summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2017-04-28mac80211: clean up rate encoding bits in RX statusJohannes Berg
In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-27Merge tag 'wireless-drivers-next-for-davem-2017-04-27' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.12 Few remaining patches for 4.12 submitted during the last week. Major changes: iwlwifi * the firmware for 7265D and 3168 NICs is frozen at version 29 * more support for the upcoming A000 series ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27qed: Acquire/release ptt_ptp lock when enabling/disabling PTP.sudarsana.kalluru@cavium.com
Move the code for acquiring/releasing ptt_ptp lock to ptp specific implementations i.e., ptp_enable()/disable() respectively. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27qed: Remove the un-needed ptp header file.sudarsana.kalluru@cavium.com
The patch deletes the qed_ptp.h file which is not required. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27qede: Add support for PTP resource locking.sudarsana.kalluru@cavium.com
The patch adds necessary changes to the driver to use qed resource locking functionality. Currently the ptp initialization is spread between driver probe/open implementations, associated APIs are qede_ptp_register_phc()/qede_ptp_start(). Clubbed this functionality into single API qed_ptp_enable() to simplify the usage of qed resource locking implementation. The new API will be invoked in the probe path. Similarly the ptp clean-up code is moved to qede_ptp_disable() which gets invoked in the driver unload path. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27qed: Add support for PTP resource locking.sudarsana.kalluru@cavium.com
The patch adds support for per-port resource lock in favour of PTP. PTP module acquires/releases the MFW resource lock while enabling/ disabling the PTP on the interface. The PF instance which has the ownership of this resource lock will get the exclusive access to the PTP clock functionality on the port. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27qed: Add support for MFW resource locking.sudarsana.kalluru@cavium.com
The patch adds API for default initialization of the MFW resource locking. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27net: vrf: Do not allow looback to be moved to a VRFDavid Ahern
Moving the loopback into a VRF breaks networking for the default VRF. Since the VRF device is the loopback for VRF domains, there is no reason to move the loopback. Given the repercussions, block attempts to set lo into a VRF. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26cfg80211: add request id parameter to .sched_scan_stop() signatureArend Van Spriel
For multiple scheduled scan support the driver needs to know which scheduled scan request is being stopped. Pass the request id in the .sched_scan_stop() callback. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26nl80211: allow multiple active scheduled scan requestsArend Van Spriel
This patch implements the idea to have multiple scheduled scan requests running concurrently. It mainly illustrates how to deal with the incoming request from user-space in terms of backward compatibility. In order to use multiple scheduled scans user-space needs to provide a flag attribute NL80211_ATTR_SCHED_SCAN_MULTI to indicate support. If not the request is treated as a legacy scan. Drivers currently supporting scheduled scan are now indicating they support a single scheduled scan request. This obsoletes WIPHY_FLAG_SUPPORTS_SCHED_SCAN. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [clean up netlink destroy path to avoid allocations, code cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26virtio-net: on tx, only call napi_disable if tx napi is onWillem de Bruijn
As of tx napi, device down (`ip link set dev $dev down`) hangs unless tx napi is enabled. Else napi_enable is not called, so napi_disable will spin on test_and_set_bit NAPI_STATE_SCHED. Only call napi_disable if tx napi is enabled. Fixes: 5a719c2552ca ("virtio-net: transmit napi") Reported-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26ibmvnic: Move initialization of sub crqs to ibmvnic_initNathan Fontenot
The sub crq structures are initialized in interrupt context while handling the response to crqs when negotiating capabilities for the driver. The sub crqs do not need to be initialized at this point and can be moved to being done from ibmvnic_init. Moving the init of the sub crqs to ibmvnic_init also allows use to allocate the memory with GFP_KERNEL instead of GFP_ATOMIC. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26ibmvnic: Split initialization of scrqs to its own routineNathan Fontenot
Split the sending of capability request crqs and the initialization of sub crqs into their own routines. This is a first step to moving the allocation of sub-crqs out of interrupt context. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26macsec: dynamically allocate space for sglistJason A. Donenfeld
We call skb_cow_data, which is good anyway to ensure we can actually modify the skb as such (another error from prior). Now that we have the number of fragments required, we can safely allocate exactly that amount of memory. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26Revert "phy: micrel: Disable auto negotiation on startup"David S. Miller
This reverts commit 99f81afc139c6edd14d77a91ee91685a414a1c66. It was papering over the real problem, which is fixed by commit f555f34fdc58 ("net: phy: fix auto-negotiation stall due to unavailable interrupt") Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26net: phy: fix auto-negotiation stall due to unavailable interruptAlexander Kochetkov
