summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2021-04-17rtlwifi: rtl8188ee: remove redundant assignment of variable ↵Yang Li
rtlpriv->btcoexist.reg_bt_sco Assigning value "3" to "rtlpriv->btcoexist.reg_bt_sco" here, but that stored value is overwritten before it can be used. Coverity reports this problem as CWE563: A value assigned to a variable is never used. drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c: rtl8188ee_bt_reg_init Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1617182023-110950-1-git-send-email-yang.lee@linux.alibaba.com
2021-04-17rtlwifi: remove redundant assignment to variable errColin Ian King
Variable err is assigned -ENODEV followed by an error return path via label error_out that does not access the variable and returns with the -ENODEV error return code. The assignment to err is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210327230014.25554-1-colin.king@canonical.com
2021-04-17rtlwifi: Few mundane typo fixesBhaskar Chowdhury
s/resovle/resolve/ s/broadcase/broadcast/ s/sytem/system/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210320194426.21621-1-unixbhaskar@gmail.com
2021-04-17qtnfmac: remove meaningless labelswengjianfeng
some function's label meaningless, the return statement follows the goto statement, so just remove it. Signed-off-by: wengjianfeng <wengjianfeng@yulong.com> Reviewed-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210223065754.34392-1-samirweng1979@163.com
2021-04-17rtlwifi: 8821ae: upgrade PHY and RF parametersPing-Ke Shih
The signal strength of 5G is quite low, so user can't connect to an AP far away. New parameters with new format and its parser are updated by the commit 84d26fda52e2 ("rtlwifi: Update 8821ae new phy parameters and its parser."), but some parameters are missing. Use this commit to update to the novel parameters that use new format. Fixes: 84d26fda52e2 ("rtlwifi: Update 8821ae new phy parameters and its parser") Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210219052607.7323-1-pkshih@realtek.com
2021-04-17cw1200: Remove unused function pointer typedef wsm_*Chen Lin
Remove the 'wsm_*' typedef as it is not used. Signed-off-by: Chen Lin <chen.lin5@zte.com.cn> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1613449833-4910-1-git-send-email-chen45464546@163.com
2021-04-17cw1200: Remove unused function pointer typedef cw1200_wsm_handlerChen Lin
Remove the 'cw1200_wsm_handler' typedef as it is not used. Signed-off-by: Chen Lin <chen.lin5@zte.com.cn> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1613446918-4532-1-git-send-email-chen45464546@163.com
2021-04-17Merge tag 'iwlwifi-next-for-kalle-2021-04-12-v2' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next iwlwifi patches for v5.13 * Add support for new FTM FW APIs; * Some CSA fixes; * Support for new HW family and other HW detection fixes; * Robustness improvement in the HW detection code; * One fix in PMF; * Some new regulatory features; * Support for passive scan in 6GHz; * Some improvements in the sync queue implementation; * Support for new devices; * Support for a new FW API command version; * Some locking fixes; * Bump the FW API version support for AX devices; * Some other small fixes, clean-ups and improvements. # gpg: Signature made Wed 14 Apr 2021 12:33:29 PM EEST using RSA key ID 1A3CC5FA # gpg: Good signature from "Luciano Roth Coelho (Luca) <luca@coelho.fi>" # gpg: aka "Luciano Roth Coelho (Intel) <luciano.coelho@intel.com>"
2021-04-17Merge tag 'mt76-for-kvalo-2021-04-12' of https://github.com/nbd168/wirelessKalle Valo
mt76 patches for 5.13 * code cleanup * mt7915/mt7615 decap offload support * driver fixes * mt7613 eeprom support * MCU code unification * threaded NAPI support * new device IDs * mt7921 device reset support * rx timestamp support # gpg: Signature made Tue 13 Apr 2021 12:11:25 AM EEST using DSA key ID 02A76EF5 # gpg: Good signature from "Felix Fietkau <nbd@nbd.name>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 75D1 1A7D 91A7 710F 4900 42EF D77D 141D 02A7 6EF5
2021-04-14Merge tag 'linux-can-next-for-5.13-20210414' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next Marc Kleine-Budde says: ==================== pull-request: can-next 2021-04-14 this is a pull request of a single patch for net-next/master. Vincent Mailhol's patch fixes a NULL pointer dereference when handling error frames in the etas_es58x driver, which has been added in the previous PR. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14Merge tag 'mlx5-updates-2021-04-13' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2021-04-13 mlx5 core and netdev driver updates 1) E-Switch updates from Parav, 1.1) Devlink parameter to control mlx5 metadata enablement for E-Switch 1.2) Trivial cleanups for E-Switch code 1.3) Dynamically allocate vport steering namespaces only when required 2) From Jianbo, Use variably sized data structures for Software steering 3) Several minor cleanups ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14net: enetc: fetch MAC address from device treeMichael Walle
