summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/marvell/mwifiex
AgeCommit message (Collapse)Author
2021-07-02Merge tag 'asm-generic-unaligned-5.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm/unaligned.h unification from Arnd Bergmann: "Unify asm/unaligned.h around struct helper The get_unaligned()/put_unaligned() helpers are traditionally architecture specific, with the two main variants being the "access-ok.h" version that assumes unaligned pointer accesses always work on a particular architecture, and the "le-struct.h" version that casts the data to a byte aligned type before dereferencing, for architectures that cannot always do unaligned accesses in hardware. Based on the discussion linked below, it appears that the access-ok version is not realiable on any architecture, but the struct version probably has no downsides. This series changes the code to use the same implementation on all architectures, addressing the few exceptions separately" Link: https://lore.kernel.org/lkml/75d07691-1e4f-741f-9852-38c0b4f520bc@synopsys.com/ Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363 Link: https://lore.kernel.org/lkml/20210507220813.365382-14-arnd@kernel.org/ Link: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git unaligned-rework-v2 Link: https://lore.kernel.org/lkml/CAHk-=whGObOKruA_bU3aPGZfoDqZM1_9wBkwREp0H0FgR-90uQ@mail.gmail.com/ * tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic: simplify asm/unaligned.h asm-generic: uaccess: 1-byte access is always aligned netpoll: avoid put_unaligned() on single character mwifiex: re-fix for unaligned accesses apparmor: use get_unaligned() only for multi-byte words partitions: msdos: fix one-byte get_unaligned() asm-generic: unaligned always use struct helpers asm-generic: unaligned: remove byteshift helpers powerpc: use linux/unaligned/le_struct.h on LE power7 m68k: select CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS sh: remove unaligned access for sh4a openrisc: always use unaligned-struct header asm-generic: use asm-generic/unaligned.h for most architectures
2021-06-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Trivial conflict in net/netfilter/nf_tables_api.c. Duplicate fix in tools/testing/selftests/net/devlink_port_split.py - take the net-next version. skmsg, and L4 bpf - keep the bpf code but remove the flags and err params. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-22mwifiex: Avoid memset() over-write of WEP key_materialKees Cook
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memset(), avoid intentionally writing across neighboring array fields. When preparing to call mwifiex_set_keyparamset_wep(), key_material is treated very differently from its structure layout (which has only a single struct mwifiex_ie_type_key_param_set). Instead, add a new type to the union so memset() can correctly reason about the size of the structure. Note that the union ("params", 196 bytes) containing key_material was not large enough to hold the target of this memset(): sizeof(struct mwifiex_ie_type_key_param_set) == 60, NUM_WEP_KEYS = 4, so 240 bytes, or 44 bytes past the end of "params". The good news is that it appears that the command buffer, as allocated, is 2048 bytes (MWIFIEX_SIZE_OF_CMD_BUFFER), so no neighboring memory appears to be getting clobbered. Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210617171522.3410951-1-keescook@chromium.org
2021-06-11mwifiex: bring down link before deleting interfaceBrian Norris
We can deadlock when rmmod'ing the driver or going through firmware reset, because the cfg80211_unregister_wdev() has to bring down the link for us, ... which then grab the same wiphy lock. nl80211_del_interface() already handles a very similar case, with a nice description: /* * We hold RTNL, so this is safe, without RTNL opencount cannot * reach 0, and thus the rdev cannot be deleted. * * We need to do it for the dev_close(), since that will call * the netdev notifiers, and we need to acquire the mutex there * but don't know if we get there from here or from some other * place (e.g. "ip link set ... down"). */ mutex_unlock(&rdev->wiphy.mtx); ... Do similarly for mwifiex teardown, by ensuring we bring the link down first. Sample deadlock trace: [ 247.103516] INFO: task rmmod:2119 blocked for more than 123 seconds. [ 247.110630] Not tainted 5.12.4 #5 [ 247.115796] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 247.124557] task:rmmod state:D stack: 0 pid: 2119 ppid: 2114 flags:0x00400208 [ 247.133905] Call trace: [ 247.136644] __switch_to+0x130/0x170 [ 247.140643] __schedule+0x714/0xa0c [ 247.144548] schedule_preempt_disabled+0x88/0xf4 [ 247.149714] __mutex_lock_common+0x43c/0x750 [ 247.154496] mutex_lock_nested+0x5c/0x68 [ 247.158884] cfg80211_netdev_notifier_call+0x280/0x4e0 [cfg80211] [ 247.165769] raw_notifier_call_chain+0x4c/0x78 [ 247.170742] call_netdevice_notifiers_info+0x68/0xa4 [ 247.176305] __dev_close_many+0x7c/0x138 [ 247.180693] dev_close_many+0x7c/0x10c [ 247.184893] unregister_netdevice_many+0xfc/0x654 [ 247.190158] unregister_netdevice_queue+0xb4/0xe0 [ 247.195424] _cfg80211_unregister_wdev+0xa4/0x204 [cfg80211] [ 247.201816] cfg80211_unregister_wdev+0x20/0x2c [cfg80211] [ 247.208016] mwifiex_del_virtual_intf+0xc8/0x188 [mwifiex] [ 247.214174] mwifiex_uninit_sw+0x158/0x1b0 [mwifiex] [ 247.219747] mwifiex_remove_card+0x38/0xa0 [mwifiex] [ 247.225316] mwifiex_pcie_remove+0xd0/0xe0 [mwifiex_pcie] [ 247.231451] pci_device_remove+0x50/0xe0 [ 247.235849] device_release_driver_internal+0x110/0x1b0 [ 247.241701] driver_detach+0x5c/0x9c [ 247.245704] bus_remove_driver+0x84/0xb8 [ 247.250095] driver_unregister+0x3c/0x60 [ 247.254486] pci_unregister_driver+0x2c/0x90 [ 247.259267] cleanup_module+0x18/0xcdc [mwifiex_pcie] Fixes: a05829a7222e ("cfg80211: avoid holding the RTNL when calling the driver") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-wireless/98392296-40ee-6300-369c-32e16cff3725@gmail.com/ Link: https://lore.kernel.org/linux-wireless/ab4d00ce52f32bd8e45ad0448a44737e@bewaar.me/ Reported-by: Maximilian Luz <luzmaximilian@gmail.com> Reported-by: dave@bewaar.me Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Brian Norris <briannorris@chromium.org> Tested-by: Maximilian Luz <luzmaximilian@gmail.com> Tested-by: Dave Olsthoorn <dave@bewaar.me> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210515024227.2159311-1-briannorris@chromium.org
