summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2012-04-12wlcore/wl12xx: implement chip-specific partition tablesLuciano Coelho
Add partition tables to wlcore, move and reorganize partition setting functions. Move wl12xx partition table to use the wlcore partition table instead. Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12wl12xx/wlcore: move wl1271 struct to wlcore and add opsLuciano Coelho
In order to add chip-specific operations and prepare for future elements that need to be set by the lower driver, move the wl1271 structure to the wlcore.h file and add an empty placeholder for the operations structure. Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12wl12xx/wlcore: initial split of probeLuciano Coelho
We need to set some parameters (eg. partition and register tables) during probe of the lower driver, so split the probe function, leaving most of it in wlcore, but moving the hw struct allocation to the lower driver. Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12wl12xx/wlcore: spin out the wl12xx probe from wlcore to a new wl12xxLuciano Coelho
Create a new small wl12xx module that only contains the probe functions and depends entirely on wlcore otherwise. Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12wl12xx/wlcore: rename wl12xx to wlcoreLuciano Coelho
Rename the wl12xx driver directory to wlcore as an initial step towards the split of the driver into wlcore and wl12xx. We just rename the directory first to keep git blame happy. Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-12wireless/wl12xx/wl1251: move TI WLAN modules to a common ti subdirectoryLuciano Coelho
Move wl12xx and wl1251 modules into a new drivers/net/wireless/ti directory. Add a TI WLAN Kconfig option and Makefile to support this change. Signed-off-by: Luciano Coelho <coelho@ti.com> Cc: John W. Linville <linville@tuxdriver.com>
2012-04-10wl12xx: increase scan timeout to 30sEyal Shapira
In certain scenarios involving sched scan + normal scan + COEX scan could take longer than 10s and this triggers a recovery where it shouldn't. Increase the timeout to avoid that. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-10wl12xx: adaptive sched scan dwell timesEyal Shapira
Set the dwell times for sched scan according to the number of probe requests which are going to be transmitted. This should fix the too short dwell time problem which prevented some of the probe requests from being transmitted in cases of high number of SSIDs (10+) to be actively sched scanned. However, in the common case of having up to 1-2 SSIDs that require active scan, the dwell time would be kept to a minimum which should conserve power. This is important as sched scan also runs periodically while the host is suspended and there's great importance to keep power consumption as low as possible. Signed-off-by: Eyal Shapira <eyal@wizery.com> [fixed a couple of new strict checkpatch warnings] Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-10wl12xx: fix a memory leak of probereq template upon recoveryEyal Shapira
wlvif->probereq is zeroed when adding an interface but the skb pointed to isn't freed when the interface is removed. This would lead to a mem leak on every recovery. Fix it by freeing the skb when removing the interface. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-10wl12xx: free ap keys only in ap modeEliad Peller
The ap keys should be freed only when removing ap role (otherwise, some arbitrary data might get freed). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-10wl12xx: fix DMA-API-related warningsMircea Gherzan
On the PandaBoard (omap_hsmmc + wl12xx_sdio) with DMA_API_DEBUG: WARNING: at lib/dma-debug.c:930 check_for_stack.part.8+0x7c/0xe0() omap_hsmmc omap_hsmmc.4: DMA-API: device driver maps memory fromstack Signed-off-by: Mircea Gherzan <mgherzan@gmail.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-10wl12xx: fix race between suspend/resume and recoveryEyal Shapira
The iteration on the wlvif list in wl1271_op_resume/suspend was perfomed before locking wl->mutex which would lead to a kernel panic in case a recovery was queued at the same time and would delete the wlvifs from the list. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-10wl12xx: fix station channel switchVictor Goldenshtein
Channel switch complete event wasn't handled properly in station mode, as we checked wrong CS flag. Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-10wl12xx: set do_join on BSS_CHANGED_ASSOCEliad Peller
wl12xx sets the do_join flag (which later starts the sta role) when the bssid was changed and the sta is associated. However, this no longer happens after the "mac80211: remove spurious BSSID change flag" patch. Fix it by setting the do_join flag on BSS_CHANGED_ASSOC (for IBSS, do_join is already set on BSS_CHANGED_IBSS) Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-04-09iwlwifi: split POWER_PMI status bitDon Fry
Move the POWER_PMI to the op_mode where it is changed. The trans needs to check it frequently, so shadow the status in the trans and update it in trans when it infrequently changes. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: move FW_ERROR to privDon Fry
The op_mode should check for FW_ERROR before calling send_cmd. This removes the need to test for FW_ERROR in the trans layer. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: remove firmware info from iwl_sharedMeenakshi Venkataraman