The Ethernet link on an interrupt driven PHY was not coming up if the Ethernet cable was plugged before the Ethernet interface was brought up. The patch trigger PHY state machine to update link state if PHY was requested to do auto-negotiation and auto-negotiation complete flag already set. During power-up cycle the PHY do auto-negotiation, generate interrupt and set auto-negotiation complete flag. Interrupt is handled by PHY state machine but doesn't update link state because PHY is in PHY_READY state. After some time MAC bring up, start and request PHY to do auto-negotiation. If there are no new settings to advertise genphy_config_aneg() doesn't start PHY auto-negotiation. PHY continue to stay in auto-negotiation complete state and doesn't fire interrupt. At the same time PHY state machine expect that PHY started auto-negotiation and is waiting for interrupt from PHY and it won't get it. Fixes: 321beec5047a ("net: phy: Use interrupts when available in NOLINK state") Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com> Cc: stable <stable@vger.kernel.org> # v4.9+ Tested-by: Roger Quadros <rogerq@ti.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26Merge tag 'iwlwifi-next-for-kalle-2017-04-26' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next One more pull-request intended for 4.12. These are the changes: * The firmware for 7265D and 3168 NICs is frozen at version 29; * Sari continues working heavily on support for A000 series; * A bunch of fixes; * Some cleanups here and there;
2017-04-26brcmfmac: Make skb header writable before useJames Hughes
The driver was making changes to the skb_header without ensuring it was writable (i.e. uncloned). This patch also removes some boiler plate header size checking/adjustment code as that is also handled by the skb_cow_header function used to make header writable. Signed-off-by: James Hughes <james.hughes@raspberrypi.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-26brcmfmac: Ensure pointer correctly set if skb data location changesJames Hughes
The incoming skb header may be resized if header space is insufficient, which might change the data adddress in the skb. Ensure that a cached pointer to that data is correctly set by moving assignment to after any possible changes. Signed-off-by: James Hughes <james.hughes@raspberrypi.org> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-26rndis_wlan: add return value validationPan Bian
Function create_singlethread_workqueue() will return a NULL pointer if there is no enough memory, and its return value should be validated before using. However, in function rndis_wlan_bind(), its return value is not checked. This may cause NULL dereference bugs. This patch fixes it. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-26libertas: check return value of alloc_workqueuePan Bian
Function alloc_workqueue() will return a NULL pointer if there is no enough memory, and its return value should be validated before using. However, in function if_spi_probe(), its return value is not checked. This may result in a NULL dereference bug. This patch fixes the bug. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-26mt7601u: check return value of alloc_skbPan Bian
Function alloc_skb() will return a NULL pointer if there is no enough memory. However, in function mt7601u_mcu_msg_alloc(), its return value is not validated before it is used. This patch fixes it. Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-26orinoco_usb: Fix buffer on stackMaksim Salau
Allocate buffer on HEAP instead of STACK for a local variable that is to be sent using usb_control_msg(). Signed-off-by: Maksim Salau <maksim.salau@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-26orinoco: fix spelling mistake: "Registerred" -> "Registered"Colin Ian King
trivial fix to spelling mistake in dbg_dbg message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-26rtlwifi: rtl8821ae: setup 8812ae RFE according to device typeLarry Finger
Current channel switch implementation sets 8812ae RFE reg value assuming that device always has type 2. Extend possible RFE types set and write corresponding reg values. Source for new code is http://dlcdnet.asus.com/pub/ASUS/wireless/PCE-AC51/DR_PCE_AC51_20232801152016.zip Signed-off-by: Maxim Samoylov <max7255@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-25iwlwifi: adjust NVM parsing APIs for new a000 methodSara Sharon
In a000 devices we will get all nvm data from the firmware, and can save most of the parsing. Export two APIs that op mode will still use. Adjust API of init_sbands to be independent of NVM file structure so it can be used by op mode as well. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: pcie: apply no-reclaim logic only to group 0Johannes Berg
When applying no-reclaim logic to commands other than the group zero for legacy commands, commands such as 0x1c (TX_CMD in group 0) can't be used in any other group. Fix that by applying this logic only for group 0 - it's not and should never be needed for any other groups. Reported-by: Sharon Dvir <sharon.dvir@intel.com> Reported-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: mvm: memset binding before setting valuesSara Sharon
The changes in commit 9415af7f306b ("iwlwifi: mvm: support new binding API") assigned values that were later memset to 0. Move the memset earlier. Fixes: 9415af7f306b ("iwlwifi: mvm: support new binding API") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: rename wait_for_tx_queues_emptySara Sharon
Rename current wait_tx_queue_empty to wait_tx_queues_empty since it waits for multiple queues (up to 32). Next patch will add a wait for single TX queue which is needed for gen2 to be scalable for 512. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: move to 512 queuesSara Sharon
Avoid using the old define since it will enlarge necessary structs for previous HW. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: mvm: support station type APISara Sharon