2021-05-17mwifiex: re-fix for unaligned accessesArnd Bergmann
A patch from 2017 changed some accesses to DMA memory to use get_unaligned_le32() and similar interfaces, to avoid problems with doing unaligned accesson uncached memory. However, the change in the mwifiex_pcie_alloc_sleep_cookie_buf() function ended up changing the size of the access instead, as it operates on a pointer to u8. Change this function back to actually access the entire 32 bits. Note that the pointer is aligned by definition because it came from dma_alloc_coherent(). Fixes: 92c70a958b0b ("mwifiex: fix for unaligned reads") Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-04-17mwifiex: Remove unneeded variable: "ret"zuoqilin
Remove unneeded variable: "ret" Signed-off-by: zuoqilin <zuoqilin@yulong.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210317063353.1055-1-zuoqilin1@163.com
2021-04-17mwifiex: don't print SSID to logsBrian Norris
There are a few reasons not to dump SSIDs as-is in kernel logs: 1) they're not guaranteed to be any particular text encoding (UTF-8, ASCII, ...) in general 2) it's somewhat redundant; the BSSID should be enough to uniquely identify the AP/STA to which we're connecting 3) BSSIDs have an easily-recognized format, whereas SSIDs do not (they are free-form) 4) other common drivers (e.g., everything based on mac80211) get along just fine by only including BSSIDs when logging state transitions Additional notes on reason #3: this is important for the privacy-conscious, especially when providing tools that convey kernel logs on behalf of a user -- e.g., when reporting bugs. So for example, it's easy to automatically filter logs for MAC addresses, but it's much harder to filter SSIDs out of unstructured text. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210225024454.4106485-1-briannorris@chromium.org
2021-02-08mwifiex: Report connected BSS with cfg80211_connect_bss()Yen-lin Lai
When a network is moved or reconfigured on the different channel, there can be multiple BSSes with the same BSSID and SSID in scan result before the old one expires. Then, it can cause cfg80211_connect_result to map current_bss to a bss with the wrong channel. Let mwifiex_cfg80211_assoc return the selected BSS and then the caller can report it cfg80211_connect_bss. Signed-off-by: Yen-lin Lai <yenlinlai@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20210201070649.1667209-1-yenlinlai@chromium.org
2021-02-06Merge tag 'wireless-drivers-next-2021-02-05' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.12 First set of patches for v5.12. A smaller pull request this time, biggest feature being a better key handling for ath9k. And of course the usual fixes and cleanups all over. Major changes: ath9k * more robust encryption key cache management brcmfmac * support BCM4365E with 43666 ChipCommon chip ID * tag 'wireless-drivers-next-2021-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (35 commits) iwl4965: do not process non-QOS frames on txq->sched_retry path mt7601u: process tx URBs with status EPROTO properly wlcore: Fix command execute failure 19 for wl12xx mt7601u: use ieee80211_rx_list to pass frames to the network stack as a batch rtw88: 8723de: adjust the LTR setting rtlwifi: rtl8821ae: fix bool comparison in expressions rtlwifi: rtl8192se: fix bool comparison in expressions rtlwifi: rtl8188ee: fix bool comparison in expressions rtlwifi: rtl8192c-common: fix bool comparison in expressions rtlwifi: rtl_pci: fix bool comparison in expressions wlcore: Downgrade exceeded max RX BA sessions to debug wilc1000: use flexible-array member instead of zero-length array brcmfmac: clear EAP/association status bits on linkdown events brcmfmac: Delete useless kfree code qtnfmac_pcie: Use module_pci_driver mt7601u: check the status of device in calibration mt7601u: process URBs in status EPROTO properly brcmfmac: support BCM4365E with 43666 ChipCommon chip ID wilc1000: fix spelling mistake in Kconfig "devision" -> "division" mwifiex: pcie: Drop bogus __refdata annotation ... ==================== Link: https://lore.kernel.org/r/20210205161901.C7F83C433ED@smtp.codeaurora.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26cfg80211: avoid holding the RTNL when calling the driverJohannes Berg
Currently, _everything_ in cfg80211 holds the RTNL, and if you have a slow USB device (or a few) you can get some bad lock contention on that. Fix that by re-adding a mutex to each wiphy/rdev as we had at some point, so we have locking for the wireless_dev lists and all the other things in there, and also so that drivers still don't have to worry too much about it (they still won't get parallel calls for a single device). Then, we can restrict the RTNL to a few cases where we add or remove interfaces and really need the added protection. Some of the global list management still also uses the RTNL, since we need to have it anyway for netdev management, but we only hold the RTNL for very short periods of time here. Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-22cfg80211: change netdev registration/unregistration semanticsJohannes Berg
