summaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2021-01-04bareudp: Fix use of incorrect min_headroom sizeTaehee Yoo
In the bareudp6_xmit_skb(), it calculates min_headroom. At that point, it uses struct iphdr, but it's not correct. So panic could occur. The struct ipv6hdr should be used. Test commands: ip netns add A ip netns add B ip link add veth0 netns A type veth peer name veth1 netns B ip netns exec A ip link set veth0 up ip netns exec A ip a a 2001:db8:0::1/64 dev veth0 ip netns exec B ip link set veth1 up ip netns exec B ip a a 2001:db8:0::2/64 dev veth1 for i in {10..1} do let A=$i-1 ip netns exec A ip link add bareudp$i type bareudp dstport $i \ ethertype 0x86dd ip netns exec A ip link set bareudp$i up ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev bareudp$i ip netns exec A ip -6 r a 2001:db8:$i::2 encap ip6 src \ 2001:db8:$A::1 dst 2001:db8:$A::2 via 2001:db8:$i::2 \ dev bareudp$i ip netns exec B ip link add bareudp$i type bareudp dstport $i \ ethertype 0x86dd ip netns exec B ip link set bareudp$i up ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev bareudp$i ip netns exec B ip -6 r a 2001:db8:$i::1 encap ip6 src \ 2001:db8:$A::2 dst 2001:db8:$A::1 via 2001:db8:$i::1 \ dev bareudp$i done ip netns exec A ping 2001:db8:7::2 Splat looks like: [ 66.436679][ C2] skbuff: skb_under_panic: text:ffffffff928614c8 len:454 put:14 head:ffff88810abb4000 data:ffff88810abb3ffa tail:0x1c0 end:0x3ec0 dev:veth0 [ 66.441626][ C2] ------------[ cut here ]------------ [ 66.443458][ C2] kernel BUG at net/core/skbuff.c:109! [ 66.445313][ C2] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 66.447606][ C2] CPU: 2 PID: 913 Comm: ping Not tainted 5.10.0+ #819 [ 66.450251][ C2] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 66.453713][ C2] RIP: 0010:skb_panic+0x15d/0x15f [ 66.455345][ C2] Code: 98 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 60 8b 78 93 41 57 41 56 41 55 48 8b 54 24 20 48 8b 74 24 28 e8 b5 40 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 08 c9 98 fe 8b 34 24 48 c7 c1 80 [ 66.462314][ C2] RSP: 0018:ffff888119209648 EFLAGS: 00010286 [ 66.464281][ C2] RAX: 0000000000000089 RBX: ffff888003159000 RCX: 0000000000000000 [ 66.467216][ C2] RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed10232412c0 [ 66.469768][ C2] RBP: ffff88810a53d440 R08: ffffed102328018d R09: ffffed102328018d [ 66.472297][ C2] R10: ffff888119400c67 R11: ffffed102328018c R12: 000000000000000e [ 66.474833][ C2] R13: ffff88810abb3ffa R14: 00000000000001c0 R15: 0000000000003ec0 [ 66.477361][ C2] FS: 00007f37c0c72f00(0000) GS:ffff888119200000(0000) knlGS:0000000000000000 [ 66.480214][ C2] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 66.482296][ C2] CR2: 000055a058808570 CR3: 000000011039e002 CR4: 00000000003706e0 [ 66.484811][ C2] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 66.487793][ C2] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 66.490424][ C2] Call Trace: [ 66.491469][ C2] <IRQ> [ 66.492374][ C2] ? eth_header+0x28/0x190 [ 66.494054][ C2] ? eth_header+0x28/0x190 [ 66.495401][ C2] skb_push.cold.99+0x22/0x22 [ 66.496700][ C2] eth_header+0x28/0x190 [ 66.497867][ C2] neigh_resolve_output+0x3de/0x720 [ 66.499615][ C2] ? __neigh_update+0x7e8/0x20a0 [ 66.501176][ C2] __neigh_update+0x8bd/0x20a0 [ 66.502749][ C2] ndisc_update+0x34/0xc0 [ 66.504010][ C2] ndisc_recv_na+0x8da/0xb80 [ 66.505041][ C2] ? pndisc_redo+0x20/0x20 [ 66.505888][ C2] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 66.506965][ C2] ndisc_rcv+0x3a0/0x470 [ 66.507797][ C2] icmpv6_rcv+0xad9/0x1b00 [ 66.508645][ C2] ip6_protocol_deliver_rcu+0xcd6/0x1560 [ 66.509719][ C2] ip6_input_finish+0x5b/0xf0 [ 66.510615][ C2] ip6_input+0xcd/0x2d0 [ 66.511406][ C2] ? ip6_input_finish+0xf0/0xf0 [ 66.512327][ C2] ? rcu_read_lock_held+0x91/0xa0 [ 66.513279][ C2] ? ip6_protocol_deliver_rcu+0x1560/0x1560 [ 66.514414][ C2] ipv6_rcv+0xe8/0x300 [ ... ] Acked-by: Guillaume Nault <gnault@redhat.com> Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20201228152146.24270-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04bareudp: set NETIF_F_LLTX flagTaehee Yoo
Like other tunneling interfaces, the bareudp doesn't need TXLOCK. So, It is good to set the NETIF_F_LLTX flag to improve performance and to avoid lockdep's false-positive warning. Test commands: ip netns add A ip netns add B ip link add veth0 netns A type veth peer name veth1 netns B ip netns exec A ip link set veth0 up ip netns exec A ip a a 10.0.0.1/24 dev veth0 ip netns exec B ip link set veth1 up ip netns exec B ip a a 10.0.0.2/24 dev veth1 for i in {2..1} do let A=$i-1 ip netns exec A ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec A ip link set bareudp$i up ip netns exec A ip a a 10.0.$i.1/24 dev bareudp$i ip netns exec A ip r a 10.0.$i.2 encap ip src 10.0.$A.1 \ dst 10.0.$A.2 via 10.0.$i.2 dev bareudp$i ip netns exec B ip link add bareudp$i type bareudp \ dstport $i ethertype ip ip netns exec B ip link set bareudp$i up ip netns exec B ip a a 10.0.$i.2/24 dev bareudp$i ip netns exec B ip r a 10.0.$i.1 encap ip src 10.0.$A.2 \ dst 10.0.$A.1 via 10.0.