summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2021-02-21Merge tag 'hyperv-next-signed-20210216' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull Hyper-V updates from Wei Liu: - VMBus hardening patches from Andrea Parri and Andres Beltran. - Patches to make Linux boot as the root partition on Microsoft Hypervisor from Wei Liu. - One patch to add a new sysfs interface to support hibernation on Hyper-V from Dexuan Cui. - Two miscellaneous clean-up patches from Colin and Gustavo. * tag 'hyperv-next-signed-20210216' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (31 commits) Revert "Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer" iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition x86/hyperv: implement an MSI domain for root partition asm-generic/hyperv: import data structures for mapping device interrupts asm-generic/hyperv: introduce hv_device_id and auxiliary structures asm-generic/hyperv: update hv_interrupt_entry asm-generic/hyperv: update hv_msi_entry x86/hyperv: implement and use hv_smp_prepare_cpus x86/hyperv: provide a bunch of helper functions ACPI / NUMA: add a stub function for node_to_pxm() x86/hyperv: handling hypercall page setup for root x86/hyperv: extract partition ID from Microsoft Hypervisor if necessary x86/hyperv: allocate output arg pages if required clocksource/hyperv: use MSR-based access if running as root Drivers: hv: vmbus: skip VMBus initialization if Linux is root x86/hyperv: detect if Linux is the root partition asm-generic/hyperv: change HV_CPU_POWER_MANAGEMENT to HV_CPU_MANAGEMENT hv: hyperv.h: Replace one-element array with flexible-array in struct icmsg_negotiate hv_netvsc: Restrict configurations on isolated guests Drivers: hv: vmbus: Enforce 'VMBus version >= 5.2' on isolated guests ...
2021-02-21Merge tag 'for-linus-5.12-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "A series of Xen related security fixes, all related to limited error handling in Xen backend drivers" * tag 'for-linus-5.12-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-blkback: fix error handling in xen_blkbk_map() xen-scsiback: don't "handle" error by BUG() xen-netback: don't "handle" error by BUG() xen-blkback: don't "handle" error by BUG() xen/arm: don't ignore return errors from set_phys_to_machine Xen/gntdev: correct error checking in gntdev_map_grant_pages() Xen/gntdev: correct dev_bus_addr handling in gntdev_map_grant_pages() Xen/x86: also check kernel mapping in set_foreign_p2m_mapping() Xen/x86: don't bail early from clear_foreign_p2m_mapping()
2021-02-20Merge tag 'tty-5.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here is the big set of tty/serial driver changes for 5.12-rc1. Nothing huge, just lots of good cleanups and additions: - n_tty line discipline cleanups - vt core cleanups and reworks to make the code more "modern" - stm32 driver additions - tty led support added to the tty core and led layer - minor serial driver fixups and additions All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (54 commits) serial: core: Remove BUG_ON(in_interrupt()) check vt_ioctl: Remove in_interrupt() check dt-bindings: serial: imx: Switch to my personal address vt: keyboard, use new API for keyboard_tasklet serial: stm32: improve platform_get_irq condition handling in init_port serial: ifx6x60: Remove driver for deprecated platform tty: fix up iterate_tty_read() EOVERFLOW handling tty: fix up hung_up_tty_read() conversion tty: fix up hung_up_tty_write() conversion tty: teach the n_tty ICANON case about the new "cookie continuations" too tty: teach n_tty line discipline about the new "cookie continuations" tty: clean up legacy leftovers from n_tty line discipline tty: implement read_iter tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer serial: remove sirf prima/atlas driver serial: mxs-auart: Remove <asm/cacheflush.h> serial: mxs-auart: Remove serial_mxs_probe_dt() serial: fsl_lpuart: Use of_device_get_match_data() dt-bindings: serial: renesas,hscif: Add r8a779a0 support tty: serial: Drop unused efm32 serial driver ...
