summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/iwlwifi/pcie
AgeCommit message (Collapse)Author
2013-12-09iwlwifi: pcie: remove minor dead codeMichal Nazarewicz
inta is checked to be zero in a IRQ_NONE branch so afterwards it cannot be zero as it is never modified. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> [reword the patch title and fix comment] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: mvm: a few more SKUs for 7260 and 3160Emmanuel Grumbach
These devices are not sold as discrete modules but are rather soldered down to the board. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: pcie: remove useless condition testJohannes Berg
After wait_event_timeout(), the condition must still be true if it returns >0, in fact almost the last thing in it is checking the condition again. It's therefore not useful to check yet again in our code, clean it up. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-12-09iwlwifi: remove TX_CMD id from transport layerEmmanuel Grumbach
The transport layer doesn't need to know the TX_CMD id. It can be set by the op_mode. The transport layer still needs to know the layout of the Tx command because of alignment issues and because of the scratch pointer. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-11-25iwlwifi: pcie: stop sending commands to dead firmwareAlexander Bondar
If we call ieee80211_hw_restart, it means that the firmware is in bad condition and will be reset soon. Since the firmware will be reset, there is no good reason to keep sending host commands. Signed-off-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-11-25iwlwifi: add new HW - 7265 seriesOren Givon
Add new HW IDs and configurations for 7265 series. Signed-off-by: Oren Givon <oren.givon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-11-25iwlwifi: pcie: fix interrupt coalescing for 7260 / 3160Emmanuel Grumbach
We changed the timeout for the interrupt coealescing for calibration, but that wasn't effective since we changed that value back before loading the firmware. Since calibrations are notification from firmware and not Rx packets, this doesn't change anyway - the firmware will fire an interrupt straight away regardless of the interrupt coalescing value. Also, a HW issue has been discovered in 7000 devices series. The work around is to disable the new interrupt coalescing timeout feature - do this by setting bit 31 in CSR_INT_COALESCING. This has been fixed in 7265 which means that we can't rely on the device family and must have a hint in the iwl_cfg structure. Cc: stable@vger.kernel.org [3.10+] Fixes: 99cd47142399 ("iwlwifi: add 7000 series device configuration") Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-11-05Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-11-04Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/drv.c
2013-10-29iwlwifi: pcie: move warning message into warningJohannes Berg
Having a WARN_ON() followed by a printed message is less useful than having the message in the warning so move the message. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2013-10-18Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2013-10-11iwlwifi: support Signed firmware image and Dual CPUsEran Harary
Support Signed firmware based on code signing system (CSS) protocol and dual CPUs download, the code recognize if there are more than one CPU and if we need to operate the signed protocol according to the ucode binary image Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-11iwlwifi: Support 7265 devicesEran Harary
7265 is a very similar device to 7260, so just add the definitions based on 7260 for it. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-11iwlwifi: pcie: poke device when commands don't complete quicklyJohannes Berg
In certain corner cases in the firmware implementation, powersave transitions can cause the firmware to miss the fact that commands were added to the queue/FIFO and thus never processes them. Since the commands really are in the queue, try to poke the firmware in such cases (by grabbing NIC access, which wakes up the NIC) so it notices the new command and processes it. Reviewed-by: Alexander Bondar <alexander.bondar@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-11Merge remote-tracking branch 'wireless-next/master' into HEADJohannes Berg
2013-10-11iwlwifi: pcie: restart the driver when a command times outEmmanuel Grumbach
This should really not happen. If it does, restarting is the only way to recover since the driver and the firmware might very well be out of sync. Moreover, iwl_op_mode_nic_error will print data that might help debugging. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-07iwlwifi: pcie: fix merge damageJohannes Berg
The merge b35c8097 seems to have lost commit eabc4ac5d, put the code back. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-02wireless: iwlwifi: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-02iwlwifi: pcie: dump_stack upon timeout of SYNC cmdEmmanuel Grumbach
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-02iwlwifi: pcie: clean RFKILL interrupt in AMPGEmmanuel Grumbach
Newer firmware don't clean the RFKILL interrupt in APMG, do it in driver instead. If we forget to do so, we can't send HCMD to firmware while the NIC is in RFKILL state. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-02iwlwifi: pcie: fix merge damageJohannes Berg
The merge b35c8097 seems to have lost commit eabc4ac5d, put the code back. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-02iwlwifi: pcie: add SKUs for 6000, 6005 and 6235 seriesEmmanuel Grumbach
Add some new PCI IDs to the table for 6000, 6005 and 6235 series. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-02iwlwifi: pcie: add new SKUs for 7000 & 3160 NIC seriesMatti Gottlieb
Add some new PCI IDs to the table for 7000 & 3160 series Cc: stable@vger.kernel.org Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-10-02iwlwifi: pcie: don't reset the TX queue counterEmmanuel Grumbach
A few NICs can get into trouble if we reset the TX queue counters in certain very rare situation. To be on the safe side, simply avoid to reset the TX queue counter. This is relevant for non-AMPDU queues only since on AMPDU we have no choice - we must start the TX queue at the right index. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-28Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/pcie/trans.c net/mac80211/ibss.c
