summaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2020-09-07Revert "wlcore: Adding suppoprt for IGTK key in wlcore driver"Mauro Carvalho Chehab
This patch causes a regression betwen Kernel 5.7 and 5.8 at wlcore: with it applied, WiFi stops working, and the Kernel starts printing this message every second: wlcore: PHY firmware version: Rev 8.2.0.0.242 wlcore: firmware booted (Rev 8.9.0.0.79) wlcore: ERROR command execute failure 14 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 133 at drivers/net/wireless/ti/wlcore/main.c:795 wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore] Modules linked in: wl18xx wlcore mac80211 libarc4 cfg80211 rfkill snd_soc_hdmi_codec crct10dif_ce wlcore_sdio adv7511 cec kirin9xx_drm(C) kirin9xx_dw_drm_dsi(C) drm_kms_helper drm ip_tables x_tables ipv6 nf_defrag_ipv6 CPU: 0 PID: 133 Comm: kworker/0:1 Tainted: G WC 5.8.0+ #186 Hardware name: HiKey970 (DT) Workqueue: events_freezable ieee80211_restart_work [mac80211] pstate: 60000005 (nZCv daif -PAN -UAO BTYPE=--) pc : wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore] lr : wl12xx_queue_recovery_work+0x24/0x30 [wlcore] sp : ffff8000126c3a60 x29: ffff8000126c3a60 x28: 00000000000025de x27: 0000000000000010 x26: 0000000000000005 x25: ffff0001a5d49e80 x24: ffff8000092cf580 x23: ffff0001b7c12623 x22: ffff0001b6fcf2e8 x21: ffff0001b7e46200 x20: 00000000fffffffb x19: ffff0001a78e6400 x18: 0000000000000030 x17: 0000000000000001 x16: 0000000000000001 x15: ffff0001b7e46670 x14: ffffffffffffffff x13: ffff8000926c37d7 x12: ffff8000126c37e0 x11: ffff800011e01000 x10: ffff8000120526d0 x9 : 0000000000000000 x8 : 3431206572756c69 x7 : 6166206574756365 x6 : 0000000000000c2c x5 : 0000000000000000 x4 : ffff0001bf1361e8 x3 : ffff0001bf1790b0 x2 : 0000000000000000 x1 : ffff0001a5d49e80 x0 : 0000000000000001 Call trace: wl12xx_queue_recovery_work.part.0+0x6c/0x74 [wlcore] wl12xx_queue_recovery_work+0x24/0x30 [wlcore] wl1271_cmd_set_sta_key+0x258/0x25c [wlcore] wl1271_set_key+0x7c/0x2dc [wlcore] wlcore_set_key+0xe4/0x360 [wlcore] wl18xx_set_key+0x48/0x1d0 [wl18xx] wlcore_op_set_key+0xa4/0x180 [wlcore] ieee80211_key_enable_hw_accel+0xb0/0x2d0 [mac80211] ieee80211_reenable_keys+0x70/0x110 [mac80211] ieee80211_reconfig+0xa00/0xca0 [mac80211] ieee80211_restart_work+0xc4/0xfc [mac80211] process_one_work+0x1cc/0x350 worker_thread+0x13c/0x470 kthread+0x154/0x160 ret_from_fork+0x10/0x30 ---[ end trace b1f722abf9af5919 ]--- wlcore: WARNING could not set keys wlcore: ERROR Could not add or replace key wlan0: failed to set key (4, ff:ff:ff:ff:ff:ff) to hardware (-5) wlcore: Hardware recovery in progress. FW ver: Rev 8.9.0.0.79 wlcore: pc: 0x0, hint_sts: 0x00000040 count: 39 wlcore: down wlcore: down ieee80211 phy0: Hardware restart was requested mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) mmc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0) wlcore: PHY firmware version: Rev 8.2.0.0.242 wlcore: firmware booted (Rev 8.9.0.0.79) wlcore: ERROR command execute failure 14 ------------[ cut here ]------------ Tested on Hikey 970. This reverts commit 2b7aadd3b9e17e8b81eeb8d9cc46756ae4658265. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/f0a2cb7ea606f1a284d4c23cbf983da2954ce9b6.1598420968.git.mchehab+huawei@kernel.org
2020-08-27mwifiex: Increase AES key storage size to 256 bitsMaximilian Luz
Following commit e18696786548 ("mwifiex: Prevent memory corruption handling keys") the mwifiex driver fails to authenticate with certain networks, specifically networks with 256 bit keys, and repeatedly asks for the password. The kernel log repeats the following lines (id and bssid redacted): mwifiex_pcie 0000:01:00.0: info: trying to associate to '<id>' bssid <bssid> mwifiex_pcie 0000:01:00.0: info: associated to bssid <bssid> successfully mwifiex_pcie 0000:01:00.0: crypto keys added mwifiex_pcie 0000:01:00.0: info: successfully disconnected from <bssid>: reason code 3 Tracking down this problem lead to the overflow check introduced by the aforementioned commit into mwifiex_ret_802_11_key_material_v2(). This check fails on networks with 256 bit keys due to the current storage size for AES keys in struct mwifiex_aes_param being only 128 bit. To fix this issue, increase the storage size for AES keys to 256 bit. Fixes: e18696786548 ("mwifiex: Prevent memory corruption handling keys") Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Reported-by: Kaloyan Nikolov <konik98@gmail.com> Tested-by: Kaloyan Nikolov <konik98@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200825153829.38043-1-luzmaximilian@gmail.com