We used to not require anything in terms of registering netdevs with cfg80211, using a netdev notifier instead. However, in the next patch reducing RTNL locking, this causes big problems, and the simplest way is to just require drivers to do things better. Change the registration/unregistration semantics to require the drivers to call cfg80211_(un)register_netdevice() when this is happening due to a cfg80211 request, i.e. add_virtual_intf() or del_virtual_intf() (or if it somehow has to happen in any other cfg80211 callback). Otherwise, in other contexts, drivers may continue to use the normal netdev (un)registration functions as usual. Internally, we still use the netdev notifier and track (by the new wdev->registered bool) if the wdev had already been added to cfg80211 or not. Link: https://lore.kernel.org/r/20210122161942.cf2f4b65e4e9.Ida8234e50da13eb675b557bac52a713ad4eddf71@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-14mwifiex: pcie: Drop bogus __refdata annotationGeert Uytterhoeven
As the Marvell PCIE WiFi-Ex driver does not have any code or data located in initmem, there is no need to annotate the mwifiex_pcie structure with __refdata. Drop the annotation, to avoid suppressing future section warnings. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201211133835.2970384-1-geert+renesas@glider.be
2020-12-08mwifiex: Fix possible buffer overflows in mwifiex_cmd_802_11_ad_hoc_startZhang Xiaohui
mwifiex_cmd_802_11_ad_hoc_start() calls memcpy() without checking the destination size may trigger a buffer overflower, which a local user could use to cause denial of service or the execution of arbitrary code. Fix it by putting the length check before calling memcpy(). Signed-off-by: Zhang Xiaohui <ruc_zhangxiaohui@163.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201206084801.26479-1-ruc_zhangxiaohui@163.com
2020-12-07mwifiex: change license text of Makefile and README from MARVELL to NXPGanapathi Bhat
As of 6-DEC-2019, NXP has acquired Marvell’s Wireless business unit. This change is to update the license text accordingly. commit 932183aa35c6 ("mwifiex: change license text from MARVELL to NXP") does this, but it left out two files. Signed-off-by: James Cao <zheng.cao@nxp.com> Signed-off-by: Cathy Luo <xiaohua.luo@nxp.com> Signed-off-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1606814307-32715-1-git-send-email-ganapathi.bhat@nxp.com
2020-11-24mwifiex: Remove duplicated REG_PORT definitionJisheng Zhang
The REG_PORT is defined twice, so remove one of them. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201119101204.72fd5f0a@xhacker.debian
2020-11-24mwifiex: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple break statements instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201117160958.GA18807@embeddedor
2020-11-10mwifiex: pcie: skip cancel_work_sync() on reset failure pathTsuchiya Yuto
If a reset is performed, but even the reset fails for some reasons (e.g., on Surface devices, the fw reset requires another quirks), cancel_work_sync() hangs in mwifiex_cleanup_pcie(). # firmware went into a bad state [...] [ 1608.281690] mwifiex_pcie 0000:03:00.0: info: shutdown mwifiex... [ 1608.282724] mwifiex_pcie 0000:03:00.0: rx_pending=0, tx_pending=1, cmd_pending=0 [ 1608.292400] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 1608.292405] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed # reset performed after firmware went into a bad state [ 1609.394320] mwifiex_pcie 0000:03:00.0: WLAN FW already running! Skip FW dnld [ 1609.394335] mwifiex_pcie 0000:03:00.0: WLAN FW is active # but even the reset failed [ 1619.499049] mwifiex_pcie 0000:03:00.0: mwifiex_cmd_timeout_func: Timeout cmd id = 0xfa, act = 0xe000 [ 1619.499094] mwifiex_pcie 0000:03:00.0: num_data_h2c_failure = 0 [ 1619.499103] mwifiex_pcie 0000:03:00.0: num_cmd_h2c_failure = 0 [ 1619.499110] mwifiex_pcie 0000:03:00.0: is_cmd_timedout = 1 [ 1619.499117] mwifiex_pcie 0000:03:00.0: num_tx_timeout = 0 [ 1619.499124] mwifiex_pcie 0000:03:00.0: last_cmd_index = 0 [ 1619.499133] mwifiex_pcie 0000:03:00.0: last_cmd_id: fa 00 07 01 07 01 07 01 07 01 [ 1619.499140] mwifiex_pcie 0000:03:00.0: last_cmd_act: 00 e0 00 00 00 00 00 00 00 00 [ 1619.499147] mwifiex_pcie 0000:03:00.0: last_cmd_resp_index = 3 [ 1619.499155] mwifiex_pcie 0000:03:00.0: last_cmd_resp_id: 07 81 07 81 07 81 07 81 07 81 [ 1619.499162] mwifiex_pcie 0000:03:00.0: last_event_index = 2 [ 1619.499169] mwifiex_pcie 0000:03:00.0: last_event: 58 00 58 00 58 00 58 00 58 00 [ 1619.499177] mwifiex_pcie 0000:03:00.0: data_sent=0 cmd_sent=1 [ 1619.499185] mwifiex_pcie 0000:03:00.0: ps_mode=0 ps_state=0 [ 1619.499215] mwifiex_pcie 0000:03:00.0: info: _mwifiex_fw_dpc: unregister device # mwifiex_pcie_work hang happening [ 1823.233923] INFO: task kworker/3:1:44 blocked for more than 122 seconds. [ 1823.233932] Tainted: G WC OE 5.10.0-rc1-1-mainline #1 [ 1823.233935] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1823.233940] task:kworker/3:1 state:D stack: 0 pid: 44 ppid: 2 flags:0x00004000 [ 1823.233960] Workqueue: events mwifiex_pcie_work [mwifiex_pcie] [ 1823.233965] Call Trace: [ 1823.233981] __schedule+0x292/0x820 [ 1823.233990] schedule+0x45/0xe0 [ 1823.233995] schedule_timeout+0x11c/0x160 [ 1823.234003] wait_for_completion+0x9e/0x100 [ 1823.234012] __flush_work.isra.0+0x156/0x210 [ 1823.234018] ? flush_workqueue_prep_pwqs+0x130/0x130 [ 1823.234026] __cancel_work_timer+0x11e/0x1a0 [ 1823.234035] mwifiex_cleanup_pcie+0x28/0xd0 [mwifiex_pcie] [ 1823.234049] mwifiex_free_adapter+0x24/0xe0 [mwifiex] [ 1823.234060] _mwifiex_fw_dpc+0x294/0x560 [mwifiex] [ 1823.234074] mwifiex_reinit_sw+0x15d/0x300 [mwifiex] [ 1823.234080] mwifiex_pcie_reset_done+0x50/0x80 [mwifiex_pcie] [ 1823.234087] pci_try_reset_function+0x5c/0x90 [ 1823.234094] process_one_work+0x1d6/0x3a0 [ 1823.234100] worker_thread+0x4d/0x3d0 [ 1823.234107] ? rescuer_thread+0x410/0x410 [ 1823.234112] kthread+0x142/0x160 [ 1823.234117] ? __kthread_bind_mask+0x60/0x60 [ 1823.234124] ret_from_fork+0x22/0x30 [...] This is a deadlock caused by calling cancel_work_sync() in mwifiex_cleanup_pcie(): - Device resets are done via mwifiex_pcie_card_reset() - which schedules card->work to call mwifiex_pcie_card_reset_work() - which calls pci_try_reset_function(). - This leads to mwifiex_pcie_reset_done() be