summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/libertas
AgeCommit message (Collapse)Author
2009-03-30trivial: Fix misspelling of firmwareNick Andrew
Fix misspelling of firmware. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-27wireless: radiotap updatesJohannes Berg
Radiotap was updated to include a "bad PLCP" flag and standardise the "bad FCS" flag in the "flags" rather than "RX flags" field, this patch updates Linux to that standard. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-21libertas: convert to net_device_opsStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-21libertas: convert to internal net_device_statsStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-01Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-tx.c net/8021q/vlan_core.c net/core/dev.c
2009-02-27libertas: use private SDIO workqueue to avoid scheduling latencyDan Williams
The libertas SDIO interface scheduled the packet worker, resulting in unwanted latency for every data packet or command sent to the firmware. Fix a bug on the SDIO probe error path too. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27libertas: fix power save issue in libertas_sdio moduleBing Zhao
The problem: "iwconfig ethX power on" returns error The cause: "ps_supported" flag was never set for SD8385/8686 The fix: check firmware capabilities returned by GET_HW_SPEC command. Set "ps_supported" to 1 if FW_CAPINFO_PS bit is on. This fix applies to SDIO interface only. Signed-off-by: Bing Zhao <bzhao@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-26libertas: fix misuse of netdev_priv() and dev->ml_privKiran Divekar
The mesh and radiotap interfaces need to use the same private data as the main wifi interface. If the main wifi interface uses netdev_priv(), but the other interfaces ->ml_priv, there's no way to figure out where the private data actually is in the WEXT handlers and netdevice callbacks. So make everything use ->ml_priv. Fixes botched netdev_priv() conversion introduced by "netdevice libertas: Fix directly reference of netdev->priv", though admittedly libertas' use of ->priv was somewhat "special". Signed-off-by: Kiran Divekar <dkiran@marvell.com> Acked-by: Dan Williams <dcbw@redhat.com> Tested-by: Chris Ball <cjb@laptop.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09libertas: pos[4] tested twice, 2nd should be pos[5]Roel Kluin
pos[4] can't be both 0x43 and 0x04, 2nd should be pos[5] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-09libertas: if_spi: add ability to call board specific setup/teardown methodsMike Rapoport
In certain cases it is required to perform board specific actions before activating libertas G-SPI interface. These actions may include power up of the chip, GPIOs setup, proper pin-strapping and SPI controller config. This patch adds ability to call board specific setup/teardown methods Signed-off-by: Mike Rapoport <mike@compulab.co.il> Acked-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29libertas: fix CF firmware loading for some cardsDan Williams
if_cs_poll_while_fw_download() returned the number of iterations remaining on success, which in turn got returned as the value from if_cs_prog_real() and if_cs_prog_helper(). But since if_cs_probe() interprets non-zero return values from firmware load functions as an error, this sometimes caused spurious firmware load failures. Signed-off-by: Dan Williams <dcbw@redhat.com> Tested-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29libertas: if_spi, driver for libertas GSPI devicesColin McCabe
Add initial support for libertas devices using a GSPI interface. This has been tested with the 8686. GSPI is intended to be used on embedded systems. Board-specific parameters are required (see libertas_spi.h). Thanks to everyone who took a look at the earlier versions of the patch. Signed-off-by: Colin McCabe <colin@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29libertas: Update libertas core with GSPI constantsColin McCabe
Add GSPI constants to libertas core. Fix misleading comment in lbs_setup_firmware. Signed-off-by: Colin McCabe <colin@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-21net: constify VFTsJan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@medozas.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-01-16libertas: Fix alignment issues in libertas coreAndrey Yurovsky
Data structures that come over the wire from the WLAN firmware must be packed. This fixes alignment problems on the blackfin architecture and, reportedly, on the AVR32. This is a replacement for the previous version of this patch which had also explicitly used get_unaligned_ macros. As Johannes Berg pointed out, these macros were unnecessary. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: Colin McCabe <colin@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-11drivers/net/wireless/libertas: move a dereference below a NULL testJulia Lawall
In each case, if the NULL test is necessary, then the dereference should be moved below the NULL test. I have also taken advantage of the availability of the value of priv->dev in the subsequent calls to netif_stop_queue and netif_carrier_off. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-19libertas: use roundup instead of opencodingIlpo Järvinen