2013-08-16Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-08-16iwlwifi: return -ENOMEM instead of NULL when OOM in iwl_drv_start()Luciano Coelho
The callers of iwl_drv_start() are probe functions. If a probe function returns 0, it means it succeeded. So if NULL was returned by iwl_drv_start(), it would be considered as a success. Fix this by returning -ENOMEM if the driver struct allocation fails in iwl_drv_start(). Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12iwlwifi: pcie: returning positive instead of negativeDan Carpenter
There is a missing '-' character here so we return positive 'ENOMEM' instead of negative. The caller doesn't care. All non-zero returns are translated to '-ENOMEM' in iwl_pcie_nic_init(). This is just a cleanup. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-12iwlwifi: pcie: don't swallow error codes in iwl_trans_pcie_alloc()Luciano Coelho
The iwl_trans_pcie_alloc() function doesn't pass up error codes returned from functions it calls, swallowing them and returning NULL in all failure cases. The caller checks if the return value is NULL and returns -ENOMEM. This is not correct, because in certain cases the failure was not due to an OOM situation. To fix this, modify the iwl_trans_pcie_alloc() function to use ERR_PTR() to return error codes and clean up the error handling code a bit. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-09Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2013-08-09Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2013-08-09iwlwifi: pcie: Remove duplicate code from pcie irq handlersIdo Yariv
Instead of having the same code sequentially, fall-through. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-09iwlwifi: pcie: Refactor iwl_rxq_spaceIdo Yariv
Simplify iwl_rxq_space to improve readability and reduce the ambiguity spares to a single element. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-09iwlwifi: pcie: Refactor iwl_queue_spaceIdo Yariv
Reduce the ambiguity spares to a single element if the window size is not smaller than the queue size. If smaller, no spares are required at all. Signed-off-by: Ido Yariv <ido@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-06iwlwifi: remove transport suspend/resume indirectionJohannes Berg
There's no reason for the transport to call itself through indirect function pointers, inline the (little) code there is and remove the indirection completely. Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-06iwlwifi: pcie: some little cleanupsEliad Peller
do some little cleanups in tx.c - eliminate duplicate checks, use locally cached fields and predefined macros. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-06iwlwifi: fix some documentation typosEliad Peller
Fix some typos. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-06iwlwifi: pcie: fix resume when no opmode is presentJohannes Berg
If no opmode is present during suspend/resume (i.e. if the iwldvm or iwlmvm isn't loaded) the driver crashes during resume, trying to call the rfkill notification. Avoid that, and also don't enable the rfkill interrupt in this case (to avoid crashing trying to handle the interrupt later.) Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-08-06Revert "iwlwifi: pcie: clear RFKILL interrupt in AMPG"Guy Cohen
This reverts commit a53ee0a308b16e392e0219c585b10f329345766b. This fix causes a worse HW Error when entering RF-Kill. Signed-off-by: Guy Cohen <guy.cohen@intel.com> Signed-off-by: Dor Shaish <dor.shaish@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-31iwlwifi: mvm: add high temperature SKU thermal throttling parametersEytan Lifshitz
When the NIC is expected to operate in high temperature, it is advisable to put more aggresive thermal throttling parameters, in order to prevent CT-kill. Signed-off-by: eytan lifshitz <eytan.lifshitz@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-31iwlwifi: pcie: disable L1 Active after pci_enable_deviceEmmanuel Grumbach
As Arjan pointed out, we mustn't do anything related to PCI configuration until the device is properly enabled with pci_enable_device(). Cc: stable@vger.kernel.org Reported-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-26iwlwifi: pcie: clear RFKILL interrupt in AMPGEmmanuel Grumbach
If we forget to do so, we can't send HCMD to firmware while the NIC is in RFKILL state. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-26iwlwifi: pcie: reset the NIC before the bring upEmmanuel Grumbach
This allows to clean all kinds of bad state it might be in. This solves situation where HW RFkill was switched while the NIC was offline. Until now, we relied on the firmware to do clean the interrupt, but new firmwares don't do that any more. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-22iwlwifi: add DELL SKU for 5150 HMCEmmanuel Grumbach
This SKU was missing in the list of supported devices https://bugzilla.kernel.org/show_bug.cgi?id=60577 Cc: <stable@vger.kernel.org> [all versions] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16iwlwifi: pcie: make unused queue warning more readableJohannes Berg
Use the return value of WARN_ONCE() and add a message with the queue ID that's getting used. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-07-16iwlwifi: pcie: don't disable L1 for newest NICsEmmanuel Grumbach
In newest NICs (7000 family and up), L1 is supported, so avoid to disable it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16iwlwifi: remove forward debugfs function declarationsJohannes Berg
There's no need to have 'forward' debugfs function declarations as part of the macros because the macros are always used after the static functions are defined already, so remove them. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-07-16iwlwifi: move dump_fh into common codeInbal Hacohen
This means it can be shared for different transport layers in the future. Signed-off-by: Inbal Hacohen <Inbal.Hacohen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
2013-06-25Merge remote-tracking branch 'wireless-next/master' into iwlwifi-nextJohannes Berg
2013-06-25iwlwifi: always use 'trans_pcie' nameJohannes Berg
A few places use 'pcie_trans' which is a bit non-standard, use 'trans_pcie' there as well. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 18:36:48 +0000