summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2012-11-21ath9k: Fix the 'xmit' debugfs fileSujith Manoharan
The 'xmit' debugfs file has become big and unwieldy, fix multiple issues with its usage: * Store TX counters/statistics only for the 4 Access Categories. Use IEEE80211_NUM_ACS instead of ATH9K_NUM_TX_QUEUES. * Move various utility macros to debug.h, they can be reused elsewhere. * Remove tx_complete_poll_work_seen. * Remove code that accesses various internal queue-specific variables without any locking whatsoever. HW/SW queue details will be handled in a subsequent patch. * Do not print internal values like txq_headidx and txq_headidx. They were mostly unused anyway, considering code like: PRX("txq_tailidx: ", txq_headidx); * Handle 'txprocdesc' for EDMA too. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21ath9k/ath9k_htc: Remove WME macrosSujith Manoharan
Use the macros provided by mac80211 and remove redundant declarations inside the drivers. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21net/wireless: ipw2200: introduce ipw_set_geo functionStanislav Yakovlev
Move regulatory domain initialization code to a separate function. Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21ath9k: stomp audio profiles on weak signal strengthRajkumar Manoharan
On lower WLAN signal strength, WLAN downlink traffic might suffer from retransmissions. At the mean time, playing SCO/A2DP profiles is affecting WLAN stability. In such scenario, by stomping SCO/A2DP BT traffic completely for a BTCOEX period, gives WLAN traffic an oppertunity to recover PHY rate. It also improves WLAN stability at lower RSSI without sacificing BT traffic. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21ath9k: Fix MCI reset in BT cal_reqRajkumar Manoharan
This patch reverts the commit "ath9k_hw: Wait BT calibration to complete" and bail out from MCI interrupt routine for chip reset. The above commit stalls the WLAN TCP traffic while bringing up and down the BT interface iteratively. Fixing this properly by queueing up chip reset and bailing out properly from tasklet routine. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21ath9k: Process FATAL interrupts at firstRajkumar Manoharan
FATAL and WATCHDOG interrupts should be processed first followed by others. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-21Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c drivers/net/wireless/iwlwifi/pcie/tx.c
2012-11-20brcmfmac: include linux/vmalloc.h from usb.cJohn W. Linville
This avoids build failures on some architectures... Signed-off-by: John W. Linville <linville@tuxdriver.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Arend van Spriel <arend@broadcom.com>
2012-11-20brcmfmac: check return from kzalloc in brcmf_fweh_process_eventJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Arend van Spriel <arend@broadcom.com>
2012-11-20brcmsmac: Remove some noisy and uninformative debug messagesSeth Forshee
These messages clutter up the trace buffer without adding any useful information. Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add tracepoint for AMPDU session informationSeth Forshee
Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add tracepoint for macintstatusSeth Forshee
Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Improve tx trace and debug supportSeth Forshee
Add the brcmsmac_tx trace system for tx debugging. Existing code to dump tx status and descriptors are converted to using tracepoints, allowing for more efficient collection and post-processing of this data. These tracepoints are placed to collect data for all tx frames instead of only on errors. Logging of tx errors is also improved. Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add brcms_dbg_ht() debug macroSeth Forshee
Also convert relevant messages to use this macro. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add brcms_dbg_dma() debug macroSeth Forshee
Also convert relevant messages to use this macro. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add brcms_dbg_int() debug macroSeth Forshee
Also convert relevant message to use this macro. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add rx and tx debug macrosSeth Forshee
Also convert relevant messages over to use thses macros. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add brcms_dbg_mac80211() debug macroSeth Forshee
This macro is used for messages related to the 802.11 MAC layer. Relevant messages are also converted to use this macro. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Use debug macros for general error and debug statementsSeth Forshee
Convert most uses of wiphy_* and pr_* for general error and debug messages to use the internal debug macros instead. Most code used only for initialization still use wiphy_err(), as well as some locations which are executed too early to use the debug macros. Some debug messages which are redundant or not useful are removed. Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add support for writing debug messages to the trace bufferSeth Forshee
Add a new brcmsmac_msg trace system to enable writing of debug messages to the trace buffer, and add brcms_* macros for storing device debug messages in the trace buffer in addition to the printk log buffer. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add module parameter for setting the debug levelSeth Forshee
