summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/b43
AgeCommit message (Collapse)Author
2009-10-27b43/legacy: Fix usage of host_pci pointerMichael Buesch
We must check the bustype before using the host_pci pointer. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-13Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-10-12b43: fix ieee80211_rx() contextJohannes Berg
Due to the way it interacts with the networking stack and other parts of mac80211, ieee80211_rx() must be called with disabled softirqs. [1] http://thread.gmane.org/gmane.linux.kernel.wireless.general/39440/focus=40266 Reported-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-11Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-10-07b43: Comment unused functions lpphy_restore_dig_flt_state and ↵Jaswinder Singh Rajput
lpphy_disable_rx_gain_override Commenting unused functions lpphy_restore_dig_flt_state and lpphy_disable_rx_gain_override, may be we need these functions in future. This also fixed following compilation warnings : CC [M] drivers/net/wireless/b43/phy_lp.o drivers/net/wireless/b43/phy_lp.c:383: warning: ‘lpphy_restore_dig_flt_state’ defined but not used drivers/net/wireless/b43/phy_lp.c:891: warning: ‘lpphy_disable_rx_gain_override’ defined but not used Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07b43: do not stack-allocate pio rx/tx header and tail buffersAlbert Herranz
The DMA-API debugging facility complains about b43 mapping memory from stack for SDIO-based cards. Indeed, b43 currently allocates the PIO RX/TX header and tail buffers from stack. The solution here is to use heap-allocated buffers instead. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07b43: Fix PPC crash in rfkill polling on unloadLarry Finger
In Bugzilla No. 14181, a PowerMac G4 crashes on ifdown or module unload because the rfkill polling has not been stopped. For the x86 architectures, the attempt to reach a now unmapped register is not fatal as it is on PPC. (Includes "b43: Fix locking problem when stopping rfkill polling". -- JWL) Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07b43: Protect sanity check against physical device removalMichael Buesch
Fix IRQ mask sanity check for physically pulled device. Tested-by: Andrew Price <andy@andrewprice.me.uk> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07b43: Don't use struct wldev after detach.Michael Buesch
Don't use struct wldev after detach. This fixes an oops on access. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-29b43: Always use block-I/O for the PIO data registersMichael Buesch
On SDIO the PIO data register seems to be hardwired to LE. So the MACCTL bit has no effect on the endianness. So also use block-I/O for the last word of the packet. block-I/O is always LE. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-rx.c
2009-09-23b43: Implement RFKILL status for LP PHYLarry Finger
The LP (and probably N) PHY has the same radio disabled bit as the higher-revision A and G PHYs. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Remove BROKEN attribute from SDIOMichael Buesch
SDIO works (more or less), so remove the BROKEN dependency and let people test it. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: fix build error if !CONFIG_B43_LEDSAlbert Herranz
Fix the following build error when CONFIG_B43_LEDS is not selected: drivers/net/wireless/b43/main.c: In function 'b43_remove': drivers/net/wireless/b43/main.c:4990: error: 'struct b43_leds' has no member named 'stop' drivers/net/wireless/b43/main.c:4991: error: 'struct b43_leds' has no member named 'work' make[4]: *** [drivers/net/wireless/b43/main.o] Error 1 Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Don't abuse wl->current_dev in the led workMichael Buesch
Don't abuse wl->current_dev in the LED work for checking whether we're going down. Add an explicit variable. This fixes a crash on rmmod dereferencing the wl->current_dev NULL pointer in various other places of the driver. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Add LP PHY Analog Switch SupportThomas Ilnseher
The current verison of b43 uses "b43_phyop_switch_analog_generic" for A, G and LP phys. According to the spec, this is the wrong behaviour for the LP PHY (see: http://bcm-v4.sipsolutions.net/802.11/PHY/Anacore ) While no problems on the x86 plattform where seen, this leads to a crash on the BCM5354 SoC (MIPS 32 LE plattform). This patch implements the analog switch for LP PHYs according to the specs. It fixes the crash signed-off-by: Thomas Ilnseher <illth@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Disable PMQ mechanismMichael Buesch
This reduces IRQ pressure by about one third on a saturated link by disabling the PMQ mechanism. We currently don't use that mechanism. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Add optional verbose runtime statisticsMichael Buesch
