summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi
AgeCommit message (Collapse)Author
2010-11-09iwlwifi: dont use pci_dev before it being assignWey-Yi Guy
In order to use build-in debugging macro, pci_dev in priv need to be assigned first. This fix iwl3945 driver oopsed at boot with 2.6.37-rc1 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-25iwlwifi: quiet a noisy printkDon Fry
Timing issues in microcode for some devices can cause a compressed BA to be sent to the driver prior to returning any a-MPDU notification. Traces show RTS-CTS is exchanged and then the timer fires which causes an empty BA to be sent which acknowledges nothing. This results in a noisy printk. Only print the message if the bitmap is non-zero. Signed-off-by: Don Fry <donald.h.fry@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits) bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL. vlan: Calling vlan_hwaccel_do_receive() is always valid. tproxy: use the interface primary IP address as a default value for --on-ip tproxy: added IPv6 support to the socket match cxgb3: function namespace cleanup tproxy: added IPv6 support to the TPROXY target tproxy: added IPv6 socket lookup function to nf_tproxy_core be2net: Changes to use only priority codes allowed by f/w tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled tproxy: added tproxy sockopt interface in the IPV6 layer tproxy: added udp6_lib_lookup function tproxy: added const specifiers to udp lookup functions tproxy: split off ipv6 defragmentation to a separate module l2tp: small cleanup nf_nat: restrict ICMP translation for embedded header can: mcp251x: fix generation of error frames can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set can-raw: add msg_flags to distinguish local traffic 9p: client code cleanup rds: make local functions/variables static ... Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and drivers/net/wireless/ath/ath9k/debug.c as per David
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-15llseek: automatically add .llseek fopArnd Bergmann
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-10-14iwlwifi: move agn only eeprom functions to separate fileWey-Yi Guy
Some of the functions in iwl-eeprom.c file are for agn devices only, Those functions do not have to be part of iwlcore.ko, so move those to iwl-agn-eeprom.c file. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-14iwlagn: check beacon frame sizeJohannes Berg
When the beacon_skb is NULL, we might still attempt to use it in this code path (if we ever get here) -- make the code a bit more defensive and check the return value of iwl_fill_beacon_frame() against zero. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-14iwlwifi: blink LED in IBSS modeJohannes Berg
We recently found that contrary to expectations, the LED is not blinking in IBSS mode. Fix this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-14iwlwifi: rewrite RXON checksJohannes Berg
The RXON checking is a bit magical, and prints out too much information if something goes wrong. Make it less magical and print out only the items that were actually wrong. Also remove the comment about removing it -- the driver is constantly changing so these checks are useful. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2010-10-14iwlagn: 6050 ops should be used;Wey-Yi Guy
For 6050 series of devices, 6050 ops should be used; One of the 6050 config still use 6000 ops, fix it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-14iwlwifi: clean up some beacon handlingJohannes Berg
There's no need to check for NULL before calling dev_kfree_skb() since it is valid to call it on NULL -- it becomes a no-op. There's also no need to initialise the beacon_skb variable to NULL just after the memory it is in has been kzalloc'ed. Some minor whitespace cleanups, and a lock assertion in a function that needs the mutex (to access the beacon_skb var) complete the patch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-14iwlwifi: rename ibss_beacon variableJohannes Berg
Since we're also going to support AP (GO) mode, the variable isn't used for just IBSS beacons any more -- rename it to not mislead readers. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-14iwlwifi: allow probe-after-rx on 2.4 GHzJohannes Berg
There are two passive 2.4 GHz channels: 12 and 13. If you have a hidden SSID on those, you will not be able to connect to it because we don't send out probe requests there. We can allow this by using the firmware's probe-after-rx functionality on those channels as well. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=16462 Reported-by: Daniel J Blueman <daniel.blueman@gmail.com> Tested-by: Daniel J Blueman <daniel.blueman@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-14iwlgn: need longer tx queue stuck timer for coex devicesWey-Yi Guy
For BT/WiFi combo devices, need longer tx stuck queue timer, so those devices won't reload firmware too often. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-12iwl3945: fix queue allocationJohannes Berg