called on the same workqueue, which in turn calls - mwifiex_reinit_sw() and that calls - _mwifiex_fw_dpc(). The problem is now that _mwifiex_fw_dpc() calls mwifiex_free_adapter() in case firmware initialization fails. That ends up calling mwifiex_cleanup_pcie(). Note that all those calls are still running on the workqueue. So when mwifiex_cleanup_pcie() now calls cancel_work_sync(), it's really waiting on itself to complete, causing a deadlock. This commit fixes the deadlock by skipping cancel_work_sync() on a reset failure path. After this commit, when reset fails, the following output is expected to be shown: kernel: mwifiex_pcie 0000:03:00.0: info: _mwifiex_fw_dpc: unregister device kernel: mwifiex: Failed to bring up adapter: -5 kernel: mwifiex_pcie 0000:03:00.0: reinit failed: -5 To reproduce this issue, for example, try putting the root port of wifi into D3 (replace "00:1d.3" with your setup). # put into D3 (root port) sudo setpci -v -s 00:1d.3 CAP_PM+4.b=0b Cc: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201028142346.18355-1-kitakar@gmail.com
2020-11-10mwifiex: update comment for shutdown_sw()/reinit_sw() to reflect current stateTsuchiya Yuto
The functions mwifiex_shutdown_sw() and mwifiex_reinit_sw() can be used for more general purposes than the PCIe function level reset. Also, these are even not PCIe-specific. So, let's update the comments at the top of each function accordingly. Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201028142110.18144-3-kitakar@gmail.com
2020-11-10mwifiex: fix mwifiex_shutdown_sw() causing sw reset failureTsuchiya Yuto
When a PCIe function level reset (FLR) is performed but without fw reset for some reasons (e.g., on Microsoft Surface devices, fw reset requires other quirks), it fails to reset wifi properly. You can trigger the issue on such devices via debugfs entry for reset: $ echo 1 | sudo tee /sys/kernel/debug/mwifiex/mlan0/reset and the resulting dmesg log: [ 45.740508] mwifiex_pcie 0000:03:00.0: Resetting per request [ 45.742937] mwifiex_pcie 0000:03:00.0: info: successfully disconnected from [BSSID]: reason code 3 [ 45.744666] mwifiex_pcie 0000:03:00.0: info: shutdown mwifiex... [ 45.751530] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.751539] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771691] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771695] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771697] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771698] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771699] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771701] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771702] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771703] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771704] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771705] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771707] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771708] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 53.099343] mwifiex_pcie 0000:03:00.0: info: trying to associate to '[SSID]' bssid [BSSID] [ 53.241870] mwifiex_pcie 0000:03:00.0: info: associated to bssid [BSSID] successfully [ 75.377942] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110 [ 85.385491] mwifiex_pcie 0000:03:00.0: info: successfully disconnected from [BSSID]: reason code 15 [ 87.539408] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110 [ 87.539412] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 99.699917] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110 [ 99.699925] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 111.859802] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110 [ 111.859808] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [...] When comparing mwifiex_shutdown_sw() with mwifiex_pcie_remove(), it lacks mwifiex_init_shutdown_fw(). This commit fixes mwifiex_shutdown_sw() by adding the missing mwifiex_init_shutdown_fw(). Fixes: 4c5dae59d2e9 ("mwifiex: add PCIe function level reset support") Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201028142110.18144-2-kitakar@gmail.com
2020-11-07mwifiex: pcie: Remove a couple of unchecked 'ret'sLee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/marvell/mwifiex/pcie.c: In function ‘mwifiex_pcie_remove’: drivers/net/wireless/marvell/mwifiex/pcie.c:432:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/marvell/mwifiex/pcie.c: In function ‘mwifiex_cleanup_pcie’: drivers/net/wireless/marvell/mwifiex/pcie.c:3142:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com> Cc: Xinming Hu <huxinming820@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-32-lee.jones@linaro.org
2020-10-08mwifiex: fix double freeTom Rix
clang static analysis reports this problem: sdio.c:2403:3: warning: Attempt to free released memory kfree(card->mpa_rx.buf); ^~~~~~~~~~~~~~~~~~~~~~~ When mwifiex_init_sdio() fails in its first call to mwifiex_alloc_sdio_mpa_buffer, it falls back to calling it again. If the second alloc of mpa_tx.buf fails, the error handler will try to free the old, previously freed mpa_rx.buf. Reviewing the code, it looks like a second double free would happen with mwifiex_cleanup_sdio(). So set both pointers to NULL when they are freed. Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201004131931.29782-1-trix@redhat.com
2020-09-29net: mwifiex: Use netif_rx_any_context().Sebastian Andrzej Siewior
The usage of in_interrupt() in non-core code is phased out. Ideally the information of the calling context should be passed by the callers or the functions be split as appropriate. mwifiex uses in_interupt() to select the netif_rx*() variant which matches the calling context. The attempt to consolidate the code by passing an arguemnt or by distangling it failed due lack of knowledge about this driver and because the call chains are hard to follow. As a stop gap use netif_rx_any_context() which invokes the correct code path depending on context and confines the in_interrupt() usage to core code. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09mwifiex: remove function pointer checkTom Rix