Normally, the bootloader will already initialize the MAC address registers of the ENETC and the driver will just use them or generate a random one, if it is not initialized. Add a new way to provide the MAC address: via device tree. Besides the usual 'mac-address' property, there is also the possibility to fetch it via a NVMEM provider. The sl28 board stores the MAC address in the SPI NOR flash OTP region. Having this will allow linux to fetch the MAC address from there without being dependent on the bootloader. No in-tree boards have the device tree properties set, thus for these, this is a no-op. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14sfc: Remove duplicate argumentWan Jiabing
Fix the following coccicheck warning: ./drivers/net/ethernet/sfc/enum.h:80:7-28: duplicated argument to | Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14r8169: add support for pause ethtool opsHeiner Kallweit
This adds support for the [g|s]et_pauseparam ethtool ops. It considers that the chip doesn't support pause frame use in jumbo mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14Merge branch '10GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 10GbE Intel Wired LAN Driver Updates 2021-04-13 This series contains updates to ixgbe and ixgbevf driver. Jostar Yang adds support for BCM54616s PHY for ixgbe. Chen Lin removes an unused function pointer for ixgbe and ixgbevf. Bhaskar Chowdhury fixes a typo in ixgbe. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14net: stmmac: Add support for external trigger timestampingTan Tee Min
The Synopsis MAC controller supports auxiliary snapshot feature that allows user to store a snapshot of the system time based on an external event. This patch add supports to the above mentioned feature. Users will be able to triggered capturing the time snapshot from user-space using application such as testptp or any other applications that uses the PTP_EXTTS_REQUEST ioctl request. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Tan Tee Min <tee.min.tan@intel.com> Co-developed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14net: phy: marvell-88x2222: swap 1G/10G modes on autonegIvan Bornyakov
Setting 10G without autonegotiation is invalid according to phy_ethtool_ksettings_set(). Thus, we need to set it during autonegotiation. If 1G autonegotiation can't complete for quite a time, but there is signal in line, switch line interface type to 10GBase-R, if supported, in hope for link to be established. And vice versa. If 10GBase-R link can't be established for quite a time, and autonegotiation is enabled, and there is signal in line, switch line interface type to appropriate 1G mode, i.e. 1000Base-X or SGMII, if supported. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14net: phy: marvell-88x2222: move read_status after config_anegIvan Bornyakov
No functional changes, just move read link status routines below autonegotiation configuration to make future functional changes more distinct. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14net: phy: marvell-88x2222: check that link is operationalIvan Bornyakov
Some SFP modules uses RX_LOS for link indication. In such cases link will be always up, even without cable connected. RX_LOS changes will trigger link_up()/link_down() upstream operations. Thus, check that SFP link is operational before actual read link status. If there is no SFP cage connected to the tranciever, check only PMD Recieve Signal Detect register. Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-14net/mlx5e: Fix RQ creation flow for queues which doesn't support XDPAya Levin
Allow to create an RQ which is not registered as an XDP RQ. For example: the trap-RQ doesn't register as an XDP RQ. Fixes: 869c5f926247 ("net/mlx5e: Generalize open RQ") Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: Replace spaces with tab at the start of a lineWenpeng Liang
There should be no spaces at the start of the line. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: Remove return statement exist at the end of void functionWenpeng Liang
void function return statements are not generally useful. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: Add a blank line after declarationsWenpeng Liang
There should be a blank lines after declarations. Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: Fix bit-wise and with zeroColin Ian King
The bit-wise and of the action field with MLX5_ACCEL_ESP_ACTION_DECRYPT is incorrect as MLX5_ACCEL_ESP_ACTION_DECRYPT is zero and not intended to be a bit-flag. Fix this by using the == operator as was originally intended. Addresses-Coverity: ("Logically dead code") Fixes: 7dfee4b1d79e ("net/mlx5: IPsec, Refactor SA handle creation and destruction") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: DR, Alloc cmd buffer with kvzalloc() instead of kzalloc()Roi Dayan
The cmd size is 8K so use kvzalloc(). Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: DR, Use variably sized data structures for different actionsJianbo Liu
mlx5dr_action is a generally used data structure, and there is an union for different types of actions in it. The size of mlx5dr_action is about 72 bytes, but for those actions with fewer fields, most of the allocated memory is wasted. Remove this union, and mlx5dr_action becomes a generic action header. Then actions are dynamically allocated with needed memory, the data for each action is stored right after the header. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: SF, Reuse stored hardware function idParav Pandit
SF's hardware function id is already stored in mlx5_sf. Reuse it, instead of querying the hw table. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: SF, Use device pointer directlyParav Pandit
