summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2016-09-22Merge tag 'linux-can-fixes-for-4.8-20160921' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-09-21 this is another pull request of one patch for the upcoming linux-4.8 release. Marek Vasut fixes the CAN-FD bit rate switch in the ifi driver by configuring the transmitter delay. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-22net/mlx4_core: Fix to clean devlink resourcesKamal Heib
This patch cleans devlink resources by calling devlink_port_unregister() to avoid the following issues: - Kernel panic when triggering reset flow. - Memory leak due to unfreed resources in mlx4_init_port_info(). Fixes: 09d4d087cd48 ("mlx4: Implement devlink interface") Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21Merge tag 'wireless-drivers-for-davem-2016-09-20' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.8 iwlwifi * fix to prevent firmware crash when sending off-channel frames ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21net: can: ifi: Configure transmitter delayMarek Vasut
Configure the transmitter delay register at +0x1c to correctly handle the CAN FD bitrate switch (BRS). This moves the SSP (secondary sample point) to a proper offset, so that the TDC mechanism works and won't generate error frames on the CAN link. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-09-21r8152: disable ALDPS and EEE before setting PHYhayeswang
Disable ALDPS and EEE to avoid the possible failure when setting the PHY. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21r8152: remove r8153_enable_eeehayeswang
Remove r8153_enable_eee(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21r8152: move PHY settings to hw_phy_cfghayeswang
Move the PHY relative settings together to hw_phy_cfg(). Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21r8152: move enabling PHYhayeswang
Move enabling PHY to init(), otherwise some other settings may fail. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21r8152: move some functionshayeswang
Move the following functions forward. r8152_mmd_indirect() r8152_mmd_read() r8152_mmd_write() r8152_eee_en() r8152b_enable_eee() r8153_eee_en() r8153_enable_eee() r8152b_enable_fc() r8153_aldps_en() Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-21cxgb4/cxgb4vf: Allocate more queues for 25G and 100G adapterHariprasad Shenai
We were missing check for 25G and 100G while checking port speed, which lead to less number of queues getting allocated for 25G & 100G adapters and leading to low throughput. Adding the missing check for both NIC and vNIC driver. Also fixes port advertisement for 25G and 100G in ethtool output. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20Merge tag 'linux-can-fixes-for-4.8-20160919' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-09-19 this is a pull request of one patch for the upcoming linux-4.8 release. The patch by Fabio Estevam fixes the pm handling in the flexcan driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20qed: Fix stack corruption on probeYuval Mintz
Commit fe56b9e6a8d95 ("qed: Add module with basic common support") has introduced a stack corruption during probe, where filling a local struct with data to be sent to management firmware is incorrectly filled; The data is written outside of the struct and corrupts the stack. Changes from v1: ---------------- - Correct the value written [Caught by David Laight] Fixes: fe56b9e6a8d95 ("qed: Add module with basic common support") Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19net/mlx5: E-Switch, Handle mode change failuresOr Gerlitz
E-switch mode changes involve creating HW tables, potentially allocating netdevices, etc, and things can fail. Add an attempt to rollback to the existing mode when changing to the new mode fails. Only if rollback fails, getting proper SRIOV functionality requires module unload or sriov disablement/enablement. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19net/mlx5: E-Switch, Fix error flow in the SRIOV e-switch init codeOr Gerlitz
When enablement of the SRIOV e-switch in certain mode (switchdev or legacy) fails, we must set the mode to none. Otherwise, we'll run into double free based crashes when further attempting to deal with the e-switch (such as when disabling sriov or unloading the driver). Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19net/mlx5: Fix flow counter bulk command out mailbox allocationRoi Dayan
The FW command output length should be only the length of struct mlx5_cmd_fc_bulk out field. Failing to do so will cause the memcpy call which is invoked later in the driver to write over wrong memory address and corrupt kernel memory which results in random crashes. This bug was found using the kernel address sanitizer (kasan). Fixes: a351a1b03bf1 ('net/mlx5: Introduce bulk reading of flow counters') Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-19can: flexcan: fix resume functionFabio Estevam