commit 6f98613258b966ffe0e6def18129b386514d10e0 Author: Jay Sternberg <jay.e.sternberg@intel.com> Date: Sat Sep 18 09:07:04 2010 -0700 iwlagn: reduce redundant parameter definitions broke 3945 because Jay accidentally removed the num_of_queues parameter for 3945, so that we now attempt to allocate a zero-sized queue array, which leads to SLUB returning ZERO_SIZE_PTR (0x10) which we then try to dereference thus crashing the system. Restore the necessary num_of_queues param. This fixes http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2254 Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-12iwlagn: prio_tbl need to download before calibrationWey-Yi Guy
For WiFi/BT combo devices, priority table always need to download before perform any calibration operation. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-12iiwlagn: always download priority tableWey-Yi Guy
For advance BT/WiFi co-exist, always download bt priority table before sending bt_config command Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlagn: add temperature offset calib for 6000g2Shanyu Zhao
6000g2 devices need to have temperature offset calibration. The runtime uCode needs to receive the calibration results just like BB and LO calibration. To do this, driver reads the offset value from NVM and send it to uCode after runtime uCode is alive. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlagn: fix default calibration table sizeShanyu Zhao
iwlagn driver uses the IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE as the chain noise reset calibration index and IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE+1 as the chain noise gain calibration index, if not specified by the TLV value in the new firmware format. However, this is broken if we need to add more calibrations like the temperature offset calibration because we increased IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE by 1. To fix this issue, define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE and use it as the calibration index instead. We still keep the IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE as a sanity check for the TLV value given by ucode. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlagn: no version check for experimental uCodeWey-Yi Guy
For experimental uCode, it should work with the driver if driver has experimental uCode support option enabled; remove the API version checking. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: fix dual-mode scanningJohannes Berg
The recent scanning code shuffle accidentally moved the SCAN_HW bit setting _after_ the PAN parameters are modified, which means that they don't take the scan into account -- fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove iwl_check_bitsJohannes Berg
The function is used exactly once, and the caller doesn't even need the special check, it can be simplified to a simple bit check. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: clean up declarationsJohannes Berg
A number of declarations in iwl-core.h should be in agn specific files, and also rename the iwl-calib.h file to iwl-agn-calib.h to better reflect that it belongs to agn. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove apm_ops.stopJohannes Berg
Since all devices share the same operation here, there's no need to call it indirectly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove set_pwr_src operationJohannes Berg
The set_pwr_src operation is only ever used from within the same sub-driver that it is declared in, so it can just be called directly instead of being an operation. Also, it is never called to set the power source to V_aux, so change the two functions accordingly (but keep the V_aux code for documentation purposes in a comment). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove set_ct_kill operationJohannes Berg
This operation is only ever called from set_hw_params, which is also already based on the config/ops, so that there's no need to have a separate set_ct_kill op and we can just call the right ct_threshold function. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: move iwl_dump_fh to agnJohannes Berg
The iwl_dump_fh function is only used by the agn module, so it can be there instead of being exported by the core. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: move iwl_dump_csr to agnJohannes Berg
The iwl_dump_csr function is only used within the agn module, so it can be moved there instead of being exported by the core. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: move iwl_toggle_rx_ant to agnJohannes Berg
The iwl_toggle_tx_ant function is only used by agn code, so it can be moved into the agn module instead of being exported from the core. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove agn rates info thereJohannes Berg
Code and data related to agn bitrates can be part of the agn module rather than being in the core module. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove spurious exportsJohannes Berg
A number of exports, especially related to thermal throttling, are unnecessary because the code lives in the same module that it is used in, so remove them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: move tx fail code to agnJohannes Berg
