujith.Manoharan@atheros.com> Date: Thu Feb 12 10:06:45 2009 +0530 ath9k: Enable Fractional N mode changed the hw attach code to fix up initialization values only for dual band devices, however the commit message did not give a reason as to why this would be useful or necessary. According to tests by Jorge Boncompte, this breaks at least some 2GHz-only cards, so the code should be changed back to the unconditional INI fixup. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Jorge Boncompte <jorge@dti2.net> Cc: stable@kernel.org Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-25iwlwifi: fix pointer signedness warningJohannes Berg
There are a few station addresses that are char *, instead of the normal u8 *; gcc gives pointer signedness warnings for some of those, so use u8 * consistently. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-24sky2: revert config space changestephen hemminger
Obviously, this register had some other impact that is causing the regression. Either it is masking some other access or needs to be reset in some path. Either, way it is best to just revert the change for 2.6.33 This reverts commit 166a0fd4c788ec7f10ca8194ec6d526afa12db75. Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 04:40:30 +0000