summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath5k
AgeCommit message (Collapse)Author
2017-05-19Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for 4.13. Major changes: ath10k * add initial SDIO support (still work in progress)
2017-05-19ath5k: fix memory leak on buf on failed eeprom readColin Ian King
The AR5K_EEPROM_READ macro returns with -EIO if a read error occurs causing a memory leak on the allocated buffer buf. Fix this by explicitly calling ath5k_hw_nvram_read and exiting on the via the freebuf label that performs the necessary free'ing of buf when a read error occurs. Detected by CoverityScan, CID#1248782 ("Resource Leak") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-28mac80211: separate encoding/bandwidth from flagsJohannes Berg
We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: clean up rate encoding bits in RX statusJohannes Berg
In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06wireless: Set NL80211_EXT_FEATURE_CQM_RSSI_LIST in multiple driversAndrew Zaborowski
Set the NL80211_EXT_FEATURE_CQM_RSSI_LIST wiphy extended feature wholesale in all mac80211-based drivers that do not set the IEEE80211_VIF_BEACON_FILTER flags on their interfaces. mac80211 will be processing supplied RSSI values in ieee80211_rx_mgmt_beacon and will detect when the thresholds set by ieee80211_set_cqm_rssi_range_config are crossed. Remaining (few) drivers need code to enable the firmware to monitor the thresholds. This is mostly only compile-tested. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-02average: change to declare precision, not factorJohannes Berg
Declaring the factor is counter-intuitive, and people are prone to using small(-ish) values even when that makes no sense. Change the DECLARE_EWMA() macro to take the fractional precision, in bits, rather than a factor, and update all users. While at it, add some more documentation. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-10net: ath5k: fix build errors when linux/phy*.h is removed from net/dsa.hRussell King
Fix these errors reported by the 0-day builder by replacing the linux/export.h include with linux/module.h. In file included from include/linux/platform_device.h:14:0, from drivers/net/wireless/ath/ath5k/ahb.c:20: include/linux/device.h:1463:1: warning: data definition has no type or storage class module_init(__driver##_init); \ ^ include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver' module_driver(__platform_driver, platform_driver_register, \ ^~~~~~~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(ath_ahb_driver); ^~~~~~~~~~~~~~~~~~~~~~ include/linux/device.h:1463:1: error: type defaults to 'int' in declaration of 'module_init' [-Werror=implicit-int] module_init(__driver##_init); \ ^ include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver' module_driver(__platform_driver, platform_driver_register, \ ^~~~~~~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(ath_ahb_driver); ^~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:1: warning: parameter names (without types) in function declaration In file included from include/linux/platform_device.h:14:0, from drivers/net/wireless/ath/ath5k/ahb.c:20: include/linux/device.h:1468:1: warning: data definition has no type or storage class module_exit(__driver##_exit); ^ include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver' module_driver(__platform_driver, platform_driver_register, \ ^~~~~~~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(ath_ahb_driver); ^~~~~~~~~~~~~~~~~~~~~~ include/linux/device.h:1468:1: error: type defaults to 'int' in declaration of 'module_exit' [-Werror=implicit-int] module_exit(__driver##_exit); ^ include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver' module_driver(__platform_driver, platform_driver_register, \ ^~~~~~~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(ath_ahb_driver); ^~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:1: warning: parameter names (without types) in function declaration In file included from