The debug level can be set by passing debug=... to brcmsmac whenever CONFIG_BRCMDBG is enabled. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcm80211: Convert log message levels to debug levelsSeth Forshee
In preparation for enhancements to debug and trace support, convert the message levels to debug levels which will be used for enabling categories of debug messages. The two message levels are little-used anyway and are combined into the BRCM_DL_INFO debug level. Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcm80211: Allow trace support to be enabled separately from debugSeth Forshee
Since the runtime overhead of trace support is small when tracing is disabled, users may be interested in turning on trace support while leaving other debug features off. Add a new config option named CONFIG_BRCM_TRACING for this purpose. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Reduce number of entries in tx DMA ringsSeth Forshee
Currently up to 256 frames can be queued for each DMA ring. This is excessive, and now that we have better flow control we can get by with less. Experimentation has shown 64 to work well. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Use correct descriptor count when calculating next rx descriptorSeth Forshee
nextrxd() is calling txd(), which means that the tx descriptor count is used to determine when to wrap for determining the next ring buffer entry. This has worked so far since the driver has been using the same number of rx and tx descriptors, but it's obviously going to be a problem if different numbers of descriptors are used. Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Remove internal tx queueSeth Forshee
The brcmsmac internal tx buffering is problematic. The amount of buffering is excessive (228 packets in addition to the 256 slots in each DMA ring), and frames may be dropped due to a lack of flow control. This patch reworks the transmit code path to remove the internal buffering. Frames are immediately handed off to the DMA support rather than passing through an intermediate queue. Non-aggregate frames are queued immediately into the tx rings, and aggregate frames are queued temporarily in an AMPDU session until ready for transmit. Transmit flow control is also added to avoid dropping packets when the tx rings are full. Conceptually this is a separate change, but it's included in this commit because removing the tx queue without adding flow control could cause significant problems. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Use IEEE 802.11 AC levels for pktq precedence levelsSeth Forshee
The mac80211 tx queues and brcmsmac DMA fifos both map directly to AC levels. Therefore it's much more straightforward to queue tx frames and choose the tx fifo based on the mac80211 queue instead of mapping 802.1D priority tags to precedence levels then back to AC levels. mac80211 already maps the 802.1D levels to the appropriate AC levels and queues management frames at the maximum priority, so the results should be identical. One functional change resulting from this patch is that AMPDU retries no longer get a priority boost to queue them ahead of packets with the same priority already in the tx queue. This behavior will be restored (in effect at least) in a later patch when the tx queue is removed. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Remove unimplemented flow control functionsSeth Forshee
Functions for flow control exist but remain unimplemented. Remove these in advance of adding real flow control. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Add helper function for updating txavail countSeth Forshee
Use this helper function rather than open-coding the same calculation in multiple places. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Don't weight AMPDU packets in txfifoSeth Forshee
According to the comments this "reduces rate lag," but in reality the only way this value is used is for determining whether or not any frames remain to be transmitted. Therefore there's no reason for AMPDU packets to receive any weighting. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-20brcmsmac: Introduce AMPDU sessions for assembling AMPDUsSeth Forshee
AMPDU session allows MPDUs to be temporarily queued until either a full AMPDU has been collected or circumstances dictate that transmission should start with a partial AMPDU. Packets are added to the session by calling brcms_c_ampdu_add_frame(). brcms_c_ampdu_finalize() should be called to fix up the tx headers in the first and last packet before adding the packets to the DMA ring. brmcs_c_sendampdu() is converted to using AMPDU sessions. This patch has no real value on it's own, but is needed in preparation for elimination of the tx packet queue from brcmsmac. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Tested-by: Daniel Wagner <wagi@monom.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-19Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2012-11-19ath9k: Fix BTCOEX debugfs file usageSujith Manoharan