2021-02-19i40e: Fix endianness conversionsNorbert Ciosek
Fixes the following sparse warnings: i40e_main.c:5953:32: warning: cast from restricted __le16 i40e_main.c:8008:29: warning: incorrect type in assignment (different base types) i40e_main.c:8008:29: expected unsigned int [assigned] [usertype] ipa i40e_main.c:8008:29: got restricted __le32 [usertype] i40e_main.c:8008:29: warning: incorrect type in assignment (different base types) i40e_main.c:8008:29: expected unsigned int [assigned] [usertype] ipa i40e_main.c:8008:29: got restricted __le32 [usertype] i40e_txrx.c:1950:59: warning: incorrect type in initializer (different base types) i40e_txrx.c:1950:59: expected unsigned short [usertype] vlan_tag i40e_txrx.c:1950:59: got restricted __le16 [usertype] l2tag1 i40e_txrx.c:1953:40: warning: cast to restricted __le16 i40e_xsk.c:448:38: warning: invalid assignment: |= i40e_xsk.c:448:38: left side has type restricted __le64 i40e_xsk.c:448:38: right side has type int Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Fixes: 2a508c64ad27 ("i40e: fix VLAN.TCI == 0 RX HW offload") Fixes: 3106c580fb7c ("i40e: Use batched xsk Tx interfaces to increase performance") Fixes: 8f88b3034db3 ("i40e: Add infrastructure for queue channel support") Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-19i40e: Fix add TC filter for IPv6Mateusz Palczewski
Fix insufficient distinction between IPv4 and IPv6 addresses when creating a filter. IPv4 and IPv6 are kept in the same memory area. If IPv6 is added, then it's caught by IPv4 check, which leads to err -95. Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-18i40e: Fix VFs not createdSylwester Dziedziuch
When creating VFs they were sometimes not getting resources. It was caused by not executing i40e_reset_all_vfs due to flag __I40E_VF_DISABLE being set on PF. Because of this IAVF was never able to finish setup sequence never getting reset indication from PF. Changed test_and_set_bit __I40E_VF_DISABLE in i40e_sync_filters_subtask to test_bit and removed clear_bit. This function should not set this bit it should only check if it hasn't been already set. Fixes: a7542b876075 ("i40e: check __I40E_VF_DISABLE bit in i40e_sync_filters_subtask") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-18i40e: Fix addition of RX filters after enabling FW LLDP agentMateusz Palczewski
Fix addition of VLAN filter for PF after enabling FW LLDP agent. Changing LLDP Agent causes FW to re-initialize per NVM settings. Remove default PF filter and move "Enable/Disable" to currently used reset flag. Without this patch PF would try to add MAC VLAN filter with default switch filter present. This causes AQ error and sets promiscuous mode on. Fixes: c65e78f87f81 ("i40e: Further implementation of LLDP") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-18i40e: Fix overwriting flow control settings during driver loadingMateusz Palczewski
During driver loading flow control settings were written to FW using a variable which was always zero, since it was being set only by ethtool. This behavior has been corrected and driver no longer overwrites the default FW/NVM settings. Fixes: 373149fc99a0 ("i40e: Decrease the scope of rtnl lock") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-18i40e: Add zero-initialization of AQ command structuresMateusz Palczewski
Zero-initialize AQ command data structures to comply with API specifications. Fixes: 2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower") Fixes: f4492db16df8 ("i40e: Add NPAR BW get and set functions") Signed-off-by: Andrzej Sawuła <andrzej.sawula@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-18i40e: Fix memory leak in i40e_probeKeita Suzuki
Struct i40e_veb is allocated in function i40e_setup_pf_switch, and stored to an array field veb inside struct i40e_pf. However when i40e_setup_misc_vector fails, this memory leaks. Fix this by calling exit and teardown functions. Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-18i40e: Fix flow for IPv6 next header (extension header)Slawomir Laba
When a packet contains an IPv6 header with next header which is an extension header and not a protocol one, the kernel function skb_transport_header called with such sk_buff will return a pointer to the extension header and not to the TCP one. The above explained call caused a problem with packet processing for skb with encapsulation for tunnel with I40E_TX_CTX_EXT_IP_IPV6. The extension header was not skipped at all. The ipv6_skip_exthdr function does check if next header of the IPV6 header is an extension header and doesn't modify the l4_proto pointer if it points to a protocol header value so its safe to omit the comparison of exthdr and l4.hdr pointers. The ipv6_skip_exthdr can return value -1. This means that the skipping process failed and there is something wrong with the packet so it will be dropped. Fixes: a3fd9d8876a5 ("i40e/i40evf: Handle IPv6 extension headers in checksum offload") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-02-18Merge tag 'v5.11' into rdma.git for-nextJason Gunthorpe