include/linux/platform_device.h:14:0, from drivers/net/wireless/ath/ath5k/ahb.c:20: drivers/net/wireless/ath/ath5k/ahb.c:233:24: warning: 'ath_ahb_driver_exit' defined but not used [-Wunused-function] module_platform_driver(ath_ahb_driver); ^ include/linux/device.h:1464:20: note: in definition of macro 'module_driver' static void __exit __driver##_exit(void) \ ^~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(ath_ahb_driver); ^~~~~~~~~~~~~~~~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:24: warning: 'ath_ahb_driver_init' defined but not used [-Wunused-function] module_platform_driver(ath_ahb_driver); ^ include/linux/device.h:1459:19: note: in definition of macro 'module_driver' static int __init __driver##_init(void) \ ^~~~~~~~ drivers/net/wireless/ath/ath5k/ahb.c:233:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(ath_ahb_driver); ^~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-12ath5k: drop bogus warning on drv_set_key with unsupported cipherFelix Fietkau
Simply return -EOPNOTSUPP instead. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-12-01ath5k: drop duplicate header vmalloc.hGeliang Tang
Drop duplicate header vmalloc.h from ath5k/debug.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-09-03ath5k: fix EEPROM dumping via debugfsSergey Ryazanov
EEPROM size calculated in 16-bit words, so we should take into account this fact during buffer allocation. CC: Jiri Slaby <jirislaby@gmail.com> CC: Nick Kossifidis <mickflemm@gmail.com> CC: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-06-14ath5k: fix misplaced default label in sifs switchBob Copeland
In this switch statement, the default case does not always assign sifs. In practice, ah->ah_bwmode cannot take values besides the other labels, so this is not an actual problem, but it looks odd and smatch complains thus: ath5k_hw_get_default_sifs() warn: missing break? reassigning 'sifs' Silence the warning by moving default label up a line. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-04ath5k: Change led pin configuration for compaq c700 laptopJoseph Salisbury
BugLink: http://bugs.launchpad.net/bugs/972604 Commit 09c9bae26b0d3c9472cb6ae45010460a2cee8b8d ("ath5k: add led pin configuration for compaq c700 laptop") added a pin configuration for the Compaq c700 laptop. However, the polarity of the led pin is reversed. It should be red for wifi off and blue for wifi on, but it is the opposite. This bug was reported in the following bug report: http://pad.lv/972604 Fixes: 09c9bae26b0d3c9472cb6ae45010460a2cee8b8d ("ath5k: add led pin configuration for compaq c700 laptop") Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-03-11ath5k: fix incorrect indentationBob Copeland
smatch said: drivers/net/wireless/ath/ath5k/phy.c:1449 ath5k_hw_channel() warn: inconsistent indenting drivers/net/wireless/ath/ath5k/reset.c:637 ath5k_hw_on_hold() warn: inconsistent indenting drivers/net/wireless/ath/ath5k/reset.c:702 ath5k_hw_nic_wakeup() warn: inconsistent indenting All of these lines were indented a tabstop too far. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-12-08ath5k: fix RTS/CTS by using proper rate flagsBob Copeland
The rates in the tx control rateset do not have the protection flags applied, so RTS/CTS would never get enabled if requested. Fix by using the rate flags in the rates returned by ieee80211_get_tx_rates(). Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-04debugfs: Pass bool pointer to debugfs_create_bool()Viresh Kumar
Its a bit odd that debugfs_create_bool() takes 'u32 *' as an argument, when all it needs is a boolean pointer. It would be better to update this API to make it accept 'bool *' instead, as that will make it more consistent and often more convenient. Over that bool takes just a byte. That required updates to all user sites as well, in the same commit updating the API. regmap core was also using debugfs_{read|write}_file_bool(), directly and variable types were updated for that to be bool as well. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-20ath5k: use DECLARE_EWMAJohannes Berg