2020-08-27mt76: mt7915: use ieee80211_free_txskb to free tx skbsFelix Fietkau
Using dev_kfree_skb for tx skbs breaks AQL. This worked until now only by accident, because a mac80211 issue breaks AQL on drivers with firmware rate control that report the rate via ieee80211_tx_status_ext as struct rate_info. Signed-off-by: Felix Fietkau <nbd@nbd.name> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200812144943.91974-1-nbd@nbd.name
2020-08-27mt76: mt7615: use v1 MCU API on MT7615 to fix issues with adding/removing ↵Felix Fietkau
stations The implementation of embedding WTBL update inside the STA_REC update is buggy on the MT7615 v2 firmware. This leads to connection issues after a station has connected and disconnected again. Switch to the v1 MCU API ops, since they have received much more testing and should be more stable. On MT7622 and later, the v2 API is more actively used, so we should keep using it as well. Fixes: 6849e29ed92e ("mt76: mt7615: add starec operating flow for firmware v2") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200812102332.11812-1-nbd@nbd.name
2020-08-18brcmfmac: reserve tx credit only when txctl is ready to sendWright Feng
The 4329 throughput drops from 40.2 Mbits/sec to 190 Kbits/sec in 2G 11n mode because the commit b41c232d33666 ("brcmfmac: reserve 2 credits for host tx control path"). To fix the issue, host driver only reserves tx control credit when there is a txctl frame is pending to send. And we also check available credit by using "not equal to 0" instead of "greater than 0" because tx_max and tx_seq are circled positive numbers. Reported-by: Dmitry Osipenko <digetx@gmail.com> Fixes: b41c232d33666 ("brcmfmac: reserve 2 credits for host tx control path") Signed-off-by: Wright Feng <wright.feng@cypress.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200813070017.89023-1-wright.feng@cypress.com
2020-08-14rtl818x: constify ioreadX() iomem argument (as in generic implementation)Krzysztof Kozlowski
The ioreadX() helpers have inconsistent interface. On some architectures void *__iomem address argument is a pointer to const, on some not. Implementations of ioreadX() do not modify the memory under the address so they can be converted to a "const" version for const-safety and consistency among architectures. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kalle Valo <kvalo@codeaurora.org> Cc: Allen Hubbe <allenbh@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jakub Kicinski <kuba@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200709072837.5869-3-krzk@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc updates from Andrew Morton: - a few MM hotfixes - kthread, tools, scripts, ntfs and ocfs2 - some of MM Subsystems affected by this patch series: kthread, tools, scripts, ntfs, ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore, sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (162 commits) mm: vmscan: consistent update to pgrefill mm/vmscan.c: fix typo khugepaged: khugepaged_test_exit() check mmget_still_valid() khugepaged: retract_page_tables() remember to test exit khugepaged: collapse_pte_mapped_thp() protect the pmd lock khugepaged: collapse_pte_mapped_thp() flush the right range mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible mm: thp: replace HTTP links with HTTPS ones mm/page_alloc: fix memalloc_nocma_{save/restore} APIs mm/page_alloc.c: skip setting nodemask when we are in interrupt mm/page_alloc: fallbacks at most has 3 elements mm/page_alloc: silence a KASAN false positive mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask() mm/page_alloc.c: simplify pageblock bitmap access mm/page_alloc.c: extract the common part in pfn_to_bitidx() mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits mm/shuffle: remove dynamic reconfiguration mm/memory_hotplug: document why shuffle_zone() is relevant mm/page_alloc: remove nr_free_pagecache_pages() mm: remove vm_total_pages ...