$i.1 dev bareudp$i done ip netns exec A ping 10.0.2.2 Splat looks like: [ 96.992803][ T822] ============================================ [ 96.993954][ T822] WARNING: possible recursive locking detected [ 96.995102][ T822] 5.10.0+ #819 Not tainted [ 96.995927][ T822] -------------------------------------------- [ 96.997091][ T822] ping/822 is trying to acquire lock: [ 96.998083][ T822] ffff88810f753898 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 96.999813][ T822] [ 96.999813][ T822] but task is already holding lock: [ 97.001192][ T822] ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.002908][ T822] [ 97.002908][ T822] other info that might help us debug this: [ 97.004401][ T822] Possible unsafe locking scenario: [ 97.004401][ T822] [ 97.005784][ T822] CPU0 [ 97.006407][ T822] ---- [ 97.007010][ T822] lock(_xmit_NONE#2); [ 97.007779][ T822] lock(_xmit_NONE#2); [ 97.008550][ T822] [ 97.008550][ T822] *** DEADLOCK *** [ 97.008550][ T822] [ 97.010057][ T822] May be due to missing lock nesting notation [ 97.010057][ T822] [ 97.011594][ T822] 7 locks held by ping/822: [ 97.012426][ T822] #0: ffff888109a144f0 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x12f7/0x2b00 [ 97.014191][ T822] #1: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.016045][ T822] #2: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.017897][ T822] #3: ffff88810c385498 (_xmit_NONE#2){+.-.}-{2:2}, at: __dev_queue_xmit+0x1f52/0x2960 [ 97.019684][ T822] #4: ffffffffbce2f600 (rcu_read_lock){....}-{1:2}, at: bareudp_xmit+0x31b/0x3690 [bareudp] [ 97.021573][ T822] #5: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: ip_finish_output2+0x249/0x2020 [ 97.023424][ T822] #6: ffffffffbce2f5a0 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x1fd/0x2960 [ 97.025259][ T822] [ 97.025259][ T822] stack backtrace: [ 97.026349][ T822] CPU: 3 PID: 822 Comm: ping Not tainted 5.10.0+ #819 [ 97.027609][ T822] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 97.029407][ T822] Call Trace: [ 97.030015][ T822] dump_stack+0x99/0xcb [ 97.030783][ T822] __lock_acquire.cold.77+0x149/0x3a9 [ 97.031773][ T822] ? stack_trace_save+0x81/0xa0 [ 97.032661][ T822] ? register_lock_class+0x1910/0x1910 [ 97.033673][ T822] ? register_lock_class+0x1910/0x1910 [ 97.034679][ T822] ? rcu_read_lock_sched_held+0x91/0xc0 [ 97.035697][ T822] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 97.036690][ T822] lock_acquire+0x1b2/0x730 [ 97.037515][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.038466][ T822] ? check_flags+0x50/0x50 [ 97.039277][ T822] ? netif_skb_features+0x296/0x9c0 [ 97.040226][ T822] ? validate_xmit_skb+0x29/0xb10 [ 97.041151][ T822] _raw_spin_lock+0x30/0x70 [ 97.041977][ T822] ? __dev_queue_xmit+0x1f52/0x2960 [ 97.042927][ T822] __dev_queue_xmit+0x1f52/0x2960 [ 97.043852][ T822] ? netdev_core_pick_tx+0x290/0x290 [ 97.044824][ T822] ? mark_held_locks+0xb7/0x120 [ 97.045712][ T822] ? lockdep_hardirqs_on_prepare+0x12c/0x3e0 [ 97.046824][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.047771][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.048710][ T822] ? trace_hardirqs_on+0x41/0x120 [ 97.049626][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.050556][ T822] ? __local_bh_enable_ip+0xa5/0xf0 [ 97.051509][ T822] ? ___neigh_create+0x12a8/0x1eb0 [ 97.052443][ T822] ? check_chain_key+0x244/0x5f0 [ 97.053352][ T822] ? rcu_read_lock_bh_held+0x56/0xa0 [ 97.054317][ T822] ? ip_finish_output2+0x6ea/0x2020 [ 97.055263][ T822] ? pneigh_lookup+0x410/0x410 [ 97.056135][ T822] ip_finish_output2+0x6ea/0x2020 [ ... ] Acked-by: Guillaume Nault <gnault@redhat.com> Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20201228152136.24215-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-28net: hdlc_ppp: Fix issues when mod_timer is called while timer is runningXie He
ppp_cp_event is called directly or indirectly by ppp_rx with "ppp->lock" held. It may call mod_timer to add a new timer. However, at the same time ppp_timer may be already running and waiting for "ppp->lock". In this case, there's no need for ppp_timer to continue running and it can just exit. If we let ppp_timer continue running, it may call add_timer. This causes kernel panic because add_timer can't be called with a timer pending. This patch fixes this problem. Fixes: e022c2f07ae5 ("WAN: new synchronous PPP implementation for generic HDLC.") Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-28atlantic: remove architecture dependsLéo Le Bouter
This was tested on a RaptorCS Talos II with IBM POWER9 DD2.2 CPUs and an ASUS XG-C100F PCI-e card without any issue. Speeds of ~8Gbps could be attained with not-very-scientific (wget HTTP) both-ways measurements on a local network. No warning or error reported in kernel logs. The drivers seems to be portable enough for it not to be gated like such. Signed-off-by: Léo Le Bouter <lle-bout@zaclys.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-28net: hns: fix return value check in __lb_other_process()Yunjian Wang
The function skb_copy() could return NULL, the return value need to be checked. Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support") Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-28net: mvpp2: fix pkt coalescing int-threshold configurationStefan Chulski