clang static analyzer reports this problem init.c:739:8: warning: Called function pointer is null (null dereference) ret = adapter->if_ops.check_fw_status( ... ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In mwifiex_dnld_fw, there is an earlier check for check_fw_status(), The check was introduced for usb support at the same time this check in _mwifiex_fw_dpc() was made if (adapter->if_ops.dnld_fw) { ret = adapter->if_ops.dnld_fw(adapter, &fw); } else { ret = mwifiex_dnld_fw(adapter, &fw); } And a dnld_fw function initialized as part the usb's mwifiex_if_ops. The other instances of mwifiex_if_ops for pci and sdio both set check_fw_status. So the first check is not needed and can be removed. Fixes: 4daffe354366 ("mwifiex: add support for Marvell USB8797 chipset") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200906200548.18053-1-trix@redhat.com
2020-09-07mwifiex: sdio: Fix -Wunused-const-variable warningsYueHaibing
These variables only used in sdio.c, move them to .c file can silence these warnings: In file included from drivers/net/wireless/marvell/mwifiex//main.h:59:0, from drivers/net/wireless/marvell/mwifiex//cfp.c:24: drivers/net/wireless/marvell/mwifiex//sdio.h:705:41: warning: ‘mwifiex_sdio_sd8801’ defined but not used [-Wunused-const-variable=] static const struct mwifiex_sdio_device mwifiex_sdio_sd8801 = { ^~~~~~~~~~~~~~~~~~~ drivers/net/wireless/marvell/mwifiex//sdio.h:689:41: warning: ‘mwifiex_sdio_sd8987’ defined but not used [-Wunused-const-variable=] static const struct mwifiex_sdio_device mwifiex_sdio_sd8987 = { ^~~~~~~~~~~~~~~~~~~ drivers/net/wireless/marvell/mwifiex//sdio.h:674:41: warning: ‘mwifiex_sdio_sd8887’ defined but not used [-Wunused-const-variable=] static const struct mwifiex_sdio_device mwifiex_sdio_sd8887 = { ^~~~~~~~~~~~~~~~~~~ drivers/net/wireless/marvell/mwifiex//sdio.h:658:41: warning: ‘mwifiex_sdio_sd8997’ defined but not used [-Wunused-const-variable=] static const struct mwifiex_sdio_device mwifiex_sdio_sd8997 = { ^~~~~~~~~~~~~~~~~~~ drivers/net/wireless/marvell/mwifiex//sdio.h:642:41: warning: ‘mwifiex_sdio_sd8977’ defined but not used [-Wunused-const-variable=] static const struct mwifiex_sdio_device mwifiex_sdio_sd8977 = { ^~~~~~~~~~~~~~~~~~~ drivers/net/wireless/marvell/mwifiex//sdio.h:627:41: warning: ‘mwifiex_sdio_sd8897’ defined but not used [-Wunused-const-variable=] static const struct mwifiex_sdio_device mwifiex_sdio_sd8897 = { ^~~~~~~~~~~~~~~~~~~ drivers/net/wireless/marvell/mwifiex//sdio.h:612:41: warning: ‘mwifiex_sdio_sd8797’ defined but not used [-Wunused-const-variable=] static const struct mwifiex_sdio_device mwifiex_sdio_sd8797 = { ^~~~~~~~~~~~~~~~~~~ drivers/net/wireless/marvell/mwifiex//sdio.h:597:41: warning: ‘mwifiex_sdio_sd8787’ defined but not used [-Wunused-const-variable=] static const struct mwifiex_sdio_device mwifiex_sdio_sd8787 = { ^~~~~~~~~~~~~~~~~~~ drivers/net/wireless/marvell/mwifiex//sdio.h:582:41: warning: ‘mwifiex_sdio_sd8786’ defined but not used [-Wunused-const-variable=] static const struct mwifiex_sdio_device mwifiex_sdio_sd8786 = { ^~~~~~~~~~~~~~~~~~~ Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200902141155.30144-1-yuehaibing@huawei.com
2020-09-07mwifiex: wmm: Fix -Wunused-const-variable warningsYueHaibing
In file included from drivers/net/wireless/marvell/mwifiex//cmdevt.c:26:0: drivers/net/wireless/marvell/mwifiex//wmm.h:41:17: warning: ‘tos_to_tid_inv’ defined but not used [-Wunused-const-variable=] static const u8 tos_to_tid_inv[] = { ^~~~~~~~~~~~~~ drivers/net/wireless/marvell/mwifiex//wmm.h:34:18: warning: ‘mwifiex_1d_to_wmm_queue’ defined but not used [-Wunused-const-variable=] static const u16 mwifiex_1d_to_wmm_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 }; ^~~~~~~~~~~~~~~~~~~~~~~ move the variables definition to .c file, and leave declarations in the header file to fix these warnings. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200902140846.29024-1-yuehaibing@huawei.com
2020-09-07mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFONathan Chancellor
A new warning in clang points out when macro expansion might result in a GNU C statement expression. There is an instance of this in the mwifiex driver: drivers/net/wireless/marvell/mwifiex/cmdevt.c:217:34: warning: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Wcompound-token-split-by-macro] host_cmd->seq_num = cpu_to_le16(HostCmd_SET_SEQ_NO_BSS_INFO ^~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/marvell/mwifiex/fw.h:519:46: note: expanded from macro 'HostCmd_SET_SEQ_NO_BSS_INFO' (((type) & 0x000f) << 12); } ^ This does not appear to be a real issue. Removing the braces and replacing them with parentheses will fix the warning and not change the meaning of the code. Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1146 Reported-by: Andy Lavr <andy.lavr@gmail.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200901070834.1015754-1-natechancellor@gmail.com
2020-09-01mwifiex: pcie: Move tables to the only place they're usedLee Jones
Saves on 10's of complains about 'defined but not used' variables. Fixes the following W=1 kernel build warning(s): In file included from drivers/net/wireless/marvell/mwifiex/main.h:57, from drivers/net/wireless/marvell/mwifiex/main.c:22: drivers/net/wireless/marvell/mwifiex/pcie.h:310:41: warning: ‘mwifiex_pcie8997’ defined but not used [-Wunused-const-variable=] 310 | static const struct mwifiex_pcie_device mwifiex_pcie8997 = { | ^~~~~~~~~~~~~~~~ drivers/net/wireless/marvell/mwifiex/pcie.h:300:41: warning: ‘mwifiex_pcie8897’ defined but not used [-Wunused-const-variable=] 300 | static const struct mwifiex_pcie_device mwifiex_pcie8897 = { | ^~~~~~~~~~~~~~~~ drivers/net/wireless/marvell/mwifiex/pcie.h:292:41: warning: ‘mwifiex_pcie8766’ defined but not used [-Wunused-const-variable=] 292 | static const struct mwifiex_pcie_device mwifiex_pcie8766 = { | ^~~~~~~~~~~~~~~~ NB: Repeats 10's of times - snipped for brevity. Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com> Cc: Xinming Hu <huxinming820@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200826093401.1458456-2-lee.jones@linaro.org
