summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtl8xxxu
AgeCommit message (Collapse)Author
2021-02-08rtl8xxxu: remove unused assignment valuewengjianfeng
at first, ret was assigned to zero, but later assigned to a funciton,so the assignment to zero is no use, which can simple be removed instead. Signed-off-by: wengjianfeng <wengjianfeng@yulong.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210130072310.17252-1-samirweng1979@163.com
2020-09-09rtl8xxxu: prevent potential memory leakChris Chiu
Free the skb if usb_submit_urb fails on rx_urb. And free the urb no matter usb_submit_urb succeeds or not in rtl8xxxu_submit_int_urb. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200906040424.22022-1-chiu@endlessm.com
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-03-26rtl8xxxu: Feed current txrate information for mac80211Chris Chiu
The nl80211 commands such as 'iw link' can't get current txrate information from the driver. This commit fills in the tx rate information from the C2H RA report in the sta_statistics function. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200320063833.1058-3-chiu@endlessm.com
2020-03-26rtl8xxxu: add enumeration for channel bandwidthChris Chiu
There's a data field in H2C and C2H commands which is used to carry channel bandwidth information. Add enumeration to make it more descriptive in code. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200320063833.1058-2-chiu@endlessm.com
2020-03-23rtl8xxxu: Fix sparse warning: cast from restricted __le16Chris Chiu
Fix the warning reported by sparse as: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:4819:17: sparse: sparse: cast from restricted __le16 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:4892:17: sparse: sparse: cast from restricted __le16 Signed-off-by: Chris Chiu <chiu@endlessm.com> Reported-by: kbuild test robot <lkp@intel.com> Acked-by: Jes Sorensen <jes@trained-monkey.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200319064341.49500-1-chiu@endlessm.com
2020-03-23wireless: realtek: Replace zero-length array with flexible-array memberGustavo A. R. Silva
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200225002746.GA26789@embeddedor
2019-12-18rtl8xxxu: fix interface sanity checkJohan Hovold
Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)") Cc: stable <stable@vger.kernel.org> # 4.4 Cc: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-20rtl8xxxu: Remove set but not used variable 'vif','dev','len'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5396:24: warning: variable vif set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5397:17: warning: variable dev set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_c2hcmd_callback: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:5400:6: warning: variable len set but not used [-Wunused-but-set-variable] They are introduced by commit e542e66b7c2e ("rtl8xxxu: add bluetooth co-existence support for single antenna"), but never used, so remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-15rtl8xxxu: Remove set but not used variable 'rsr'Zheng Yongjun
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function rtl8xxxu_gen2_config_channel: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:1266:13: warning: variable rsr set but not used [-Wunused-but-set-variable] rsr is never used, so remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-14rtl8xxxu: Add support for Edimax EW-7611ULBJes Sorensen
A number of people have reported the Edimax EW-7611ULB works fine. Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtl8xxxu: fix warnings for symbol not declaredChris Chiu
Fix the following sparse warnings. sparse: symbol 'rtl8723bu_set_coex_with_type' was not declared. Should it be static? sparse: symbol 'rtl8723bu_update_bt_link_info' was not declared. Should it be static? sparse: symbol 'rtl8723bu_handle_bt_inquiry' was not declared. Should it be static? sparse: symbol 'rtl8723bu_handle_bt_info' was not declared. Should it be static? Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-24rtl8xxxu: remove set but not used variable 'rate_mask'YueHaibing
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:4484:6: warning: variable rate_mask set but not used [-Wunused-but-set-variable] It is never used since commit a9bb0b515778 ("rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driver") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-22rtl8xxxu: fix RTL8723BU connection failure issue after warm rebootChris Chiu
