summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/b43legacy
AgeCommit message (Collapse)Author
2009-07-07b43/b43legacy: fix radio LED initializationLarry Finger
Fix condition in which radio LED did not initialize correctly, and remove 4 compilation warnings. After the recent changes in rfkill, the radio LED used by b43/b43legacy did not always initialize correctly. Both b43 and b43legacy used the deprecated variable radio_enabled in struct ieee80211_conf. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-10b43/legacy: port to cfg80211 rfkillJohannes Berg
This ports the b43/legacy rfkill code to the new API offered by cfg80211 and thus removes a lot of useless stuff. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-03rfkill: rewriteJohannes Berg
This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20b43/legacy: fix beacon change processingJohannes Berg
Process beacon change even if the BSSID doesn't change at the same time. Also fix what I think is a small locking error in b43legacy, there's a spin_unlock_irqrestore that looks out of place. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20b43legacy: Remove unnecessary MMIO in interrupt hotpathStefano Brivio
This removes unnecessary MMIO accesses in the interrupt hotpath. The patch by Michael Buesch for b43 has been ported to b43legacy. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-06mac80211: unify config_interface and bss_info_changedJohannes Berg
The config_interface method is a little strange, it contains the BSSID and beacon updates, while bss_info_changed contains most other BSS information for each interface. This patch removes config_interface and rolls all the information it previously passed to drivers into bss_info_changed. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-06mac80211: clean up beacon interval settingsJohannes Berg
We currently have two beacon interval configuration knobs: hw.conf.beacon_int and vif.bss_info.beacon_int. This is rather confusing, even though the former is used when we beacon ourselves and the latter when we are associated to an AP. This just deprecates the hw.conf.beacon_int setting in favour of always using vif.bss_info.beacon_int. Since it touches all the beaconing IBSS code anyway, we can also add support for the cfg80211 IBSS beacon interval configuration easily. NOTE: The hw.conf.beacon_int setting is retained for now due to drivers still using it -- I couldn't untangle all drivers, some are updated in this patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22b43legacy: Clean up beacon IRQLarry Finger
This patch ports commit c97a4ccc1fad35d3 "b43: Fix beacon BH update" to b43legacy. It fixes beacon updating in the bottomhalf. In case the device is busy, we will defer to later in the IRQ handler. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Michael Buesch <mb@bu3sch.de> Tested-by: David Ellingsworth <david@identd.dyndns.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22b43legacy: Fixes for beaconingLarry Finger
This patch ports the beaconing fixes from commit a82d992261f "b43: Beaconing fixes" to b43legacy. Basically it prevents the card from triggering the beacon IRQ over and over again. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Michael Buesch <mb@bu3sch.de> Tested-by: David Ellingsworth <david@identd.dyndns.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22b43legacy: Do not select HW_RANDOMLarry Finger
Auto-depend on HW_RANDOM, rather than "select"ing it. This way the user has the choice to enable or disable HWRNG support. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-22rfkill: remove user_claim stuffJohannes Berg
Almost all drivers do not support user_claim, so remove it completely and always report -EOPNOTSUPP to userspace. Since userspace cannot really drive rfkill _anyway_ (due to the odd restrictions imposed by the documentation) having this code is just pointless. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-07dma-mapping: replace all DMA_30BIT_MASK macro with DMA_BIT_MASK(30)Yang Hongyang
Replace all DMA_30BIT_MASK macro with DMA_BIT_MASK(30) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-09b43legacy: fix led namingDanny Kukawka
Fixed led device naming for the b43legacy driver. Due to the documentation of the led subsystem/class the naming should be "devicename:colour:function" while not applying sections should be left blank. This should lead to e.g. "b43legacy-%s::rx" instead of "b43legacy-%s:rx". Signed-off-by: Danny Kukawka <dkukawka@suse.de> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-29wireless: restrict to 32 legacy ratesJohannes Berg
Since the standards only define 12 legacy rates, 32 is certainly a sane upper limit and we don't need to use u64 everywhere. Add sanity checking that no more than 32 rates are registered and change the variables to u32 throughout. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-13b43legacy: fix "‘up_dev’ may be used uninitialized" warningJohn W. Linville
drivers/net/wireless/b43legacy/main.c: In function ‘b43legacy_op_dev_config’: drivers/net/wireless/b43legacy/main.c:2468: warning: ‘up_dev’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-12b43legacy: Fix sparse warningsLarry Finger