2020-08-07mm, treewide: rename kzfree() to kfree_sensitive()Waiman Long
As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [akpm@linux-foundation.org: fs/crypto/inline_crypt.c needs linux/slab.h] [akpm@linux-foundation.org: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Howells <dhowells@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Joe Perches <joe@perches.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: "Jason A . Donenfeld" <Jason@zx2c4.com> Link: http://lkml.kernel.org/r/20200616154311.12314-3-longman@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-06Merge tag 'thermal-v5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add support to enable/disable the thermal zones resulting on core code and drivers cleanup (Andrzej Pietrasiewicz) - Add generic netlink support for userspace notifications: events, temperature and discovery commands (Daniel Lezcano) - Fix redundant initialization for a ret variable (Colin Ian King) - Remove the clock cooling code as it is used nowhere (Amit Kucheria) - Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian Rotariu) - Replace all references to thermal.txt in the documentation to the corresponding yaml files (Amit Kucheria) - Add maintainer entry for the IPA (Lukasz Luba) - Add support for MSM8939 for the tsens (Shawn Guo) - Update power allocator and devfreq cooling to SPDX licensing (Lukasz Luba) - Add Cannon Lake Low Power PCH support (Sumeet Pawnikar) - Add tsensor support for V2 mediatek thermal system (Henry Yen) - Fix thermal zone lookup by ID for the core code (Thierry Reding) * tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits) thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support thermal: mediatek: Add tsensor support for V2 thermal system thermal: mediatek: Prepare to add support for other platforms thermal: Update power allocator and devfreq cooling to SPDX licensing MAINTAINERS: update entry to thermal governors file name prefixing thermal: core: Add thermal zone enable/disable notification thermal: qcom: tsens-v0_1: Add support for MSM8939 dt-bindings: tsens: qcom: Document MSM8939 compatible thermal: core: Fix thermal zone lookup by ID thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id thermal: imx8mm: Support module autoloading thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor() MAINTAINERS: Add maintenance information for IPA thermal: rcar_gen3_thermal: Do not shadow thcode variable dt-bindings: thermal: Get rid of thermal.txt and replace references thermal: core: Move initialization after core initcall thermal: netlink: Improve the initcall ordering net: genetlink: Move initialization to core_initcall thermal: rcar_gen3_thermal: Add r8a774e1 support thermal/drivers/clock_cooling: Remove clock_cooling code ...
2020-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...
2020-08-05Merge tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Add a new host cap bit and a corresponding DT property, to support power cycling of the card by FW at system suspend/resume. - Fix clock rate setting for SDIO in SDR12/SDR25 speed-mode - Fix switch to 1/4-bit mode at system suspend/resume for SD-combo cards - Convert the mmc-pwrseq DT bindings to the json-schema - Always allow the card detect uevent to be consumed by userspace MMC host controllers: - Convert a few DT bindings to the json-schema - mtk-sd: - Add support for command queue through cqhci - Add support for the MT6779 variant - renesas_sdhi_internal_dmac: - Fix dma unmapping in the error path - sdhci_am654: - Add support for the AM65x PG2.0 variant - Extend support for phys/clocks - sdhci-cadence: - Drop incorrect HW tuning for SD mode - sdhci-msm: - Add support for interconnect bandwidth scaling - Enable internal voltage control - Enable low power state for pinctrls - sdhci-of-at91: - Ludovic Desroches handovers maintenance to Eugen Hristev - sdhci-pci-gli: - Improve clock handling for GL975x - sdhci-pci-o2micro: - Add HW tuning for SDR104 mode - Fix support for O2 host controller Seabird1" * tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (66 commits) mmc: mediatek: make function msdc_cqe_disable() static MAINTAINERS: mmc: sdhci-of-at91: handover maintenance to Eugen Hristev dt-bindings: mmc: mediatek: Add document for mt6779 mmc: mediatek: command queue support mmc: mediatek: refine msdc timeout api mmc: mediatek: add MT6779 MMC driver support mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 mode mmc: sdhci-pci-o2micro: Bug fix for O2 host controller Seabird1 mmc: via-sdmmc: use generic power management memstick: jmb38x_ms: use generic power management mmc: sdhci-cadence: do not use hardware tuning for SD mode mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL975x mmc: cqhci: Fix a print format for the task descriptor mmc: sdhci-of-arasan: fix timings allocation code mmc: sdhci: Fix a potential uninitialized variable dt-bindings: mmc: renesas,sdhi: convert to YAML dt-bindings: mmc: convert arasan sdhci bindings to yaml mmc: sdhci: Fix potential null pointer access while accessing vqmmc mmc: core: Add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND dt-bindings: mmc: Add full-pwr-cycle-in-suspend property ...