On a imx6ul-pico board the following error is seen during system suspend: dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110 PM: Device 2090000.flexcan failed to resume: error -110 The reason for this suspend error is because when the CAN interface is not active the clocks are disabled and then flexcan_chip_enable() will always fail due to a timeout error. In order to fix this issue, only call flexcan_chip_enable/disable() when the CAN interface is active. Based on a patch from Dong Aisheng in the NXP kernel. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-09-18stmmac: fix PWRDWN into the PMT register for global unicast.Giuseppe CAVALLARO
MAC devices use the RWKPKTEN and MGKPKTEN bits of the PMT Control/Status register to generate power management events. So this patch is to properly set the RWKPKTEN [BIT(2)] inside the PMT register (needed in case of global unicast). Reported-by: Aditi SHARMA <aditi-hed.sharma@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17bna: fix crash in bnad_get_strings()Ivan Vecera
Commit 6e7333d "net: add rx_nohandler stat counter" added the new entry rx_nohandler into struct rtnl_link_stats64. Unfortunately the bna driver foolishly depends on the structure. It uses part of it for ethtool statistics and it's not bad but the driver assumes its size is constant as it defines string for each existing entry. The problem occurs when the structure is extended because you need to modify bna driver as well. If not any attempt to retrieve ethtool statistics results in crash in bnad_get_strings(). The patch changes BNAD_ETHTOOL_STATS_NUM so it counts real number of strings in the array and also removes rtnl_link_stats64 entries that are not used in output and are always zero. Fixes: 6e7333d "net: add rx_nohandler stat counter" Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17bna: add missing per queue ethtool statIvan Vecera
Commit ba5ca784 "bna: check for dma mapping errors" added besides other things a statistic that counts number of DMA buffer mapping failures per each Rx queue. This counter is not included in ethtool stats output. Fixes: ba5ca784 "bna: check for dma mapping errors" Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-17Merge tag 'iwlwifi-for-kalle-2016-09-15' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * fix to prevent firmware crash when sending off-channel frames
2016-09-17xen-netback: fix error handling on netback_probe()Filipe Manco
In case of error during netback_probe() (e.g. an entry missing on the xenstore) netback_remove() is called on the new device, which will set the device backend state to XenbusStateClosed by calling set_backend_state(). However, the backend state wasn't initialized by netback_probe() at this point, which will cause and invalid transaction and set_backend_state() to BUG(). Initialize the backend state at the beginning of netback_probe() to XenbusStateInitialising, and create two new valid state transitions on set_backend_state(), from XenbusStateInitialising to XenbusStateClosed, and from XenbusStateInitialising to XenbusStateInitWait. Signed-off-by: Filipe Manco <filipe.manco@neclab.eu> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16nfp: fix error return code in nfp_net_netdev_open()Wei Yongjun
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 73725d9dfd99 ("nfp: allocate ring SW structs dynamically") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16net/ibm/emac: add mutex to 'set multicast list'Ivan Mikhaylov
for preventing race conditions within ioctl calls. Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16net/ibm/emac: add set mac addr callbackIvan Mikhaylov
add realization for mac address set and remove dummy callback. Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16net: ethernet: mediatek: fix module loading automatically based on ↵Sean Wang
MODULE_DEVICE_TABLE The device table is required to load modules based on modaliases. After adding MODULE_DEVICE_TABLE, below entries for example will be added to modules.alias: alias of:N*T*Cmediatek,mt7623-ethC* mtk_eth_soc Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16net/mlx4_en: fix off by one in error handlingSebastian Ott
If an error occurs in mlx4_init_eq_table the index used in the err_out_unmap label is one too big which results in a panic in mlx4_free_eq. This patch fixes the index in the error path. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-15iwlwifi: mvm: update TX queue before making a copy of the skbBeni Lev