At many places in the code, device pointer is directly available. Make use of it, instead of accessing it from the table. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, Initialize eswitch acls ns when eswitch is enabledParav Pandit
Currently eswitch flow steering (FS) namespace of vport's ingress and egress ACL are enabled when FS layer is initialized. This is done even when eswitch is diabled. This demands that total eswitch ports to be known to FS layer without eswitch in use. Given the FS core is not dependent on eswitch, make namespace init and cleanup routines as helper routines to be invoked only when eswitch is needed. With this change, ingress and egress ACL namespaces are created only when eswitch legacy/offloads mode is enabled. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, Move legacy code to a individual fileParav Pandit
Currently eswitch offers two modes. Legacy and offloads. Offloads code is already in its own file eswitch_offloads.c However eswitch.c contains the eswitch legacy code and common infrastructure code. To enable future extensions and to better manage generic common eswitch infrastructure code, move the legacy code to its own legacy.c file. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, Convert a macro to a helper routineParav Pandit
Convert ESW_ALLOWED macro to a helper routine so that it can be used in other eswitch files. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch Make cleanup sequence mirror of initParav Pandit
Make cleanup sequence mirror of init sequence for cleaning up reps and freeing vports. Also when reps initialization fails, there is no need to perform reps cleanup. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, Make vport number u16Parav Pandit
Vport number is 16-bit field in hardware. Make it u16. Move location of vport in the structure so that it reduces a hole in the structure. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, Skip querying SF enabled bitsParav Pandit
With vhca events, SF state is queried through the VHCA events. Device no longer expects SF bitmap in the query eswitch functions command. Hence, remove it to simplify the code. Signed-off-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-14net/mlx5: E-Switch, let user to enable disable metadataParav Pandit
Currently each packet inserted in eswitch is tagged with a internal metadata to indicate source vport. Metadata tagging is not always needed. Metadata insertion is needed for multi-port RoCE, failover between representors and stacked devices. In many other cases, metadata enablement is not needed. Metadata insertion slows down the packet processing rate of the E-switch when it is in switchdev mode. Below table show performance gain with metadata disabled for VXLAN offload rules in both SMFS and DMFS steering mode on ConnectX-5 device. ---------------------------------------------- | steering | metadata | pkt size | rx pps | | mode | | | (million) | ---------------------------------------------- | smfs | disabled | 128Bytes | 42 | ---------------------------------------------- | smfs | enabled | 128Bytes | 36 | ---------------------------------------------- | dmfs | disabled | 128Bytes | 42 | ---------------------------------------------- | dmfs | enabled | 128Bytes | 36 | ---------------------------------------------- Hence, allow user to disable metadata using driver specific devlink parameter. Metadata setting of the eswitch is applicable only for the switchdev mode. Example to show and disable metadata before changing eswitch mode: $ devlink dev param show pci/0000:06:00.0 name esw_port_metadata pci/0000:06:00.0: name esw_port_metadata type driver-specific values: cmode runtime value true $ devlink dev param set pci/0000:06:00.0 \ name esw_port_metadata value false cmode runtime $ devlink dev eswitch set pci/0000:06:00.0 mode switchdev Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vu Pham <vuhuong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> --- changelog: v1->v2: - added performance numbers in commit log - updated commit log and documentation for switchdev mode - added explicit note on when user can disable metadata in documentation
2021-04-14iwlwifi: dbg: disable ini debug in 9000 family and belowMukesh Sisodiya
Yoyo based debug is not applicable to old devices. As init debug is enabled by default in the driver, it needs to be disabled to work the old debug mechanism in old devices. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Fixes: b0d8d2c27007 ("iwlwifi: yoyo: enable yoyo by default") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.805401a1b8ec.I30db38184a418cfc1c5ca1a305cc14a52501d415@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: pcie: Change ma product string nameMatti Gottlieb
Change ma product string name to the correct name, and to reflect the CRF and not the CNV. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.c05b4c55540f.I8dd0361b033f63658999ba53640949701b048f17@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: fw: print out trigger delay when collecting dataJohannes Berg