The packet coalescing interrupt threshold has separated registers for different aggregated/cpu (sw-thread). The required value should be loaded for every thread but not only for 1 current cpu. Fixes: 213f428f5056 ("net: mvpp2: add support for TX interrupts and RX queue distribution modes") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1608748521-11033-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-28net: ipa: don't return a value from evt_ring_command()Alex Elder
Callers of evt_ring_command() no longer care whether the command times out, and don't use what evt_ring_command() returns. Redefine that function to have void return type. Reported-by: kernel test robot <lkp@intel.com> Fixes: 428b448ee764a ("net: ipa: use state to determine event ring command success") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-28net: ipa: don't return a value from gsi_channel_command()Alex Elder
Callers of gsi_channel_command() no longer care whether the command times out, and don't use what gsi_channel_command() returns. Redefine that function to have void return type. Reported-by: kernel test robot <lkp@intel.com> Fixes: 6ffddf3b3d182 ("net: ipa: use state to determine channel command success") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-28bnxt_en: Check TQM rings for maximum supported value.Michael Chan
TQM rings are hardware resources that require host context memory managed by the driver. The driver supports up to 9 TQM rings and the number of rings to use is requested by firmware during run-time. Cap this number to the maximum supported to prevent accessing beyond the array. Future firmware may request more than 9 TQM rings. Define macros to remove the magic number 9 from the C code. Fixes: ac3158cb0108 ("bnxt_en: Allocate TQM ring context memory according to fw specification.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-28bnxt_en: Fix AER recovery.Vasundhara Volam
A recent change skips sending firmware messages to the firmware when pci_channel_offline() is true during fatal AER error. To make this complete, we need to move the re-initialization sequence to bnxt_io_resume(), otherwise the firmware messages to re-initialize will all be skipped. In any case, it is more correct to re-initialize in bnxt_io_resume(). Also, fix the reverse x-mas tree format when defining variables in bnxt_io_slot_reset(). Fixes: b340dc680ed4 ("bnxt_en: Avoid sending firmware messages when AER error is detected.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-28Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-12-23 Commit e086ba2fccda ("e1000e: disable s0ix entry and exit flows for ME systems") disabled S0ix flows for systems that have various incarnations of the i219-LM ethernet controller. This was done because of some regressions caused by an earlier commit 632fbd5eb5b0e ("e1000e: fix S0ix flows for cable connected case") with i219-LM controller. Per discussion with Intel architecture team this direction should be changed and allow S0ix flows to be used by default. This patch series includes directional changes for their conclusions in https://lkml.org/lkml/2020/12/13/15. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: Export S0ix flags to ethtool Revert "e1000e: disable s0ix entry and exit flows for ME systems" e1000e: bump up timeout to wait when ME un-configures ULP mode e1000e: Only run S0ix flows if shutdown succeeded ==================== Link: https://lore.kernel.org/r/20201223233625.92519-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-28tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGSYunjian Wang
Currently the tun_napi_alloc_frags() function returns -ENOMEM when the number of iovs exceeds MAX_SKB_FRAGS + 1. However this is inappropriate, we should use -EMSGSIZE instead of -ENOMEM. The following distinctions are matters: 1. the caller need to drop the bad packet when -EMSGSIZE is returned, which means meeting a persistent failure. 2. the caller can try again when -ENOMEM is returned, which means meeting a transient failure. Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/1608864736-24332-1-git-send-email-wangyunjian@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-28net: ethernet: ti: cpts: fix ethtool output when no ptp_clock registeredGrygorii Strashko
The CPTS driver registers PTP PHC clock when first netif is going up and unregister it when all netif are down. Now ethtool will show: - PTP PHC clock index 0 after boot until first netif is up; - the last assigned PTP PHC clock index even if PTP PHC clock is not registered any more after all netifs are down. This patch ensures that -1 is returned by ethtool when PTP PHC clock is not registered any more. Fixes: 8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20201224162405.28032-1-grygorii.strashko@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-28CDC-NCM: remove "connected" log messageRoland Dreier
The cdc_ncm driver passes network connection notifications up to usbnet_link_change(), which is the right place for any logging. Remove the netdev_info() duplicating this from the driver itself. This stops devices such as my "TRENDnet USB 10/100/1G/2.5G LAN" (ID 20f4:e02b) adapter from spamming the kernel log with cdc_ncm 2-2:2.0 enp0s2u2c2: network connection: connected messages every 60 msec or so. Signed-off-by: Roland Dreier <roland@kernel.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20201224032116.2453938-1-roland@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23e1000e: Export S0ix flags to ethtoolMario Limonciello