This reduces code size slightly (at least on x86/64) while also removing memory consumption by two unsigned long values for each ath5k device. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10mac80211: convert HW flags to unsigned long bitmapJohannes Berg
As we're running out of hardware capability flags pretty quickly, convert them to use the regular test_bit() style unsigned long bitmaps. This introduces a number of helper functions/macros to set and to test the bits, along with new debugfs code. The occurrences of an explicit __clear_bit() are intentional, the drivers were never supposed to change their supported bits on the fly. We should investigate changing this to be a per-frame flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-06mac80211: extend get_tkip_seq to all keysJohannes Berg
Extend the function to read the TKIP IV32/IV16 to read the IV/PN for all ciphers in order to allow drivers with full hardware crypto to properly support this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-05mac80211: make LED trigger names constJohannes Berg
This is just a code cleanup, make the LED trigger names const as they're not expected to be modified by drivers. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24mac80211: remove support for IFF_PROMISCJohannes Berg
This support is essentially useless as typically networks are encrypted, frames will be filtered by hardware, and rate scaling will be done with the intended recipient in mind. For real monitoring of the network, the monitor mode support should be used instead. Removing it removes a lot of corner cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-13ath5k: fix reset raceSergey Ryazanov
To prepare for reset ath5k should finish all asynchronous tasks. At first, it disables the interrupt generation, then it waits for the interrupt handler and tasklets completion, and then proceeds to the HW configuration update. But it does not consider that the interrupt handler or tasklet re-enables the interrupt generation. And we fall in a situation when ath5k assumes that interrupts are disabled, but it is not. This can lead to different consequences, such as reception of the frame, when we do not expect it. Under certain circumstances, this can lead to the following warning: WARNING: at ath5k/base.c:589 ath5k_tasklet_rx+0x318/0x6ec [ath5k]() invalid hw_rix: 1a [..] Call Trace: [<802656a8>] show_stack+0x48/0x70 [<802dd92c>] warn_slowpath_common+0x88/0xbc [<802dd98c>] warn_slowpath_fmt+0x2c/0x38 [<81b51be8>] ath5k_tasklet_rx+0x318/0x6ec [ath5k] [<8028ac64>] tasklet_action+0x8c/0xf0 [<80075804>] __do_softirq+0x180/0x32c [<80196ce8>] irq_exit+0x54/0x70 [<80041848>] ret_from_irq+0x0/0x4 [<80182fdc>] ioread32+0x4/0xc [<81b4c42c>] ath5k_hw_set_sleep_clock+0x2ec/0x474 [ath5k] [<81b4cf28>] ath5k_hw_reset+0x50/0xeb8 [ath5k] [<81b50900>] ath5k_reset+0xd4/0x310 [ath5k] [<81b557e8>] ath5k_config+0x4c/0x104 [ath5k] [<80d01770>] ieee80211_hw_config+0x2f4/0x35c [mac80211] [<80d09aa8>] ieee80211_scan_work+0x2e4/0x414 [mac80211] [<8022c3f4>] process_one_work+0x28c/0x400 [<802df8f8>] worker_thread+0x258/0x3c0 [<801b5710>] kthread+0xe0/0xec [<800418a8>] ret_from_kernel_thread+0x14/0x1c Fix this issue by adding a new status flag, which forbids to re-enable the interrupt generation until the HW configuration is completed. Note: previous patch, which reorders the Rx disable code helps to avoid the above warning, but not fixes the root cause of unexpected frame receiving. CC: Jiri Slaby <jirislaby@gmail.com> CC: Nick Kossifidis <mickflemm@gmail.com> CC: Luis R. Rodriguez <mcgrof@do-not-panic.com> Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com> Tested-by: Christophe Prevotaux <cprevotaux@nltinc.com> Tested-by: Eric Bree <ebree@nltinc.com> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-13ath5k: channel change fixSergey Ryazanov