This adds support for verbose runtime statistics. It defaults to off and must be enabled in debugfs, if desired. The first measurement may be incorrect, because statistics are not cleared after they got enabled through debugfs. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Fix IRQ sync for SDIOMichael Buesch
synchronize_irq is meaningless for SDIO. sdio_release_irq will sync the IRQ thread for us. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Fix SDIO interrupt handler deadlockMichael Buesch
We need to release the SDIO host before locking the driver mutex. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Do not use _irqsafe callbacksMichael Buesch
We don't need to call the irqsafe callbacks. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Add Soft-MAC SDIO device supportAlbert Herranz
This adds support for Soft-MAC SDIO devices to b43. The driver still lacks some fixes for SDIO devices, so it's currently marked as BROKEN. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Rewrite suspend/resume codeMichael Buesch
This removes most of the b43 suspend/resume code (it's handled by mac80211) and moves the registration of devices to the attachment phase. This is required, because we must not register/unregister devices on suspend/resume. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Fix resume failureMichael Buesch
This fixes a resume failure where a signal is pending on resume so the firmware upload fails. This removes the interruptible sleep, because we don't really need it. In the worst case (with broken firmware) the sleep loop will take 1 second. In the common case (working firmware), it will only take a few milliseconds. So we don't really need to be interruptible. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Force-wake queues on initMichael Buesch
Force wake the mac80211 queues on init. Under rare circumstances they may be stopped, if a DMA error or something else causes a device reset while a queue was stopped. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14b43: Fix resume failureMichael Buesch
This fixes a resume failure where a signal is pending on resume so the firmware upload fails. This removes the interruptible sleep, because we don't really need it. In the worst case (with broken firmware) the sleep loop will take 1 second. In the common case (working firmware), it will only take a few milliseconds. So we don't really need to be interruptible. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-14b43: Force-wake queues on initMichael Buesch
Force wake the mac80211 queues on init. Under rare circumstances they may be stopped, if a DMA error or something else causes a device reset while a queue was stopped. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09b44/b43/b43legacy: Fix switch warnings introduced by SSB-SDIOMichael Buesch
This fixes some gcc warnings for switch statements. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09b43: Fix sparse warning in hw-tkip codeMichael Buesch
This fixes a sparse warning in the hardware-TKIP code: drivers/net/wireless/b43/xmit.c:272:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/b43/xmit.c:272:18: expected unsigned short [unsigned] [short] <noident> drivers/net/wireless/b43/xmit.c:272:18: got restricted unsigned short [usertype] <noident> The code should work correctly with and without this patch applied. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-09b43: Really disable QoS, if requestedMichael Buesch
Currently, when QoS-disable is requested, we would leave QoS enabled in firmware, but only queue frames on one queue. Change that and also tell firmware about disabled QoS, so it completely ignores all the QoS parameters. Also don't upload the parameters, if QoS is disabled. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08b43: PCMCIA is not experimental anymoreMichael Buesch
PCMCIA support works well and is not experimental anymore. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08b43: remove SHM spinlockMichael Buesch
This removes the SHM spinlock. SHM is protected by wl->mutex. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08b43: Remove PIO RX workqueueMichael Buesch
This removes the PIO RX work. It's not needed anymore, because we can sleep in the threaded interrupt handler. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08b43: Remove DMA/PIO queue locksMichael Buesch
This removes the DMA/PIO queue locks. Locking is handled by wl->mutex now. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08b43: Remove TX spinlockMichael Buesch
This removes the TX spinlock and defers TX to a workqueue to allow locking wl->mutex instead and to allow sleeping for register accesses. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-08b43: Use a threaded IRQ handlerMichael Buesch
