summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mediatek/mt7601u
AgeCommit message (Collapse)Author
2021-04-11mt7601u: enable TDLS supportLorenzo Bianconi
Notify mac80211 the mt7601u chipset support 802.11 TDLS. The feature has been tested with a mt7610u peer. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/8f9fd662cdbbb70ba896f1bea80e696b15011d3f.1614536496.git.lorenzo@kernel.org
2021-04-11mt7601u: fix always true expressionColin Ian King
Currently the expression ~nic_conf1 is always true because nic_conf1 is a u16 and according to 6.5.3.3 of the C standard the ~ operator promotes the u16 to an integer before flipping all the bits. Thus the top 16 bits of the integer result are all set so the expression is always true. If the intention was to flip all the bits of nic_conf1 then casting the integer result back to a u16 is a suitabel fix. Interestingly static analyzers seem to thing a bitwise ! should be used instead of ~ for this scenario, so I think the original intent of the expression may need some extra consideration. Addresses-Coverity: ("Logical vs. bitwise operator") Fixes: c869f77d6abb ("add mt7601u driver") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210225183241.1002129-1-colin.king@canonical.com
2021-02-06Merge tag 'wireless-drivers-next-2021-02-05' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.12 First set of patches for v5.12. A smaller pull request this time, biggest feature being a better key handling for ath9k. And of course the usual fixes and cleanups all over. Major changes: ath9k * more robust encryption key cache management brcmfmac * support BCM4365E with 43666 ChipCommon chip ID * tag 'wireless-drivers-next-2021-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (35 commits) iwl4965: do not process non-QOS frames on txq->sched_retry path mt7601u: process tx URBs with status EPROTO properly wlcore: Fix command execute failure 19 for wl12xx mt7601u: use ieee80211_rx_list to pass frames to the network stack as a batch rtw88: 8723de: adjust the LTR setting rtlwifi: rtl8821ae: fix bool comparison in expressions rtlwifi: rtl8192se: fix bool comparison in expressions rtlwifi: rtl8188ee: fix bool comparison in expressions rtlwifi: rtl8192c-common: fix bool comparison in expressions rtlwifi: rtl_pci: fix bool comparison in expressions wlcore: Downgrade exceeded max RX BA sessions to debug wilc1000: use flexible-array member instead of zero-length array brcmfmac: clear EAP/association status bits on linkdown events brcmfmac: Delete useless kfree code qtnfmac_pcie: Use module_pci_driver mt7601u: check the status of device in calibration mt7601u: process URBs in status EPROTO properly brcmfmac: support BCM4365E with 43666 ChipCommon chip ID wilc1000: fix spelling mistake in Kconfig "devision" -> "division" mwifiex: pcie: Drop bogus __refdata annotation ... ==================== Link: https://lore.kernel.org/r/20210205161901.C7F83C433ED@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-25mt7601u: process tx URBs with status EPROTO properlyLorenzo Bianconi
Similar to commit 0e40dbd56d67 ("mt7601u: process URBs in status EPROTO properly"), do not process tx URBs if marked with status set to EPROTO. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/72392e8341aa8591c0b9962661a6ca26b1198f32.1610919534.git.lorenzo@kernel.org
2021-01-25mt7601u: use ieee80211_rx_list to pass frames to the network stack as a batchLorenzo Bianconi
Similar to mt76 driver, rely on ieee80211_rx_list in order to improve icache footprint Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/5c72fa2dda45c1ae3f285af80c02f3db23341d85.1610580222.git.lorenzo@kernel.org
2021-01-25mt7601u: fix kernel crash unplugging the deviceLorenzo Bianconi