Sparse yields the following warnings for b43legacy: CHECK drivers/net/wireless/b43legacy/phy.c drivers/net/wireless/b43legacy/phy.c:1304:31: warning: potentially expensive pointer subtraction drivers/net/wireless/b43legacy/phy.c:1304:31: warning: potentially expensive pointer subtraction drivers/net/wireless/b43legacy/phy.c:1304:31: warning: potentially expensive pointer subtraction CHECK drivers/net/wireless/b43legacy/debugfs.c drivers/net/wireless/b43legacy/debugfs.c:243:9: warning: memset with byte count of 131072 Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-21b43legacy: implement short slot and basic rate handlingJohannes Berg
This implements proper short slot handling and adds code to program the hardware for the correct response rates derived from the basic rate set for the current BSS. (port from b43) Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10b43legacy: reindent misleading statementIlpo Järvinen
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10b43/legacy: remove SSID codeJohannes Berg
The SSID programmed into the device is used by the ucode only to reply to probe requests, a functionality we disable anyway because it doesn't fit with the mac80211/hostapd programming model. Therefore, it isn't useful to program the SSID into device. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211/drivers: rewrite the rate control APIJohannes Berg
So after the previous changes we were still unhappy with how convoluted the API is and decided to make things simpler for everybody. This completely changes the rate control API, now taking into account 802.11n with MCS rates and more control, most drivers don't support that though. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: make retry limits part of hw configJohannes Berg
Instead of having a separate callback, use the HW config callback with a new flag to change retry limits. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: introduce hw config change flagsJohannes Berg
This makes mac80211 notify the driver which configuration actually changed, e.g. channel etc. No driver changes, this is just plumbing, driver authors are expected to act on this if they want to. Also remove the HW CONFIG debug printk, it's incorrect, often we configure something else. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31mac80211: kill hw.conf.antenna_sel_{rx,tx}Johannes Berg
Never actually used. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-06mac80211: add multi-rate retry supportFelix Fietkau
This patch adjusts the rate control API to allow multi-rate retry if supported by the driver. The ieee80211_hw struct specifies how many alternate rate selections the driver supports. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-06mac80211: free up 2 bytes in skb->cbFelix Fietkau
Free up 2 bytes in skb->cb to be used for multi-rate retry later. Move iv_len and icv_len initialization into key alloc. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-01Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath9k/core.c drivers/net/wireless/ath9k/main.c net/core/dev.c
2008-09-16Revert "b43/b43legacy: add RFKILL_STATE_HARD_BLOCKED support"Linus Torvalds
This reverts commit bc19d6e0b74ef03a3baf035412c95192b54dfc6f, which as Larry Finger reports causes the radio LED on his system to no longer respond to rfkill switch events. Reported-by: Larry Finger <Larry.Finger@lwfinger.net> Requested-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-09-15mac80211: share STA information with driverJohannes Berg
This patch changes mac80211 to share some more data about stations with drivers. Should help iwlwifi and ath9k when they get around to updating, and might also help with implementing rate control algorithms without internals. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Cc: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-15mac80211: use nl80211 interface typesJohannes Berg
There's really no reason for mac80211 to be using its own interface type defines. Use the nl80211 types and simplify the configuration code a bit: there's no need to translate them any more now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11b43legacy: Fix to enhance TX speedEhud Gavron
Recent changes in the specifications have improved the performance of the BCM4306/2 devices that use b43legacy as the driver. These "errors" in the specs have been present from the very first implementation of bcm43xx. Signed-off-by: Ehud Gavron <gavron@wetwork.net> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-11b43legacy: Fix failure in rate-adjustment mechanismLarry Finger
A coding error present since b43legacy was incorporated into the kernel has prevented the driver from using the rate-setting mechanism of mac80211. The driver has been forced to remain at a 1 Mb/s rate. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> [2.6.26], [2.6.25] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05cfg80211: keep track of supported interface modesLuis R. Rodriguez
It is obviously good for userspace to know up front which interface modes a given piece of hardware might support (even if adding such an interface might fail later because of concurrency issues), so let's make cfg80211 aware of that. For good measure, disallow adding interfaces in all other modes so drivers don't forget to announce support for one mode when they add it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Stephen Blackheath <tramp.enshrine.stephen@blacksapphire.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-29wireless: remove unused #include <version.h>Huang Weiyi