Use a threaded IRQ handler to allow locking the mutex and sleeping while executing an interrupt. This removes usage of the irq_lock spinlock, but introduces a new hardirq_lock, which is _only_ used for the PCI/SSB lowlevel hard-irq handler. Sleeping busses (SDIO) will use mutex instead. Signed-off-by: Michael Buesch <mb@bu3sch.de> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-31b43: LP-PHY: Fix TX gain tablesGábor Stefanik
The rev1 2GHz and rev2 5GHz gain tables were incorrectly documented on the specs originally. Update these gaintables to match the cor- rected specs. Signed-off-by: Gábor Stefanik <netroller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-31b43: Fix typo in modparam_btcoex descriptionGábor Stefanik
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-31b43: Add myself to module authors & to LP-PHY file copyright noticesGábor Stefanik
Also mark the LP-PHY driver "802.11a/g" instead of "802.11g", as LP-PHY is capable of both 2GHz and 5GHz operation. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-31b43: Refactor and update antenna diversity for A/G-PHYGábor Stefanik
-Make use of the b43_phy_set/mask/maskset helpers. -Fix a few errors in the code. -Make the code more readable. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28b43: Implement antenna diversity support for LP-PHYGábor Stefanik
The A/G-PHY changes are fallout fixes from the enum change, which in turn allows the LP-PHY code to be much simpler. The antenna_to_phyctl change is a fix for a potential existing bug that this patch may otherwise trigger. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28b43: Enable LP-PHY support by default and remove Kconfig warningGábor Stefanik
The most common LP-PHY device, BCM4312, is now fully functional. So, no need to say "probably won't work for you" anymore. It's also not "for debuggers and developers only", as it is perfectly usable for end-users now (at least for BCM4312). Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28b43: LP-PHY: Revert to the original PHY register write routineGábor Stefanik
After some discussion on IRC about the PHY register write change, I am not sure anymore if this is the right thing to do. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28ssb: Implement PMU LDO control and use it in b43Gábor Stefanik
Implement the "PMU LDO set voltage" and "PMU LDO PA ref enable" functions, and use them during LP-PHY baseband init in b43. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28b43: Fix and update LP-PHY codeGábor Stefanik
-Fix a few nasty typos (b43_phy_* operations instead of b43_radio_*) in the channel tune routines. -Fix some typos & spec errors found by MMIO tracing. -Optimize b43_phy_write & b43_phy_mask/set/maskset to use only the minimal number of MMIO accesses. (Write is possible using a single 32-bit MMIO write, while set/mask/maskset can be done in 3 16-bit MMIOs). -Set the default channel back to 1, as the bug forcing us to use channel 7 is now fixed. With this, the device comes up, scans, associates, transmits, receives, monitors and injects on all channels - in other words, it's fully functional. Sensitivity and TX power are still sub-optimal, due to the lack of calibration (that's next on my list). Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28b43: LP-PHY: Fix and simplify Qdiv roundupGábor Stefanik
The Qdiv roundup routine is essentially a fixed-point division algorithm, using only integer math. However, the version in the specs had a major error that has been recently fixed (a missing quotient++). Replace Qdiv roundup with a rewritten, simplified version. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-28b43: LP-PHY: Fix a few typos in the RC calibration codeGábor Stefanik
The RC calibration code has some typos - fix them. Also, make the default channel 7, as channel 1 is still broken (only channels 7 and 8, and occasionally 9 work). Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: add hardware tkipgregor kowski
This add hardware tkip for b43. Signed-off-by: Gregor Kowski <gregor.kowski@gmail.com> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Implement spec updates and remove resolved FIXMEsGábor Stefanik
Larry has started re-checking all current routines against a new version of the Broadcom MIPS driver. This patch implements the first round of changes he documented on the specs wiki. Also remove a few FIXMEs regarding missing initial values for variables with dynamic initial values where reading the values has been implemented. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20b43: LP-PHY: Two small spec updatesGábor Stefanik
The specs are beginning to support rev3 LP-PHYs - implement one of the changes needed for rev3 support. Also, in the new MIPS driver, the "Japan TX filter" was renamed to "analog TX filter init" - however, calling it "init" is confusing, so name it "set analog filter", with a comment for easier future identification. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 00:31:53 +0000