Linux 5.11 Merged to resolve conflicts with RDMA rc commits - drivers/infiniband/sw/rxe/rxe_net.c The final logic is to call rxe_get_dev_from_net() again with the master netdev if the packet was rx'd on a vlan. To keep the elimination of the local variables requires a trivial edit to the code in -rc Link: https://lore.kernel.org/r/20210210131542.215ea67c@canb.auug.org.au Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-17octeontx2-pf: Fix otx2_get_fecparam()Dan Carpenter
Static checkers complained about an off by one read overflow in otx2_get_fecparam() and we applied two conflicting fixes for it. Correct: b0aae0bde26f ("octeontx2: Fix condition.") Wrong: 93efb0c65683 ("octeontx2-pf: Fix out-of-bounds read in otx2_get_fecparam()") Revert the incorrect fix. Fixes: 93efb0c65683 ("octeontx2-pf: Fix out-of-bounds read in otx2_get_fecparam()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17cteontx2-pf: cn10k: Prevent harmless double shift bugsDan Carpenter
These defines are used with set_bit() and test_bit() which take a bit number. In other words, the code is doing: if (BIT(BIT(1)) & pf->hw.cap_flag) { This was done consistently so it did not cause a problem at runtime but it's still worth fixing. Fixes: facede8209ef ("octeontx2-pf: cn10k: Add mbox support for CN10K") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: stmmac: Add PCI bus info to ethtool driver query outputWong Vee Khee
This patch populates the PCI bus info in the ethtool driver query data. Users will be able to view PCI bus info using 'ethtool -i <interface>'. Signed-off-by: Wong Vee Khee <vee.khee.wong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: stmmac: dwmac-sun8i: Add a shutdown callbackSamuel Holland
The Ethernet MAC and PHY are usually major consumers of power on boards which may not be able to fully power off (those with no PMIC). Powering down the MAC and internal PHY saves power while these boards are "off". Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: stmmac: dwmac-sun8i: Minor probe function cleanupSamuel Holland
Adjust the spacing and use an explicit "return 0" in the success path to make the function easier to parse. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: stmmac: dwmac-sun8i: Use reset_control_resetSamuel Holland
Use the appropriate function instead of reimplementing it, and update the error message to match the code. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: stmmac: dwmac-sun8i: Remove unnecessary PHY power checkSamuel Holland
sun8i_dwmac_unpower_internal_phy already checks if the PHY is powered, so there is no need to do it again here. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: stmmac: dwmac-sun8i: Return void from PHY unpowerSamuel Holland
This is a deinitialization function that always returned zero, and that return value was always ignored. Have it return void instead. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17r8169: use macro pm_ptrHeiner Kallweit
Use macro pm_ptr(), this helps to avoid some ifdeffery. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: mdio: Remove of_phy_attach()Florian Fainelli
We have no in-tree users, also update the sfp-phylink.rst documentation to indicate that phy_attach_direct() is used instead of of_phy_attach(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: mscc: ocelot: select PACKING in the KconfigVladimir Oltean
Ocelot now uses include/linux/dsa/ocelot.h which makes use of CONFIG_PACKING to pack/unpack bits into the Injection/Extraction Frame Headers. So it needs to explicitly select it, otherwise there might be build errors due to the missing dependency. Fixes: 40d3f295b5fe ("net: mscc: ocelot: use common tag parsing code with DSA") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17Merge tag 'asoc-v5.12' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v5.12 Another quiet release in terms of features, though several of the drivers got quite a bit of work and there were a lot of general changes resulting from Morimoto-san's ongoing cleanup work. - As ever, lots of hard work by Morimoto-san cleaning up the code and making it more consistent. - Many improvements in the Intel drivers including a wide range of quirks and bug fixes. - A KUnit testsuite for the topology code. - Support for Ingenic JZ4760(B), Intel AlderLake-P, DT configured nVidia cards, Qualcomm lpass-rx-macro and lpass-tx-macro - Removal of obsolete SIRF prima/atlas, Txx9 and ZTE zx drivers.