2020-08-27mwifiex: Increase AES key storage size to 256 bitsMaximilian Luz
Following commit e18696786548 ("mwifiex: Prevent memory corruption handling keys") the mwifiex driver fails to authenticate with certain networks, specifically networks with 256 bit keys, and repeatedly asks for the password. The kernel log repeats the following lines (id and bssid redacted): mwifiex_pcie 0000:01:00.0: info: trying to associate to '<id>' bssid <bssid> mwifiex_pcie 0000:01:00.0: info: associated to bssid <bssid> successfully mwifiex_pcie 0000:01:00.0: crypto keys added mwifiex_pcie 0000:01:00.0: info: successfully disconnected from <bssid>: reason code 3 Tracking down this problem lead to the overflow check introduced by the aforementioned commit into mwifiex_ret_802_11_key_material_v2(). This check fails on networks with 256 bit keys due to the current storage size for AES keys in struct mwifiex_aes_param being only 128 bit. To fix this issue, increase the storage size for AES keys to 256 bit. Fixes: e18696786548 ("mwifiex: Prevent memory corruption handling keys") Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Reported-by: Kaloyan Nikolov <konik98@gmail.com> Tested-by: Kaloyan Nikolov <konik98@gmail.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200825153829.38043-1-luzmaximilian@gmail.com
2020-08-27mwifiex: don't call del_timer_sync() on uninitialized timerTetsuo Handa
syzbot is reporting that del_timer_sync() is called from mwifiex_usb_cleanup_tx_aggr() from mwifiex_unregister_dev() without checking timer_setup() from mwifiex_usb_tx_init() was called [1]. Ganapathi Bhat proposed a possibly cleaner fix, but it seems that that fix was forgotten [2]. "grep -FrB1 'del_timer' drivers/ | grep -FA1 '.function)'" says that currently there are 28 locations which call del_timer[_sync]() only if that timer's function field was initialized (because timer_setup() sets that timer's function field). Therefore, let's use same approach here. [1] https://syzkaller.appspot.com/bug?id=26525f643f454dd7be0078423e3cdb0d57744959 [2] https://lkml.kernel.org/r/CA+ASDXMHt2gq9Hy+iP_BYkWXsSreWdp3_bAfMkNcuqJ3K+-jbQ@mail.gmail.com Reported-by: syzbot <syzbot+dc4127f950da51639216@syzkaller.appspotmail.com> Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Brian Norris <briannorris@chromium.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821082720.7716-1-penguin-kernel@I-love.SAKURA.ne.jp
2020-08-27mwifiex: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821064720.GA22182@embeddedor
2020-08-27mwifiex: Clean up some err and dbg messagesChristophe JAILLET
The error message if 'pci_set_consistent_dma_mask()' fails is misleading. The function call uses 32 bits, but the error message reports 64. Moreover, according to the comment above 'dma_set_mask_and_coherent()' definition, such an error can never happen. So, simplify code, axe the misleading message and use 'dma_set_mask_and_coherent()' instead of 'dma_set_mask()' + 'dma_set_coherent_mask()' While at it, make some clean-up: - add # when reporting allocated length to be consistent between functions - s/consistent/coherent/ - s/unsigned int/u32/ to be consistent between functions - align some code Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819071853.113185-1-christophe.jaillet@wanadoo.fr
2020-08-27mwifiex: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'mwifiex_pcie_alloc_buffers()' (see details in the call chain below) GFP_KERNEL can be used because both 'mwifiex_register()' and 'mwifiex_reinit_sw()' already use GFP_KERNEL. (for 'mwifiex_reinit_sw()', it is hidden in a call to 'alloc_workqueue()') The call chain is: mwifiex_register --> mwifiex_init_pcie (.init_if function, see mwifiex_if_ops) [ or ] mwifiex_reinit_sw -->mwifiex_pcie_up_dev (.up_dev function, see mwifiex_if_ops) [ then in both case ] -->mwifiex_pcie_alloc_buffers --> mwifiex_pcie_create_txbd_ring --> mwifiex_pcie_create_rxbd_ring --> mwifiex_pcie_create_evtbd_ring --> mwifiex_pcie_alloc_sleep_cookie_buf @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819070152.111522-1-christophe.jaillet@wanadoo.fr
2020-08-18mwifiex: Do not use GFP_KERNEL in atomic contextChristophe JAILLET
A possible call chain is as follow: mwifiex_sdio_interrupt (sdio.c) --> mwifiex_main_process (main.c) --> mwifiex_process_cmdresp (cmdevt.c) --> mwifiex_process_sta_cmdresp (sta_cmdresp.c) --> mwifiex_ret_802_11_scan (scan.c) --> mwifiex_parse_single_response_buf (scan.c) 'mwifiex_sdio_interrupt()' is an interrupt function. Also note that 'mwifiex_ret_802_11_scan()' already uses GFP_ATOMIC. So use GFP_ATOMIC instead of GFP_KERNEL when memory is allocated in 'mwifiex_parse_single_response_buf()'. Fixes: 7c6fa2a843c5 ("mwifiex: use cfg80211 dynamic scan table and cfg80211_get_bss API") or Fixes: 601216e12c65e ("mwifiex: process RX packets in SDIO IRQ thread directly") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200809092906.744621-1-christophe.jaillet@wanadoo.fr
2020-08-04Merge tag 'wireless-drivers-next-2020-08-04' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.9 Second set of patches for v5.9. mt76 has most of patches this time. Otherwise it's just smaller fixes and cleanups to other drivers. There was a major conflict in mt76 driver between wireless-drivers and wireless-drivers-next. I solved that by merging the former to the latter. Major changes: rtw88 * add support for ieee80211_ops::change_interface * add support for enabling and disabling beacon * add debugfs file for testing h2c mt76 * ARP filter offload for 7663 * runtime power management for 7663 * testmode support for mfg calibration * support for more channels ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-02mwifiex: 11n_rxreorder: Remove unnecessary cast in kfree()Xu Wang
