summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2018-09-12net: phy: bcm63xx: Allow to be built with COMPILE_TESTAndrew Lunn
There is nothing in this driver which prevents it to be compiled for other architectures. Add COMPILE_TEST so we get better compile test coverage. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: phy: et1011c: Remove incorrect missing 1000 HalfAndrew Lunn
The driver indicates it can do 10/100 full and half duplex, plus 1G Full. The datasheet indicates 1G half is also supported. So make use of the standard PHY_GBIT_FEATURES. It could be, this was added because there is a MAC which does not support 1G half. Bit this is the wrong place to enforce this. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: phy: ste10Xp: Remove wrong SUPPORTED_PauseAndrew Lunn
The PHY driver should not indicate that Pause is supported. It is upto the MAC drive enable it, if it supports Pause frames. So remove it from the ste10Xp driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12nfp: report FW vNIC stats in interface statsJakub Kicinski
Report in standard netdev stats drops and errors as well as RX multicast from the FW vNIC counters. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: dsa: b53: Only call b53_port_event() for SGMII portsFlorian Fainelli
Built-in PHY ports are still being polled, avoid generating spurious and duplicate events which the PHY library resolves through polling anyways. Fixes: 0e01491de646 ("net: dsa: b53: Add SerDes support") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11net: aquantia: bump driver versionIgor Russkikh
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11net: aquantia: renaming for better visibilityNikita Danilov
Removed extra characters from the names of structures to unify prefixes used through the driver code (we normally use hw_atl for hw specifics). HW_ATL_B0_ and HW_ATL_A0_ are the same and useless copies. Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11net: aquantia: whitespace changesNikita Danilov
Removed extra spaces, corrected alignment. Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11net: aquantia: implement EEE supportYana Esina
Support of Energy-Efficient Ethernet to aQuantia NIC's via ethtool (according to the IEEE 802.3az specifications) Signed-off-by: Yana Esina <yana.esina@aquantia.com> Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Tested-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11net: aquantia: implement WOL supportYana Esina
Add WOL support. Currently only magic packet (ethtool -s <ethX> wol g) feature is implemented. Remove hw_set_power and move that to FW_OPS set_power: because WOL configuration behaves differently on 1x and 2x firmwares Signed-off-by: Yana Esina <yana.esina@aquantia.com> Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Tested-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11net: aquantia: definitions for WOLYana Esina
Added definitions and structures needed to support WOL. Signed-off-by: Yana Esina <yana.esina@aquantia.com> Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Tested-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11net: aquantia: fix hw_atl_utils_fw_upload_dwordsYana Esina
This patch fixes the upload function, which worked incorrectly with some chips. Signed-off-by: Yana Esina <yana.esina@aquantia.com> Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Tested-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11liquidio: Removed droq lockIntiyaz Basha
With the changes in patch 1 and 2, droq lock is not required. So removing droq lock. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11liquidio: Per queue oom work queueIntiyaz Basha
Removed oom task unconditional rescheduling every 250ms and created per queue oom work queue for refilling buffers. The oom task refills only if the available descriptors is fallen to 64. There will be no packets coming in after hitting this level. So NAPI will not run until oom task refills the buffers. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11liquidio: Disabling tasklet when NAPI is activeIntiyaz Basha
Control packets are processed in tasklet when interface is down and in NAPI when interface is up. So tasklet can be disabled when interface up and re-enabled when interface is down. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11xen-netback: remove unecessary condition check before debugfs_remove_recursivezhong jiang
debugfs_remove_recursive has taken IS_ERR_OR_NULL into account. So just remove the condition check before debugfs_remove_recursive. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11net: xenbus: remove redundant condition check before debugfs_remove_recursivezhong jiang
debugfs_remove_recursive has taken the IS_ERR_OR_NULL into account. Just remove the unnecessary condition check. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-11net: dsa: b53: Uninitialized variable in b53_adjust_link()Dan Carpenter
The "pause" variable is only initialized on BCM5301x. Fixes: 5e004460f874 ("net: dsa: b53: Add helper to set link parameters") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-10rtl818x: Remove SKB list assumptions.David S. Miller
Eliminate the assumption that SKBs and SKB list heads can be cast to eachother in SKB list handling code. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-10can: Remove SKB list assumptions in rx-offload.cDavid S. Miller
Eliminate code which assumes that SKBs and skb_queue_head objects can be cast to eachother during list processing. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-10brcmfmac: Use __skb_peek().David S. Miller
Instead of direct SKB list pointer accesses. In these situations, we absolutely know that the SKB queue in question is non-empty. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-10p54: Use skb_peek_tail() instead of direct head pointer accesses.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-10lan78xx: Do not access skb_queue_head list pointers directly.David S. Miller
