summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2011-05-16be2net: FW download for LancerShripad Nunjundarao
Added implementation of FW download feature for Lancer. Signed-off-by: Shripad Nunjundarao <shripad.nunjundarao@emulex.com> Signed-off-by: Sevin Xavier <selvin.xavier@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16be2net: Stats for LancerSelvin Xavier
Added Lancer stats implementation. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16be2net: Support for version 1 of stats for BE3Ajit Khaparde
Added support to get version 1 of the stats for BE3. Use old stats command for BE2. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16bnx2x: Allow ethtool to enable/disable loopback.Mahesh Bandewar
This patch updates the bnx2x_set_features() to handle loopback mode. When enabled; it sets internal-MAC loopback. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-15net: drivers: kill two unused macro definitionsShan Wei
Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-14ixgbe: Add support for new 82599 adapterDon Skidmore
This patch adds support for a new adapter in the 82599 family. Included in that support is a new media_type ixgbe_media_type_fiber_lco. Signed-of-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: fix sparse warningEmil Tantilov
error: bad constant expression Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: cleanup some minor issues in ixgbe_down()Alexander Duyck
This patch cleans up two minor issues in ixgbe_down. Specifically it addresses the fact that the VFs should not be pinged until after interrupts are disabled otherwise they might still get a response. It also drops the use of the txdctl temporary variable since the only bit we should be writing to the TXDCTL registers during a shutdown is the flush bit. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Merge over-temp task into service taskAlexander Duyck
This change merges the over-temp task into the service task. As a result all tasklets are finally combined into once single tasklet for easier management. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Merge ATR reinit into the service taskAlexander Duyck
This change merges the ATR table reinitialization into the service task. This is yet another opportunity to avoid any race conditions as we don't want to be attempting to reinitialize the table during a possible reset. In addition this change adds a counter for table reinitialization so that it can be tracked as part of the regular statistics. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: merge reset task into service taskAlexander Duyck
This change is meant to further help to reduce possible configuration collisions between the various tasklets. This change combines the device reset with the service task. As a result it is now not possible to be updating the link on the device while also resetting the part. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Merge watchdog functionality into service taskAlexander Duyck
This patch is meant to merge the functionality of the ixgbe watchdog task into the service task. By doing this all link state functionality will be controlled by a single task. As a result the reliability of the interface will be improved as the likelihood of any race conditions is further reduced. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Combine SFP and multi-speed fiber task into single service taskAlexander Duyck
This change is meant to address several race conditions with multi-speed fiber SFP+ modules in 82599 adapters. Specifically issues have been seen in which both the SFP configuration and the multi-speed fiber configuration are running simultaneously which will result in the device getting into an erroneous link down state. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: move flags and state into the same cachelineAlexander Duyck
This change moves flags and state into the same cacheline. The reason for this change is because both are frequently read around the same time and infrequently written. By combining them into the same cacheline this should help to reduce memory utilization. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: force unlock on timeoutEmil Tantilov
The semaphore can be in locked state upon driver load, particularly on 82598 if a machine is rebooted due to panic and the semaphore was acquired just prior to the panic. This patch unlocks the semaphore if it times out. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbe: Add macvlan support for VFGreg Rose
Add infrastructure in the PF driver to support macvlan in the VF driver. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14ixgbevf: Add macvlan support in the set rx mode opGreg Rose
Implement setup of unicast address list in the VF driver's set_rx_mode netdev op. Unicast addresses are sent to the PF via a mailbox message and the PF will check if it has room in the RAR table and if so set the filter for the VF. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-14e1000e: minor comment cleanupsBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-05-13olympic: convert to seq_fileAlexey Dobriyan
->read_proc interface is going away, switch to seq_file. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13stmmac: fix autoneg in set_pauseparamGiuseppe CAVALLARO
This patch fixes a bug in the set_pauseparam function that didn't well manage the ANE field and returned broken values when use ethtool -A|-a. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13stmmac: don't go through ethtool to start auto-negotiationDavid Decotigny
The driver used to call phy's ethtool configuration routine to start auto-negotiation. This change has it call directly phy's routine to start auto-negotiation. The initial version was hiding phy_start_aneg() return value, this patch returns it (<0 upon error). Tested: module compiles, tested on STM HDK7108 STB. Signed-off-by: David Decotigny <decot@google.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13qlcnic: Bumped up version number to 5.0.18Anirban Chakraborty
Update driver version number Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13qlcnic: Take FW dump via ethtoolAnirban Chakraborty
Driver checks if the previous dump has been cleared before taking the dump. It doesn't take the dump if it is not cleared. Changes from v2: Added lock to protect dump data structures from being mangled while dumping or setting them via ethtool. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13qlcnic: FW dump supportAnirban Chakraborty
Added code to take FW dump. o Driver queries FW at the init time and gets the dump template o It takes FW dump as per the dump template o Level of FW dump (and its size) is configured via dump flag Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13be2net: fix mbox polling for signal receptionSathya Perla
Sending mbox cmds require multiple steps of writing to the DB register and polling for an ack. Gettting interrupted in the middle by a signal breaks the mbox protocol. Use msleep() to not get interrupted. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13be2net: handle signal reception while waiting for POSTSathya Perla