The following crash log can occur unplugging the usb dongle since, after the urb poison in mt7601u_free_tx_queue(), usb_submit_urb() will always fail resulting in a skb kfree while the skb has been already queued. Fix the issue enqueuing the skb only if usb_submit_urb() succeed. Hardware name: Hewlett-Packard 500-539ng/2B2C, BIOS 80.06 04/01/2015 Workqueue: usb_hub_wq hub_event RIP: 0010:skb_trim+0x2c/0x30 RSP: 0000:ffffb4c88005bba8 EFLAGS: 00010206 RAX: 000000004ad483ee RBX: ffff9a236625dee0 RCX: 000000000000662f RDX: 000000000000000c RSI: 0000000000000000 RDI: ffff9a2343179300 RBP: ffff9a2343179300 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9a23748f7840 R11: 0000000000000001 R12: ffff9a236625e4d4 R13: ffff9a236625dee0 R14: 0000000000001080 R15: 0000000000000008 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd410a34ef8 CR3: 00000001416ee001 CR4: 00000000001706f0 Call Trace: mt7601u_tx_status+0x3e/0xa0 [mt7601u] mt7601u_dma_cleanup+0xca/0x110 [mt7601u] mt7601u_cleanup+0x22/0x30 [mt7601u] mt7601u_disconnect+0x22/0x60 [mt7601u] usb_unbind_interface+0x8a/0x270 ? kernfs_find_ns+0x35/0xd0 __device_release_driver+0x17a/0x230 device_release_driver+0x24/0x30 bus_remove_device+0xdb/0x140 device_del+0x18b/0x430 ? kobject_put+0x98/0x1d0 usb_disable_device+0xc6/0x1f0 usb_disconnect.cold+0x7e/0x20a hub_event+0xbf3/0x1870 process_one_work+0x1b6/0x350 worker_thread+0x53/0x3e0 ? process_one_work+0x350/0x350 kthread+0x11b/0x140 ? __kthread_bind_mask+0x60/0x60 ret_from_fork+0x22/0x30 Fixes: 23377c200b2eb ("mt7601u: fix possible memory leak when the device is disconnected") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/3b85219f669a63a8ced1f43686de05915a580489.1610919247.git.lorenzo@kernel.org
2021-01-18mt7601u: fix rx buffer refcountingLorenzo Bianconi
Fix the following crash due to erroneous page refcounting: [ 32.445919] BUG: Bad page state in process swapper/1 pfn:11f65a [ 32.447409] page:00000000938f0632 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 pfn:0x11f65a [ 32.449605] flags: 0x8000000000000000() [ 32.450421] raw: 8000000000000000 ffffffff825b0148 ffffea00045ae988 0000000000000000 [ 32.451795] raw: 0000000000000000 0000000000000001 00000000ffffff7f 0000000000000000 [ 32.452999] page dumped because: nonzero mapcount [ 32.453888] Modules linked in: [ 32.454492] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.11.0-rc2+ #1976 [ 32.455695] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-1.fc33 04/01/2014 [ 32.457157] Call Trace: [ 32.457636] <IRQ> [ 32.457993] dump_stack+0x77/0x97 [ 32.458576] bad_page.cold+0x65/0x96 [ 32.459198] get_page_from_freelist+0x46a/0x11f0 [ 32.460008] __alloc_pages_nodemask+0x10a/0x2b0 [ 32.460794] mt7601u_rx_tasklet+0x651/0x720 [ 32.461505] tasklet_action_common.constprop.0+0x6b/0xd0 [ 32.462343] __do_softirq+0x152/0x46c [ 32.462928] asm_call_irq_on_stack+0x12/0x20 [ 32.463610] </IRQ> [ 32.463953] do_softirq_own_stack+0x5b/0x70 [ 32.464582] irq_exit_rcu+0x9f/0xe0 [ 32.465028] common_interrupt+0xae/0x1a0 [ 32.465536] asm_common_interrupt+0x1e/0x40 [ 32.466071] RIP: 0010:default_idle+0x18/0x20 [ 32.468981] RSP: 0018:ffffc90000077f00 EFLAGS: 00000246 [ 32.469648] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 [ 32.470550] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff81aac3dd [ 32.471463] RBP: ffff88810022ab00 R08: 0000000000000001 R09: 0000000000000001 [ 32.472335] R10: 0000000000000046 R11: 0000000000005aa0 R12: 0000000000000000 [ 32.473235] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 32.474139] ? default_idle_call+0x4d/0x200 [ 32.474681] default_idle_call+0x74/0x200 [ 32.475192] do_idle+0x1d5/0x250 [ 32.475612] cpu_startup_entry+0x19/0x20 [ 32.476114] secondary_startup_64_no_verify+0xb0/0xbb [ 32.476765] Disabling lock debugging due to kernel taint Fixes: c869f77d6abb ("add mt7601u driver") Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/62b2380c8c2091834cfad05e1059b55f945bd114.1610643952.git.lorenzo@kernel.org
2021-01-14mt7601u: check the status of device in calibrationZhi Han