This flag can be used by an end user to disable S0ix flows on a buggy system or by an OEM for development purposes. If you need this flag to be persisted across reboots, it's suggested to use a udev rule to call adjust it until the kernel could have your configuration in a disallow list. Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Yijun Shen <Yijun.shen@dell.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-23Revert "e1000e: disable s0ix entry and exit flows for ME systems"Mario Limonciello
commit e086ba2fccda ("e1000e: disable s0ix entry and exit flows for ME systems") disabled s0ix flows for systems that have various incarnations of the i219-LM ethernet controller. This changed caused power consumption regressions on the following shipping Dell Comet Lake based laptops: * Latitude 5310 * Latitude 5410 * Latitude 5410 * Latitude 5510 * Precision 3550 * Latitude 5411 * Latitude 5511 * Precision 3551 * Precision 7550 * Precision 7750 This commit was introduced because of some regressions on certain Thinkpad laptops. This comment was potentially caused by an earlier commit 632fbd5eb5b0e ("e1000e: fix S0ix flows for cable connected case"). or it was possibly caused by a system not meeting platform architectural requirements for low power consumption. Other changes made in the driver with extended timeouts are expected to make the driver more impervious to platform firmware behavior. Fixes: e086ba2fccda ("e1000e: disable s0ix entry and exit flows for ME systems") Reviewed-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Yijun Shen <Yijun.shen@dell.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-23e1000e: bump up timeout to wait when ME un-configures ULP modeMario Limonciello
Per guidance from Intel ethernet architecture team, it may take up to 1 second for unconfiguring ULP mode. However in practice this seems to be taking up to 2 seconds on some Lenovo machines. Detect scenarios that take more than 1 second but less than 2.5 seconds and emit a warning on resume for those scenarios. Suggested-by: Aaron Ma <aaron.ma@canonical.com> Suggested-by: Sasha Netfin <sasha.neftin@intel.com> Suggested-by: Hans de Goede <hdegoede@redhat.com> CC: Mark Pearson <markpearson@lenovo.com> Fixes: f15bb6dde738cc8fa0 ("e1000e: Add support for S0ix") BugLink: https://bugs.launchpad.net/bugs/1865570 Link: https://patchwork.ozlabs.org/project/intel-wired-lan/patch/20200323191639.48826-1-aaron.ma@canonical.com/ Link: https://lkml.org/lkml/2020/12/13/15 Link: https://lkml.org/lkml/2020/12/14/708 Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Yijun Shen <Yijun.shen@dell.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-23e1000e: Only run S0ix flows if shutdown succeededMario Limonciello
If the shutdown failed, the part will be thawed and running S0ix flows will put it into an undefined state. Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Reviewed-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Mario Limonciello <mario.limonciello@dell.com> Tested-by: Yijun Shen <Yijun.shen@dell.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-23ibmvnic: continue fatal error reset after passive initLijun Pan
Commit f9c6cea0b385 ("ibmvnic: Skip fatal error reset after passive init") says "If the passive CRQ initialization occurs before the FATAL reset task is processed, the FATAL error reset task would try to access a CRQ message queue that was freed, causing an oops. The problem may be most likely to occur during DLPAR add vNIC with a non-default MTU, because the DLPAR process will automatically issue a change MTU request. Fix this by not processing fatal error reset if CRQ is passively initialized after client-driven CRQ initialization fails." The original commit skips a specific reset condition, but that does not fix the problem it claims to fix, and misses a reset condition. The effective fix is commit 0e435befaea4 ("ibmvnic: fix NULL pointer dereference in ibmvic_reset_crq") and commit a0faaa27c716 ("ibmvnic: fix NULL pointer dereference in reset_sub_crq_queues"). With above two fixes, there are no more crashes seen as described even without the original commit, so I would like to revert the original commit. Fixes: f9c6cea0b385 ("ibmvnic: Skip fatal error reset after passive init") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20201223204904.12677-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23net: ethernet: Fix memleak in ethoc_probeDinghao Liu
When mdiobus_register() fails, priv->mdio allocated by mdiobus_alloc() has not been freed, which leads to memleak. Fixes: e7f4dc3536a4 ("mdio: Move allocation of interrupts into core") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201223110615.31389-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23net: ipa: use state to determine event ring command successAlex Elder