ath5k updates the channel pointer and after that it stops the Rx logic and apply channel to HW. In case of channel switch, such sequence creates a small window when a frame, which is received on the old channel is considered as a frame received on the new one. The most notable consequence of this situation occurs during the switch from 2 GHz band (CCK+OFDM) to the 5GHz band (OFDM-only). Frame received with CCK rate, e.g. beacon received at the 1mbps, causes the following warning: WARNING: at ath5k/base.c:589 ath5k_tasklet_rx+0x318/0x6ec [ath5k]() invalid hw_rix: 1a [..] Call Trace: [<802656a8>] show_stack+0x48/0x70 [<802dd92c>] warn_slowpath_common+0x88/0xbc [<802dd98c>] warn_slowpath_fmt+0x2c/0x38 [<81b51be8>] ath5k_tasklet_rx+0x318/0x6ec [ath5k] [<8028ac64>] tasklet_action+0x8c/0xf0 [<80075804>] __do_softirq+0x180/0x32c [<80196ce8>] irq_exit+0x54/0x70 [<80041848>] ret_from_irq+0x0/0x4 [<80182fdc>] ioread32+0x4/0xc [<81b4c42c>] ath5k_hw_set_sleep_clock+0x2ec/0x474 [ath5k] [<81b4cf28>] ath5k_hw_reset+0x50/0xeb8 [ath5k] [<81b50900>] ath5k_reset+0xd4/0x310 [ath5k] [<81b557e8>] ath5k_config+0x4c/0x104 [ath5k] [<80d01770>] ieee80211_hw_config+0x2f4/0x35c [mac80211] [<80d09aa8>] ieee80211_scan_work+0x2e4/0x414 [mac80211] [<8022c3f4>] process_one_work+0x28c/0x400 [<802df8f8>] worker_thread+0x258/0x3c0 [<801b5710>] kthread+0xe0/0xec [<800418a8>] ret_from_kernel_thread+0x14/0x1c The easiest way to reproduce this warning is to run scan with dualband NIC in noisy environments, when the channel 11 runs multiple APs. In my tests if the APs num >= 12, the warning appears in the first few seconds of scanning. In order to fix this, the Rx disable code moved to a higher level and placed before the channel pointer update. This is also makes the code a bit more symmetrical, since we disable and enable the Rx in the same function. In fact, at the pointer update time new frames should not appear, because interrupt generation at this point should already be disabled. The next patch should address this issue. CC: Jiri Slaby <jirislaby@gmail.com> CC: Nick Kossifidis <mickflemm@gmail.com> CC: Luis R. Rodriguez <mcgrof@do-not-panic.com> Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com> Tested-by: Christophe Prevotaux <cprevotaux@nltinc.com> Tested-by: Eric Bree <ebree@nltinc.com> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03wireless: Use eth_<foo>_addr instead of memsetJoe Perches
Use the built-in function instead of memset. Miscellanea: Add #include <linux/etherdevice.h> where appropriate Use ETH_ALEN instead of 6 Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-06ath5k: fix spontaneus AR5312 freezesSergey Ryazanov
Sometimes while CPU have some load and ath5k doing the wireless interface reset the whole WiSoC completely freezes. Set of tests shows that using atomic delay function while we wait interface reset helps to avoid such freezes. The easiest way to reproduce this issue: create a station interface, start continous scan with wpa_supplicant and load CPU by something. Or just create multiple station interfaces and put them all in continous scan. This patch partially reverts the commit 1846ac3dbec0 ("ath5k: Use usleep_range where possible"), which replaces initial udelay() by usleep_range(). I do not know actual source of this issue, but all looks like that HW freeze is caused by transaction on internal SoC bus, while wireless block is in reset state. Also I should note that I do not know how many chips are affected, but I did not see this issue with chips, other than AR5312. CC: Jiri Slaby <jirislaby@gmail.com> CC: Nick Kossifidis <mickflemm@gmail.com> CC: Luis R. Rodriguez <mcgrof@do-not-panic.com> Fixes: 1846ac3dbec0 ("ath5k: Use usleep_range where possible") Reported-by: Christophe Prevotaux <c.prevotaux@rural-networks.com> Tested-by: Christophe Prevotaux <c.prevotaux@rural-networks.com> Tested-by: Eric Bree <ebree@nltinc.com> Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-23ath5k: document a fall-through case in ath5k_hw_set_opmodeJohn Linville
Coverity: CID 114932 Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-22Merge commit 'c1e140bf79d817d4a7aa9932eb98b0359c87af33' from mac80211-nextKalle Valo