When the usb device being plugged out, before ieee80211 gets to know the hw being removed, it gets to know that the association status changed, and thus ask for the device to do the calibration. This causes error as the hw is absent. This can be avoid by checking the status of the device before sending the calibration request to the device. Signed-off-by: Zhi Han <z.han@gmx.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201217161657.GB12562@E480
2021-01-14mt7601u: process URBs in status EPROTO properlyZhi Han
When the usb device being plugged out, before the usb_driver:disconnect called by e.g workqueue, it is possible that some URBs are still in processing, and being marked as EPROTO in host controller. Those URBs should not be scheduled in complete_rx callback function to get further processing. Signed-off-by: Zhi Han <z.han@gmx.net> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201217161302.GA12562@E480
2020-11-07wireless: mt7601u: convert tasklets to use new tasklet_setup() APIAllen Pais
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <apais@linux.microsoft.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201007103309.363737-3-allen.lkml@gmail.com
2020-09-22mt7601u: Convert to DEFINE_SHOW_ATTRIBUTEQinglang Miao
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200919024838.14172-1-miaoqinglang@huawei.com
2020-09-07mt7601u: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200901173603.GA2701@embeddedor
2020-09-01mt7601u: phy: Fix misnaming when documented function parameter 'dac'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/mediatek/mt7601u/phy.c:1216: warning: Function parameter or member 'dac' not described in 'mt7601u_set_tx_dac' drivers/net/wireless/mediatek/mt7601u/phy.c:1216: warning: Excess function parameter 'path' description in 'mt7601u_set_tx_dac' Cc: Jakub Kicinski <kubakici@wp.pl> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Felix Fietkau <nbd@openwrt.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819072402.3085022-16-lee.jones@linaro.org
2020-08-02mt7601u: add missing release on skb in mt7601u_mcu_msg_sendNavid Emamdoost
In the implementation of mt7601u_mcu_msg_send(), skb is supposed to be consumed on all execution paths. Release skb before returning if test_bit() fails. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200718052630.11032-1-navid.emamdoost@gmail.com
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-11-05Merge tag 'wireless-drivers-next-2019-11-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.5 First set of patches for 5.5. The most active driver here clearly is rtw88, lots of patches for it. More quiet on other drivers, smaller fixes and cleanups all over. This pull request also has a trivial conflict, the report and example resolution here: https://lkml.kernel.org/r/20191031111242.50ab1eca@canb.auug.org.au Major changes: rtw88 * add deep power save support * add mac80211 software tx queue (wake_tx_queue) support * enable hardware rate control * add TX-AMSDU support * add NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 support * add power tracking support * add 802.11ac beamformee support * add set_bitrate_mask support * add phy_info debugfs to show Tx/Rx physical status * add RFE type 3 support for 8822b ath10k * add support for hardware rfkill on devices where firmware supports it rtl8xxxu * add bluetooth co-existence support for single antenna iwlwifi * Revamp the debugging infrastructure ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mt7601u: use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs fopszhong jiang
It is more clear to use DEFINE_DEBUGFS_ATTRIBUTE to define debugfs file operation rather than DEFINE_SIMPLE_ATTRIBUTE. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-04mac80211: simplify TX aggregation startJohannes Berg