It can be confusing to see "Collecting data: ..." followed by that not actually happening immediately so print out the delay in that message. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.5bd095dc579a.Id1f3b746ac61497951638ba7ce70fc4b63dd87d1@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: trans/pcie: defer transport initialisationJohannes Berg
In a few PCIe devices we may have to swap out the configuration after we allocate/initialise some parts of the device because we only know the correct one after reading some registers. This causes some things such as the byte-count table allocations to be incorrect, since the configuration is swapped for one with a bigger queue size. Fix this by initialising most of the transport much later, only after the configuration has finally been determined. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.8f5db97db1e4.Ic622da559b586a04ca536a0ec49ed5ecf03a9354@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: bump FW API to 63 for AX devicesLuca Coelho
Start supporting API version 63 for AX devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.a588a9dacd98.Ie4f96b8988c2cbd5f096ee64d0eb0f4829d55aee@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: don't WARN if we can't remove a time eventEmmanuel Grumbach
It is not very useful to WARN if we can't send a host command The firmware is likely in a bad situation and the fact that we didn't send the host command has an impact on the firmware only, not on the driver. The driver could clean up all its state. Don't WARN in this case, but just leave a smaller note. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.0324abc169c8.I4f9b769bc38d68f8ed43f77d2cd75e8f1993e964@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: don't disconnect immediately if we don't hear beacons after CSAEmmanuel Grumbach
When we switch channel, we may miss a few beacons on the new channel. Don't disconnect if the time event for the switch ends before we hear the beacons. Note that this is relevant only for old devices that still use the TIME_EVENT firmware API for channel switch. The check that we hear a beacon before the time event ends was meant to be used for the association time event and not for the channel switch time event. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.3d710091a0bd.I37a161ffdfb099a10080fbdc3b70a4deb76952e2@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: rs-fw: don't support stbc for HE 160Mordechay Goodstein
Our HE doesn't support it so never set HE 160 stbc Fixes: 3e467b8e4cf4 ("iwlwifi: rs-fw: enable STBC in he correctly") Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124418.550fd1903eb7.I8ddbc2f87044a5ef78d916c9c59be797811a1b7f@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: warn on SKB free w/o op-modeJohannes Berg
If this ever happens, and it looks like some code in PCIe is a bit broken and might lead to this, we want to know without crashing, so add a WARN_ON_ONCE(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124418.a18b7443dc55.Ia29836738acf14a55af5504aba90c6fea9fff785@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: add support for version 3 of LARI_CONFIG_CHANGE command.Miri Korenblit
Add support for version 3 of the LARI_CONFIG_CHANGE command. This is needed to support FW API change which is needed to support 11ax enablement in Russia. Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124418.7e68856c8a95.I83acdbe39b63c363cabc04ad42d1d0b9ce98901c@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: pcie: add ISR debug info for msix debugMordechay Goodstein
The debug prints help in case we get timeout on waiting for hw. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.306e2e56d3e8.I72e2977abbb1fddf23b8476bedf6a183fe969ff5@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: pcie: merge napi_poll_msix functionsMordechay Goodstein
The only difference between iwl_pcie_napi_poll_msix_shared() and iwl_pcie_napi_poll_msix() is when we have a shared queue and nothing in the rx queue. This case doesn't affect CPU performance, so we can merge the two functions. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.9d1b61ef53a5.I60b33d5379cf7c12f1de30fc3fd4cefc38220141@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: don't lock mutex in RCU critical sectionJohannes Berg
We cannot lock a mutex while we're in an RCU critical section. At the same time, we're accessing data structures that are protected by the mvm->mutex anyway, so just move the entire locking here to use only that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.4d27bd36e10e.I1fd8e8fe442c41a5deaa560452b598ed7a60ada5@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: remove PS from lower rates.Mordechay Goodstein
Power save (PS) should only be enabled when we reach the max phy rate. Before we reach it (MCS_9) for VHT, we should keep trying to improve the throughput. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.2a2fb9f9c25e.I7c7bbcfbdc1d35d2c3338778fb397dd5b08ea0e8@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2021-04-14iwlwifi: mvm: umac error table mismatchRoee Goldfiner
umac_error_table In TLV address was read using mask on MSB but on the same table in alive message it was without which caused mismatch in devices with different memory region MSB Signed-off-by: Roee Goldfiner <roee.h.goldfiner@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.179fee442115.Ib6eabe86cfda0b6044f07c07448c366b6e07e53d@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-10 05:54:43 +0000