Patch "ath9k: Fix no-ack frame status" needs these mac80211 patches: commit 5cf16616e152dd5c274a65954c77f64892d025a8 Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> Date: Wed Dec 10 21:26:11 2014 +0530 mac80211: Fix accounting of multicast frames commit 6b127c71fbdd3daacfd8b9f80b8e6ebfb70a889e Author: Sujith Manoharan <c_manoha@qca.qualcomm.com> Date: Wed Dec 10 21:26:10 2014 +0530 mac80211: Move IEEE80211_TX_CTL_PS_RESPONSE Conflicts: drivers/net/wireless/ath/wil6210/cfg80211.c drivers/staging/rtl8723au/os_dep/ioctl_cfg80211.c
2015-01-08cfg80211: remove "channel" from survey namesJohannes Berg
All of the survey data is (currently) per channel anyway, so having the word "channel" in the name does nothing. In the next patch I'll introduce global data to the survey, where the word "channel" is actually confusing. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-06ath5k: drop owner assignment from platform_driversWolfram Sang
This platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-12-11Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is an unusually large pull request for MIPS - in parts because lots of patches missed the 3.18 deadline but primarily because some folks opened the flood gates. - Retire the MIPS-specific phys_t with the generic phys_addr_t. - Improvments for the backtrace code used by oprofile. - Better backtraces on SMP systems. - Cleanups for the Octeon platform code. - Cleanups and fixes for the Loongson platform code. - Cleanups and fixes to the firmware library. - Switch ATH79 platform to use the firmware library. - Grand overhault to the SEAD3 and Malta interrupt code. - Move the GIC interrupt code to drivers/irqchip - Lots of GIC cleanups and updates to the GIC code to use modern IRQ infrastructures and features of the kernel. - OF documentation updates for the GIC bindings - Move GIC clocksource driver to drivers/clocksource - Merge GIC clocksource driver with clockevent driver. - Further updates to bring the GIC clocksource driver up to date. - R3000 TLB code cleanups - Improvments to the Loongson 3 platform code. - Convert pr_warning to pr_warn. - Merge a bunch of small lantiq and ralink fixes that have been staged/lingering inside the openwrt tree for a while. - Update archhelp for IP22/IP32 - Fix a number of issues for Loongson 1B. - New clocksource and clockevent driver for Loongson 1B. - Further work on clk handling for Loongson 1B. - Platform work for Broadcom BMIPS. - Error handling cleanups for TurboChannel. - Fixes and optimization to the microMIPS support. - Option to disable the FTLB. - Dump more relevant information on machine check exception - Change binfmt to allow arch to examine PT_*PROC headers - Support for new style FPU register model in O32 - VDSO randomization. - BCM47xx cleanups - BCM47xx reimplement the way the kernel accesses NVRAM information. - Random cleanups - Add support for ATH25 platforms - Remove pointless locking code in some PCI platforms. - Some improvments to EVA support - Minor Alchemy cleanup" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits) MIPS: Add MFHC0 and MTHC0 instructions to uasm. MIPS: Cosmetic cleanups of page table headers. MIPS: Add CP0 macros for extended EntryLo registers MIPS: Remove now unused definition of phys_t. MIPS: Replace use of phys_t with phys_addr_t. MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig. MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO MIPS: <asm/types.h> fix indentation. MAINTAINERS: Add entry for BMIPS multiplatform kernel MIPS: Enable VDSO randomization MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration MIPS: Remove declaration of obsolete arch_init_clk_ops() MIPS: atomic.h: Reformat to fit in 79 columns MIPS: Apply `.insn' to fixup labels throughout MIPS: Fix microMIPS LL/SC immediate offsets MIPS: Kconfig: Only allow 32-bit microMIPS builds MIPS: signal.c: Fix an invalid cast in ISA mode bit handling MIPS: mm: Only build one microassembler that is suitable ...