With error logging now completely handled in the op_mode, the transport layer does not need to know information about the loaded firmware. Remove this state information from the iwl_shared data structure. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: move iwl_get_single_channel_number and mark it staticMeenakshi Venkataraman
iwl_get_single_channel_number is used only in iwl-scan.c, move it there and mark it static. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: move iwl_full_rxon_required and mark it staticMeenakshi Venkataraman
iwl_full_rxon_required is used only in iwl-agn-rxon.c. Move it there and mark it static. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: move iwl_check_rxon_cmd and mark it staticMeenakshi Venkataraman
iwl_check_rxon_cmd is used only in iwl-agn-rxon.c. Move it there and mark it static. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: move iwl_set_rxon_hwcrypto and mark it staticMeenakshi Venkataraman
iwl_set_rxon_hwcrypto is used only in iwl-agn-rxon.c. Move it there and mark it static. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: Move iwl_send_rxon_timing and make it staticMeenakshi Venkataraman
iwl_send_rxon_timing is used only in iwl-agn-rxon.c, move it there and mark it static. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: move iwl_init_geos to iwl-agn.cMeenakshi Venkataraman
This is used only in one file, move it there and make it static. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: move ucode_type from shared to op_modeMeenakshi Venkataraman
This variable holds the ucode currently running on the device; which is determined by op_mode, so move this parameter there. Also, the name of the variable is a bit misleading, so rename it to cur_ucode. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: move ucode error log reporting to op_modeMeenakshi Venkataraman
Error log reporting does not belong to the transport layer, but to the op_mode loading the ucode, as it is the entity which knows about the ucode loaded, and what the error information means. Move device logging pointers from the transport layer to op_mode. With this change, transport layer only reports an error to the op_mode, which will figure out what to do with the error. This causes the driver to now dump out error logs when the command queue is stuck as well. Also, move the debugfs entry for event logs out of the transport layer and into op_mode. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: make iwl_nic_error staticMeenakshi Venkataraman
iwl_nic_error is used in iwl-agn.c only, move it there and make it static. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: use iwlagn_fw_error instead of iwl_nic_errorMeenakshi Venkataraman
In the process, make iwlagn_fw_error a non-static function, as it is used by more than one file. Signed-off-by: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: move valid_contexts to privJohannes Berg
No other component is accessing it any more, so it can move to the correct place in priv. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: move queue mapping out of transportJohannes Berg
The queue mapping is not only dynamic, it is also dependent on the uCode, as we can already see today with the dual-mode and non-dual-mode being different. Move the queue mapping out of the transport layer and let the higher layer manage it. Part of the transport configuration is how to set up the queues. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: use scan while idleJohannes Berg
As idle is just a deep powersave mode for the device, it will easily scan while idle since that turns off powersave. This reduces the number of commands sent to the device when scanning. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: remove scan_rx_antennasJohannes Berg
This is not (no longer?) used by any device so just remove it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: remove iq_invert config paramJohannes Berg
This is used only by 2000 class devices, but they all use it so remove the configuration parameter and hard-code the programming. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: remove support_wimax_coexistJohannes Berg
There's no device using this mechanism. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: clarify config struct commentsJohannes Berg
It talks about treating different uCode APIs as different pieces of hardware which really isn't how we handle things. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: add trailing newline to various messagesJohannes Berg
A whole bunch of messages, even some recent ones, didn't include a trailing newline so add it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: simplify calibration collectionJohannes Berg
The calibration results all come in while we're waiting for the calibration complete notification. As a consequence, there's no need to install a global RX handler for them, we can use the newly extended notification wait framework for this and make the code easier to follow. It is now quite explicit that we are processing the calibration results while waiting for the complete notification, before this was implicit and developers had to know this to understand why we wait for the calibration complete notification and what happens while we wait. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: extend notification waitJohannes Berg