There really is no need to make drivers call the ieee80211_start_tx_ba_cb_irqsafe() function and then schedule the worker if all we want is to set a bit. Add a new return value (that was previously considered invalid) to indicate that the driver is immediately ready for the session, and make drivers use it. The only drivers that remain different are the Intel ones as they need to negotiate more with the firmware. Link: https://lore.kernel.org/r/1570007543-I152912660131cbab2e5d80b4218238c20f8a06e5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-01mt7601u: fix bbp version check in mt7601u_wait_bbp_readyLorenzo Bianconi
Fix bbp ready check in mt7601u_wait_bbp_ready. The issue is reported by coverity with the following error: Logical vs. bitwise operator The expression's value does not depend on the operands; inadvertent use of the wrong operator is a likely logic error. Addresses-Coverity-ID: 1309441 ("Logical vs. bitwise operator") Fixes: c869f77d6abb ("add mt7601u driver") Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-06mt7601u: null check the allocationNavid Emamdoost
devm_kzalloc may fail and return NULL. So the null check is needed. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-07-24mt7601u: use params->ssn value directlyStanislaw Gruszka
There is no point to use pointer to params->ssn. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-26Merge tag 'wireless-drivers-next-for-davem-2019-06-26' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valu says: ==================== wireless-drivers-next patches for 5.3 First set of patches for 5.3, but not that many patches this time. This pull request fails to compile with the tip tree due to ktime_get_boot_ns() API changes there. It should be easy for Linus to fix it in p54 driver once he pulls this, an example resolution here: https://lkml.kernel.org/r/20190625160432.533aa140@canb.auug.org.au Major changes: airo * switch to use skcipher interface p54 * support boottime in scan results rtw88 * add fast xmit support * add random mac address on scan support rt2x00 * add software watchdog to detect hangs, it's disabled by default ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-25mt7601u: fix possible memory leak when the device is disconnectedLorenzo Bianconi
When the device is disconnected while passing traffic it is possible to receive out of order urbs causing a memory leak since the skb linked to the current tx urb is not removed. Fix the issue deallocating the skb cleaning up the tx ring. Moreover this patch fixes the following kernel warning [ 57.480771] usb 1-1: USB disconnect, device number 2 [ 57.483451] ------------[ cut here ]------------ [ 57.483462] TX urb mismatch [ 57.483481] WARNING: CPU: 1 PID: 32 at drivers/net/wireless/mediatek/mt7601u/dma.c:245 mt7601u_complete_tx+0x165/00 [ 57.483483] Modules linked in: [ 57.483496] CPU: 1 PID: 32 Comm: kworker/1:1 Not tainted 5.2.0-rc1+ #72 [ 57.483498] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.12.0-2.fc30 04/01/2014 [ 57.483502] Workqueue: usb_hub_wq hub_event [ 57.483507] RIP: 0010:mt7601u_complete_tx+0x165/0x1e0 [ 57.483510] Code: 8b b5 10 04 00 00 8b 8d 14 04 00 00 eb 8b 80 3d b1 cb e1 00 00 75 9e 48 c7 c7 a4 ea 05 82 c6 05 f [ 57.483513] RSP: 0000:ffffc900000a0d28 EFLAGS: 00010092 [ 57.483516] RAX: 000000000000000f RBX: ffff88802c0a62c0 RCX: ffffc900000a0c2c [ 57.483518] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff810a8371 [ 57.483520] RBP: ffff88803ced6858 R08: 0000000000000000 R09: 0000000000000001 [ 57.483540] R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000046 [ 57.483542] R13: ffff88802c0a6c88 R14: ffff88803baab540 R15: ffff88803a0cc078 [ 57.483548] FS: 0000000000000000(0000) GS:ffff88803eb00000(0000) knlGS:0000000000000000 [ 57.483550] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 57.483552] CR2: 000055e7f6780100 CR3: 0000000028c86000 CR4: 00000000000006a0 [ 57.483554] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 57.483556] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 57.483559] Call Trace: [ 57.483561] <IRQ> [ 57.483565] __usb_hcd_giveback_urb+0x77/0xe0 [ 57.483570] xhci_giveback_urb_in_irq.isra.0+0x8b/0x140 [ 57.483574] handle_cmd_completion+0xf5b/0x12c0 [ 57.483577] xhci_irq+0x1f6/0x1810 [ 57.483581] ? lockdep_hardirqs_on+0x9e/0x180 [ 57.483584] ? _raw_spin_unlock_irq+0x24/0x30 [ 57.483588] __handle_irq_event_percpu+0x3a/0x260 [ 57.483592] handle_irq_event_percpu+0x1c/0x60 [ 57.483595] handle_irq_event+0x2f/0x4c [ 57.483599] handle_edge_irq+0x7e/0x1a0 [ 57.483603] handle_irq+0x17/0x20 [ 57.483607] do_IRQ+0x54/0x110 [ 57.483610] common_interrupt+0xf/0xf [ 57.483612] </IRQ> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25mt7601u: do not schedule rx_tasklet when the device has been disconnectedLorenzo Bianconi
Do not schedule rx_tasklet when the usb dongle is disconnected. Moreover do not grub rx_lock in mt7601u_kill_rx since usb_poison_urb can run concurrently with urb completion and we can unlink urbs from rx ring in any order. This patch fixes the common kernel warning reported when the device is removed. [ 24.921354] usb 3-14: USB disconnect, device number 7 [ 24.921593] ------------[ cut here ]------------ [ 24.921594] RX urb mismatch [ 24.921675] WARNING: CPU: 4 PID: 163 at drivers/net/wireless/mediatek/mt7601u/dma.c:200 mt7601u_complete_rx+0xcb/0xd0 [mt7601u] [ 24.921769] CPU: 4 PID: 163 Comm: kworker/4:2 Tainted: G OE 4.19.31-041931-generic #201903231635 [ 24.921770] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Extreme4, BIOS P1.30 05/23/2014 [ 24.921782] Workqueue: usb_hub_wq hub_event [ 24.921797] RIP: 0010:mt7601u_complete_rx+0xcb/0xd0 [mt7601u] [ 24.921800] RSP: 0018:ffff9bd9cfd03d08 EFLAGS: 00010086 [ 24.921802] RAX: 0000000000000000 RBX: ffff9bd9bf043540 RCX: 0000000000000006 [ 24.921803] RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff9bd9cfd16420 [ 24.921804] RBP: ffff9bd9cfd03d28 R08: 0000000000000002 R09: 00000000000003a8 [ 24.921805] R10: 0000002f485fca34 R11: 0000000000000000 R12: ffff9bd9bf043c1c [ 24.921806] R13: ffff9bd9c62fa3c0 R14: 0000000000000082 R15: 0000000000000000 [ 24.921807] FS: 0000000000000000(0000) GS:ffff9bd9cfd00000(0000) knlGS:0000000000000000 [ 24.921808] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.921808] CR2: 00007fb2648b0000 CR3: 0000000142c0a004 CR4: 00000000001606e0 [ 24.921809] Call Trace: [ 24.921812] <IRQ> [ 24.921819] __usb_hcd_giveback_urb+0x8b/0x140 [ 24.921821] usb_hcd_giveback_urb+0xca/0xe0 [ 24.921828] xhci_giveback_urb_in_irq.isra.42+0x82/0xf0 [ 24.921834] handle_cmd_completion+0xe02/0x10d0 [ 24.921837] xhci_irq+0x274/0x4a0 [ 24.921838] xhci_msi_irq+0x11/0x20 [ 24.921851] __handle_irq_event_percpu+0x44/0x190 [ 24.921856] handle_irq_event_percpu+0x32/0x80 [ 24.921861] handle_irq_event+0x3b/0x5a [ 24.921867] handle_edge_irq+0x80/0x190 [ 24.921874] handle_irq+0x20/0x30 [ 24.921889] do_IRQ+0x4e/0xe0 [ 24.921891] common_interrupt+0xf/0xf [ 24.921892] </IRQ> [ 24.921900] RIP: 0010:usb_hcd_flush_endpoint+0x78/0x180 [ 24.921354] usb 3-14: USB disconnect, device number 7 Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19mt7601u: check chip version on probeStanislaw Gruszka
Since some USB device IDs are duplicated between mt7601u and mt76x0u devices, check chip version on probe and return error if not match 0x7601. Don't think this is serious issue, probe most likely will fail at some other point for wrong device, but we do not have to configure it if we know is not mt7601u device. Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01mt7601u: do not use WARN_ON in the datapathLorenzo Bianconi
Substitute WARN_ON with WARN_ON_ONCE in mt7601u_rx_next_seg_len routine Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-01mt7601u: bump supported EEPROM versionStanislaw Gruszka