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12libertas: Create sysfs entry for changing the mesh probe response limitAnna Neal
This patch adds the ability to change the number of probe response retries sent by the mesh interface. In dense networks it is recommended to change this value to zero to reduce traffic congestion. Signed-off-by: Anna Neal <anna@cozybit.com> Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05wireless: clean up radiotap a bitJohannes Berg
No need to pad the header so no constant needed for that, no need to carry any version number from netbsd nor CVS IDs from them. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-03if_usb: Kill directly reference of netdev->privWang Chen
Simply replace netdev->priv with netdev_priv(). Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-21libertas: Fine grained configuration of wake-on-lan.Anna Neal
Based on a patch from Shailendra Govardhan <shailen@marvell.com>. This patch allows implementation of more specific wake-on-lan rules than those of ethtool. Please note that only firmware 5.110.22.p20 and above supports this feature. This patch only implements the driver/firmware interface, not the userspace/driver interface. Signed-off-by: Anna Neal <anna@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-12netdevice: safe convert to netdev_priv() #part-4Wang Chen
We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12netdevice: safe convert to netdev_priv() #part-3Wang Chen
We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-10net: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers
Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-10don't use net/ieee80211.hJohannes Berg
Convert all the drivers using net/ieee80211.h to use linux/ieee80211.h. Contains a bugfix in libertas where the SSID parsing could overrun the buffer when the AP sends invalid information. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Dan Williams <dcbw@redhat.com> [airo, libertas] Acked-by: Pavel Roskin <proski@gnu.org> [orinoco] Acked-by: David Kilroy <kilroyd@googlemail.com> [orinoco] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10netdevice libertas: Fix directly reference of netdev->privWang Chen
We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. OK, becasue Dave S. Miller said, "every direct netdev->priv usage is a bug", and I want to kill netdev->priv later, I decided to convert all the direct reference of netdev->priv first. Different to readonly reference of netdev->priv, in this driver, netdev->priv was changed. I use netdev->ml_priv to replace netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: use individual buffers for printing ssid valuesJohn W. Linville
Also change escape_ssid to print_ssid to match print_mac semantics. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31wireless: consolidate on a single escape_essid implementationJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/p54/p54common.c
2008-10-29libertas: fix buffer overrunJohannes Berg
If somebody sends an invalid beacon/probe response, that can trash the whole BSS descriptor. The descriptor is, luckily, large enough so that it cannot scribble past the end of it; it's well above 400 bytes long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: stable@kernel.org [2.6.24-2.6.27, bug present in some form since driver was added (2.6.22)] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-29libertas: remove two libertas sparse warningHolger Schurig
Johannes Berg detected this two sparse warnings: drivers/net/wireless/libertas/cmd.c:609:16: warning: cast to restricted __le16 drivers/net/wireless/libertas/cmd.c:611:16: warning: cast to restricted __le16 ... but cmd.minlevel is "s8", so we can access it directly and hope for the sign-extension-code in the compiler to convert that to the "s16" type. Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-27net: convert print_mac to %pMJohannes Berg
This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-26libertas: free sk_buff with kfree_skbSergio Luis
free sk_buff with kfree_skb, instead of kree Signed-off-by: Sergio Luis <sergio@larces.uece.br> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits) decnet: Fix compiler warning in dn_dev.c IPV6: Fix default gateway criteria wrt. HIGH/LOW preference radv option net/802/fc.c: Fix compilation warnings netns: correct mib stats in ip6_route_me_harder() netns: fix net_generic array leak rt2x00: fix regression introduced by "mac80211: free up 2 bytes in skb->cb" rtl8187: Add USB ID for Belkin F5D7050 with RTL8187B chip p54usb: Device ID updates mac80211: fixme for kernel-doc ath9k/mac80211: disallow fragmentation in ath9k, report to userspace libertas : Remove unused variable warning for "old_channel" from cmd.c mac80211: Fix scan RX processing oops orinoco: fix unsafe locking in spectrum_cs_suspend orinoco: fix unsafe locking in orinoco_cs_resume cfg80211: fix debugfs error handling mac80211: fix debugfs netdev rename iwlwifi: fix ct kill configuration for 5350 mac80211: fix HT information element parsing p54: Fix compilation problem on PPC mac80211: fix debugfs lockup ...