Off-channel action frames (such as ANQP frames) must be sent either on the AUX queue or on the offchannel queue, otherwise the firmware will cause a SYSASSERT. In the current implementation, the queue to be used is correctly set in the original skb, but this is done after it is copied. Thus the copy remains with the original, incorrect queue. Fix this by setting the queue in the original skb before copying it. Fixes: commit 5c08b0f5026f ("iwlwifi: mvm: don't override the rate with the AMSDU len") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Beni Lev <beni.lev@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2016-09-13drivers: net: phy: xgene: Fix 'remove' functionChristophe Jaillet
If 'IS_ERR(pdata->clk)' is true, then 'clk_disable_unprepare(pdata->clk)' will do nothing. It is likely that 'if (!IS_ERR(pdata->clk))' was expected here. In fact, the test can even be removed because 'clk_disable_unprepare' already handles such cases. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-13bnx2: Reset device during driver initializationBaoquan He
When system enters into kdump kernel because of kernel panic, it won't shutdown devices. On-flight DMA will continue transferring data until device driver initializes. All devices are supposed to reset during driver initialization. And this property is used to fix the kdump failure in system with intel iommu. Other systems with hardware iommu should be similar. Please check commit 091d42e ("iommu/vt-d: Copy translation tables from old kernel") and those commits around. But bnx2 driver doesn't reset device during driver initialization. The device resetting is deferred to net device up stage. This will cause hardware iommu handling failure on bnx2 device. And its resetting relies on firmware. So in this patch move the firmware requesting code to earlier bnx2_init_one(), then next call bnx2_reset_chip to reset device. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-11net/mlx4_en: Fix panic on xmit while port is downMoshe Shemesh
When port is down, tx drop counter update is not needed. Updating the counter in this case can cause a kernel panic as when the port is down, ring can be NULL. Fixes: 63a664b7e92b ("net/mlx4_en: fix tx_dropped bug") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-11net/mlx4_en: Fixes for DCBXTariq Toukan
This patch adds a capability check before enabling DCBX. In addition, it re-organizes the relevant data structures, and fixes a typo in a define. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-11net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_state()Kamal Heib
mlx4_en_dcbnl_set_state() returns u8, the return value from mlx4_en_setup_tc() could be negative in case of failure, so fix that. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-11net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_all()Kamal Heib
mlx4_en_dcbnl_set_all() returns u8, so return value can't be negative in case of failure. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Rana Shahout <ranas@mellanox.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-10net: ethernet: renesas: sh_eth: add POST registers for rzChris Brandt
Due to a mistake in the hardware manual, the FWSLC and POST1-4 registers were not documented and left out of the driver for RZ/A making the CAM feature non-operational. Additionally, when the offset values for POST1-4 are left blank, the driver attempts to set them using an offset of 0xFFFF which can cause a memory corruption or panic. This patch fixes the panic and properly enables CAM. Reported-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09drivers: net: phy: mdio-xgene: Add hardware dependencyJean Delvare
The mdio-xgene driver is only useful on X-Gene SoC. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Iyappan Subramanian <isubramanian@apm.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09Merge tag 'wireless-drivers-for-davem-2016-09-08' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.8 iwlwifi * fix P2P dump trigger * prevent a potential null dereference in iwlmvm * prevent an uninitialized value from being returned in iwlmvm * advertise support for channel width change in AP mode ath10k * fix racy rx status retrieval from htt context * QCA9887 support is not experimental anymore, remove the warning message ath9k * fix regression with led GPIOs * fix AR5416 GPIO access warning brcmfmac * avoid potential stack overflow in brcmf_cfg80211_start_ap() ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09dwc_eth_qos: do not register semi-initialized deviceLars Persson
We move register_netdev() to the end of dwceqos_probe() to close any races where the netdev callbacks are called before the initialization has finished. Reported-by: Pavel Andrianov <andrianov@ispras.ru> Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09mlxsw: spectrum: Set port type before setting its addressIdo Schimmel