Use skb_queue_walk() instead. Adjust inner loop test to utilize and skb_queue_is_first(). Unfortunately we have to keep pkt_cnt around because it is used by a latter loop in this function. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-10ppp: Remove direct skb_queue_head list pointer access.David S. Miller
Add a helper, __skb_peek(), and use it in ppp_mp_reconstruct(). Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-10cxgb4: remove redundant assignment to vlan_cmd.dropnovlan_fmColin Ian King
A recent commit updated vlan_cmd.dropnovlan_fm but failed to remove the older assignment. Fix this by removing the former redundant assignment. Detected by CoverityScan, CID#1473290 ("Unused value") Fixes: a89cdd8e7c74 ("cxgb4: impose mandatory VLAN usage when non-zero TAG ID") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-08failover: Fix error return code in net_failover_createYueHaibing
if failover_register failed, 'err' code should be set correctly Fixes: cfc80d9a1163 ("net: Introduce net_failover driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-08net: stmmac: Enable TC Ops for GMAC >= 4Jose Abreu
GMAC >= 4 also supports CBS. Lets enable the TC Ops for these versions. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-08i40e(vf): remove i40e_ethtool_stats.h header fileJacob Keller
Essentially reverts commit 8fd75c58a09a ("i40e: move ethtool stats boiler plate code to i40e_ethtool_stats.h", 2018-08-30), and additionally moves the similar code in i40evf into i40evf_ethtool.c. The code was intially moved from i40e_ethtool.c into i40e_ethtool_stats.h as a way of better logically organizing the code. This has two problems. First, we can't have an inline function with variadic arguments on all platforms. Second, it gave the appearance that we had plans to share code between the i40e and i40evf drivers, due to having a near copy of the contents in the i40evf/i40e_ethtool_stats.h file. Patches which actually attempt to combine or share code between the i40e and i40evf drivers have not materialized, and are likely a ways off. Rather than fixing the one function which causes build issues, just move this code back into the i40e_ethtool.c and i40evf_ethtool.c files. Note that we also change these functions back from static inlines to just statics, since they're no longer in a header file. We can revisit this if/when work is done to actually attempt to share code between drivers. Alternatively, this stats code could be made more generic so that it can be shared across drivers as part of ethtool kernel work. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-07net: dsa: b53: Fix build with B53_SRAB enabled and not B53_SERDESFlorian Fainelli
In case B53_SRAB is enabled, but not B53_SERDES, we can get the following linking error: ERROR: "b53_serdes_init" [drivers/net/dsa/b53/b53_srab.ko] undefined! We also need to ifdef the body of b53_srab_serdes_map_lane() since it would not be used when B53_SERDES is disabled and that would produce a warning. Fixes: 0e01491de646 ("net: dsa: b53: Add SerDes support") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-07cxgb4: impose mandatory VLAN usage when non-zero TAG IDCasey Leedom
When a non-zero VLAN Tag ID is passed to t4_set_vlan_acl() then impose mandatory VLAN Usage with that VLAN ID. I.e any other VLAN ID should result in packets getting dropped. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-07liquidio: lio_fetch_vf_stats() can be statickbuild test robot
Fixes: 488752220b4a ("liquidio: Add spoof checking on a VF MAC address") Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-07nfp: replace spin_lock_bh with spin_lock in tasklet callbackjun qian
As you are already in a tasklet, it is unnecessary to call spin_lock_bh. Signed-off-by: jun qian <hangdianqj@163.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-07freescale: ethernet: remove unnecessary unlikely()Igor Stoppa
Both WARN_ON() and WARN_ONCE() already contain an unlikely(), so it's not necessary to wrap it into another. Signed-off-by: Igor Stoppa <igor.stoppa@huawei.com> Cc: Madalin Bucur <madalin.bucur@nxp.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06bnxt_en: remove set but not used variable 'addr_type'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c: In function 'bnxt_tc_parse_flow': drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c:186:6: warning: variable 'addr_type' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06liquidio CN23XX: Remove set but not used variable 'ring_flag'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c: In function 'cn23xx_setup_octeon_vf_device': drivers/net/ethernet/cavium/liquidio/cn23xx_vf_device.c:619:20: warning: variable 'ring_flag' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06liquidio: Add spoof checking on a VF MAC addressWeilin Chang
1. Provide the API to set/unset the spoof checking feature. 2. Add a function to periodically provide the count of found packets with spoof VF MAC address. 3. Prevent VF MAC address changing while the spoofchk of the VF is on unless the changing MAC address is issued from PF. Signed-off-by: Weilin Chang <weilin.chang@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06Merge tag 'mlx5e-updates-2018-09-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5e-updates-2018-09-05 This series provides updates to mlx5 ethernet driver. 1) Starting with a four patches series to optimize flow counters updates, From Vlad Buslov: ============================================== By default mlx5 driver updates cached counters each second. Update function consumes noticeable amount of CPU resources. The goal of this patch series is to optimize update function. Investigation revealed following bottlenecks in fs counters implementation: 1) Update code(scheduled each second) iterates over all counters twice. (first for finding and deleting counters that are marked for deletion, second iteration is for actually updating the counters) 2) Counters are stored in rb tree. Linear iteration over all rb tree elements(rb_next in profiling data) consumed ~65% of time spent in update function. Following optimizations were implemented: 1) Instead of just marking counters for deletion, store them in standalone list. This removes first iteration over whole counters tree. 2) Store counters in