The debugfs file for dumping btcoex parameters unconditionally assumes a MCI-based device. This will not work for older btcoex chips. Fix this by branching out the routine into separate functions. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-19ath9k_hw: Fix regression in device resetSujith Manoharan
Commit "ath9k: improve suspend/resume reliability" broke ath9k_htc and bringing up the device would hang indefinitely. Fix this. Cc: stable@vger.kernel.org Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-18iwlwifi: don't WARN when a non empty queue is disabledEmmanuel Grumbach
This can happen when we shut down suddenly an interface. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-16mwifiex: report error to MMC core if we cannot suspendBing Zhao
When host_sleep_config command fails we should return error to MMC core to indicate the failure for our device. The misspelled variable is also removed as it's redundant. Cc: "3.0+" <stable@vger.kernel.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16mwifiex: fix system hang issue in cmd timeout error caseBing Zhao
Reported by Tim Shepard: I was seeing sporadic failures (wedgeups), and the majority of those failures I saw printed the printouts in mwifiex_cmd_timeout_func with cmd = 0xe5 which is CMD_802_11_HS_CFG_ENH. When this happens, two minutes later I get notified that the rtcwake thread is blocked, like this: INFO: task rtcwake:3495 blocked for more than 120 seconds. To get the hung thread unblocked we wake up the cmd wait queue and cancel the ioctl. Cc: "3.4+" <stable@vger.kernel.org> Reported-by: Tim Shepard <shep@laptop.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16rtlwifi: rtl8192cu: Add new USB IDAlbert Pool
This is an ISY IWL 2000. Probably a clone of Belkin F7D1102 050d:1102. Its FCC ID is the same. Signed-off-by: Albert Pool <albertpool@solcon.nl> Cc: stable@vger.kernel.org Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16ath9k_hw: Program filter coefficients correctlySujith Manoharan
2484 Mhz (Japan) usage requires filter coefficients to be programmed in the CCK TX FIR registers. This is required for AR9331, AR9485 and AR9462. Fix this and also remove a few useless macros and a duplicate variable. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16mwifiex: don't select lib80211Johannes Berg
The driver doesn't use any lib80211 symbols so it shouldn't select it in Kconfig. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16rtlwifi: use eth_zero_addr() to assign zero addressWei Yongjun
Using eth_zero_addr() to assign zero address insetad of memset() or an inefficient copy from a static array. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16net/wireless: ipw2x00: remove unreachable codeStanislav Yakovlev
Remove unnecessary if statements because libipw_set_geo always returns success. Also change function's return value from int to void. Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16brcmfmac: code cleanupHante Meuleman
Removing obsolete functions and prototypes. Moving (and renaming) defines to place with similar definitions. Removing unnecessary includes. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16brcmfmac: limit hex dump on fwil.Hante Meuleman
When debug is turned on for fwil then the whole data buffer is dumped. In some cases this gives excessive amount of debug. With this patch the dumps are limited to 64 bytes. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16brcmfmac: sdio module load fix.Hante Meuleman
On sdio module unload followed by load (without removing the device) the access window should be moved back to enumeration space. Force this by removing initialisation of sbwad during probe. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16brcmfmac: avoid usage of func->card->dev in sdio probe.Hante Meuleman
brcmf_ops_sdio_probe used the private_date func->card->dev to store device data of brcmfmac sdio. This is not a good place to store the data. Use dev of func and use func->card->sdio_func to group the functions the driver is using. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16brcmfmac: sdio unload fix.Hante Meuleman
on sdio remove the bus_if should be configured for close, so new data from higher layers will be blocked. Also the access to bus_if in the watchdog should be checked for null pointer access on sdio remove. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16brcmfmac: Handle mmc exceptions during init correct.Hante Meuleman
when brcmf_sdbrcm_probe_attach results in error then cleanup will result in null pointer access. In brcmf_sdbrcm_release and in brcmf_ops_sdio_remove. This patch fixes order of init and de-init. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16brcmfmac: Any error should result in failure of probe.Hante Meuleman
In brcmf_sdbrcm_probe only error ELINK is seen as error. However brcmf_bus_start can return many more error codes and all should result in failed init of driver. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-16brcmfmac: restructure handling of IF eventArend van Spriel
The IF event need special care. It can be either an ADD, DEL, or CHANGE. For an ADD we need to call brcmf_add_if() before the event handler call. Upon a DEL we need to call brcmf_del_if() after the event handler call. CHANGE does not require special attention. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-26 15:38:04 +0000