This patch implements the same basic fix for event rings as the previous one does for channels. The result of issuing an event ring control command should be that the event ring changes state. If enabled, a completion interrupt signals that the event ring state has changed. This interrupt is enabled by gsi_evt_ring_command() and disabled again after the command has completed (or we time out). There is a window of time during which the command could complete successfully without interrupting. This would cause the event ring to transition to the desired new state. So whether a event ring command ends via completion interrupt or timeout, we can consider the command successful if the event ring has entered the desired state (and a failure if it has not, regardless of the cause). Fixes: b4175f8731f78 ("net: ipa: only enable GSI event control IRQs when needed") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23net: ipa: use state to determine channel command successAlex Elder
The result of issuing a channel control command should be that the channel changes state. If enabled, a completion interrupt signals that the channel state has changed. This interrupt is enabled by gsi_channel_command() and disabled again after the command has completed (or we time out). There is a window of time--after the completion interrupt is disabled but before the channel state is read--during which the command could complete successfully without interrupting. This would cause the channel to transition to the desired new state. So whether a channel command ends via completion interrupt or timeout, we can consider the command successful if the channel has entered the desired state (and a failure if it has not, regardless of the cause). Fixes: d6c9e3f506ae8 ("net: ipa: only enable generic command completion IRQ when needed"); Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23net: ipa: clear pending interrupts before enablingAlex Elder
We enable the completion interrupt for channel or event ring commands only when we issue them. The interrupt is disabled after the interrupt has fired, or after we have timed out waiting for it. If we time out, the command could complete after the interrupt has been disabled, causing a state change in the channel or event ring. The interrupt associated with that state change would be delivered the next time the completion interrupt is enabled. To avoid previous command completions interfering with new commands, clear all pending completion interrupts before re-enabling them for a new command. Fixes: b4175f8731f78 ("net: ipa: only enable GSI event control IRQs when needed") Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23stmmac: intel: Add PCI IDs for TGL-H platformNoor Azura Ahmad Tarmizi
Add TGL-H PCI info and PCI IDs for the new TSN Controller to the list of supported devices. Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com> Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Link: https://lore.kernel.org/r/20201222160337.30870-1-muhammad.husaini.zulkifli@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23net: ipa: fix interconnect enable bugAlex Elder
When the core clock rate and interconnect bandwidth specifications were moved into configuration data, a copy/paste bug was introduced, causing the memory interconnect bandwidth to be set three times rather than enabling the three different interconnects. Fix this bug. Fixes: 91d02f9551501 ("net: ipa: use config data for clocking") Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Georgi Djakov <georgi.djakov@linaro.org> Link: https://lore.kernel.org/r/20201222151613.5730-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-23virtio_net: Fix recursive call to cpus_read_lock()Jeff Dike
virtnet_set_channels can recursively call cpus_read_lock if CONFIG_XPS and CONFIG_HOTPLUG are enabled. The path is: virtnet_set_channels - calls get_online_cpus(), which is a trivial wrapper around cpus_read_lock() netif_set_real_num_tx_queues netif_reset_xps_queues_gt netif_reset_xps_queues - calls cpus_read_lock() This call chain and potential deadlock happens when the number of TX queues is reduced. This commit the removes netif_set_real_num_[tr]x_queues calls from inside the get/put_online_cpus section, as they don't require that it be held. Fixes: 47be24796c13 ("virtio-net: fix the set affinity bug when CPU IDs are not consecutive") Signed-off-by: Jeff Dike <jdike@akamai.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20201223025421.671-1-jdike@akamai.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-22Merge tag 'wireless-drivers-2020-12-22' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.11 First set of fixes for v5.11, more fixes than usual this time. For ath11k we have several fixes for QCA6390 PCI support and mt76 has several. Also one build fix for mt76. mt76 * fix two NULL pointer dereference * fix build error when CONFIG_MAC80211_MESH is disabled rtlwifi * fix use-after-free in firmware handling code ath11k * error handling fixes * fix crash found during connect and disconnect test * handle HT disable better * avoid printing qmi memory failure during firmware bootup * disable ASPM during firmware bootup * tag 'wireless-drivers-2020-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers: MAINTAINERS: switch to different email address mt76: mt7915: fix MESH ifdef block mt76: mt76s: fix NULL pointer dereference in mt76s_process_tx_queue mt76: sdio: remove wake logic in mt76s_process_tx_queue mt76: usb: remove wake logic in mt76u_status_worker ath11k: pci: disable ASPM L0sLs before downloading firmware ath11k: qmi: try to allocate a big block of DMA memory first rtlwifi: rise completion at the last step of firmware callback mt76: mt76u: fix NULL pointer dereference in mt76u_status_worker ath11k: Fix ath11k_pci_fix_l1ss() ath11k: Fix error code in ath11k_core_suspend() ath11k: start vdev if a bss peer is already created ath11k: fix crash caused by NULL rx_channel ath11k: add missing null check on allocated skb ==================== Link: https://lore.kernel.org/r/20201222163727.D4336C433C6@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-22qede: fix offload for IPIP tunnel packetsManish Chopra