The driver(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/net/wireless/b43legacy/main.c drivers/net/wireless/iwlwifi/iwl-3945-led.c drivers/net/wireless/iwlwifi/iwl-led.c drivers/net/wireless/iwlwifi/iwl-rfkill.c This patch removes the said #include <version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-23removed unused #include <linux/version.h>'sAdrian Bunk
This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-22b43legacy: use le16 frame control directly, avoid byteswappingHarvey Harrison
Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29mac80211: partially fix skb->cb useJohannes Berg
This patch fixes mac80211 to not use the skb->cb over the queue step from virtual interfaces to the master. The patch also, for now, disables aggregation because that would still require requeuing, will fix that in a separate patch. There are two other places (software requeue and powersaving stations) where requeue can happen, but that is not currently used by any drivers/not possible to use respectively. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29b43legacy: Release mutex in error handling codeJulia Lawall
The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29mac80211: remove IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE flagJohannes Berg
I forgot this in the previous patch that made it unused. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: fix TX sequence numbersJohannes Berg
This patch makes mac80211 assign proper sequence numbers to QoS-data frames. It also removes the old sequence number code because we noticed that only the driver or hardware can assign sequence numbers to non-QoS-data and especially management frames in a race-free manner because beacons aren't passed through mac80211's TX path. This patch also adds temporary code to the rt2x00 drivers to not break them completely, that code will have to be reworked for proper sequence numbers on beacons. It also moves sequence number assignment down in the TX path so no sequence numbers are assigned to frames that are dropped. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-14mac80211: revamp beacon configurationJohannes Berg
This patch changes mac80211's beacon configuration handling to never pass skbs to the driver directly but rather always require the driver to use ieee80211_beacon_get(). Additionally, it introduces "change flags" on the config_interface() call to enable drivers to figure out what is changing. Finally, it removes the beacon_update() driver callback in favour of having IBSS beacon delivered by ieee80211_beacon_get() as well. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-08b43legacy: Remove switch statement with 64-bit indexLarry Finger
The gcc 3.4 fork used to compile the MN10300 port emits unwanted __ucmpdi2() calls for switch statements that use a 64bit value. This patch removes such a switch from b43legacy, and makes the code more like that used in b43. Thanks to Adrian Bunk <bunk@kernel.org> for reporting the problem. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-30b43/b43legacy: add RFKILL_STATE_HARD_BLOCKED supportAdel Gadllah
This patch sets the rfkill state to RFKILL_STATE_HARD_BLOCKED when the radio is killed by the hardware switch. Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-30b43/b43legacy: use RFKILL_STATE_UNBLOCKED instead of RFKILL_STATE_ONAdel Gadllah
This patch removes the usage RFKILL_STATE_ON and uses RFKILL_STATE_UNBLOCKED instead. Signed-off-by: Adel Gadllah <adel.gadllah@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-28Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-06-28Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl4965-base.c
2008-06-27wireless: remove RFKILL_STATE_HARD_BLOCKED warningsJohn W. Linville
CC [M] drivers/net/wireless/b43/rfkill.o drivers/net/wireless/b43/rfkill.c: In function ‘b43_rfkill_soft_toggle’: drivers/net/wireless/b43/rfkill.c:90: warning: enumeration value ‘RFKILL_STATE_HARD_BLOCKED’ not handled in switch CC [M] drivers/net/wireless/b43legacy/rfkill.o drivers/net/wireless/b43legacy/rfkill.c: In function ‘b43legacy_rfkill_soft_toggle’: drivers/net/wireless/b43legacy/rfkill.c:92: warning: enumeration value ‘RFKILL_STATE_HARD_BLOCKED’ not handled in switch CC [M] drivers/net/wireless/iwlwifi/iwl-rfkill.o drivers/net/wireless/iwlwifi/iwl-rfkill.c: In function ‘iwl_rfkill_soft_rf_kill’: drivers/net/wireless/iwlwifi/iwl-rfkill.c:56: warning: enumeration value ‘RFKILL_STATE_HARD_BLOCKED’ not handled in switch Also handle RFKILL_STATE_{ON,OFF} -> RFKILL_STATE_{UNBLOCKED,SOFT_BLOCKED} conversion since I'm already here... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-27ssb, b43, b43legacy, b44: Rewrite SSB DMA APIMichael Buesch
This is a rewrite of the DMA API for SSB devices. This is needed, because the old (non-existing) "API" made too many bad assumptions on the API of the host-bus (PCI). This introduces an almost complete SSB-DMA-API that maps to the lowlevel bus-API based on the bustype. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-26b43legacy: use frame control helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 15:38:08 +0000