2014-12-01ath5k: fix hardware queue index assignmentFelix Fietkau
Like with ath9k, ath5k queues also need to be ordered by priority. queue_info->tqi_subtype already contains the correct index, so use it instead of relying on the order of ath5k_hw_setup_tx_queue calls. Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-24ath5k: update dependenciesSergey Ryazanov
- Use config symbol defined in the driver instead of arch specific one for conditional compilation. - Rename the ATHEROS_AR231X config symbol to ATH25. - Fix include (ar231x_platform.h -> ath25_platform.h). - Some of AR231x SoCs (e.g. AR2315) have PCI bus support, so remove !PCI dependency, which block AHB support build. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Acked-by: John W. Linville <linville@tuxdriver.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: linux-wireless@vger.kernel.org Cc: ath5k-devel@lists.ath5k.org Cc: Linux MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/8248/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-24ath5k: revert AHB bus support removingSergey Ryazanov
This reverts commit 093ec3c5337434f40d77c1af06c139da3e5ba6dc. AHB bus code has been removed, since we did not have support Atheros AR231x SoC, required for building the AHB version of ath5k. Now that support WiSoC chips added we can restore functionality back. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Acked-by: John W. Linville <linville@tuxdriver.com> Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: linux-wireless@vger.kernel.org Cc: ath5k-devel@lists.ath5k.org Cc: Linux MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/8247/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-19mac80211: allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDRJohannes Berg
Allow drivers to support NL80211_SCAN_FLAG_RANDOM_ADDR with software based scanning and generate a random MAC address for them for every scan request with the flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-05Merge tag 'master-2014-10-02' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-10-03 Please pull tihs batch of updates intended for the 3.18 stream! For the iwlwifi bits, Emmanuel says: "I have here a few things that depend on the latest mac80211's changes: RRM, TPC, Quiet Period etc... Eyal keeps improving our rate control and we have a new device ID. This last patch should probably have gone to wireless.git, but at that stage, I preferred to send it to -next and CC stable." For (most of) the Atheros bits, Kalle says: "The only new feature is testmode support from me. Ben added a new method to crash the firmware with an assert for debug purposes. As usual, we have lots of smaller fixes from Michal. Matteo fixed a Kconfig dependency with debugfs. I fixed some warnings recently added to checkpatch." For the NFC bits, Samuel says: "We've had major updates for TI and ST Microelectronics drivers, and a few NCI related changes. For TI's trf7970a driver: - Target mode support for trf7970a - Suspend/resume support for trf7970a - DT properties additions to handle different quirks - A bunch of fixes for smartphone IOP related issues For ST Microelectronics' ST21NFCA and ST21NFCB drivers: - ISO15693 support for st21nfcb - checkpatch and sparse related warning fixes - Code cleanups and a few minor fixes Finally, Marvell added ISO15693 support to the NCI stack, together with a couple of NCI fixes." For the Bluetooth bits, Johan says: "This 3.18 pull request replaces the one I did on Monday ("bluetooth-next 2014-09-22", which hasn't been pulled yet). The additions since the last request are: - SCO connection fix for devices not supporting eSCO - Cleanups regarding the SCO establishment logic - Remove unnecessary return value from logging functions - Header compression fix for 6lowpan - Cleanups to the ieee802154/mrf24j40 driver Here's a copy from previous request that this one replaces: ' Here are some more patches for 3.18. They include various fixes to the btusb HCI driver, a fix for LE SMP, as well as adding Jukka to the MAINTAINERS file for generic 6LoWPAN (as requested by Alexander Aring). I've held on to this pull request a bit since we were waiting for a SCO related fix to get sorted out first. However, since the merge window is getting closer I decided not to wait for it. If we do get the fix sorted out there'll probably be a second small pull request later this week. '" And, "Unless 3.17 gets delayed this will probably be our last -next pull request for 3.18. We've got: - New Marvell hardware supportr - Multicast support for 6lowpan - Several of 6lowpan fixes & cleanups - Fix for a (false-positive) lockdep warning in L2CAP - Minor btusb cleanup" On top of all that comes the usual sort of updates to ath5k, ath9k, ath10k, brcmfmac, mwifiex, and wil6210. This time around there are also a number of rtlwifi updates to enable some new hardware and to reconcile the in-kernel drivers with some newer releases of the Realtek vendor drivers. Also of note is some device tree work for the bcma bus. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-30ath5k: add missing include for debug codeFelix Fietkau