Remove unnecassary casts in the argument to kfree. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200727020405.8476-1-vulab@iscas.ac.cn
2020-07-31Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2020-07-31 Here's the main bluetooth-next pull request for 5.9: - Fix firmware filenames for Marvell chipsets - Several suspend-related fixes - Addedd mgmt commands for runtime configuration - Multiple fixes for Qualcomm-based controllers - Add new monitoring feature for mgmt - Fix handling of legacy cipher (E4) together with security level 4 - Add support for Realtek 8822CE controller - Fix issues with Chinese controllers using fake VID/PID values - Multiple other smaller fixes & improvements ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-15mwifiex: Prevent memory corruption handling keysDan Carpenter
The length of the key comes from the network and it's a 16 bit number. It needs to be capped to prevent a buffer overflow. Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200708115857.GA13729@mwanda
2020-07-15mwifiex: Fix reporting 'operation not supported' error codePali Rohár
ENOTSUPP (double PP) is internal linux kernel code 524 available only in kernel include file linux/errno.h and not exported to userspace. EOPNOTSUPP (OP; double PP) is standard code 95 for reporting 'operation not supported' available via kernel include file uapi/asm-generic/errno.h. ENOTSUP (single P) is alias for EOPNOTSUPP defined only in userspace include file bits/errno.h and not available in kernel. Because Linux kernel does not support ENOTSUP (single P) and because userspace does not support ENOTSUPP (double PP), report error code for 'operation not supported' via EOPNOTSUPP macro. This patch fixes problem that mwifiex kernel driver sends to userspace unsupported error codes like: "failed: -524 (No error information)". After applying this patch userspace see: "failed: -95 (Not supported)". Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200703112151.18917-1-pali@kernel.org
2020-07-15mwifiex: Use macro MWIFIEX_MAX_BSS_NUM for specifying limit of interfacesPali Rohár
This macro is already used in mwifiex driver for specifying upper limit and is defined to value 3. So use it also in struct ieee80211_iface_limit. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200626152938.12737-1-pali@kernel.org
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz Augusto von Dentz. 2) Add GSO partial support to igc, from Sasha Neftin. 3) Several cleanups and improvements to r8169 from Heiner Kallweit. 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a device self-test. From Andrew Lunn. 5) Start moving away from custom driver versions, use the globally defined kernel version instead, from Leon Romanovsky. 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin. 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet. 8) Add sriov and vf support to hinic, from Luo bin. 9) Support Media Redundancy Protocol (MRP) in the bridging code, from Horatiu Vultur. 10) Support netmap in the nft_nat code, from Pablo Neira Ayuso. 11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina Dubroca. Also add ipv6 support for espintcp. 12) Lots of ReST conversions of the networking documentation, from Mauro Carvalho Chehab. 13) Support configuration of ethtool rxnfc flows in bcmgenet driver, from Doug Berger. 14) Allow to dump cgroup id and filter by it in inet_diag code, from Dmitry Yakunin. 15) Add infrastructure to export netlink attribute policies to userspace, from Johannes Berg. 16) Several optimizations to sch_fq scheduler, from Eric Dumazet. 17) Fallback to the default qdisc if qdisc init fails because otherwise a packet scheduler init failure will make a device inoperative. From Jesper Dangaard Brouer. 18) Several RISCV bpf jit optimizations, from Luke Nelson. 19) Correct the return type of the ->ndo_start_xmit() method in several drivers, it's netdev_tx_t but many drivers were using 'int'. From Yunjian Wang. 20) Add an ethtool interface for PHY master/slave config, from Oleksij Rempel. 21) Add BPF iterators, from Yonghang Song. 22) Add cable test infrastructure, including ethool interfaces, from Andrew Lunn. Marvell PHY driver is the first to support this facility. 23) Remove zero-length arrays all over, from Gustavo A. R. Silva. 24) Calculate and maintain an explicit frame size in XDP, from Jesper Dangaard Brouer. 25) Add CAP_BPF, from Alexei Starovoitov. 26) Support terse dumps in the packet scheduler, from Vlad Buslov. 27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei. 28) Add devm_register_netdev(), from Bartosz Golaszewski. 29) Minimize qdisc resets, from Cong Wang. 30) Get rid of kernel_getsockopt and kernel_setsockopt in order to eliminate set_fs/get_fs calls. From Christoph Hellwig. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits) selftests: net: ip_defrag: ignore EPERM net_failover: fixed rollback in net_failover_open() Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv" Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv" vmxnet3: allow rx flow hash ops only when rss is enabled hinic: add set_channels ethtool_ops support selftests/bpf: Add a default $(CXX) value tools/bpf: Don't use $(COMPILE.c) bpf, selftests: Use bpf_probe_read_kernel s390/bpf: Use bcr 0,%0 as tail call nop filler s390/bpf: Maintain 8-byte stack alignment selftests/bpf: Fix verifier test selftests/bpf: Fix sample_cnt shared between two threads bpf, selftests: Adapt cls_redirect to call csum_level helper bpf: Add csum_level helper for fixing up csum levels bpf: Fix up bpf_skb_adjust_room helper's skb csum setting sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf() crypto/chtls: IPv6 support for inline TLS Crypto/chcr: Fixes a coccinile check error Crypto/chcr: Fixes compilations warnings ...