2008-10-14libertas : Remove unused variable warning for "old_channel" from cmd.cManish Katiyar
Below patch removes the following warning during compilation. drivers/net/wireless/libertas/cmd.c:826: warning: unused variable 'old_channel' Signed-off-by : Manish Katiyar <mkatiyar@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits) pcmcia: ioctl-internal definitions pcmcia: cistpl header cleanup pcmcia: remove unused argument to pcmcia_parse_tuple() pcmcia: card services header cleanup pcmcia: device_id header cleanup pcmcia: encapsulate ioaddr_t pcmcia: cleanup device driver header file pcmcia: cleanup socket services header file pcmcia: merge ds_internal.h into cs_internal.h pcmcia: cleanup cs_internal.h pcmcia: cs_internal.h is internal pcmcia: use dev_printk for cs_error() pcmcia: remove CS_ error codes alltogether pcmcia: deprecate CS_BAD_TUPLE pcmcia: deprecate CS_BAD_ARGS pcmcia: deprecate CS_BAD_BASE, CS_BAD_IRQ, CS_BAD_OFFSET and CS_BAD_SIZE pcmcia: deprecate CS_BAD_ATTRIBUTE, CS_BAD_TYPE and CS_BAD_PAGE pcmcia: deprecate CS_NO_MORE_ITEMS pcmcia: deprecate CS_IN_USE pcmcia: deprecate CS_CONFIGURATION_LOCKED ... Fix trivial conflict in drivers/pcmcia/ds.c manually
2008-09-30libertas: Improvements on automatic tx power control via SIOCSIWTXPOW (fixups)Anna Neal
This patch addresses comments from Dan Williams about the patch committed as "libertas: Improvements on automatic tx power control via SIOCSIWTXPOW." Signed-off-by: Anna Neal <anna@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-24libertas: Reduce the WPA key installation time (fixups)Javier Cardona
This patch addresses comments from Dan Williams about the patch committed as "libertas: Reduce the WPA key installation time." Signed-off-by: Javier Cardona <javier@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15libertas: correct "limited range of data type" warningJohn W. Linville
CC [M] drivers/net/wireless/libertas/wext.o drivers/net/wireless/libertas/wext.c: In function ‘lbs_get_rts’: drivers/net/wireless/libertas/wext.c:307: warning: comparison is always false due to limited range of data type Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15libertas: Reduce the WPA key installation time.Javier Cardona
WPA requires that the PTK is installed immediately after the 4-way handshake in order to properly decrypt the subsequent incoming EAPOL-GTK frame. If the PTK is not enabled by the time the EAPOL-GTK frame arrives, the frame is dropped and the supplicant does not receive the group key. This will happen with fast Access Points that send the EAPOL-GTK frame before the suplicant has successfully installed and enabled the PTK. To mitigate this situation, this patch simplifies and accelerates the SIOCSIWENCODEEXT execution. This patch resolves OLPC ticket 7825 (http://dev.laptop.org/ticket/7825) Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15libertas: convert SNMP_MIB to a direct commandDan Williams
And support setting both long and short retries independently. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15libertas: remove unused generic RESET commandDan Williams
The generic reset command is unused. Each interface type needs to handle the reset command differently since after reset, the firmware is dead and interface-specific mechanisms must be used to reinitialize the card. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11libertas: Improvements on automatic tx power control via SIOCSIWTXPOW.Anna Neal
iwconfig txpower can now be used to set tx power to fixed or auto. If set to auto the default firmware settings are used. The command CMD_802_11_PA_CFG is only sent to older firmware, as Dan Williams noted the command was no longer supported in firmware V9+. Signed-off-by: Anna Neal <anna@cozybit.com> Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11libertas: clear current command on card removalDan Williams
If certain commands were in-flight when the card was pulled or the driver rmmod-ed, cleanup would block on the work queue stopping, but the work queue was in turn blocked on the current command being canceled, which didn't happen. Fix that. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/torvalds/linux-2.6 Conflicts: net/mac80211/mlme.c
2008-09-02wireless/libertas/if_cs.c: fix memory leaksAdrian Bunk
The leak in if_cs_prog_helper() is obvious. It looks a bit as if not freeing "fw" in if_cs_prog_real() was done intentionally, but I'm not seeing why it shouldn't be freed. Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-31pcmcia: remove unused argument to pcmcia_parse_tuple()Dominik Brodowski
Since we're just parsing the tuple being passed to this function, we don't need any device-specific information. Also, remove the call to pcmcia_validate_cis() from pcmciamtd.c, since it is already called by the PCMCIA core. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-29libertas: convert adhoc operations to direct commandsDan Williams
with fixes for v9 and later firmware too. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29libertas: convert CMD_802_11_RADIO_CONTROL to a direct commandDan Williams
and return errors for operations like join & scan that aren't possible when the radio is turned off. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29libertas: convert CMD_802_11_DEAUTHENTICATE to a direct commandDan Williams
and remove DISASSOCIATE because it's not in any of the specs and has never been used. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 05:07:30 +0000