Needed for calling vmalloc()/vfree() Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-26Merge tag 'master-2014-09-16' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== pull request: wireless-next 2014-09-22 Please pull this batch of updates intended for the 3.18 stream... For the mac80211 bits, Johannes says: "This time, I have some rate minstrel improvements, support for a very small feature from CCX that Steinar reverse-engineered, dynamic ACK timeout support, a number of changes for TDLS, early support for radio resource measurement and many fixes. Also, I'm changing a number of places to clear key memory when it's freed and Intel claims copyright for code they developed." For the bluetooth bits, Johan says: "Here are some more patches intended for 3.18. Most of them are cleanups or fixes for SMP. The only exception is a fix for BR/EDR L2CAP fixed channels which should now work better together with the L2CAP information request procedure." For the iwlwifi bits, Emmanuel says: "I fix here dvm which was broken by my last pull request. Arik continues to work on TDLS and Luca solved a few issues in CT-Kill. Eyal keeps digging into rate scaling code, more to come soon. Besides this, nothing really special here." Beyond that, there are the usual big batches of updates to ath9k, b43, mwifiex, and wil6210 as well as a handful of other bits here and there. Also, rtlwifi gets some btcoexist attention from Larry. Please let me know if there are problems! ==================== Had to adjust the wil6210 code to comply with Joe Perches's recent change in net-next to make the netdev_*() routines return void instead of 'int'. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26ath5k: Remove AHB bus supportPaul Bolle
AHB bus support was added in v2.6.38, through commit a0b907ee2a71 ("ath5k: Add AHB bus support."). That code can only be build if the Kconfig symbol ATHEROS_AR231X is set. But that symbol has never been added to the tree. So AHB bus support has always been dead code. Let's remove all code that depends on ATHEROS_AR231X. If that symbol ever gets added to the tree the AHB bus support can be re-added too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15Merge tag 'mac80211-next-for-john-2014-09-12' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg <johannes@sipsolutions.net> says: "This time, I have some rate minstrel improvements, support for a very small feature from CCX that Steinar reverse-engineered, dynamic ACK timeout support, a number of changes for TDLS, early support for radio resource measurement and many fixes. Also, I'm changing a number of places to clear key memory when it's freed and Intel claims copyright for code they developed." Conflicts: net/mac80211/iface.c Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09ath5k: Add missing vmalloc.h include.Stephen Rothwell
After merging the wireless-next tree, today's linux-next build (powerpc allyesconfig) failed like this: drivers/net/wireless/ath/ath5k/debug.c: In function 'open_file_eeprom': drivers/net/wireless/ath/ath5k/debug.c:933:2: error: implicit declaration of function 'vmalloc' [-Werror=implicit-function-declaration] buf = vmalloc(eesize); ^ drivers/net/wireless/ath/ath5k/debug.c:933:6: warning: assignment makes pointer from integer without a cast buf = vmalloc(eesize); ^ drivers/net/wireless/ath/ath5k/debug.c:960:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration] vfree(buf); ^ Caused by commit db906eb2101b ("ath5k: added debugfs file for dumping eeprom"). Also reported by Guenter Roeck. I have used Geert Uytterhoeven's suggested fix of including vmalloc.h and so added this patch for today: From: Stephen Rothwell <sfr@canb.auug.org.au> Date: Mon, 8 Sep 2014 18:39:23 +1000 Subject: [PATCH] ath5k: fix debugfs addition Reported-by: Guenter Roeck <linux@roeck-us.net> Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-05mac80211: extend set_coverage_class signatureLorenzo Bianconi