2020-08-04Merge tag 'uninit-macro-v5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull uninitialized_var() macro removal from Kees Cook: "This is long overdue, and has hidden too many bugs over the years. The series has several "by hand" fixes, and then a trivial treewide replacement. - Clean up non-trivial uses of uninitialized_var() - Update documentation and checkpatch for uninitialized_var() removal - Treewide removal of uninitialized_var()" * tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: compiler: Remove uninitialized_var() macro treewide: Remove uninitialized_var() usage checkpatch: Remove awareness of uninitialized_var() macro mm/debug_vm_pgtable: Remove uninitialized_var() usage f2fs: Eliminate usage of uninitialized_var() macro media: sur40: Remove uninitialized_var() usage KVM: PPC: Book3S PR: Remove uninitialized_var() usage clk: spear: Remove uninitialized_var() usage clk: st: Remove uninitialized_var() usage spi: davinci: Remove uninitialized_var() usage ide: Remove uninitialized_var() usage rtlwifi: rtl8192cu: Remove uninitialized_var() usage b43: Remove uninitialized_var() usage drbd: Remove uninitialized_var() usage x86/mm/numa: Remove uninitialized_var() usage docs: deprecated.rst: Add uninitialized_var()
2020-08-04Merge tag 'wireless-drivers-next-2020-08-04' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.9 Second set of patches for v5.9. mt76 has most of patches this time. Otherwise it's just smaller fixes and cleanups to other drivers. There was a major conflict in mt76 driver between wireless-drivers and wireless-drivers-next. I solved that by merging the former to the latter. Major changes: rtw88 * add support for ieee80211_ops::change_interface * add support for enabling and disabling beacon * add debugfs file for testing h2c mt76 * ARP filter offload for 7663 * runtime power management for 7663 * testmode support for mfg calibration * support for more channels ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo
mt76 driver had major conflicts within mt7615 directory. To make it easier for every merge wireless-drivers to wireless-drivers-next and solve those conflicts.
2020-08-02brcmfmac: Set timeout value when configuring power saveNicolas Saenz Julienne
Set the timeout value as per cfg80211's set_power_mgmt() request. If the requested value value is left undefined we set it to 2 seconds, the maximum supported value. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200721112302.22718-1-nsaenzjulienne@suse.de
2020-08-02wl1251: fix always return 0 errorWang Hai
wl1251_event_ps_report() should not always return 0 because wl1251_ps_set_mode() may fail. Change it to return 'ret'. Fixes: f7ad1eed4d4b ("wl1251: retry power save entry") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200730073939.33704-1-wanghai38@huawei.com
2020-08-02airo: use generic power managementVaibhav Gupta
Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers. Switch to generic power management framework using a single "struct dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions, as through the generic framework PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200728114128.1218310-1-vaibhavgupta40@gmail.com
2020-08-02intersil: fix wiki website urlFlavio Suligoi
In some Intersil files, the wiki url is still the old "wireless.kernel.org" instead of the new "wireless.wiki.kernel.org" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200723135254.594984-1-f.suligoi@asem.it
2020-08-02qtnfmac: Missing platform_device_unregister() on error in qtnf_core_mac_alloc()Wang Hai
Add the missing platform_device_unregister() before return from qtnf_core_mac_alloc() in the error handling case. Fixes: 616f5701f4ab ("qtnfmac: assign each wiphy to its own virtual platform device") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200730064910.37589-1-wanghai38@huawei.com
2020-08-02ipw2x00: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'ipw2100_msg_allocate()' (ipw2100.c), GFP_KERNEL can be used because it is called from the probe function. The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_msg_allocate Moreover, 'ipw2100_msg_allocate()' already uses GFP_KERNEL for some other memory allocations. When memory is allocated in 'status_queue_allocate()' (ipw2100.c), GFP_KERNEL can be used because it is called from the probe function. The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_rx_allocate --> status_queue_allocate Moreover, 'ipw2100_rx_allocate()' already uses GFP_KERNEL for some other memory allocations. When memory is allocated in 'bd_queue_allocate()' (ipw2100.c), GFP_KERNEL can be used because it is called from the probe function. The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_rx_allocate --> bd_queue_allocate Moreover, 'ipw2100_rx_allocate()' already uses GFP_KERNEL for some other memory allocations. When memory is allocated in 'ipw2100_tx_allocate()' (ipw2100.c), GFP_KERNEL can be used because it is called from the probe function. The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_tx_allocate Moreover, 'ipw2100_tx_allocate()' already uses GFP_KERNEL for some other memory allocations. When memory is allocated in 'ipw_queue_tx_init()' (ipw2200.c), GFP_KERNEL can be used because it is called from a call chain that already uses GFP_KERNEL and no spin_lock is taken in the between. The call chain is: ipw_up --> ipw_load --> ipw_queue_reset --> ipw_queue_tx_init 'ipw_up()' already uses GFP_KERNEL for some other memory allocations. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200722101716.26185-1-christophe.jaillet@wanadoo.fr
2020-08-02ipw2100: Use GFP_KERNEL instead of GFP_ATOMIC in some memory allocationChristophe JAILLET
The call chain is: ipw2100_pci_init_one (the probe function) --> ipw2100_queues_allocate --> ipw2100_tx_allocate No lock is taken in the between. So it is safe to use GFP_KERNEL in 'ipw2100_tx_allocate()'. BTW, 'ipw2100_queues_allocate()' also calls 'ipw2100_msg_allocate()' which already allocates some memory using GFP_KERNEL. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200722101701.26126-1-christophe.jaillet@wanadoo.fr
2020-08-02hostap: use generic power managementVaibhav Gupta
Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers. Switch to generic power management framework using a single "struct dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions as through the generic framework, PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200721150547.371763-1-vaibhavgupta40@gmail.com
2020-08-02b43legacy: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200719111124.58167-1-grandmaster@al2klimov.de
2020-08-02b43: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200719110115.58085-1-grandmaster@al2klimov.de
2020-08-02ipw2x00: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200718100240.98593-1-grandmaster@al2klimov.de
2020-08-02rt2x00: pci: use generic power managementVaibhav Gupta
Drivers using legacy PM have to manage PCI states and device's PM states themselves. They also need to take care of configuration registers. With improved and powerful support of generic PM, PCI Core takes care of above mentioned, device-independent, jobs. The callbacks make use of PCI helper functions like pci_save/restore_state(), pci_enable/disable_device() and pci_set_power_state() to do required operations. In generic mode, they are no longer needed. Change function parameter in both .suspend() and .resume() to "struct device*" type. Use dev_get_drvdata() to get drv data. The .suspend() callback is invoking rt2x00lib_suspend() which needs to be modified as generic rt2x00pci_suspend() has no pm_message_t type argument, passed to it, which is required by it according to its declaration. Although this variable remained unused in the function body. Hence, remove it from the function definition & declaration. rt2x00lib_suspend() is also invoked by rt2x00usb_suspend() and rt2x00soc_suspend(). Thus, modify the functional call accordingly in their function body. Earlier, .suspend() & .resume() were exported and were used by the following drivers: - drivers/net/wireless/ralink/rt2x00/rt2400pci.c - drivers/net/wireless/ralink/rt2x00/rt2500pci.c - drivers/net/wireless/ralink/rt2x00/rt2800pci.c - drivers/net/wireless/ralink/rt2x00/rt61pci.c Now, we only need to bind "struct dev_pm_ops" variable to "struct pci_driver". Thus, make the callbacks static. Declare an "extern const struct dev_pm_ops" variable and bind PM callbacks to it. Now, export the variable instead and use it in respective drivers. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200717110928.454867-1-vaibhavgupta40@gmail.com
2020-08-02wilc1000: Move wilc1000 SDIO ID's from driver source to common header fileAjay Singh
Moved macros used for Vendor/Device ID from wilc1000 driver to common header file and changed macro name for consistency with other macros. Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Pali Rohár <pali@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200717051134.19160-1-ajay.kathat@microchip.com
2020-08-02mt7601u: add missing release on skb in mt7601u_mcu_msg_sendNavid Emamdoost
In the implementation of mt7601u_mcu_msg_send(), skb is supposed to be consumed on all execution paths. Release skb before returning if test_bit() fails. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200718052630.11032-1-navid.emamdoost@gmail.com