If waiting on POST returns prematurely (due to a signal), abort polling and return an error. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-12Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-next-2.6
2011-05-12bonding: convert to ndo_fix_featuresMichał Mirosław
This should also fix updating of vlan_features and propagating changes to VLAN devices on the bond. Side effect: it allows user to force-disable some offloads on the bond interface. Note: NETIF_F_VLAN_CHALLENGED is managed by bond_fix_features() now. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-12CDC NCM: Add mising short packet in cdc_ncm driverAlexey Orishko
Changes: - while making NTB, driver shall check if device dwNtbOutMaxSize is higher than host value and shall add a short packet if this is the case - previous temporary patch for this issue is replaced by this one Signed-off-by: Alexey Orishko <alexey.orishko@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-12tg3: Allow ethtool to enable/disable loopback.Mahesh Bandewar
This patch adds tg3_set_features() to handle loopback mode. Currently the capability is added for the devices which support internal MAC loopback mode. So when enabled, it enables internal-MAC loopback. Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-12vmxnet3: Use single tx queue when CONFIG_PCI_MSI not definedShreyas Bhatewara
Resending this patch with few changes. Avoid multiple queues when MSI or MSI-X not available Limit number of Tx queues to 1 if MSI/MSI-X support is not configured in the kernel. This will make number of tx and rx queues equal when MSI/X is not configured thus providing better performance. Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-11be2net: Fix to prevent flooding of TX queuePadmanabh Ratnakar
Start/stop TX queue is controlled by TX queue "used" counter. It is incremented while WRBs are posted to TX queue and decremented when TX completions are received. This counter was getting decremented before HW is informed about processing of TX completions. As used counter is decremented, transmit function posts new WRBs and creates completion queue full scenario in HW. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-11be2net: Use NTWK_RX_FILTER command for promiscous modePadmanabh Ratnakar
Use OPCODE_COMMON_NTWK_RX_FILTER command for promiscous mode as OPCODE_ETH_PROMISCUOUS command is getting deprecated. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-11be2net: In case of UE, do not dump registers for LancerPadmanabh Ratnakar
In case of UE, do not dump registers for Lancer as they are not supported. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-11be2net: Disable coalesce water mark mode of CQ for LancerPadmanabh Ratnakar
Disable coalesce water mark mode of CQ for Lancer Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-11be2net: Handle error completion in LancerPadmanabh Ratnakar
In Lancer if a frame is DMAed partially due to lack of RX buffers, an error completion is sent with packet size as zero and num_recvd indicating number of used buffers. These buffers need to be freed and packet dropped. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-3.6 Conflicts: drivers/net/benet/be_main.c
2011-05-10slcan: fix ldisc->open retvalOliver Hartkopp
TTY layer expects 0 if the ldisc->open operation succeeded. Reported-by: Matvejchikov Ilya <matvejchikov@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-10net/usb: mark LG VL600 LTE modem ethernet interface as WWANDan Williams
Like other mobile broadband device ethernet interfaces, mark the LG VL600 with the 'wwan' devtype so userspace knows it needs additional configuration via the AT port before the interface can be used. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09tulip: Use pr_<level> where appropriateJoe Perches
Use the current logging styles. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09tulip: Convert uses of KERN_DEBUGJoe Perches
Convert logging messages to more current styles. Added -DDEBUG to Makefile to maintain current message logging. This could be converted to a specific CONFIG_TULIP_DEBUG option. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09tulip: Convert printks to netdev_<level>Joe Perches
Use the current more descriptive logging styles. Add pr_fmt and remove PFX where appropriate. Use netif_<level>, netdev_<level> Indent a few blocks in xircom_cb where appropriate. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09tulip: xircom_cb: Convert #ifdef DEBUG blocks and enter/leave usesJoe Perches
Change the blocks that are guarded by #if DEBUG to be #if defined DEBUG && DEBUG > 1 so that pr_debug can be used later. Remove enter/leave macros and uses. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09Merge branch 'davem-next.r8169' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6
2011-05-09pch_gbe: support ML7223 IOHTomoya
Support new device OKI SEMICONDUCTOR ML7223 IOH(Input/Output Hub). The ML7223 IOH is for MP(Media Phone) use. The ML7223 is companion chip for Intel Atom E6xx series. The ML7223 is completely compatible for Intel EG20T PCH. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09net: add mac_pton() for parsing MAC addressAlexey Dobriyan
mac_pton() parses MAC address in form XX:XX:XX:XX:XX:XX and only in that form. mac_pton() doesn't dirty result until it's sure string representation is valid. mac_pton() doesn't care about characters _after_ last octet, it's up to caller to deal with it. mac_pton() diverges from 0/-E return value convention. Target usage: if (!mac_pton(str, whatever->mac)) return -EINVAL; /* ->mac being u8 [ETH_ALEN] is filled at this point. */ /* optionally check str[3 * ETH_ALEN - 1] for termination */ Use mac_pton() in pktgen and netconsole for start. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09netconsole: switch to kstrto*() functionsAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09net: bonding: factor out rlock(bond->lock) in xmit pathMichał Mirosław
Pull read_lock(&bond->lock) and BOND_IS_OK() to bond_start_xmit() from mode-dependent xmit functions. netif_running() is always true in hard_start_xmit. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-09r8169: avoid late chip identifier initialisation.Francois Romieu
Unknown 8168 chips did not have any PLL power method set as they did not inherit a default family soon enough. Fix it. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
2011-05-09r8169: merge firmware information into the chipset description data.Francois Romieu
- RTL_GIGA_MAC_NONE is a fake index so put it at the end of the enumeration and shift everybody. - RTL_GIGA_MAC_VER_17 / RTL_GIGA_MAC_VER_16 ordering fixed. Though not wrong it was confusing enough to wonder if things were right. Renaming rtl_chip_info was not strictly necessary. It allows to check the patch for the correct use of the indexes though. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 04:50:41 +0000