The RTL8723BU has problems connecting to AP after each warm reboot. Sometimes it returns no scan result, and in most cases, it fails the authentication for unknown reason. However, it works totally fine after cold reboot. Compare the value of register SYS_CR and SYS_CLK_MAC_CLK_ENABLE for cold reboot and warm reboot, the registers imply that the MAC is already powered and thus some procedures are skipped during driver initialization. Double checked the vendor driver, it reads the SYS_CR and SYS_CLK_MAC_CLK_ENABLE also but doesn't skip any during initialization based on them. This commit only tells the RTL8723BU to do full initialization without checking MAC status. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-09rtl8xxxu: make arrays static, makes object smallerColin Ian King
Don't populate const arrays on the stack but instead make them static. Makes the object code smaller by 60 bytes. Before: text data bss dec hex filename 15133 8768 0 23901 5d5d realtek/rtl8xxxu/rtl8xxxu_8192e.o 15209 6392 0 21601 5461 realtek/rtl8xxxu/rtl8xxxu_8723b.o 103254 31202 576 135032 20f78 realtek/rtl8xxxu/rtl8xxxu_core.o After: text data bss dec hex filename 14861 9024 0 23885 5d4d realtek/rtl8xxxu/rtl8xxxu_8192e.o 14953 6616 0 21569 5441 realtek/rtl8xxxu/rtl8xxxu_8723b.o 102986 31458 576 135020 20f6c realtek/rtl8xxxu/rtl8xxxu_core.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-09rtl8xxxu: add bluetooth co-existence support for single antennaChris Chiu
The RTL8723BU suffers the wifi disconnection problem while bluetooth device connected. While wifi is doing tx/rx, the bluetooth will scan without results. This is due to the wifi and bluetooth share the same single antenna for RF communication and they need to have a mechanism to collaborate. BT information is provided via the packet sent from co-processor to host (C2H). It contains the status of BT but the rtl8723bu_handle_c2h dose not really handle it. And there's no bluetooth coexistence mechanism to deal with it. This commit adds a workqueue to set the tdma configurations and coefficient table per the parsed bluetooth link status and given wifi connection state. The tdma/coef table comes from the vendor driver code of the RTL8192EU and RTL8723BU. However, this commit is only for single antenna scenario which RTL8192EU is default dual antenna. The rtl8xxxu_parse_rxdesc24 which invokes the handle_c2h is only for 8723b and 8192e so the mechanism is expected to work on both chips with single antenna. Note RTL8192EU dual antenna is not supported. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-09rtl8xxxu: Improve TX performance of RTL8723BU on rtl8xxxu driverChris Chiu
We have 3 laptops which connect the wifi by the same RTL8723BU. The PCI VID/PID of the wifi chip is 10EC:B720 which is supported. They have the same problem with the in-kernel rtl8xxxu driver, the iperf (as a client to an ethernet-connected server) gets ~1Mbps. Nevertheless, the signal strength is reported as around -40dBm, which is quite good. From the wireshark capture, the tx rate for each data and qos data packet is only 1Mbps. Compare to the Realtek driver at https://github.com/lwfinger/rtl8723bu, the same iperf test gets ~12Mbps or better. The signal strength is reported similarly around -40dBm. That's why we want to improve. After reading the source code of the rtl8xxxu driver and Realtek's, the major difference is that Realtek's driver has a watchdog which will keep monitoring the signal quality and updating the rate mask just like the rtl8xxxu_gen2_update_rate_mask() does if signal quality changes. And this kind of watchdog also exists in rtlwifi driver of some specific chips, ex rtl8192ee, rtl8188ee, rtl8723ae, rtl8821ae...etc. They have the same member function named dm_watchdog and will invoke the corresponding dm_refresh_rate_adaptive_mask to adjust the tx rate mask. With this commit, the tx rate of each data and qos data packet will be 39Mbps (MCS4) with the 0xF00000 as the tx rate mask. The 20th bit to 23th bit means MCS4 to MCS7. It means that the firmware still picks the lowest rate from the rate mask and explains why the tx rate of data and qos data is always lowest 1Mbps because the default rate mask passed is always 0xFFFFFFF ranges from the basic CCK rate, OFDM rate, and MCS rate. However, with Realtek's driver, the tx rate observed from wireshark under the same condition is almost 65Mbps or 72Mbps, which indicating that rtl8xxxu could still be further improved. Signed-off-by: Chris Chiu <chiu@endlessm.com> Reviewed-by: Daniel Drake <drake@endlessm.com> Acked-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-02rtl8xxxu: prevent leaking urbNavid Emamdoost
In rtl8xxxu_submit_int_urb if usb_submit_urb fails the allocated urb should be released. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Reviewed-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-07-24rtl8xxxu: Fix wifi low signal strength issue of RTL8723BUChris Chiu