During port init, we currently set the port's type to Ethernet after setting its MAC address. However, the hardware documentation states this should be the other way around. Align the driver with the hardware documentation and set the port's MAC address after setting its type. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-09mlxsw: spectrum_router: Fix error path in mlxsw_sp_router_initJiri Pirko
When neigh_init fails, we have to do proper cleanup including router_fini call. Fixes: 6cf3c971dc84cb ("mlxsw: spectrum_router: Add private neigh table") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08nfp: don't pad frames on receiveJakub Kicinski
There is no need to pad frames to ETH_ZLEN on RX. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08nfp: drop support for old firmware ABIsJakub Kicinski
Be more strict about FW versions. Drop support for old transitional revisions which were never used in production. Dropping support for FW ABI version 0.0.0.0 is particularly useful because 0 could just be uninitialized memory. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08nfp: remove linux/version.h includesJakub Kicinski
Remove unnecessary version.h includes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08net/mlx5e: Fix parsing of vlan packets when updating lro headerGal Pressman
Currently vlan tagged packets were not parsed correctly and assumed to be regular IPv4/IPv6 packets. We should check for 802.1Q/802.1ad tags and update the lro header accordingly. This fixes the use case where LRO is on and rxvlan is off (vlan stripping is off). Fixes: e586b3b0baee ('net/mlx5: Ethernet Datapath files') Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08net/mlx5e: Fix global PFC counters replicationGal Pressman
Currently when reading global PFC statistics we left the counter iterator out of the equation and we ended up reading the same counter over and over again. Instead of reading the counter at index 0 on every iteration we now read the counter at index (i). Fixes: e989d5a532ce ('net/mlx5e: Expose flow control counters to ethtool') Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08net/mlx5e: Prevent casting overflowGal Pressman
On 64 bits architectures unsigned long is longer than u32, casting to unsigned long will result in overflow. We need to first allocate an unsigned long variable, then assign the wanted value. Fixes: 665bc53969d7 ('net/mlx5e: Use new ethtool get/set link ksettings API') Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-08net/mlx5e: Fix xmit_more counter race issueTariq Toukan
Update the xmit_more counter before notifying the HW, to prevent a possible use-after-free of the skb. Fixes: c8cf78fe100b ("net/mlx5e: Add ethtool counter for TX xmit_more") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-07Merge ath-current from ath.gitKalle Valo
ath.git fixes for 4.8. Major changes: ath10k * fix racy rx status retrieval from htt context * QCA9887 support is not experimental anymore, remove the warning message ath9k * fix regression with led GPIOs * fix AR5416 GPIO access warning
2016-09-07brcmfmac: avoid potential stack overflow in brcmf_cfg80211_start_ap()Arend Van Spriel
User-space can choose to omit NL80211_ATTR_SSID and only provide raw IE TLV data. When doing so it can provide SSID IE with length exceeding the allowed size. The driver further processes this IE copying it into a local variable without checking the length. Hence stack can be corrupted and used as exploit. Cc: stable@vger.kernel.org # v4.7 Reported-by: Daxing Guo <freener.gdx@gmail.com> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-07ath9k: bring back direction setting in ath9k_{start_stop}Giedrius Statkevičius
A regression was introduced in commit id 79d4db1214a ("ath9k: cleanup led_pin initial") that broken the WLAN status led on my laptop with AR9287 after suspending and resuming. Steps to reproduce: * Suspend (laptop) * Resume (laptop) * Observe that the WLAN led no longer turns ON/OFF depending on the status and is always red Even though for my case it only needs to be set to OUT in ath9k_start but for consistency bring back the IN direction setting as well. Fixes: 79d4db1214a0 ("ath9k: cleanup led_pin initial") Cc: Miaoqing Pan <miaoqing@codeaurora.org> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: <stable@vger.kernel.org> # 4.7+ Link: https://bugzilla.kernel.org/show_bug.cgi?id=151711 Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com> [kvalo@qca.qualcomm.com: improve commit log] Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-06bnxt_en: Fix TX push operation on ARM64.Michael Chan
There is a code path where we are calling __iowrite64_copy() on an address that is not 64-bit aligned. This causes an exception on some architectures such as arm64. Fix that code path by using __iowrite32_copy(). Reported-by: JD Zheng <jiandong.zheng@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-17 18:46:45 +0000