As reported by Michael eeprom 0d is supported and work with the driver. Dump of /sys/kernel/debug/ieee80211/phy1/mt7601u/eeprom_param with 0d EEPORM looks like this: RSSI offset: 0 0 Reference temp: f9 LNA gain: 8 Reg channels: 1-14 Per rate power: raw:05 bw20:05 bw40:05 raw:05 bw20:05 bw40:05 raw:03 bw20:03 bw40:03 raw:03 bw20:03 bw40:03 raw:04 bw20:04 bw40:04 raw:00 bw20:00 bw40:00 raw:00 bw20:00 bw40:00 raw:00 bw20:00 bw40:00 raw:02 bw20:02 bw40:02 raw:00 bw20:00 bw40:00 Per channel power: tx_power ch1:09 ch2:09 tx_power ch3:0a ch4:0a tx_power ch5:0a ch6:0a tx_power ch7:0b ch8:0b tx_power ch9:0b ch10:0b tx_power ch11:0b ch12:0b tx_power ch13:0b ch14:0b Reported-and-tested-by: Michael <ZeroBeat@gmx.de> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-30mt7601u: expose 802.11w supportDavide Caratti
Set MFP_CAPABLE bit in hw flag capabilities exported by the driver Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-07-30mt7601u: use sw encryption for hw unsupported ciphersLorenzo Bianconi
Fall back to software encryption for hw unsupported ciphers in order to enable 802.11w Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-06-24mt7601u: remove warning when avg_rssi is zeroStanislaw Gruszka
It turned out that we can run calibration without already received frames with RSSI data. In such case just don't update AGC register and don't print the warning. Fixes: b305a6ab0247 ("mt7601u: use EWMA to calculate avg_rssi") Reported-by: Adam Borowski <kilobyte@angband.pl> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24mt7601u: run calibration works after finishing scanningStanislaw Gruszka
When finishing scanning we switch to operational channel sill with SCANNING flag. This mean that we never perform calibration works after scanning. To fix the problem queue calibration works on .sw_scan_complete() routine. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24mt7601u: use EWMA to calculate avg_rssiStanislaw Gruszka
avr_rssi is not calculated correctly as we do not divide result by 256 (mt76 sum avg_rssi1 and avg_rssi2 and divide by 512). However dividing by 256 will make avg_rssi almost the same as last rssi value - not really an average. So use EWMA to calculate avg_rssi. I've chosen weight_rcp=4 to convergence quicker on signal strength changes. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-24mt7601u: phy: mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-04Merge tag 'driver-core-4.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core patches for 4.17-rc1. There's really not much here, just a bunch of firmware code refactoring from Luis as he attempts to wrangle that codebase into something that is managable, along with a bunch of userspace tests for it. Other than that, a handful of small bugfixes and reverts of things that didn't work out. Full details are in the shortlog, it's not all that much. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits) drivers: base: remove check for callback in coredump_store() mt7601u: use firmware_request_cache() to address cache on reboot firmware: add firmware_request_cache() to help with cache on reboot firmware: fix typo on pr_info_once() when ignore_sysfs_fallback is used firmware: explicitly include vmalloc.h firmware: ensure the firmware cache is not used on incompatible calls test_firmware: modify custom fallback tests to use unique files firmware: add helper to check to see if fw cache is setup firmware: fix checking for return values for fw_add_devm_name() rename: _request_firmware_load() fw_load_sysfs_fallback() test_firmware: test three firmware kernel configs using a proc knob test_firmware: expand on library with shared helpers firmware: enable to force disable the fallback mechanism at run time firmware: enable run time change of forcing fallback loader firmware: move firmware loader into its own directory firmware: split firmware fallback functionality into its own file firmware: move loading timeout under struct firmware_fallback_config firmware: use helpers for setting up a temporary cache timeout firmware: simplify CONFIG_FW_LOADER_USER_HELPER_FALLBACK further drivers: base: add description for .coredump() callback ...