2020-08-02iwlwifi: yoyo: don't print failure if debug firmware is missingWolfram Sang
Missing this firmware is not fatal, my wifi card still works. Even more, I couldn't find any documentation what it is or where to get it. So, I don't think the users should be notified if it is missing. If you browse the net, you see the message is present is in quite some logs. Better remove it. Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200625165210.14904-1-wsa@kernel.org
2020-08-02rtw88: 8821c: coex: add functions and parametersPing-Cheng Chen
Without this patch, RTL8821CE will not have coex support, and will crash the system because of the NULL pointers for the coex functions. While RTL8822C series are WiFi + BT combo chips, it needs the co-existence mechanism for the device to work on both WiFi and BT without interfering each other. And the coex support has already been added before, most of the mechanisms are implemented. The driver should just add corresponding functions to operate on different types of chips and its coex parameters. Fixes: f745eb9ca5bf ("rtw88: 8821c: Add 8821CE to Kconfig and Makefile") Signed-off-by: Ping-Cheng Chen <pc.chen@realtek.com> Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200724054208.31115-1-yhchuang@realtek.com
2020-08-02rtw88: 8821c: make symbol 'rtw8821c_rtw_pwr_track_tbl' staticWei Yongjun
The sparse tool complains as follows: drivers/net/wireless/realtek/rtw88/rtw8821c.c:1374:32: warning: symbol 'rtw8821c_rtw_pwr_track_tbl' was not declared. Should it be static? This variable is not used outside of rtw8821c.c, so this commit marks it static. Fixes: 3a4312828ce1 ("rtw88: 8821c: add power tracking") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200721134901.33968-1-weiyongjun1@huawei.com
2020-08-02rtw88: add h2c command in debugfsTzu-En Huang
It's very useful to send H2C command for debug usage. Add an entry for sending H2C command to firmware. usage example: echo 42,00,00,43,02,00,00,00 > /sys/kernel/debug/ieee80211/phyX/rtw88 Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200717064937.27966-8-yhchuang@realtek.com
2020-08-02rtw88: allows driver to enable/disable beaconYan-Hsuan Chuang
Enable/disable beacon accordingly when the BSS info changed. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200717064937.27966-7-yhchuang@realtek.com
2020-08-02rtw88: add ieee80211_ops::change_interfaceYan-Hsuan Chuang
Sometimes mac80211 will just ask driver to change the interface instead of to remove and then add a new one. And for driver, to change the interface is just simply to remove and add a new one but change the type of it. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200717064937.27966-6-yhchuang@realtek.com
2020-08-02rtw88: coex: only skip coex triggered by BT infoYan-Hsuan Chuang
The coex mechanism used to skip upon the freeze flag is raised. That will cause the coex mechanism being skipped unexpectedly. Coex only wanted to keep the TDMA table from being changed by BT side. So, check the freeze and reason, if the coex reason is coming from BT info, skip it, to make sure the coex triggered by Wifi itself can work. This is required for the AP mode, while the control flow is different with STA mode. When starting an AP mode, the AP mode needs to start working immedaitely after leaving IPS, and the freeze flag could be raised. If the coex info is skipped, then the AP mode will not set the antenna owner, leads to TX stuck. Fixes: 4136214f7c46 ("rtw88: add BT co-existence support") Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200717064937.27966-5-yhchuang@realtek.com
2020-08-02rtw88: update tx descriptor of mgmt and reserved page packetsTzu-En Huang
Previous settings for TX descriptors of and reserved page packets are insufficient. For the sequence number of packets downloaded to reserved page, it should be filled by hardware. And for ps-poll packets in reserved page, to prevent AID being changed by hardware, NAVUSEHDR should be set. Additionally, the rate should be adjusted based on the current band for mgmt and reserved page packets. Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200717064937.27966-4-yhchuang@realtek.com
2020-08-02rtw88: fix short GI capability based on current bandwidthTsang-Shian Lin
Fix the transmission is not sent with short GI under some conditions even if the receiver supports short GI. If VHT capability IE exists in the beacon, the original code uses the short GI for 80M field as driver's short GI setting for transmission, even the current bandwidth is not 80MHz. Short GI supported fields for 20M/40M are informed in HT capability information element, and short GI supported field for 80M is informed in VHT capability information element. These three fields may be set to different values. Driver needs to record each short GI support field for each bandwidth, and send correct info depends on current bandwidth to the WiFi firmware. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200717064937.27966-3-yhchuang@realtek.com