IPIP tunnels packets are unknown to device, hence these packets are incorrectly parsed and caused the packet corruption, so disable offlods for such packets at run time. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Link: https://lore.kernel.org/r/20201221145530.7771-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-22net: ethernet: mvneta: Fix error handling in mvneta_probeDinghao Liu
When mvneta_port_power_up() fails, we should execute cleanup functions after label err_netdev to avoid memleak. Fixes: 41c2b6b4f0f80 ("net: ethernet: mvneta: Add back interface mode validation") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20201220082930.21623-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-22ibmvnic: fix login buffer memory leakLijun Pan
Commit 34f0f4e3f488 ("ibmvnic: Fix login buffer memory leaks") frees login_rsp_buffer in release_resources() and send_login() because handle_login_rsp() does not free it. Commit f3ae59c0c015 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct") frees login_rsp_buffer in handle_login_rsp(). It seems unnecessary to free it in release_resources() and send_login(). There are chances that handle_login_rsp returns earlier without freeing buffers. Double-checking the buffer is harmless since release_login_buffer and release_login_rsp_buffer will do nothing if buffer is already freed. Fixes: f3ae59c0c015 ("ibmvnic: store RX and TX subCRQ handle array in ibmvnic_adapter struct") Fixes: 34f0f4e3f488 ("ibmvnic: Fix login buffer memory leaks") Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Link: https://lore.kernel.org/r/20201219213919.21045-1-ljp@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-22net: stmmac: dwmac-meson8b: ignore the second clock inputMartin Blumenstingl
The dwmac glue registers on Amlogic Meson8b and newer SoCs has two clock inputs: - Meson8b and Meson8m2: MPLL2 and MPLL2 (the same parent is wired to both inputs) - GXBB, GXL, GXM, AXG, G12A, G12B, SM1: FCLK_DIV2 and MPLL2 All known vendor kernels and u-boots are using the first input only. We let the common clock framework automatically choose the "right" parent. For some boards this causes a problem though, specificially with G12A and newer SoCs. The clock input is used for generating the 125MHz RGMII TX clock. For the two input clocks this means on G12A: - FCLK_DIV2: 999999985Hz / 8 = 124999998.125Hz - MPLL2: 499999993Hz / 4 = 124999998.25Hz In theory MPLL2 is the "better" clock input because it's gets us 0.125Hz closer to the requested frequency than FCLK_DIV2. In reality however there is a resource conflict because MPLL2 is needed to generate some of the audio clocks. dwmac-meson8b probes first and sets up the clock tree with MPLL2. This works fine until the audio driver comes and "steals" the MPLL2 clocks and configures it with it's own rate (294909637Hz). The common clock framework happily changes the MPLL2 rate but does not reconfigure our RGMII TX clock tree, which then ends up at 73727409Hz, which is more than 40% off the requested 125MHz. Don't use the second clock input for now to force the common clock framework to always select the first parent. This mimics the behavior from the vendor driver and fixes the clock resource conflict with the audio driver on G12A boards. Once the common clock framework can handle this situation this change can be reverted again. Fixes: 566e8251625304 ("net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMAC") Reported-by: Thomas Graichen <thomas.graichen@gmail.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: thomas graichen <thomas.graichen@gmail.com> Link: https://lore.kernel.org/r/20201219135036.3216017-1-martin.blumenstingl@googlemail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-21net: mvpp2: Fix GoP port 3 Networking Complex Control configurationsStefan Chulski
During GoP port 2 Networking Complex Control mode of operation configurations, also GoP port 3 mode of operation was wrongly set. Patch removes these configurations. Fixes: f84bf386f395 ("net: mvpp2: initialize the GoP") Acked-by: Marcin Wojtas <mw@semihalf.com> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1608462149-1702-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-21ionic: account for vlan tag len in rx buffer lenShannon Nelson