2021-02-16net: re-solve some conflicts after net -> net-next mergeJakub Kicinski
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
2021-02-16net: phy: broadcom: Do not modify LED configuration for SFP module PHYsRobert Hancock
bcm54xx_config_init was modifying the PHY LED configuration to enable link and activity indications. However, some SFP modules (such as Bel-Fuse SFP-1GBT-06) have no LEDs but use the LED outputs to control the SFP LOS signal, and modifying the LED settings will cause the LOS output to malfunction. Skip this configuration for PHYs which are bound to an SFP bus. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: Add is_on_sfp_module flag and phy_on_sfp helperRobert Hancock
Add a flag and helper function to indicate that a PHY device is part of an SFP module, which is set on attach. This can be used by PHY drivers to handle SFP-specific quirks or behavior. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: broadcom: Set proper 1000BaseX/SGMII interface mode for BCM54616SRobert Hancock
The default configuration for the BCM54616S PHY may not match the desired mode when using 1000BaseX or SGMII interface modes, such as when it is on an SFP module. Add code to explicitly set the correct mode using programming sequences provided by Bel-Fuse: https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-05-series.pdf https://www.belfuse.com/resources/datasheets/powersolutions/ds-bps-sfp-1gbt-06-series.pdf Signed-off-by: Robert Hancock <robert.hancock@calian.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16lan743x: sync only the received area of an rx ring bufferSven Van Asbroeck
On cpu architectures w/o dma cache snooping, dma_unmap() is a is a very expensive operation, because its resulting sync needs to invalidate cpu caches. Increase efficiency/performance by syncing only those sections of the lan743x's rx ring buffers that are actually in use. Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16lan743x: boost performance on cpu archs w/o dma cache snoopingSven Van Asbroeck
The buffers in the lan743x driver's receive ring are always 9K, even when the largest packet that can be received (the mtu) is much smaller. This performs particularly badly on cpu archs without dma cache snooping (such as ARM): each received packet results in a 9K dma_{map|unmap} operation, which is very expensive because cpu caches need to be invalidated. Careful measurement of the driver rx path on armv7 reveals that the cpu spends the majority of its time waiting for cache invalidation. Optimize by keeping the rx ring buffer size as close as possible to the mtu. This limits the amount of cache that requires invalidation. This optimization would normally force us to re-allocate all ring buffers when the mtu is changed - a disruptive event, because it can only happen when the network interface is down. Remove the need to re-allocate all ring buffers by adding support for multi-buffer frames. Now any combination of mtu and ring buffer size will work. When the mtu changes from mtu1 to mtu2, consumed buffers of size mtu1 are lazily replaced by newly allocated buffers of size mtu2. These optimizations double the rx performance on armv7. Third parties report 3x rx speedup on armv8. Tested with iperf3 on a freescale imx6qp + lan7430, both sides set to mtu 1500 bytes, measure rx performance: Before: [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-20.00 sec 550 MBytes 231 Mbits/sec 0 After: [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-20.00 sec 1.33 GBytes 570 Mbits/sec 0 Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: enetc: fix destroyed phylink dereference during unbindVladimir Oltean
The following call path suggests that calling unregister_netdev on an interface that is up will first bring it down. enetc_pf_remove -> unregister_netdev -> unregister_netdevice_queue -> unregister_netdevice_many -> dev_close_many -> __dev_close_many -> enetc_close -> enetc_stop -> phylink_stop However, enetc first destroys the phylink instance, then calls unregister_netdev. This is already dissimilar to the setup (and error path teardown path) from enetc_pf_probe, but more than that, it is buggy because it is invalid to call phylink_stop after phylink_destroy. So let's first unregister the netdev (and let the .ndo_stop events consume themselves), then destroy the phylink instance, then free the netdev. Fixes: 71b77a7a27a3 ("enetc: Migrate to PHYLINK and PCS_LYNX") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: mvneta: Implement mqprio supportMaxime Chevallier
Implement a basic MQPrio support, inserting rules in RX that translate the TC to prio mapping into vlan prio to queues. The TX logic stays the same as when we don't offload the qdisc. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: mvneta: Remove per-cpu queue mapping for Armada 3700Maxime Chevallier