2018-03-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-03-31 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add raw BPF tracepoint API in order to have a BPF program type that can access kernel internal arguments of the tracepoints in their raw form similar to kprobes based BPF programs. This infrastructure also adds a new BPF_RAW_TRACEPOINT_OPEN command to BPF syscall which returns an anon-inode backed fd for the tracepoint object that allows for automatic detach of the BPF program resp. unregistering of the tracepoint probe on fd release, from Alexei. 2) Add new BPF cgroup hooks at bind() and connect() entry in order to allow BPF programs to reject, inspect or modify user space passed struct sockaddr, and as well a hook at post bind time once the port has been allocated. They are used in FB's container management engine for implementing policy, replacing fragile LD_PRELOAD wrapper intercepting bind() and connect() calls that only works in limited scenarios like glibc based apps but not for other runtimes in containerized applications, from Andrey. 3) BPF_F_INGRESS flag support has been added to sockmap programs for their redirect helper call bringing it in line with cls_bpf based programs. Support is added for both variants of sockmap programs, meaning for tx ULP hooks as well as recv skb hooks, from John. 4) Various improvements on BPF side for the nfp driver, besides others this work adds BPF map update and delete helper call support from the datapath, JITing of 32 and 64 bit XADD instructions as well as offload support of bpf_get_prandom_u32() call. Initial implementation of nfp packet cache has been tackled that optimizes memory access (see merge commit for further details), from Jakub and Jiong. 5) Removal of struct bpf_verifier_env argument from the print_bpf_insn() API has been done in order to prepare to use print_bpf_insn() soon out of perf tool directly. This makes the print_bpf_insn() API more generic and pushes the env into private data. bpftool is adjusted as well with the print_bpf_insn() argument removal, from Jiri. 6) Couple of cleanups and prep work for the upcoming BTF (BPF Type Format). The latter will reuse the current BPF verifier log as well, thus bpf_verifier_log() is further generalized, from Martin. 7) For bpf_getsockopt() and bpf_setsockopt() helpers, IPv4 IP_TOS read and write support has been added in similar fashion to existing IPv6 IPV6_TCLASS socket option we already have, from Nikita. 8) Fixes in recent sockmap scatterlist API usage, which did not use sg_init_table() for initialization thus triggering a BUG_ON() in scatterlist API when CONFIG_DEBUG_SG was enabled. This adds and uses a small helper sg_init_marker() to properly handle the affected cases, from Prashant. 9) Let the BPF core follow IDR code convention and therefore use the idr_preload() and idr_preload_end() helpers, which would also help idr_alloc_cyclic() under GFP_ATOMIC to better succeed under memory pressure, from Shaohua. 10) Last but not least, a spelling fix in an error message for the BPF cookie UID helper under BPF sample code, from Colin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28net/mediatek: disambiguate mt76 vs mt7601u trace eventsAlexei Starovoitov
two trace events defined with the same name and both unused. They conflict in allyesconfig build. Rename one of them. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-27wireless: Use octal not symbolic permissionsJoe Perches
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-22mt7601u: use firmware_request_cache() to address cache on rebootLuis R. Rodriguez
request_firmware_cache() will ensure the firmware is available on resume from suspend if on reboot the device retains the firmware. This optimization is in place given otherwise on reboot we have to reload the firmware, the opmization saves us about max 1s, minimum 10ms. Cantabile has reported back this fixes his woes with both suspend and hibernation. Reported-by: Cantabile <cantabile.desu@gmail.com> Tested-by: Cantabile <cantabile.desu@gmail.com> Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-13mt7601u: let mac80211 validate rx CCMP PNLorenzo Bianconi