Let the FW know we have enough receive buffer space for the vlan tag if it isn't stripped. Fixes: 0f3154e6bcb3 ("ionic: Add Tx and Rx handling") Signed-off-by: Shannon Nelson <snelson@pensando.io> Link: https://lore.kernel.org/r/20201218215001.64696-1-snelson@pensando.io Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-21ethernet: ucc_geth: fix use-after-free in ucc_geth_remove()Rasmus Villemoes
ugeth is the netdiv_priv() part of the netdevice. Accessing the memory pointed to by ugeth (such as done by ucc_geth_memclean() and the two of_node_puts) after free_netdev() is thus use-after-free. Fixes: 80a9fad8e89a ("ucc_geth: fix module removal") Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-21ethernet: ucc_geth: fix definition and size of ucc_geth_tx_global_pramRasmus Villemoes
Table 8-53 in the QUICC Engine Reference manual shows definitions of fields up to a size of 192 bytes, not just 128. But in table 8-111, one does find the text Base Address of the Global Transmitter Parameter RAM Page. [...] The user needs to allocate 128 bytes for this page. The address must be aligned to the page size. I've checked both rev. 7 (11/2015) and rev. 9 (05/2018) of the manual; they both have this inconsistency (and the table numbers are the same). Adding a bit of debug printing, on my board the struct ucc_geth_tx_global_pram is allocated at offset 0x880, while the (opaque) ucc_geth_thread_data_tx gets allocated immediately afterwards, at 0x900. So whatever the engine writes into the thread data overlaps with the tail of the global tx pram (and devmem says that something does get written during a simple ping). I haven't observed any failure that could be attributed to this, but it seems to be the kind of thing that would be extremely hard to debug. So extend the struct definition so that we do allocate 192 bytes. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-21ethernet: ucc_geth: set dev->max_mtu to 1518Rasmus Villemoes
All the buffers and registers are already set up appropriately for an MTU slightly above 1500, so we just need to expose this to the networking stack. AFAICT, there's no need to implement .ndo_change_mtu when the receive buffers are always set up to support the max_mtu. This fixes several warnings during boot on our mpc8309-board with an embedded mv88e6250 switch: mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 0 ... mv88e6085 mdio@e0102120:10: nonfatal error -34 setting MTU 1500 on port 4 ucc_geth e0102000.ethernet eth1: error -22 setting MTU to 1504 to include DSA overhead The last line explains what the DSA stack tries to do: achieving an MTU of 1500 on-the-wire requires that the master netdevice connected to the CPU port supports an MTU of 1500+the tagging overhead. Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-21net: systemport: set dev->max_mtu to UMAC_MAX_MTU_SIZEFlorian Fainelli
The driver is already allocating receive buffers of 2KiB and the Ethernet MAC is configured to accept frames up to UMAC_MAX_MTU_SIZE. Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20201218173843.141046-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-20mt76: mt7915: fix MESH ifdef blockRandy Dunlap
Fix a build error when CONFIG_MAC80211_MESH is not enabled: ../drivers/net/wireless/mediatek/mt76/mt7915/init.c:47:2: error: expected expression before '}' token }, { ^ Fixes: af901eb4ab80 ("mt76: mt7915: get rid of dbdc debugfs knob") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Shayne Chen <shayne.chen@mediatek.com> Cc: Ryder Lee <ryder.lee@mediatek.com> Cc: Lorenzo Bianconi <lorenzo@kernel.org> Cc: Felix Fietkau <nbd@nbd.name> Cc: linux-wireless@vger.kernel.org Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201218173202.23159-1-rdunlap@infradead.org
2020-12-20mt76: mt76s: fix NULL pointer dereference in mt76s_process_tx_queueLorenzo Bianconi
Fix a possible NULL pointer dereference in mt76s_process_tx_queue that can occur if status thread runs before allocating tx queues Fixes: 6a618acb7e62 ("mt76: sdio: convert {status/net}_work to mt76_worker") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/b49c1b4edacd87b2241a9fd0431dd4864c8963f6.1607418933.git.lorenzo@kernel.org
2020-12-20mt76: sdio: remove wake logic in mt76s_process_tx_queueLorenzo Bianconi
Similar to mmio/usb code path, remove wake logic in mt76s_process_tx_queue routine. Starting from commit 90d494c99a99 ("mt76: improve tx queue stop/wake"), the wake queue logic on the sdio status path is no longer necessary since the hw queues are no longer stopped on the mt76 tx path. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/d2d7d9d437f4dec2ef1df0ed070b9cf299f021ad.1607164041.git.lorenzo@kernel.org
2020-12-20mt76: usb: remove wake logic in mt76u_status_workerLorenzo Bianconi
Similar to mmio code path, remove wake logic in mt76u_status_worker handler. Starting from commit 90d494c99a99 ("mt76: improve tx queue stop/wake")', the wake queue logic on the usb status path is no longer necessary since the hw queues are no longer stopped on the mt76 tx path. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/00009bf0cfdc9565e4432cad3ed51888c667c25d.1607164041.git.lorenzo@kernel.org
2020-12-20Merge ath-current from ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git ath.git fixes for 5.11. Major changes: ath11k * add null check for skb allocation * fix crash found during connect/disconnect stress testing * fix for HT disabled case * brown paperbag fixes for my bugs in suspend code * fix an unnecessary qmi allocation during firmware bootup * disable ASPM during firmware bootup to avoid issues