According to Errata #23 "The per-CPU GbE interrupt is limited to Core 0", we can't use the per-cpu interrupt mechanism on the Armada 3700 familly. This is correctly checked for RSS configuration, but the initial queue mapping is still done by having the queues spread across all the CPUs in the system, both in the init path and in the cpu_hotplug path. Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC") Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16Merge branch 'mlx5-next' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux Saeed Mahameed says: ==================== pull-request: mlx5-next 2021-02-16 The patches in this pr are already submitted and reviewed through the netdev and rdma mailing lists. The series includes mlx5 HW bits and definitions for mlx5 real time clock translation and handling in the mlx5 driver clock module to enable and support such mode [1] [1] https://patchwork.kernel.org/project/netdevbpf/patch/20210212223042.449816-7-saeed@kernel.org/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16drivers: net: xilinx_emaclite: remove arch limitationGary Guo
The changes made in eccd540 is enough for xilinx_emaclite to run without problem on 64-bit systems. I have tested it on a Xilinx FPGA with RV64 softcore. The architecture limitation in Kconfig seems no longer necessary. A small change is included to print address with %lx instead of casting to int and print with %x. Signed-off-by: Gary Guo <gary@garyguo.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: dsa: felix: Add support for MRPHoratiu Vultur
Implement functions 'port_mrp_add', 'port_mrp_del', 'port_mrp_add_ring_role' and 'port_mrp_del_ring_role' to call the mrp functions from ocelot. Also all MRP frames that arrive to CPU on queue number OCELOT_MRP_CPUQ will be forward by the SW. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: mscc: ocelot: Add support for MRPHoratiu Vultur
Add basic support for MRP. The HW will just trap all MRP frames on the ring ports to CPU and allow the SW to process them. In this way it is possible to for this node to behave both as MRM and MRC. Current limitations are: - it doesn't support Interconnect roles. - it supports only a single ring. - the HW should be able to do forwarding of MRP Test frames so the SW will not need to do this. So it would be able to have the role MRC without SW support. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: marvell: Ensure SGMII auto-negotiation is enabled for 88E1111Robert Hancock
When 88E1111 is operating in SGMII mode, auto-negotiation should be enabled on the SGMII side so that the link will come up properly with PCSes which normally have auto-negotiation enabled. This is normally the case when the PHY defaults to SGMII mode at power-up, however if we switched it from some other mode like 1000Base-X, as may happen in some SFP module situations, it may not be, particularly for modules which have 1000Base-X auto-negotiation defaulting to disabled. Call genphy_check_and_restart_aneg on the fiber page to ensure that auto- negotiation is properly enabled on the SGMII interface. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16sfp: add support for 5gbase-t SFPsMarek Behún
The sfp_parse_support() function is setting 5000baseT_Full in some cases. Now that we have PHY_INTERFACE_MODE_5GBASER interface mode available, change sfp_select_interface() to return PHY_INTERFACE_MODE_5GBASER if 5000baseT_Full is set in the link mode mask. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phylink: Add 5gbase-r supportMarek Behún
Add 5GBASER interface type and speed to phylink. Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16tg3: Remove unused PHY_BRCM flagsFlorian Fainelli
The tg3 driver tried to communicate towards the PHY driver whether it wanted RGMII in-band signaling enabled or disabled however there is nothing that looks at those flags in drivers/net/phy/broadcom.c so this does do not anything. Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: amd-xgbe: Fix network fluctuations when using 1G BELFUSE SFPShyam Sundar S K
Frequent link up/down events can happen when a Bel Fuse SFP part is connected to the amd-xgbe device. Try to avoid the frequent link issues by resetting the PHY as documented in Bel Fuse SFP datasheets. Fixes: e722ec82374b ("amd-xgbe: Update the BelFuse quirk to support SGMII") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: amd-xgbe: Reset link when the link never comes backShyam Sundar S K
Normally, auto negotiation and reconnect should be automatically done by the hardware. But there seems to be an issue where auto negotiation has to be restarted manually. This happens because of link training and so even though still connected to the partner the link never "comes back". This needs an auto-negotiation restart. Also, a change in xgbe-mdio is needed to get ethtool to recognize the link down and get the link change message. This change is only required in a backplane connection mode. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: amd-xgbe: Fix NETDEV WATCHDOG transmit queue timeout warningShyam Sundar S K