Sometimes, for example when we ask the uCode for calibration, we wait for the "complete" response while we also need the results that are sent in other, interim, notifications. Currently we handle this by installing an RX handler globally, but that isn't needed as this is the only time we want to use these notifications. So in order to be able to simplify at least future code that does the same, extend the notification wait framework to allow you to wait for multiple commands and decide based on the command whether the wait finished. While at it, also fix a race that can then become relevant -- if the wait function has returned true once it shouldn't be called again, today this can happen due to races between the triggering and the wakeup. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: process multiple frames per RXBJohannes Berg
The flow handler (hardware) can put multiple frames into a single RX buffer. To handle this, walk the RX buffer and check if there are multiple valid packets in it. To let the upper layer handle this correctly introduce rxb_offset() which is needed when we pass pages to mac80211 -- we need to know the offset into the page there. Also change the page handling scheme to use refcounting. Anyone who needs a page will "steal" it, which marks it as having been used & refcounts it. The RX handler then has to free its own reference and must not reuse the page. Finally, do not set the bit asking the FH to give us each packet in a single buffer. This really enables the feature. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: remove un-needed parameterWey-Yi Guy
get rid of un-needed parameter Change-Id: I992741e7382a3dbced7f8413bf1d5f301029d576 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09iwlwifi: phy_db structureDavid Spinadel
Add iwl_phy_db structure and API. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09rtlwifi: Preallocate USB read buffers and eliminate kalloc in read routineLarry Finger
The current version of rtlwifi for USB operations uses kmalloc to acquire a 32-bit buffer for each read of the device. When _usb_read_sync() is called with the rcu_lock held, the result is a "sleeping function called from invalid context" BUG. This is reported for two cases in https://bugzilla.kernel.org/show_bug.cgi?id=42775. The first case has the lock originating from within rtlwifi and could be fixed by rearranging the locking; however, the second originates from within mac80211. The kmalloc() call is removed from _usb_read_sync() by creating a ring buffer pointer in the private area and allocating the buffer data in the probe routine. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [This version good for 3.3+ - different patch for 3.2 - 2.6.39] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09rt2x00: increase led's name buffer lengthJakub Kicinski
With 9-letter driver names phy's number was truncated to two characters, which caused warnings when creating sysfs entries for leds on systems with multiple devices. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Reviewed-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09rtlwifi: Simplify rtl_get/set inline functionsJoe Perches
Use a temporary to make the code a bit neater. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09rtlwifi: Use is_zero_ether_addr, remove line continuationJoe Perches
Use the normal kernel facilities and use %pM to print the all zero mac address. Remove unnecessary line continuation. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Larry.Finger@lwfinger.net Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09p54usb: Load firmware asynchronouslyLarry Finger
Drivers that load firmware from their probe routine have problems with the latest versions of udev as they get timeouts while waiting for user space to start. The problem is fixed by using request_firmware_nowait() and delaying the start of mac80211 until the firmware is loaded. To prevent the possibility of the driver being unloaded while the firmware loading callback is still active, a completion queue entry is used. Also, to simplify the firmware loading procedure, this patch removes the old, unofficial and confusing fallback firmware names. However, they are still supported! So any user - who is still using them - is hereby advised to link/rename their old firmware filenames: isl3890usb to isl3886usb isl3887usb_bare to isl3887usb Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09p54: only unregister ieee80211_hw when it has been registeredChristian Lamparter
p54_unregister_common may now be called by the backend driver's remove routine, even if the ieee80211_hw device struct was never successfully registered. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09mwifiex: add set_cqm_rssi_config handler supportAmitkumar Karwar
In this handler LOW_RSSI and HIGH_RSSI events are subscribed to FW using provided threshold value so that FW will monitor connection quality and trigger any of these events. Driver will notify cfg80211 about connection quality based on inputs from FW and provided hysteresis. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09mwifiex: support STATION_INFO_SIGNAL_AVGAmitkumar Karwar
This patch adds the support for updating average signal information in dump_station(). Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09mwifiex: remove redundant signal handling codeAmitkumar Karwar
1) The wrapper function mwifiex_get_signal_info() is unnecessary. 2) As noise and signal vaules in private structure already get modified, we don't need to explicitly pass "struct mwifiex_ds_get_signal" to get it filled. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-09mwifiex: add cfg80211 dump_station handlerAmitkumar Karwar
This enables user to dump station information using "iw dev <devname> station dump" command. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>