The WiFi tx power of RTL8723BU is extremely low after booting. So the WiFi scan gives very limited AP list and it always fails to connect to the selected AP. This module only supports 1x1 antenna and the antenna is switched to bluetooth due to some incorrect register settings. Compare with the vendor driver https://github.com/lwfinger/rtl8723bu, we realized that the 8723bu's enable_rf() does the same thing as rtw_btcoex_HAL_Initialize() in vendor driver. And it by default sets the antenna path to BTC_ANT_PATH_BT which we verified it's the cause of the wifi weak tx power. The vendor driver will set the antenna path to BTC_ANT_PATH_PTA in the consequent btcoexist mechanism, by the function halbtc8723b1ant_PsTdma. This commit hand over the antenna control to PTA(Packet Traffic Arbitration), which compares the weight of bluetooth/wifi traffic then determine whether to continue current wifi traffic or not. After PTA take control, The wifi signal will be back to normal and the bluetooth scan can also work at the same time. However, the btcoexist still needs to be handled under different circumstances. If there's a BT connection established, the wifi still fails to connect until BT disconnected. Signed-off-by: Chris Chiu <chiu@endlessm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 295Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 64 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-06rtl8xxxu: Fix missing break in switchGustavo A. R. Silva
Add missing break statement in order to prevent the code from falling through to the default case. Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-11-06rtl8xxxu: Mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1357355 ("Missing break in switch") Addresses-Coverity-ID: 1357378 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-10-13rtl8xxxu: Remove set but not used variables 'usedesc40' and 'seq_number'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c: In function 'rtl8xxxu_tx': drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:4925:7: warning: variable 'usedesc40' set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c:4921:6: warning: variable 'seq_number' set but not used [-Wunused-but-set-variable] 'usedesc40' and 'seq_number' are not used any more after commit b59415c2dd08 ("rtl8xxxu: Split filling of TX descriptors into separate functions") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-09-04rtl8xxxu: Add rtl8188ctv supportAleksei Mamlin
The Realtek rtl8188ctv (0x0bda:0x018a) is a highly integrated single-chip WLAN USB2.0 network interface controller. Currently rtl8188ctv is supported by rtlwifi driver. It is similar to the rtl8188cus(0x0bda:0x818a) and uses the same config. Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-05-30drivers/net: Fix various unnecessary characters after logging newlinesJoe Perches
Remove and coalesce formats when there is an unnecessary character after a logging newline. These extra characters cause logging defects. Miscellanea: o Coalesce formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27treewide: Fix typos in printkMasanari Iida
This patch fixes spelling typos found in printk. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-01-24rtl8xxxu: Fix trailing semicolonLuis de Bethencourt
The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Acked-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-09-25rtl8xxxu: Don't printk raw binary if serial number is not burned in.Adam Borowski
I assume that a blank efuse comes with all ones, thus I did not bother recognizing other possible junk values. This matches 100% of dongles I've seen (a single Gembird 8192eu). Signed-off-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10rtl8xxxu: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-28mac80211: separate encoding/bandwidth from flagsJohannes Berg
We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: clean up rate encoding bits in RX statusJohannes Berg
In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06wireless: Set NL80211_EXT_FEATURE_CQM_RSSI_LIST in multiple driversAndrew Zaborowski
Set the NL80211_EXT_FEATURE_CQM_RSSI_LIST wiphy extended feature wholesale in all mac80211-based drivers that do not set the IEEE80211_VIF_BEACON_FILTER flags on their interfaces. mac80211 will be processing supplied RSSI values in ieee80211_rx_mgmt_beacon and will detect when the thresholds set by ieee80211_set_cqm_rssi_range_config are crossed. Remaining (few) drivers need code to enable the firmware to monitor the thresholds. This is mostly only compile-tested. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-01-20rtl8xxxu: Update author/maintainer contact infoJes Sorensen
Update copyright year and email address. Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-20rtl8xxxu: Add additional USB IDs for rtl8192eu devicesAxel Köllhofer
