summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/b43/phy_lcn.c
AgeCommit message (Collapse)Author
2014-08-25b43: flush some writes on Broadcom MIPS SoCsRafał Miłecki
Access to PHY and radio registers is indirect on Broadcom hardware and it seems that addressing on some MIPS SoCs may require flushing. So far this problem was noticed on 0x4716 SoC only (marketing names: BCM4717, BCM4718). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-25b43: don't duplicate common PHY read/write opsRafał Miłecki
Most of the PHYs use the same way of accessing registers, so move that code to the shared place. An exception is G-PHY which sometimes access A-PHY regs and requires special handling. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18b43: use one shared function for setting MAC frequencyRafał Miłecki
By the way add few chipsets that were tracked with "wl" dumps. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25mac80211: Use a cfg80211_chan_def in ieee80211_hw_conf_chanKarl Beldan
Drivers that don't use chanctxes cannot perform VHT association because they still use a "backward compatibility" pair of {ieee80211_channel, nl80211_channel_type} in ieee80211_conf and ieee80211_local. Signed-off-by: Karl Beldan <karl.beldan@rivierawaves.com> [fix kernel-doc] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-09-27b43: LCN-PHY: minor clean upsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19b43: LCN-PHY: finish sense setupRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19b43: LCN-PHY: add more init tweaksRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19b43: LCN-PHY: init TX power controlRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19b43: LCN-PHY: implement SPUR avoidance modeRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19b43: LCN-PHY: set TX filtersRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-19b43: LCN-PHY: tweaks for channel switchingRafał Miłecki
They have been taken from brcmsmac, add Broadcom's copyright. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-14b43: add my copyrights and myself as the module authorRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13b43: LCN-PHY: add conditions for few operationsRafał Miłecki
It was not possible to guess the conditions from MMIO dumps. Take them from brcmsmac code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13b43: LCN-PHY: rename functions, get rid of magic namesRafał Miłecki
We've compared b43 with brcmsmac and took functions names from the later. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13b43: LCN-PHY: put tables functions in correct fileRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13b43: LCN-PHY: implement saving and restoring PHY & radio configurationRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13b43: LCN-PHY: prepare functions for channel switchingRafał Miłecki
Switching is not fully implemented yet, prepare place for the code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13b43: LCN-PHY: implement more PHY ops before radio initRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-13b43: LCN-PHY: add R/W ops for PHY and radioRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43: LCN-PHY: init 0x2064 radioRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43: LCN-PHY: basic PHY initRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43: LCN-PHY: switch analogRafał Miłecki
Analog is switched on right after reading PHY version: read16 0xfaafc3e0 -> 0xa801 phy_read(0x043b) -> 0x0000 phy_write(0x043b) <- 0x0000 Switched off after after killing radio: >>> Switch Radio(OFF) end phy_read(0x043c) -> 0x0000 phy_write(0x043c) <- 0x0007 phy_read(0x043b) -> 0x0000 phy_write(0x043b) <- 0x0007 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43: LCN-PHY: implement disabling radioRafał Miłecki
wl reads radio version, then disables it. That's how we found it in MMIO dump: radio_read(0x0000) -> 0x0031 <-- RADIO READ WITHOUT 0x200 SET! radio_read(0x0001) -> 0x0064 <-- RADIO READ WITHOUT 0x200 SET! radio_read(0x0002) -> 0x0020 <-- RADIO READ WITHOUT 0x200 SET! read32 0xfaafc120 -> 0x04000400 phy_read(0x044d) -> 0x0000 phy_write(0x044d) <- 0x0000 phy_read(0x044c) -> 0x1fff phy_write(0x044c) <- 0x1fff phy_read(0x04b7) -> 0x0000 phy_write(0x04b7) <- 0x0000 phy_read(0x04b1) -> 0x0000 phy_write(0x04b1) <- 0x0000 phy_read(0x04b0) -> 0x7dff phy_write(0x04b0) <- 0x7dff phy_read(0x04fa) -> 0x0000 phy_write(0x04fa) <- 0x0000 phy_read(0x04f9) -> 0x007f phy_write(0x04f9) <- 0x007f Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-24b43: LCN-PHY: add very basic PHY opsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-08b43: LCN-PHY add place for new PHY supportRafał Miłecki
LCN-PHY was found in 14e4:4727 card. It uses LCN/1 and 0x2064/1 radio. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-13 23:19:52 +0000