Extend mac80211 set_coverage_class API in order to enable ACK timeout estimation algorithm (dynack) passing coverage class equals to -1 to lower drivers. Synchronize set_coverage_class routine signature with mac80211 function pointer for p54, ath9k, ath9k_htc and ath5k drivers. Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-04ath5k: added debugfs file for dumping eepromJade Bilkey
Signed-off-by: Jade Bilkey <herself@thefumon.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath5k: remove redundant null check before kfree()Bob Copeland
kfree() null-checks its argument. Found by smatch. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath5k: ensure led name is null terminatedBob Copeland
Add the missing null termination after strncpy(). This isn't actually a buffer overflow in this case since we use snprintf() appropriately to fill the buffer passed by the caller, but in the interest of not turning this into a bug down the road, go ahead and force termination here. Found by Coverity. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath5k: drop useless comparisonBob Copeland
rxs->rate_idx is unsigned, so it will always be >= 0. Found by Coverity. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-07-01ath5k: capture CCK and OFDM restartsMathy Vanhoef
Treat frames that underwent a CCK or OFDM restart as frames with an invalid CRC. Signed-off-by: Mathy Vanhoef <vanhoefm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-01ath5k: support for FIF_FCSFAIL filterMathy Vanhoef
When the FIF_FCSFAIL filter flag is set, pass frames with CRC errors. Signed-off-by: Mathy Vanhoef <vanhoefm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-04-30ath5k: Fix AR5K_PHY_TXPOWER_RATE_MAX register value setting.Nickolay Ledovskikh
I was reading ath5k power setting code and noticed typing error in ath5k_hw_txpower function. Invalid value was written to AR5K_PHY_TXPOWER_RATE_MAX register. Signed-off-by: Nikolay Ledovskikh <nledovskikh@gmail.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-14ath5k: add missing dma_map_error callJohn Greene
Trivial patch to address this trace. Now calls dma_mapping_error and return -ENOSPC if a problem found. WARNING: at lib/dma-debug.c:933 check_unmap+0x47b/0x960() Hardware name: Aspire 5515 ath5k 0000:02:00.0: DMA-API: device driver failed to check map error[device address=0x00000000874fcd42] [size=45 bytes] [mapped as single] Modules linked in: bnep bluetooth ebtable_filter ebtables ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi arc4 snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device ath5k ath snd_pcm sparse_keymap snd_page_alloc mac80211 snd_timer sp5100_tco snd edac_core k8temp soundcore edac_mce_amd i2c_piix4 cfg80211 rfkill shpchp vhost_net tun macvtap macvlan kvm_amd kvm uinput dm_crypt ata_generic pata_acpi radeon i2c_algo_bit pata_atiixp drm_kms_helper ttm drm r8169 mii i2c_core wmi video sunrpc Pid: 820, comm: firewalld Not tainted 3.9.0-0.rc3.git1.4.fc19.x86_64 #1 Call Trace: <IRQ> [<ffffffff81068df0>] warn_slowpath_common+0x70/0xa0 [<ffffffff81068e6c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff8137ebeb>] check_unmap+0x47b/0x960 [<ffffffff81021cf5>] ? native_sched_clock+0x15/0x80 [<ffffffff81021d69>] ? sched_clock+0x9/0x10 [<ffffffff8137f12f>] debug_dma_unmap_page+0x5f/0x70 [<ffffffffa048fa07>] ath5k_tasklet_tx+0x157/0x3f0 [ath5k] [<ffffffff810acc0d>] ? sched_clock_local+0x1d/0x80 [<ffffffff81072aa6>] ? tasklet_action+0x56/0x210 [<ffffffff81072ae7>] tasklet_action+0x97/0x210 [<ffffffff8107343f>] __do_softirq+0xff/0x400 [<ffffffff81073905>] irq_exit+0xb5/0xc0 [<ffffffff81728916>] do_IRQ+0x56/0xc0 [<ffffffff8171dc32>] common_interrupt+0x72/0x72 <EOI> [<ffffffff811f1f81>] ? dput+0x111/0x310 [<ffffffff811f1ea7>] ? dput+0x37/0x310 [<ffffffff811e75e8>] link_path_walk+0x528/0x910 [<ffffffff811ea624>] path_openat+0x94/0x530 [<ffffffff811eb148>] do_filp_open+0x38/0x80 [<ffffffff811e1dda>] open_exec+0x4a/0x130 [<ffffffff81238be3>] load_elf_binary+0x7f3/0x18e0 [<ffffffff81021d69>] ? sched_clock+0x9/0x10 [<ffffffff810acc0d>] ? sched_clock_local+0x1d/0x80 [<ffffffff810acd98>] ? sched_clock_cpu+0xa8/0x100 [<ffffffff810d515d>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff810acedf>] ? local_clock+0x5f/0x70 [<ffffffff810d5dbf>] ? lock_release_holdtime.part.28+0xf/0x190 [<ffffffff812383f0>] ? elf_core_dump+0x1980/0x1980 [<ffffffff811e1151>] search_binary_handler+0x1a1/0x4f0 [<ffffffff811e1017>] ? search_binary_handler+0x67/0x4f0 [<ffffffff811e28fc>] do_execve_common.isra.26+0x64c/0x710 [<ffffffff811e23c2>] ? do_execve_common.isra.26+0x112/0x710 [<ffffffff811e2cc6>] sys_execve+0x36/0x50 [<ffffffff81727249>] stub_execve+0x69/0xa0 Signed-off-by: John Greene <jogreene@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 05:23:08 +0000