The current driver calls netif_carrier_off() late in the link tear down which can result in a netdev watchdog timeout. Calling netif_carrier_off() immediately after netif_tx_stop_all_queues() avoids the warning. ------------[ cut here ]------------ NETDEV WATCHDOG: enp3s0f2 (amd-xgbe): transmit queue 0 timed out WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:461 dev_watchdog+0x20d/0x220 Modules linked in: amd_xgbe(E) amd-xgbe 0000:03:00.2 enp3s0f2: Link is Down CPU: 3 PID: 0 Comm: swapper/3 Tainted: G E Hardware name: AMD Bilby-RV2/Bilby-RV2, BIOS RBB1202A 10/18/2019 RIP: 0010:dev_watchdog+0x20d/0x220 Code: 00 49 63 4e e0 eb 92 4c 89 e7 c6 05 c6 e2 c1 00 01 e8 e7 ce fc ff 89 d9 48 RSP: 0018:ffff90cfc28c3e88 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff90cfc28d63c0 RBP: ffff90cfb977845c R08: 0000000000000050 R09: 0000000000196018 R10: ffff90cfc28c3ef8 R11: 0000000000000000 R12: ffff90cfb9778000 R13: 0000000000000003 R14: ffff90cfb9778480 R15: 0000000000000010 FS: 0000000000000000(0000) GS:ffff90cfc28c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f240ff2d9d0 CR3: 00000001e3e0a000 CR4: 00000000003406e0 Call Trace: <IRQ> ? pfifo_fast_reset+0x100/0x100 call_timer_fn+0x2b/0x130 run_timer_softirq+0x3e8/0x440 ? enqueue_hrtimer+0x39/0x90 Fixes: e722ec82374b ("amd-xgbe: Update the BelFuse quirk to support SGMII") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: amd-xgbe: Reset the PHY rx data path when mailbox command timeoutShyam Sundar S K
Sometimes mailbox commands timeout when the RX data path becomes unresponsive. This prevents the submission of new mailbox commands to DXIO. This patch identifies the timeout and resets the RX data path so that the next message can be submitted properly. Fixes: 549b32af9f7c ("amd-xgbe: Simplify mailbox interface rate change code") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: mscc: coma mode disabled for VSC8514Bjarni Jonasson
The 'coma mode' (configurable through sw or hw) provides an optional feature that may be used to control when the PHYs become active. The typical usage is to synchronize the link-up time across all PHY instances. This patch releases coma mode if not done by hardware, otherwise the phys will not link-up. Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.") Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: mscc: improved serdes calibration applied to VSC8514Bjarni Jonasson
The current IB serdes calibration algorithm (performed by the onboard 8051) has proven to be unstable for the VSC8514 QSGMII phy. A new algorithm has been developed based on 'Frequency-offset Jittered-Injection' or 'FoJi' method which solves all known issues. This patch disables the 8051 algorithm and replaces it with the new FoJi algorithm. The calibration is now performed in a new file (mscc_serdes.c), which can act as an placeholder for future serdes configurations. Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.") Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: mscc: adding LCPLL reset to VSC8514Bjarni Jonasson
At Power-On Reset, transients may cause the LCPLL to lock onto a clock that is momentarily unstable. This is normally seen in QSGMII setups where the higher speed 6G SerDes is being used. This patch adds an initial LCPLL Reset to the PHY (first instance) to avoid this issue. Fixes: e4f9ba642f0b ("net: phy: mscc: add support for VSC8514 PHY.") Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com> Signed-off-by: Bjarni Jonasson <bjarni.jonasson@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net/mlx5: Add cyc2time HW translation mode supportAya Levin
Device timestamp can be in real time mode (cycles to time translation is offloaded into the Hardware). With real time mode, HW provides timestamp which is already translated into nanoseconds. With this mode, driver adjusts both the HW and timecounter (to keep clock_info_page updated) using callbacks: adjfreq, adjtime and settime. HW clock modifications are done via MTUTC access reg commands. Driver is allowed to modify HW real time clock only if MCAM ptpcyc2realtime_modify capability is set. Add MTUTC set function to be used for configuring the HW real time clock. Modify existing code to support both internal timer (with conversion via timecounter_cyc2time() and real time (no conversions). Align the signatures of the helpers converting from timestamp to nanoseconds. With that, when allocating a queue assign the corresponding callback with respect to the capability. Adjust 1PPS timestamp calculation flows based on the timestamp mode. Cyc2time offload brings two major advantages: - Improve MTAE (Max Time Absolute Error) for HW TS by up to 160 ns over a 100% loaded CPU. - Faster data-path timestamp to nanoseconds, as translation is lock-less and done in HW. On real time mode, timestamp format is 32 high bits of seconds and 32 low bits of nanoseconds. On some flows, driver shall convert this format into nanoseconds wall-clock with REAL_TIME_TO_NS macro. HW supports a single clock, and it is shared by all functions on a device. In case real time clock is used, it is recommended to use a single GM to all device's functions. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 00:09:45 +0000