These IDs originate from the vendor driver Signed-off-by: Axel Köllhofer <AxelKoellhofer@web.de> Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-20rtl8xxxu: Add USB ID for D-Link DWA-131 rev E1 (rtl8192eu)Axel Köllhofer
This was tested by David Patiño. Reported-by: David Patiño <davidpatino82@gmail.com> Signed-off-by: Axel Köllhofer <AxelKoellhofer@web.de> Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-20rtl8xxxu: Add another 8192eu device to the USB listJes Sorensen
TP-Link TL-WN822N v4 (2357:0108) Reported-by: Gregory Auzanneau <linux@reolight.net> Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-01-20rtl8xxxu: Mark 8192eu device 0x0bda:0x818b as testedJes Sorensen
Device reported as working fine, so tell the driver not to warn about it being untested. Reported-by: Aex Aey <aexaey@gmail.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-12-01rtl8xxxu: Work around issue with 8192eu and 8723bu devices not reconnectingJes Sorensen
The H2C MEDIA_STATUS_RPT command for some reason causes 8192eu and 8723bu devices not being able to reconnect. Reported-by: Barry Day <briselec@gmail.com> Cc: <stable@vger.kernel.org> #4.8+ Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-28rtl8xxxu: tx rate reported before setBarry Day
Move the dev_info call that attempts to show the rate used before it is set. Signed-off-by: Barry Day <briselec@gmail.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Barry Day <briselec@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-25rtl8xxxu: Fix non static symbol warningWei Yongjun
Fixes the following sparse warning: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c:1559:6: warning: symbol 'rtl8192eu_power_off' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-25rtl8xxxu: Pass tx_info to fill_txdesc in order to have access to retry countJes Sorensen
In order to obtain retry count for a given rate we need to pass the full struct ieee80211_tx_info to the function setting the rate in he TX descriptor. This uncovered a huge bug where the old code would use struct ieee80211_rate.flags to test for rate parameters, which is always zero, instead of the flags value from struct ieee80211_tx_rate. Time to find a brown paper bag :( Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-25rtl8xxxu: Obtain RTS rates from mac80211Jes Sorensen
Use the mac80211 provided rate for RTS rather than the hard coded 24Mbps as suggested by the vendor drivers. Reported-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-25rtl8xxxu: Fix rtl8192eu driver reload issueJes Sorensen
The 8192eu suffered from two issues when reloading the driver. The same problems as with the 8723bu where REG_RX_WAIT_CCA bits 22 and 23 didn't get set in rtl8192e_enable_rf(). In addition it also seems prone to issues when setting REG_RF_CTRL to 0 intead of just disabling the RF_ENABLE bit. Similar to what was causing issues with the 8188eu. With this patch I can successfully reload the driver and reassociate to an APi with an 8192eu dongle. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-25rtl8xxxu: Fix rtl8723bu driver reload issueJes Sorensen
The generic disable_rf() function clears bits 22 and 23 in REG_RX_WAIT_CCA, however we did not re-enable them again in rtl8723b_enable_rf() This resolves the problem for me with 8723bu devices not working again after reloading the driver. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-25rtl8xxxu: Fix big-endian problem reporting mactimeJes Sorensen
The full RX descriptor is converted so converting tsfl again would return it to it's original endian value. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-11-25rtl8xxxu: Fix memory leak in handling rxdesc16 packetsJes Sorensen
A device running without RX package aggregation could return more data in the USB packet than the actual network packet. In this case the could would clone the skb but then determine that that there was no packet to handle and exit without freeing the cloned skb first. This has so far only been observed with 8188eu devices, but could affect others. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26rtl8xxxu: Stop log spam from each successful interruptLarry Finger
As soon as debugging is turned on, the logs are filled with messages reporting the interrupt status. As this quantity is usually zero, this output is not needed. In fact, there will be a report if the status is not zero, thus the debug line in question could probably be deleted. Rather than taking that action, I have changed it to only be printed when the newly added RTL8XXXU_DEBUG_INTERRUPT bit is set in the debug mask. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-09-26rtl8xxxu: Use a struct rtl8xxxu_fileops * in rtl8xxxu_init_device()Jes Sorensen
This saves some 217, or about, derefences of priv->fops. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 04:47:18 +0000