2020-12-19net: mvpp2: prs: fix PPPoE with ipv6 packet parseStefan Chulski
Current PPPoE+IPv6 entry is jumping to 'next-hdr' field and not to 'DIP' field as done for IPv4. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Reported-by: Liron Himi <lironh@marvell.com> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1608230266-22111-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-19net: mvpp2: Add TCAM entry to drop flow control pause framesStefan Chulski
Issue: Flow control frame used to pause GoP(MAC) was delivered to the CPU and created a load on the CPU. Since XOFF/XON frames are used only by MAC, these frames should be dropped inside MAC. Fix: According to 802.3-2012 - IEEE Standard for Ethernet pause frame has unique destination MAC address 01-80-C2-00-00-01. Add TCAM parser entry to track and drop pause frames by destination MAC. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Link: https://lore.kernel.org/r/1608229817-21951-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-19net: mvpp2: disable force link UP during port init procedureStefan Chulski
Force link UP can be enabled by bootloader during tftpboot and breaks NFS support. Force link UP disabled during port init procedure. Fixes: f84bf386f395 ("net: mvpp2: initialize the GoP") Signed-off-by: Stefan Chulski <stefanc@marvell.com> Acked-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/1608216735-14501-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-18Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-12-17 Sylwester fixes an issue where PF was not properly being rebuilt following VF removal for i40e. Jakub Kicinski fixes a double release of rtnl_lock on iavf_lan_add_device() error for iavf. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: iavf: fix double-release of rtnl_lock i40e: Fix Error I40E_AQ_RC_EINVAL when removing VFs ==================== Link: https://lore.kernel.org/r/20201217223418.3134992-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-18ath11k: pci: disable ASPM L0sLs before downloading firmwareCarl Huang
Sometimes QCA6390 doesn't switch to amss state as device enters L1ss state, so disable L0sL1s during firmware downloading. Driver recovers the ASPM to default value in start callback or powerdown callback. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608218530-15426-1-git-send-email-kvalo@codeaurora.org
2020-12-18ath11k: qmi: try to allocate a big block of DMA memory firstCarl Huang
Not all firmware versions support allocating DMA memory in smaller blocks so first try to allocate big block of DMA memory for QMI. If the allocation fails, let firmware request multiple blocks of DMA memory with smaller size. This also fixes an unnecessary error message seen during ath11k probe on QCA6390: ath11k_pci 0000:06:00.0: Respond mem req failed, result: 1, err: 0 ath11k_pci 0000:06:00.0: qmi failed to respond fw mem req:-22 Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1608127593-15192-1-git-send-email-kvalo@codeaurora.org
2020-12-17iavf: fix double-release of rtnl_lockJakub Kicinski
This code does not jump to exit on an error in iavf_lan_add_device(), so the rtnl_unlock() from the normal path will follow. Fixes: b66c7bc1cd4d ("iavf: Refactor init state machine") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-17Merge tag 'net-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - always broken: - net/smc: fix access to parent of an ib device - devlink: use _BITUL() macro instead of BIT() in the UAPI header - handful of mptcp fixes Previous release - regressions: - intel: AF_XDP: clear the status bits for the next_to_use descriptor - dpaa2-eth: fix the size of the mapped SGT buffer Previous release - always broken: - mptcp: fix security context on server socket - ethtool: fix string set id check - ethtool: fix error paths in ethnl_set_channels() - lan743x: fix rx_napi_poll/interrupt ping-pong - qca: ar9331: fix sleeping function called from invalid context bug" * tag 'net-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits) net/sched: sch_taprio: reset child qdiscs before freeing them nfp: move indirect block cleanup to flower app stop callback octeontx2-af: Fix undetected unmap PF error check net: nixge: fix spelling mistake in Kconfig: "Instuments" -> "Instruments" qlcnic: Fix error code in probe mptcp: fix pending data accounting mptcp: push pending frames when subflow has free space mptcp: properly annotate nested lock mptcp: fix security context on server socket net/mlx5: Fix compilation warning for 32-bit platform mptcp: clear use_ack and use_map when dropping other suboptions devlink: use _BITUL() macro instead of BIT() in the UAPI header net: korina: fix return value net/smc: fix access to parent of an ib device ethtool: fix error paths in ethnl_set_channels() nfc: s3fwrn5: Remove unused NCI prop commands nfc: s3fwrn5: Remove the delay for NFC sleep phy: fix kdoc warning tipc: do sanity check payload of a netlink message use __netdev_notify_peers in hyperv ...
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 07:19:37 +0000