Support change to ADD_STA API to support station types. Each station is assigned its type. This simplifies FW handling of the broadcast and multicast stations: * broadcast station is identified by its type and not the mac address. * multicast queue is no longer treated differently. The opening and closing of it is done by referring to its station. There is no need to specify it in the MAC command. * When disabling TX to all station driver can disable the traffic on multicast station, so FW doesn't have to do it. Change is backward compatible. Change the order of adding and removing the stations according to FW requirements. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: mvm: remove references to queue_info in new TX pathSara Sharon
Most of the fields aren't needed in new TX path. Enlarging the struct to 512 queues will consume a lot of memory. Remove all references to the struct in the new TX path. Move mac80211 queue mapping outside, since it will be needed per queue for TVQM mode. Add warning in paths that shouldn't be hit. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: gen2: support nmi triggering from hostLiad Kaufman
For gen2 there is a new register. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: remove module loading failure messageJohannes Berg
When CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, iwlwifi crashes when the opmode module cannot be loaded, due to completing the completion before using drv->dev, which can then already be freed. Fix this by removing the (fairly useless) message. Moving the completion later causes a deadlock instead, so that's not an option. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: don't leak memory on allocation failureJohannes Berg
If we fail to allocate the small chunk of memory for the pieces of the firmware file, we leak the whole firmware image instead... Since the allocation failure is really unlikely, just bail out at that point instead. Remove the error message at the label since we now (and actually have been) use it for various reasons. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: pcie: remove superfluous trans->dev assignmentJohannes Berg
This struct member is already assigned in the previous call to iwl_trans_alloc(), so assigning the same value again is superfluous - remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: mvm: use defines instead of variables for shared dwell timesSara Sharon
Most of the dwells are constant across different scan types. Use defines instead of depending on scan type. This is needed as preparation to having different scan type per band. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: mvm: remove color definitionSara Sharon
We use the full station field as sta_id, and never use the color. FW are about to clean the color out, so those defines are incorrect now (and were redundant before). Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: mvm: move internally to use bigger INVALID_TXQSara Sharon
We can't use IEEE80211_INVAL_HW_QUEUE to mark a queue as invalid since 255 will be a valid value for a TVQM queue index. Use IWL_MVM_INVALID_QUEUE instead for accessing txq_id. reserved_queue can stay a u8 since reserved_queue is not used when TVQM is enabled. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: mvm: map cab_queue to different txq_idSara Sharon
cab_queue can now get bigger than u8, since in TVQM we will support 512 queues.. Support it by maintaining internal mapping between the actual number and mac80211 queue (IWL_MVM_DQA_GCAST_QUEUE). For pre-a000 the internal queue will be the same as the mac80211 queue. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: mvm: Ignore wifi mcc update in the driver while associatedHaim Dreyfuss
Wifi mcc (mobile country code) update is forbidden while associated. Currently, FW prevents these updates and the driver is unaware to this logic. From now on, the FW sends every wifi mcc update to the driver. The driver in his turn needs to decide whether to ignore it or not, depends on the association state. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: mvm: don't reserve queue in TVQM modeSara Sharon
The reserved queue is never used, save the trouble. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: pcie: support debug applying on a000 hwLiad Kaufman
Allow configuring debug destination on a000 HW. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: mvm: avoid variable shadowingJohannes Berg
Remove an extra variable 'queue' that already exists. Also, since there are no code paths that use 'queue' without intializing it, remove the unnecessary zero initialization. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25iwlwifi: mvm: freeze 7265D and 3168 on API version 29Dor Shaish
iwl7265D and iwl3168 are frozen on API version 29. Set the MAX API allowed level to 29 from now on. Signed-off-by: Dor Shaish <dor.shaish@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2017-04-25drivers: net: xgene-v2: Fix error return code in xge_mdio_config()Wei Yongjun
Fix to return error code -ENODEV from the no PHY found error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed: fix invalid use of sizeof in qed_alloc_qm_data()Wei Yongjun
sizeof() when applied to a pointer typed expression gives the size of the pointer, not that of the pointed data. Fixes: b5a9ee7cf3be ("qed: Revise QM configuration") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25qed: Fix error in the dcbx app meta data initialization.sudarsana.kalluru@cavium.com
DCBX app_data array is initialized with the incorrect values for personality field. This would prevent offloaded protocols from honoring the PFC. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25netvsc: fix calculation of available send sectionsstephen hemminger
My change (introduced in 4.11) to use find_first_clear_bit incorrectly assumed that the size argument was words, not bits. The effect was only a small limited number of the available send sections were being actually used. This can cause performance loss with some workloads. Since map_words is now used only during initialization, it can be on stack instead of in per-device data. Fixes: b58a185801da ("netvsc: simplify get next send section") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 23:50:12 +0000