The code to print out TX failure reasons is AGN specific, so it can be in the AGN module. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: move agn specific station code thereJohannes Berg
By duplicating a little bit of code between 3945 and agn, we can move a lot of code into an agn specific station management file and thus reduce the amount of code in core that is dead to 3945. before: text data bss dec hex filename 212886 3872 96 216854 34f16 iwlcore.ko 620542 10448 304 631294 9a1fe iwlagn.ko 314013 3264 196 317473 4d821 iwl3945.ko after: text data bss dec hex filename 202857 3872 92 206821 327e5 iwlcore.ko 629102 10448 308 639858 9c372 iwlagn.ko 314240 3264 196 317700 4d904 iwl3945.ko delta: -10029 iwlcore.ko 8560 iwlagn.ko 227 iwl3945.ko so it's a net win even if you have both loaded, likely because a lot of EXPORT_SYMBOLs go away. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: remove verify_signature eeprom operationJohannes Berg
All drivers share the same implementation, so there's no need to call this via a function pointer nor to export it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: rename iwl_mac_beacon_updateJohannes Berg
Rename iwl_mac_beacon_update to iwlcore_beacon_update and make the calling convention a bit different. The old name with _mac_ indicated that it was a mac80211 callback, but that's no longer true. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: move chain settings to agnJohannes Berg
The core module doesn't need to carry around the code for chain settings that is used for HT drivers (agn) only. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwl3945: use iwl3945_commit_rxonJohannes Berg
There's no need to go via the indirect function call from within the 3945 subdriver. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlwifi: introduce post_scan hookJohannes Berg
The different drivers need to do different things after a scan, so create a post_scan hook to allow them to do this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlagn: rename iwl_commit_rxonJohannes Berg
iwl_commit_rxon really should be named iwlagn_commit_rxon, so rename it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07Merge branch 'wireless-next-2.6' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
2010-10-06iwlagn: add define for MODULE_FIRMWAREWey-Yi Guy
Adding MODULE_FIRMWARE define for 130 series of devices Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlagn: fix module firmware name for 130 series deviceWey-Yi Guy
130 series device should use firmware name with 130 in it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06Revert "iwlwifi: do not perferm force reset while doing scan"Stanislaw Gruszka
This reverts commit 7acc7c683a747689aaaaad4fce1683fc3f85e552. It was applied to avoid possible warning in ieee80211_restart_hw, however reason of the warning were races in mac80211, currently hopefully fixed. Not reseting device when performing scan is bad for two reasons. When forcing reset from iwl_check_stuck_queue(), in case of fail, reset will be repeated until scan finish. But since firmware is in bad shape, scan only finish after scan_check work (about 7s). So we will delay the reset, what is not good behaviour. When forcing reset from iwl_recover_from_statistics(), we will not repeat the reset, so we will not perform reset at all when needed. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06iwlagn: define 130 series of WiFi/BT combo devicesWey-Yi Guy
add new structures and defines need to identify 130 devices. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlagn: rename iwl5000_tx_respWey-Yi Guy
iwl5000_tx_resp really should be iwlagn_tx_resp, rename it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlwifi: remove uncorrect commentsWey-Yi Guy
some structure belong to _agn devices, not just 5000. Fix it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlagn: rename iwl5000_tx_power_dbm_cmdWey-Yi Guy
iwl5000_tx_power_dbm_cmd really should be iwlagn_tx_power_dbm_cmd, so rename it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlagn: reduce redundant parameter definitionsWey-Yi Guy
move paramater definitions to a device paramater structure only leaving the device name, which antennas are used and what firmware file to use in the iwl_cfg structure. this will not completely remove the redundancies but greatly reduce them for devices that only vary by name or antennas. the parameters that are more likely to change within a given device family are left in iwl_cfg. also separate bt param structure added to help reduce more. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlwifi: schedule to deprecate software scan supportWey-Yi Guy
Hardware scan is the prefer method for all iwlwifi devices; especially for dual-mode functions. Schedule to deprecate the software scan support in kernel 2.6.40 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-05iwlwifi: change WARN_ON to IWL_WARN in iwl_mac_add_interfaceStanislaw Gruszka
We can start restarting firmware or RF kill switch can be turned on during call to iwl_mac_add_interface(). That are normal working conditions, so do not print call trace, just print simple message instead. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-20 01:21:36 +0000