2020-06-01mwifiex: Fix firmware filename for sd8997 chipsetPali Rohár
Firmware for sd8997 chipset is distributed by Marvell package and also as part of the linux-firmware repository in filename sdsd8997_combo_v4.bin. This patch fixes mwifiex driver to load correct firmware file for sd8997. Fixes: 6d85ef00d9dfe ("mwifiex: add support for 8997 chipset") Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-06-01mwifiex: Fix firmware filename for sd8977 chipsetPali Rohár
Firmware for sd8977 chipset is distributed by Marvell package and also as part of the linux-firmware repository in filename sdsd8977_combo_v2.bin. This patch fixes mwifiex driver to load correct firmware file for sd8977. Fixes: 1a0f547831dce ("mwifiex: add support for sd8977 chipset") Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2020-05-29mwifiex: Add support for NL80211_ATTR_MAX_AP_ASSOC_STAPali Rohár
SD8997 firmware sends TLV_TYPE_MAX_CONN with struct hw_spec_max_conn to inform kernel about maximum number of p2p connections and stations in AP mode. During initialization of SD8997 wifi chip kernel prints warning: mwifiex_sdio mmc0:0001:1: Unknown GET_HW_SPEC TLV type: 0x217 This patch adds support for parsing TLV_TYPE_MAX_CONN (0x217) and sets appropriate cfg80211 member 'max_ap_assoc_sta' from retrieved structure. It allows userspace to retrieve NL80211_ATTR_MAX_AP_ASSOC_STA attribute. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200521123559.29028-1-pali@kernel.org
2020-05-29mwifiex: Parse all API_VER_ID propertiesPali Rohár
During initialization of SD8997 wifi chip kernel prints warnings: mwifiex_sdio mmc0:0001:1: Unknown api_id: 3 mwifiex_sdio mmc0:0001:1: Unknown api_id: 4 This patch adds support for parsing all api ids provided by SD8997 firmware. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200521123444.28957-1-pali@kernel.org
2020-05-29mmc: sdio: Move SDIO IDs from mwifiex driver to common include filePali Rohár
Add _WLAN suffix to macro names for consistency with other Marvell macros. These IDs represents wlan function of combo bt/wlan cards. Other functions of these cards have different IDs. Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200522144412.19712-4-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
2020-05-26Merge tag 'mac80211-next-for-net-next-2020-04-25' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== One batch of changes, containing: * hwsim improvements from Jouni and myself, to be able to test more scenarios easily * some more HE (802.11ax) support * some initial S1G (sub 1 GHz) work for fractional MHz channels * some (action) frame registration updates to help DPP support * along with other various improvements/fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-18mwifiex: Fix memory corruption in dump_stationPali Rohár
The mwifiex_cfg80211_dump_station() uses static variable for iterating over a linked list of all associated stations (when the driver is in UAP role). This has a race condition if .dump_station is called in parallel for multiple interfaces. This corruption can be triggered by registering multiple SSIDs and calling, in parallel for multiple interfaces iw dev <iface> station dump [16750.719775] Unable to handle kernel paging request at virtual address dead000000000110 ... [16750.899173] Call trace: [16750.901696] mwifiex_cfg80211_dump_station+0x94/0x100 [mwifiex] [16750.907824] nl80211_dump_station+0xbc/0x278 [cfg80211] [16750.913160] netlink_dump+0xe8/0x320 [16750.916827] netlink_recvmsg+0x1b4/0x338 [16750.920861] ____sys_recvmsg+0x7c/0x2b0 [16750.924801] ___sys_recvmsg+0x70/0x98 [16750.928564] __sys_recvmsg+0x58/0xa0 [16750.932238] __arm64_sys_recvmsg+0x28/0x30 [16750.936453] el0_svc_common.constprop.3+0x90/0x158 [16750.941378] do_el0_svc+0x74/0x90 [16750.944784] el0_sync_handler+0x12c/0x1a8 [16750.948903] el0_sync+0x114/0x140 [16750.952312] Code: f9400003 f907f423 eb02007f 54fffd60 (b9401060) [16750.958583] ---[ end trace c8ad181c2f4b8576 ]--- This patch drops the use of the static iterator, and instead every time the function is called iterates to the idx-th position of the linked-list. It would be better to convert the code not to use linked list for associated stations storage (since the chip has a limited number of associated stations anyway - it could just be an array). Such a change may be proposed in the future. In the meantime this patch can backported into stable kernels in this simple form. Fixes: 8baca1a34d4c ("mwifiex: dump station support in uap mode") Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200515075924.13841-1-pali@kernel.org
2020-05-06mwifiex: avoid -Wstringop-overflow warningArnd Bergmann
gcc-10 reports a warning for mwifiex_cmd_802_11_key_material_v1: drivers/net/wireless/marvell/mwifiex/sta_cmd.c: In function 'mwifiex_cmd_802_11_key_material_v1': cc1: warning: writing 16 bytes into a region of size 0 [-Wstringop-overflow=] In file included from drivers/net/wireless/marvell/mwifiex/sta_cmd.c:23: drivers/net/wireless/marvell/mwifiex/fw.h:993:9: note: at offset 0 to object 'action' with size 2 declared here 993 | __le16 action; | ^~~~~~ As the warning makes no sense, I reported it as a bug for gcc. In the meantime using a temporary pointer for the key data makes the code easier to read and stops the warning. Fixes: 5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=94881 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200430213101.135134-4-arnd@arndb.de
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 22:42:52 +0000