2020-08-02rtw88: fix LDPC field for RA infoTsang-Shian Lin
Convert the type of LDPC field to boolen because LDPC field of RA info H2C command to firmware is only one bit. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200717064937.27966-2-yhchuang@realtek.com
2020-08-02prism54: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'islpci_alloc_memory()' (islpci_dev.c), GFP_KERNEL can be used because it is only called from a probe function and no spin_lock is taken in the between. The call chain is: prism54_probe (probe function, in 'islpci_hotplug.c') --> islpci_setup (in 'islpci_dev.c') --> islpci_alloc_memory (in 'islpci_dev.c') @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200722104534.30760-1-christophe.jaillet@wanadoo.fr
2020-08-02prism54: islpci_hotplug: use generic power managementVaibhav Gupta
Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers. Switch to generic power management framework using a single "struct dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions as through the generic framework, PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200721125514.145607-1-vaibhavgupta40@gmail.com
2020-08-02prism54: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200719121224.58581-1-grandmaster@al2klimov.de
2020-08-02p54: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'p54p_probe()', GFP_KERNEL can be used because it is the probe function and no spin_lock is taken in the between. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200722102707.27486-1-christophe.jaillet@wanadoo.fr
2020-08-02mwifiex: 11n_rxreorder: Remove unnecessary cast in kfree()Xu Wang
Remove unnecassary casts in the argument to kfree. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200727020405.8476-1-vulab@iscas.ac.cn
2020-08-02rtlwifi: btcoex: use %*ph to print small bufferAndy Shevchenko
Use %*ph format to print small buffer as hex string. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200730154026.39901-1-andriy.shevchenko@linux.intel.com
2020-08-02rtlwifi: btcoex: remove redundant initialization of variables ant_num and ↵Colin Ian King
single_ant_path The variables ant_num and single_ant_path are being initialized with a value that is never read and are being updated later with a new value. The initializations are redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200723163214.995226-1-colin.king@canonical.com
2020-07-31Merge tag 'mac80211-next-for-davem-2020-07-31' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== We have a number of changes * code cleanups and fixups as usual * AQL & internal TXQ improvements from Felix * some mesh 802.1X support bits * some injection improvements from Mathy of KRACK fame, so we'll see what this results in ;-) * some more initial S1G supports bits, this time (some of?) the userspace APIs ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2020-07-31 Here's the main bluetooth-next pull request for 5.9: - Fix firmware filenames for Marvell chipsets - Several suspend-related fixes - Addedd mgmt commands for runtime configuration - Multiple fixes for Qualcomm-based controllers - Add new monitoring feature for mgmt - Fix handling of legacy cipher (E4) together with security level 4 - Add support for Realtek 8822CE controller - Fix issues with Chinese controllers using fake VID/PID values - Multiple other smaller fixes & improvements ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31cfg80211: invert HE BSS color 'disabled' to 'enabled'Johannes Berg
This is in fact 'disabled' in the spec, but there it's in a place where that actually makes sense. In our internal data structures, it doesn't really make sense, and in fact the previous commit just fixed a bug in that area. Make this safer by inverting the polarity from 'disabled' to 'enabled'. Link: https://lore.kernel.org/r/20200730130051.5d8399545bd9.Ie62fdcd1a6cd9c969315bc124084a494ca6c8df3@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31mac80211: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20200707204548.GA9320@embeddedor Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-07-31nl80211: S1G band and channel definitionsThomas Pedersen
Gives drivers the definitions needed to advertise support for S1G bands. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200602062247.23212-1-thomas@adapt-ip.com Link: https://lore.kernel.org/r/20200731055636.795173-1-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 08:38:49 +0000