sorted list to optimize traversing them and remove calls to rb_next. First implementation of these changes caused degradation of performance, instead of improving it. Investigation revealed that there first cache line of struct mlx5_fc is full and adding anything to it causes amount of cache misses to double. To mitigate that, following refactorings were implemented: - Change 'addlist' list type from double linked to single linked. This allowes to get free space for one additional pointer that is used to store deletion list(optimization 1) - Substitute rb tree with idr. Idr is non-intrusive data structure and doesn't require adding any new members to struct mlx5_fc. Use free space that became available for double linked sorted list that is used for traversing all counters. (optimization 2) Described changes reduced CPU time spent in mlx5_fc_stats_work from 70% to 44%. (global perf profile mode) ============================================ The rest of the series are misc updates: 2) From Kamal, Move mlx5e_priv_flags into en_ethtool.c, to avoid a compilation warning. 3) From Roi Dayan, Move Q counters allocation and drop RQ to init_rx profile function to avoid allocating Q counters when not required. 4) From Shay Agroskin, Replace PTP clock lock from RW lock to seq lock. Almost double the packet rate when timestamping is active on multiple TX queues. 5) From: Natali Shechtman, set ECN for received packets using CQE indication. 6) From: Alaa Hleihel, don't set CHECKSUM_COMPLETE on SCTP packets. CHECKSUM_COMPLETE is not applicable to SCTP protocol. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06net: dsa: b53: Add SerDes supportFlorian Fainelli
Add support for the Northstar Plus SerDes which is accessed through a special page of the switch. Since this is something that most people probably will not want to use, make it a configurable option with a default on ARCH_BCM_NSP where it is the most useful currently. The SerDes supports both SGMII and 1000baseX modes for both lanes, and 2500baseX for one of the lanes, and is internally looking like a seemingly standard MII PHY, except for the few bits that got repurposed. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06net: dsa: b53: Add PHYLINK supportFlorian Fainelli
Add support for PHYLINK, things are reasonably straight forward since we do not yet support SerDes interfaces, that leaves us with just MLO_AN_PHY and MLO_AN_FIXED to deal with. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06net: dsa: b53: Add helper to set link parametersFlorian Fainelli
Extract the logic from b53_adjust_link() responsible for overriding a given port's link, speed, duplex and pause settings and make two helper functions to set the port's configuration and the port's link settings. We will make use of both, as separate functions while adding PHYLINK support next. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06net: dsa: b53: Make SRAB driver manage port interruptsFlorian Fainelli
Update the SRAB driver to manage per-port interrupts. Since we cannot sleep during b53_io_ops, schedule a workqueue whenever we get a port specific interrupt. We will later make use of this to call back into PHYLINK when there is e.g: a link state change. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06net: dsa: b53: Add ability to enable/disable port interruptsFlorian Fainelli
Some switches expose individual interrupt line(s) for port specific event(s), allow configuring these interrupts at an appropriate time during port_enable/disable callbacks where all port specific resources are known to be set-up and ready for use. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-06qed*: Utilize FW 8.37.7.0Denis Bolotin
This patch adds a new qed firmware with fixes and support for new features. Fixes: - Fix a rare case of device crash with iWARP, iSCSI or FCoE offload. - Fix GRE tunneled traffic when iWARP offload is enabled. - Fix RoCE failure in ib_send_bw when using inline data. - Fix latency optimization flow for inline WQEs. - BigBear 100G fix RDMA: - Reduce task context size. - Application page sizes above 2GB support. - Performance improvements. ETH: - Tenant DCB support. - Replace RSS indirection table update interface. Misc: - Debug Tools changes. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05net: lan78xx: Make declaration style consistentStefan Wahren
This patch makes some declaration more consistent. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Raghuram Chary Jallipalli <raghuramchary.jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05net: lan78xx: Switch to SPDX identifierStefan Wahren
Adopt the SPDX license identifier headers to ease license compliance management. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05net: lan78xx: Drop unnecessary strcpy in lan78xx_probeStefan Wahren
There is no need for this strcpy because alloc_etherdev() already does this job. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Raghuram Chary Jallipalli <raghuramchary.jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05net: lan78xx: Bail out if lan78xx_get_endpoints failsStefan Wahren
We need to bail out if lan78xx_get_endpoints() fails, otherwise the result is overwritten. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Raghuram Chary Jallipalli <raghuramchary.jallipalli@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05nfp: separate VXLAN and GRE feature handlingJakub Kicinski
VXLAN and GRE FW features have to currently be both advertised for the driver to enable them. Separate the handling. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05nfp: validate rtsym accesses fall within the symbolJakub Kicinski
With the accesses to rtsyms now all going via special helpers we can easily make sure the driver is not reading past the end of the symbol. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-05nfp: prefix rtsym error messages with symbol nameJakub Kicinski
For ease of debug preface all error messages with the name of the symbol which caused them. Use the same message format for existing messages while at it. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 04:35:41 +0000