Apparently the hardware does not perform CCMP PN validation so let mac80211 take care of possible replay attacks in sw. Moreover indicate ICV and MIC had been stripped setting corresponding bits in ieee80211_rx_status. The fix has been validated using 4.2.1 and 4.1.3 tests from the WiFi Alliance vulnerability detection tool. Fixes: c869f77d6abb ("add mt7601u driver") Acked-by: Jakub Kicinski <kubakici@wp.pl> Tested-by: David Park <david.park@hitemengineering.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13mt7601u: simplify mt7601u_mcu_msg_alloc signatureLorenzo Bianconi
Remove mt7601u_dev parameter from mt7601u_mcu_msg_alloc signature since dev pointer is never used in routine body Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-13mt7601u: remove a warning in mt7601u_efuse_physical_size_check()Lorenzo Bianconi
Fix the following sparse warning in mt7601u_efuse_physical_size_check: - drivers/net/wireless/mediatek/mt7601u/eeprom.c:77:27: warning: Variable length array is used Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-28mt7601u: make write with mask access atomicLorenzo Bianconi
Introduce __mt7601u_rr and __mt7601u_vendor_single_wr routines in order to make mt7601u_rmw and mt7601u_rmc atomic. This patch does not fix a reported issue but makes the usb access more robust to concurrent operations on the same register since it is theoretically possible that read and write accesses of mt7601u_rmw/mt7601u_rmc can be interleaved with a different write operation on the same register. Moreover using __mt7601u_rr and __mt7601u_vendor_single_wr in mt7601u_rmw/mt7601u_rmc allows to grab vendor_req_mutex mutex once instead of twice Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-28mt7601u: set device mac address in mt7601u_add_interface()Lorenzo Bianconi
If mac80211 adds a vif with a different mac address respect to the eeprom one, the device will not be able to connect to the ap since the hw address has not been updated. Fix the issue updating hw mac address in mt7601u_add_interface routine BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1516935 Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-28mt7601u: move mt7601u_set_macaddr in mac related codeLorenzo Bianconi
Remove static qualifier from mt7601u_set_macaddr routine and move it in mac related code in order to be used to properly support vif with different mac address respect to the default one Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-24mt7601u: check memory allocation failureChristophe Jaillet
Check memory allocation failure and return -ENOMEM in such a case, as already done a few lines below. As 'dev->tx_q' can be NULL, we also need to check for that in 'mt7601u_free_tx()', and return early. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-08-10mt7601u: constify usb_device_idArvind Yadav
usb_device_id are not supposed to change at runtime. All functions working with usb_device_id provided by <linux/usb.h> work with const usb_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-16networking: make skb_push & __skb_push return void pointersJohannes Berg
It seems like a historic accident that these return unsigned char *, and in many places that means casts are required, more often than not. Make these functions return void * and remove all the casts across the tree, adding a (u8 *) cast only where the unsigned char pointer was used directly, all done with the following spatch: @@ expression SKB, LEN; typedef u8; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - *(fn(SKB, LEN)) + *(u8 *)fn(SKB, LEN) @@ expression E, SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; type T; @@ - E = ((T *)(fn(SKB, LEN))) + E = fn(SKB, LEN) @@ expression SKB, LEN; identifier fn = { skb_push, __skb_push, skb_push_rcsum }; @@ - fn(SKB, LEN)[0] + *(u8 *)fn(SKB, LEN) Note that the last part there converts from push(...)[0] to the more idiomatic *(u8 *)push(...). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 14:39:19 +0000